Detection of moving targets in wideband SAR

A likelihood ratio is proposed for moving target detection in a wideband (WB) synthetic aperture radar (SAR) system. WB is defined here as any systems having a large fractional bandwidth, i.e., an ultra wide frequency band combined with a wide antenna beam. The developed method combines time-domain fast backprojection SAR processing methods with moving target detection using space-time processing. The proposed method reduces computational load when sets of relative speeds can be tested using the same clutter-suppressed subaperture beams. The proposed method is tested on narrowband radar data.     

Multiple moving target feature extraction for airborne HRR radar

This study considers the clutter suppression and feature extraction of multiple moving targets for airborne high range resolution (HRR) phased array radar. To avoid the range migration problems that occur in the HRR radar data, we divide each HRR profile into nonoverlapping low range resolution segments. No information is lost due to the division and hence no loss of resolution occurs. We show how to use a vector auto-regressive filtering technique to suppress the clutter. Then a relaxation-based parameter estimation algorithm is presented for multiple moving target feature extraction. Numerical results are given to demonstrate the effectiveness of the algorithm     

Resolution and synthetic aperture characterization of sparse radar arrays

The concept of radar satellite constellations, or clusters, for synthetic aperture radar (SAR), moving target indicator (MTI), and other radar modes has been proposed and is currently under research. These constellations form an array that is sparsely populated and irregularly spaced; therefore, traditional matched filtering is inadequate for dealing with the constellation's radiation pattern. To aid in the design, analysis, and signal processing of radar satellite constellations and sparse arrays in general, the characterization of the resolution and ambiguity functions of such systems is investigated. We project the radar's received phase history versus five sensor parameters: time, frequency, and three-dimensional position, into a phase history in terms of two eigensensors that can be interpreted as the dimensions of a two-dimensional synthetic aperture. Then, the synthetic aperture expression is used to derive resolution and the ambiguity function. Simulations are presented to verify the theory.     

Knowledge-based space-time adaptive processing for airborne earlywarning radar

This paper describes an innovative concept for knowledge-based control of space-time adaptive processing (STAP) for airborne early warning radar. The knowledge-based approach holds potential for significant performance improvements over classical STAP processing in nonhomogeneous environments by taking advantage of a priori knowledge. Under this approach, knowledge-based control is used to direct pre-adaptive filtering, and to carefully select STAP algorithms, parameters, and secondary data cells     

高距离分辨率的低截获概率雷达信号性能研究

首先,分析步进频率雷达信号实现高分辨率的优缺点,在此基础上设计了一种改进的步进频率信号-参差脉冲重复间隔步进频率信号;然后,分析了该信号的处理过程。与步进频率信号在高速目标下成像失真相比,参差脉冲重复间隔步进频率信号的多普勒性能有了很明显的改善。最后,分析了参差脉冲重复间隔步进频率信号的低截获概率特性。     

Moving target detection via airborne HRR phased array radar

We study moving target detection in the presence of temporally and spatially correlated ground clutter for airborne high range resolution (HRR) phased array radar. We divide the HRR range profiles into large range segments to avoid the range migration problems that occur in the HRR radar data. Since each range segment contains a sequence of HRR range bins, no information is lost due to the division and hence no loss of resolution occurs. We show how to use a vector autoregressive (VAR) filtering technique to suppress the ground clutter. Then a moving target detector based on a generalized likelihood ratio test (GLRT) detection strategy is derived. The detection threshold is determined according to the desired false alarm rate, which is made possible via an asymptotic statistical analysis. After the target Doppler frequency and spatial signature vectors are estimated from the VAR-filtered data as if a target were present, a simple detection variable is computed and compared with the detection threshold to render a decision on the presence of a target. Numerical results are provided to demonstrate the performance of the proposed moving target detection algorithm     

机载MIMO雷达空时自适应杂波对消器

针对机载多输入多输出(MIMO)雷达杂波分布呈现空时耦合特性,提出一种空时自适应杂波对消器.利用机载MIMO雷达的脉冲回波数据,构造杂波对消器的系数矩阵.通过空时自适应杂波对消器的预处理,可以有效地抑制杂波,并通过与常规空时处理算法的级联,最终可以有效提高动目标的检测性能.实现了由传统地基雷达杂波对消器向机载运动平台的推广.仿真结果表明,这种自适应杂波对消器不仅适用于正侧视雷达,对于非正侧视雷达也同样适用.     

方位维逆合成孔径雷达(ISAR)运动补偿成象中的预加处理

在方位维逆合成孔径雷达（ISAR）运动补偿成象中,为了获得方位维的高分辨力,需要处理的数据量很大。预加处理首先对原始数据进行频移和滤波,然后由滤波后的数据进行抽取,从而大大压缩了所需处理的数据,减小了运动补偿和成象的计算量,提高了成象处理速度。电磁仿真数据和外场实测数据的处理结果验证了预加处理的有效性。     

On the Accuracy And Resolution of Radar Signals

Information matrices are derived for estimates of the range parameters of moving targets as obtained by combining a priori information (if available) with reflected radar signals observed in the presence of additive white Gaussian noise. The inverse of the information matrix provides a lower bound on the covariance matrix of any unbiased parameter estimates. This bound can be approached with a high signal-to-noise ratio and optimum data processing (matched filters). Arbitrary frequency modulation, amplitude modulation, and target motion as well as various assumptions on processing the RF phase are considered. The multiple-target case makes possible investigation of a signal's resolution ability, as well as its accuracy potentials. Results for a carrier frequency much greater than the effective signal bandwidth are obtained as a special case. A main purpose of the paper is the reduction of the original radar problem to a linear model which is equivalent in the sense of having the same information matrix. These models provide valuable insight into the relative effects of multiple targets, choice of modulation, a priori information, and assumptions regarding RF phase and bandwidth. The linear equivalent model also leads to a valuable computational algorithm for investigations using digital or hybrid computers. The various special cases of interest are obtained by simple modifications of the general case, and thus the algorithm can provide a very versatile tool for evaluating and designing radar signals.     

基于S变换的时频特征提取与目标识别

目标的时间-频率联合分布能够很好地反映目标物理结构特征,可以作为雷达目标识别的一个有效手段。针对现有时频分析方法存在的识别率低和抗噪性能差等问题,提出一种基于S变换的空间目标回波信号电磁特征提取与识别方法。首先对目标的雷达回波进行时频分析,得出在较大方位角变化范围内和不同信噪比情况下,目标S变换的时频分布具有相对不变性的结论;然后基于这种稳定的时频分布特征,采用最小贴近度的方法进行分类识别。针对不同目标模型的仿真结果表明,该方法的识别率高于其他时频分析方法并且具有很好的鲁棒性。     

Framework and Taxonomy for Radar Space-Time Adaptive Processing (STAP) Methods

The goal of radar space-time adaptive processing (STAP) is to detect slow moving targets from a moving platform, typically airborne or spaceborne. STAP generally requires the estimation and the inversion of an interference-plus-noise (I+N) covariance matrix. To reduce both the number of samples involved in the estimation and the computational cost inherent to the matrix inversion, many suboptimum STAP methods have been proposed. We propose a new canonical framework that encompasses all suboptimum STAP methods we are aware of. The framework allows for both covariance-matrix (CM) estimation and range-dependence compensation (RDC); it also applies to monostatic and bistatic configurations. Finally, we discuss a taxonomy for classifying the methods described by the framework.     

Target motion compensation in synthetic aperture radar

In a synthetic aperture radar (SAR) targets on the ground that are moving become smeared as a result of velocity components parallel to the motion of the radar and are moved to radically different angular positions if they have velocity components perpendicular to the motion of the radar. Methods for restoring moving targets to their correct size and position are described. The samples collected for SAR processing are frequency-modulated RF pulses. Mathematically this leads to spectra that are described by Fresnel integrals. For stationary targets, the spectrum is symmetrical around the origin. If there is a moving target in a range cell, its Doppler spectrum will be displaced from the origin and may undergo other changes as a result of its nonzero velocity. Proper compensation to locate the target at the correct position requires that the spectrum be translated to a position dependent on the along-track velocity rather than to the origin. From the central frequency, the along-range velocity component can be estimated and the length of the translation can then be found. After translation, the spectrum is converted back to the time domain and the customary SAR processing is performed     

Separation of target rigid body and micro-doppler effects in ISAR imaging

Micro-Doppler (m-D) effect is caused by moving parts of the radar target. It can cover rigid parts of a target and degrade the inverse synthetic aperture radar (ISAR) image. Separation of the patterns caused by stationary parts of the target from those caused by moving (rotating or vibrating) parts is the topic of this paper. Two techniques for separation of the rigid part from the rotating parts have been proposed. The first technique is based on time-frequency (TF) representation with sliding window and order statistics techniques. The first step in this technique is recognition of rigid parts in the range/cross-range plane. In the second step, reviewed TF representation and order statistics setup are employed to obtain signals caused by moving parts. The second technique can be applied in the case of very emphatic m-D effect. In the first step the rotating parts are recognized, based on the inverse Radon transform (RT). After masking these patterns, a radar image with the rigid body reflection can be obtained. The proposed methods are illustrated by examples     

Comparison between monostatic and bistatic antenna configurationsfor STAP

The unique characteristics of bistatic radar operation on the performance of airborne/spaceborne moving target indicator (MTI) radars that use space-time adaptive processing (STAP) are discussed. It has been shown that monostatic STAP radar has the following properties. 1) For a horizontal flight path and a planar Earth the curves of constant clutter Doppler (isodops) are hyperbolas. 2) For a sidelooking antenna geometry the clutter Doppler is range independent. 3) Clutter trajectories in the cosφ-F plane (F=normalized Doppler) are in general ellipses (or straight lines for a sidelooking array). We demonstrate that these well-known properties are distorted by the displacement between transmitter and receiver in a bistatic configuration. It is shown that even for the sidelooking array geometry the clutter Doppler is range-dependent which requires adaptation of the STAP processor for each individual range gate. Conclusions for the design of STAP processors are drawn     

Multiple moving target detection and trajectory estimation using a single SAR sensor

A novel methodology is presented for determining the velocity and location of multiple moving targets using a single strip-map synthetic aperture radar (SAR) sensor. The so-called azimuth position uncertainty problem is therefore solved. The method exploits the structure of the amplitude and phase modulations of the returned echo from a moving target in the Fourier domain. A crucial step in the whole processing scheme is a matched filtering, depending on the moving target parameters, that simultaneously accounts for range migration and compresses two-dimensional signatures into one-dimensional ones without losing moving target information. A generalized likelihood ratio test approach is adopted to detect moving targets and derive their trajectory parameters. The effectiveness of the method is illustrated with synthetic and real data covering a wide range of targets velocities and signal-to-clutter ratios (SCRs). Even in the case of parallel to platform moving target motion, the most unfavorable scenario, the proposed method yields good results for, roughly, SCR > 10 dB.     

Performance bounds for hot and cold clutter mitigation

A new method is presented for describing the theoretical interference space-time covariance matrix that will be observed in an adaptive airborne radar system under specific topographical conditions. Both hot clutter that is induced by interfering sources and cold clutter that results from the radar transmitter are considered. This method incorporates phenomenology observed under site specific conditions as well as system effects such as array geometry, receiver filtering, and system bandwidth. Use of this formulation rather than sample data analyses that are generally employed enables one to infer performance bounds for site-specific, and thus generally, heterogeneous terrain that are tighter and therefore more meaningful than the thermal noise floor limit     

Reduced-rank STAP performance analysis

The space-time radar problem is well suited to the application of techniques that take advantage of the low-rank property of the space-time covariance matrix. It is shown that reduced-rank (RR) methods outperform full-rank space-time adaptive processing (STAP) when the space-time covariance matrix is estimated from a data set with limited support. The utility of RR methods is demonstrated by theoretical analysis, simulations and analysis of real data. It is shown that RR processing has two opposite effects on the performance: increased statistical stability which tends to improve performance, and introduction of a bias which lowers the signal-to-noise ratio (SNR). A method for evaluating the theoretical conditioned SNR for fixed RR transforms is also presented. It Is shown that while best performance is obtained using data-dependent transforms, the loss incurred by the application of fixed transforms (such as the discrete cosine transform) may be relatively small. The main advantage of fixed transforms is the availability of efficient computational procedures for their implementation. These findings suggest that RR methods could facilitate the development of practical, real-time STAP technology     

Design of a space-based radar signal processor

Space-based radar (SBR) is capable of providing flexible wide-area coverage of air, land, and sea targets. Numerous studies have been carried out in the United States and Canada in recent years to investigate different concepts for SBR. The design of a suitable radar signal processor (RSP) is challenging due to the effects caused by the moving platform on target integration and clutter spectral spread. A candidate RSP is described that uses a corporate fed array (CFA) antenna as its primary radar sensor. The algorithmic definitions of the signal processing functions are provided; the relationships between these functions and the reasons for their location in the signal processing chain are also discussed. In addition, techniques for reducing the computational requirements are also presented     

Radar beamwidth reduction techniques

It is essential and desirable to get a high resolution echo in a radar image without using a large antenna. On scanning a radar antenna, the target's distribution is smoothed by the antenna beam and a smeared echo appears on the radar display. This paper describes three different types of beam compression radars: subsurface SAR; correlation array radar; and inversion processed radar. The experimental results show that the beamwidth on display was effectively compressed by the signal processing     

基于功率特征分组的空时自适应脉冲干扰抑制方法CSCD

脉冲干扰是一种常见的导航干扰类型,具有高带宽、突发性等特点,针对脉冲干扰的抑制具有较大难度。常规空时自适应处理不对接收信号类型进行区分,而是统一进行协方差矩阵估计及权值计算,存在抗脉冲干扰性能下降或失效的可能。针对以上问题,提出了一种基于功率特征分组的空时自适应处理方法。首先对接收数据进行功率检测,将信号采样数据分为有干扰数据组和无干扰数据组,然后对分组后的数据分别进行权值计算和滤波处理,最后将滤波后的数据按照采样顺序进行合并。该方法通过数据分组,提高了干噪比的统计计算准确度,增加了干扰零陷深度,实现了抗干扰能力的提升。理论分析和仿真实验均证明了该方法的有效性。