The Genesis mission: unifying science and engineering

Design of the Genesis spacecraft mission was derived from top-down flow of a basic and highly challenging science requirement: obtain samples of solar matter of such high quality and low background that they would sustain investigations of chemical and isotopic composition of the solar system for the coming decades, and well into the 21^st Century. Within the framework of several dozen competing mission concepts for planetary exploration under NASA's Discovery program, Genesis needed to perform extremely high quality science (solar collection and sample return) for an affordable yet realistic level of effort. Key issues included preservation of collector cleanliness, avoidance of spacecraft-generated con-tamination, control of collector temperatures, simplicity of long-term operation, ability to efficiently reach the L1 operations point, reliability of avionics and other support systems, return to a specific landing locale on Earth, and provision for soft capture of the descent capsule via mid-air parachute snatch. Genesis is now in the final stages of spacecraft testing and system validation, the culmination of a highly interwoven effort to meet science objectives with innovative solutions that also satisfy engineering challenges for reliability, affordability, rapid development and a comprehensive test program. Genesis is scheduled for launch in February 2001.     

嫦娥五号平动点拓展任务轨道方案研究

中国嫦娥五号探测器成功实现月球采样返回任务,为最大限度利用任务资源,研究了利用嫦娥五号轨道器的平动点拓展任务轨道方案,设计了平动点轨道及其转移轨道.首先,给出了任务轨道设计的轨道动力学模型,包括圆型限制性三体问题模型和精确力模型.其次,基于嫦娥二号和嫦娥5T1平动点拓展任务设计经验,介绍了平动点轨道直接转移与入轨等轨道...     

Combining solar science and asteroid science with the space weather observation network (SWON)

The peculiarity of space weather for Earth orbiting satellites, air traffic and power grids on Earth and especially the financial and operational risks posed by damage due to space weather, underline the necessity of space weather observation. The importance of such observations is even more increasing due to the impending solar maximum. In recognition of this importance we propose a mission architecture for solar observation as an alternative to already published mission plans like Solar Probe (NASA) or Solar Orbiter (ESA). Based upon a Concurrent Evaluation session in the Concurrent Engineering Facility of the German Aerospace Center, we suggest using several spacecraft in an observation network. Instead of placing such spacecraft in a solar orbit, we propose landing on several asteroids, which are in opposition to Earth during the course of the mission and thus allow observation of the Sun's far side. Observation of the far side is especially advantageous as it improves the warning time with regard to solar events by about 2 weeks. Landing on Inner Earth Object (IEO) asteroids for observation of the Sun has several benefits over traditional mission architectures. Exploiting shadowing effects of the asteroids reduces thermal stress on the spacecraft, while it is possible to approach the Sun closer than with an orbiter. The closeness to the Sun improves observation quality and solar power generation, which is intended to be achieved with a solar dynamic system. Furthermore landers can execute experiments and measurements with regard to asteroid science, further increasing the scientific output of such a mission. Placing the spacecraft in a network would also benefit the communication contact times of the network and Earth. Concluding we present a first draft of a spacecraft layout, mission objectives and requirements as well as an initial mission analysis calculation.     

The Suess-Urey mission (return of solar matter to Earth)

The Suess-Urey (S-U) mission has been proposed as a NASA Discovery mission to return samples of matter from the Sun to the Earth for isotopic and chemical analyses in terrestrial laboratories to provide a major improvement in our knowledge of the average chemical and isotopic composition of the solar system. The S-U spacecraft and sample return capsule will be placed in a halo orbit around the L1 Sun-Earth libration point for two years to collect solar wind ions which implant into large passive collectors made of ultra-pure materials. Constant Spacecraft-Sun-Earth geometries enable simple spin stabilized attitude control, simple passive thermal control, and a fixed medium gain antenna. Low data requirements and the safety of a Sun-pointed spinner, result in extremely low mission operations costs.     

One optimization problem for trajectories of spacecraft rendezvous mission to a group of asteroids

The optimization problem is considered for the trajectory of a spacecraft mission to a group of asteroids. The ratio of the final spacecraft mass to the flight time is maximized. The spacecraft is controlled by changing the value and direction of the jet engine thrust (small thrust). The motion of the Earth, asteroids, and the spacecraft proceeds in the central Newtonian gravitational field of the Sun. The Earth and asteroids are considered as point objects moving in preset elliptical orbits. The spacecraft departure from the Earth is considered in the context of the method of a point-like sphere of action, and the excess of hyperbolic velocity is limited. It is required sequentially to have a rendezvous with asteroids from four various groups, one from each group; it is necessary to be on the first three asteroids for no less than 90 days. The trajectory is finished by arrival at the last asteroid. Constraints on the time of departure from the Earth, flight duration, and final mass are taken into account in this problem.     

Novel mission concepts for polar coverage: An overview of recent developments and possible future applications

The paper provides a survey of novel mission concepts for continuous, hemispheric polar observation and direct-link polar telecommunications. It is well known that these services cannot be provided by traditional platforms: geostationary satellites do not cover high-latitude regions, while low- and medium-orbit Sun-synchronous spacecraft only cover a narrow swath of the Earth at each passage. Concepts that are proposed in the literature are described, including the pole-sitter concept (in which a spacecraft is stationary above the pole), spacecraft in artificial equilibrium points in the Sun–Earth system and non-Keplerian polar Molniya orbits. Additionally, novel displaced eight-shaped orbits at Lagrangian points are presented. For many of these concepts, a continuous acceleration is required and propulsion systems include solar electric propulsion, solar sail and a hybridisation of the two. Advantages and drawbacks of each mission concept are assessed, and a comparison in terms of high-latitude coverage and distance, spacecraft mass, payload and lifetime is presented. Finally, the paper will describe a number of potential applications enabled by these concepts, focusing on polar Earth observation and telecommunications.     

Rosetta: The ESA comet rendezvous mission

Rosetta was selected in November 1993 for the ESA Cornerstone 3 mission, to be launched in 2003, dedicated to the exploration of the small bodies of the solar system (asteroids and comets). Following this selection, the Rosetta mission and its spacecraft have been completely reviewed: this paper presents the studies performed the proposed mission and the resulting spacecraft design.

Three mission opportunities have been identified in 2003–2004, allowing rendezvous with a comet. From a single Ariane 5 launch, the transfer to the comet orbit will be supported by planetary gravity assists (two from Earth, one from Venus or Mars); during the transfer sequence, two asteroid fly-bys will occur, allowing first mission science phases. The comet rendezvous will occur 8–9 years after launch; Rosetta will orbit around the comet and the main science mission phase will take place up to the comet perihelion (1–2 years duration).

The spacecraft design is driven (i) by the communication scenario with the Earth and its equipment, (ii) by the autonomy requirements for the long cruise phases which are not supported by the ground stations, (iii) by the solar cells solar array for the electrical power supply and (iv) by the navigation scenario and sensors for cruise, target approach and rendezvous phases. These requirements will be developed and the satellite design will be presented.     

System design of the Hayabusa 2—Asteroid sample return mission to 1999 JU3

The Japan Aerospace Exploration Agency is currently developing the second asteroid sample return mission, designated as Hayabusa 2. Following the successful return of Hayabusa from the asteroid “Itokawa”, Hayabusa 2 is designed as a round-trip mission to the asteroid “1999 JU3”. The 1999 JU3 is a C-type asteroid, which is believed to contain organic matter and hydrated minerals. Thus, it is expected that successful sample collection will provide additional knowledge on the origin and evolution of the planets and, in particular, the origin of water and organic matter. The current mission scenario will enable the spacecraft to reach 1999 JU3 in the middle of 2018 and perform an asteroid proximity operation for 1.5 years. Three touch downs for sampling and one 2-m-class crater generation by means of a high-speed impact operation are planned during the asteroid proximity operation. The samples are to be brought back to the Earth by a re-entry capsule. The present paper describes the system design of Hayabusa 2, some key technical challenges of the mission, and the development status.     

Applications of multi-body dynamical environments: The ARTEMIS transfer trajectory design

The application of forces in multi-body dynamical environments to permit the transfer of spacecraft from Earth orbit to Sun–Earth weak stability regions and then return to the Earth–Moon libration (L₁ and L₂) orbits has been successfully accomplished for the first time. This demonstrated that transfer is a positive step in the realization of a design process that can be used to transfer spacecraft with minimal Delta-V expenditures. Initialized using gravity assists to overcome fuel constraints; the ARTEMIS trajectory design has successfully placed two spacecrafts into Earth–Moon libration orbits by means of these applications.     

Flight demonstration of formation flying capabilities for future missions (NEAT pathfinder)

PRISMA is a demonstration mission for formation-flying and on-orbit-servicing critical technologies that involves two spacecraft launched in low Earth orbit in June 2010 and still in operation. Funded by the Swedish National Space Board, PRISMA mission has been developed by OHB-Sweden (formerly Swedish Space Corporation) with important contributions from the German Aerospace Centre (DLR/GSOC), the French Space Agency (CNES), and the Technical University of Denmark (DTU). The paper focuses on the last CNES experiment achieved in September 2012 that was devoted to the preparation of future astrometry missions illustrated by the NEAT and µ-NEAT mission concepts. The experiment consisted of performing the type of formation maneuvers required to point the two-satellite axis to a celestial target and maintain it fixed during the observation period. Achieving inertial pointing for a LEO formation represented a new challenge given the numerous constraints from propellant usage to star tracker blinding. The paper presents the experiment objectives in relation with the NEAT/µ-NEAT mission concept, describes its main design features along with the guidance and control algorithms evolutions and discusses the results in terms of performances achieved during the two rehearsals.     

About one problem of trajectory optimization

The optimization problem for trajectories of spacecraft flight from the Earth to an asteroid is considered in this paper. The flight is realized in the central Newtonian gravitational field of the Sun with a possibility of gravitational maneuvers near planets. Perturbation maneuvers are taken into account using the method of point area of action with a limitation on the flyby altitude. The spacecraft is controlled by changing the value and direction of the engine thrust. The problem is solved taking into account constraints on the launch time, flight duration, and minimum distance to the Sun.     

地月平动点拟周期轨道探测器自主导航方法研究

地月L2点的拟周期轨道可以用于实现与月球背面的持续通信,具有重要的科学研究价值和广阔的应用前景。针对地月L2点探测器所处的弱稳定拟周期轨道,论证了基于日地月信息的自主导航方法的可行性,并进行了深入分析。首先,推导了会合坐标系下带有星历的精确导航动力学方程;其次,针对弱稳定轨道不同于近地强稳定轨道的特性,在基于日地月方位信息导航的基础上,提出了三种敏感器组合方案。使用迭代最小二乘方法给出导航仿真结果,并结合非线性可辨识性理论对这三种情况下历元状态的可辨识性及可辨识度进行分析。最后,仿真结果表明,使用日地月敏感器以及对地多普勒雷达可以满足历元状态的可辨识性、导航的收敛性以及系统经济性的要求。     

Optimization of space orbits design for Earth orbiting missions

In Earth orbiting space missions, the orbit selection dictates the mission parameters like the ground resolution, the area coverage, and the frequency of coverage parameters. To achieve desired mission parameters, usually Earth regions of interest are identified and the spacecraft is maneuvered continuously to visit only these regions. This method is expensive, it requires a propulsion system onboard the spacecraft, working throughout the mission lifetime. It also requires a longer time to cover all the regions of interest, due to the very weak thrust forces compared to that of the Earth's gravitational field. This paper presents a methodology to design natural orbits, in which the regions of interest are visited without the use of propulsion systems, depending only on the gravitational forces. The problem is formulated as an optimization problem. A genetic algorithm along with a second order gradient method is implemented for optimization. The design process takes into consideration the gravitational second zonal harmonic, and hence allows for the design of repeated Sun-synchronous orbits. The field of view of the payload is also taken into consideration in the optimization process. Numerical results are presented that demonstrates the efficiency of the proposed method.     

Europa Lander

A Europa Lander mission has been assigned high priority for the post-2005 time frame in NASA's Space Science Enterprise Strategic Plan. Europa is one of the most scientifically interesting objects in the solar system because of the strong possibility that a liquid water ocean exists underneath its ice-covered surface. The primary scientific goals of the proposed Europa Lander mission are to characterize the surface material from a recent outflow and look for evidence of pre-biotic and possibly biotic chemistry. The baseline mission concept involves landing a single spacecraft on the surface of Europa with the capability to acquire samples of material, perform detailed chemical analysis of the samples, and transmit the results to Earth. This paper provides a discussion of the benefits and status of the key spacecraft and instrument technologies needed to accomplish the science objectives. Also described are variations on the baseline concept including the addition of small auxiliary probes and an experimental ice penetration probe.     

The deep space 1 extended mission

The primary mission of Deep Space 1 (DS1), the first flight of the New Millennium program, completed successfully in September 1999, having exceeded its objectives of testing new, high-risk technologies important for future space and Earth science missions. DS1 is now in its extended mission, with plans to take advantage of the advanced technologies, including solar electric propulsion, to conduct an encounter with comet 19P/Borrelly in September 2001. During the extended mission, the spacecraft's commercial star tracker failed; this critical loss prevented the spacecraft from achieving three-axis attitude control or knowledge. A two-phase approach to recovering the mission was undertaken. The first involved devising a new method of pointing the high-gain antenna to Earth using the radio signal received at the Deep Space Network as an indicator of spacecraft attitude. The second was the development of new flight software that allowed the spacecraft to return to three-axis operation without substantial ground assistance. The principal new feature of this software is the use of the science camera as an attitude sensor. The differences between the science camera and the star tracker have important implications not only for the design of the new software but also for the methods of operating the spacecraft and conducting the mission. The ambitious rescue was fully successful, and the extended mission is back on track.     

The Voyager Interstellar Mission

The Voyager Interstellar Mission began on January 1, 1990, with the primary objective being to characterize the interplanetary medium beyond Neptune and to search for the transition region between the interplanetary medium and the interstellar medium. At the start of this mission, the two Voyager spacecraft had already been in flight for over twelve years, having successfully returned a wealth of scientific information about the planetary systems of Jupiter, Saturn, Uranus, and Neptune, and the interplanetary medium between Earth and Neptune. The two spacecraft have the potential to continue returning science data until around the year 2020. With this extended operating lifetime, there is a high likelihood of one of the two spacecraft penetrating the termination shock and possibly the heliopause boundary, and entering interstellar space before that time. This paper describes the Voyager Interstellar Mission--the mission objectives, the spacecraft and science payload, the mission operations system used to support operations, and the mission operations strategy being used to maximize science data return even in the event of certain potential spacecraft subsystem failures. The implementation of automated analysis tools to offset and enable reduced flight team staffing levels is also discussed.     

Cassini Saturn-escape trajectories to Jupiter,Uranus, and Neptune

Potential encore-mission scenarios have been considered for the Cassini mission. In this paper we discuss one of the end-of-life scenarios in which the Cassini spacecraft could perform a Saturn escape via gravity assists from Titan. It is shown that such satellite-aided escape requires a small deterministic maneuver (e.g., Δv<50 m/s), but provides enough energy for the Cassini spacecraft to reach a range of targets in our Solar System, as close to the Sun as the asteroid belt or as far as the Kuiper belt. The escape sequence could be initiated from an arbitrary point during the on-going Cassini mission. Example tours are presented in which the final Titan flyby places the spacecraft into ballistic trajectories that reach Jupiter, Uranus, and Neptune. After years of heliocentric flight, the spacecraft could impact on the target gas giant or perform a flyby to escape from the Solar System (if not to another destination). The concept can be generalized to a new kind of missions, including nested-grand tours, which may involve satellite-aided captures and escapes at more than one planet.     

全太阳系深空探测轨迹全局优化(英文)

针对太阳系中全部的248997颗行星的探测问题,给出了一种关于探测飞行器的深空探测全局四维轨迹(t,x,y,z)优化方案,即飞行器从地球发射进入太阳系并采用小推力控制,优化方案的性能指标为飞行器与太阳系中全部行星中相遇和交会的星的数量最多并且燃料消耗最少。本方案给出了四维飞行轨迹进行全局优化的一套算法,该算法由搜索算法和四维轨迹优化算法组成。此搜索算法从太阳系的248997颗行星中寻找获得尽可能多的经过近地球3维走廊内的行星;而四维轨迹优化算法由改进的动态规划算法、基于最优控制理论的共轭梯度算法和静态参数优化算法组成,其中静态参数优化算法用于搜索最优发射时间窗口。基于该组合算法,通过长时间的大规模的飞行数字仿真,最终计算出探测器的四维最优飞行轨迹,在一年内路过了太阳系中全部行星中的12颗行星。     

Novel orbits of Mercury,Venus and Mars enabled using low-thrust propulsion

Exploration of the inner planets of the Solar System is vital to significantly enhance the understanding of the formulation of the Earth and other planets. This paper therefore considers the development of novel orbits of Mars, Mercury and Venus to enhance the opportunities for remote sensing of these planets. Continuous acceleration is used to extend the critical inclination of highly elliptical orbits at each planet and is shown to require modest thrust magnitudes. This paper also presents the extension of existing sun-synchronous orbits around Mars. However, unlike Earth and Mars, natural sun-synchronous orbits do not exist at Mercury or Venus. This research therefore also uses continuous acceleration to enable circular and elliptical sun-synchronous orbits, by ensuring that the orbit's nodal precession rate matches the planets mean orbital rate around the Sun, such that the lighting along the ground-track remains approximately constant over the mission duration. This property is useful both in terms of spacecraft design, due to the constant thermal conditions, and for comparison of images. Considerably high thrust levels are however required to enable these orbits, which are prohibitively high for orbits with inclinations around 90°. These orbits therefore require some development in electric propulsion systems before becoming feasible.     

美国小行星俘获任务及其启示

小行星俘获(ACR)任务是美国Keck空间研究中心发起的一项深空探测任务。该任务计划选定一颗近地小行星,通过口袋式抓捕系统对其实施抓捕,并于2025年左右将其带回近月空间。文章介绍了ACR任务的内容和系统设计,具体包括:航天器总体构型、抓捕分系统、探测识别分系统和控制与推进分系统;对小行星抓捕的目标探测与识别、旋转匹配、抓捕、消旋、轨道转移等核心操作。基于ACR任务,提出了空间目标俘获技术的需求与应用、抓捕航天器系统设计的启示;基于我国目前的技术研究情况,总结分析了发展空间目标俘获任务所需的关键技术,如大功率柔性太阳翼、长时间大范围轨道机动、目标探测与识别、快速机动、目标抓捕与消旋。