The pharao project: Towards a space clock using cold cs atoms

For several years, the “BNM-Laboratoire Primaire du Temps et des Fréquences” has worked on a cold atom frequency standard. With a cesium atomic fountain a resonance line width of 700 mHz has been obtained leading to a short-term stability of 2 × 10⁻¹³ τ^−1/2 down to 2 × 10⁻¹⁵ at 10⁴ s. A first evaluation of the fountain accuracy has been performed resulting in an accuracy of 3 × 10⁻¹⁵, three times better than previously achieved with thermal beams frequency standards. In the atomic fountain, gravity limits the interaction time to ˜1 s, hence the resonance line width to ˜0.5 Hz. A factor of 10 reduction in the line width could be obtained in a micro-gravity environment. The “Centre National d'Etudes Spatiales” (the French space agency), the “BNM-Laboratoire Primaire du Temps et des Fréquences”, the “Laboratoire de l'Horloge Atomique” and the “Laboratoire Kastler Brossel” have set up a collaboration to investigate a space frequency standard using cold atoms: the PHARAO project. A microgravity prototype has been constructed and operated first in the reduced gravity of aircraft parabolic flights in May 1997. It is designed as a transportable frequency standard. The PHARAO frequency standard could be a key element in future space missions in fundamental physics such as SORT (solar orbit relativity test), detection of gravitational waves, or for the realization of a global time scale and a new generation of positioning system.     

The feasibility of Doppler monitoring during EVA

During extravehicular activities (EVA) outside the spacecraft, astronauts have to work under reduced pressure in a space suit. This pressure reduction induces the risk of decompression sickness (DCS) by the formation of gas bubbles from excess nitrogen dissolved in the organism by breathing air at normal pressure. Under laboratory conditions the gas bubbles moving in the blood stream can be detected by the non-invasive ultrasonic Doppler method. By early detection of excessive bubble formation the development of DCS symptoms may be prevented by early application of preventative measures. The method could also be useful when applied in the space suit in order to compare the results of laboratory tests with operational results, because there is a discrepancy according to the DCS risk of laboratory experiments and actual EVA missions, where no symptoms have been reported yet. A prototype Doppler sensor has been developed and implemented in the Russian Orlan suit. To investigate the feasibility of this method under simulated space conditions, the equipment has been used in a series of 12 thermovacuum chamber tests with suited subjects, where intravenous bubble formation was compared to unsuited control experiments. In more than 50% of the suited tests good Doppler recordings could be achieved. In some cases with unsatisfying results the signal could be improved by breathholding. Although the results do not yet allow any conclusion about a possible difference between suited and unsuited subjects due to the small number of tests performed, the method proved its feasibility for use in EVA suits and should be further developed to enhance the safety of EVA procedures.     

Bubble detector characterization for space radiation

In light of the importance of the neutron contribution to the dose equivalent received by space workers in the near-Earth radiation environment, there is an increasing need for a personal dosimeter that is passive in nature and able to respond to this neutron field in real time. Recent Canadian technology has led to the development of a bubble detector, which is sensitive to neutrons, but insensitive to low linear energy transfer (LET) radiation. By changing the composition of the bubble detector fluid (or “superheat”), the detectors can be fabricated to respond to different types of radiation. This paper describes a preliminary ground-based research effort to better characterize the bubble detectors of different compositions at various charged-particle accelerator facilities, which are capable of simulating the space radiation field.     

ESA's Biopan 1--"Vitamin" experiment preliminary results

The purpose of “Vitamin” experiment is to study the efficiency of protective substances on three biological acellular systems aqueous solutions exposed to cosmic radiation in space. The first system “LDL”is a low density lipoprotein. The second is “E2-TeBG complexe” in which estradiol (E2) is bound to its plasmatic carrier protein, testosterone-estradiol binding globulin (TeBG). The third is “pBR 322”, a plasmid. “Vitamin” experiment was accomodated in the Biopan which had been mounted on the outer surface of a Foton retrievable satellite. The experiment was exposed to space environment during 15 days. A stable temperature of about 20 °C was maintained throughout the flight. “Vitamin” experiment preliminary results are presented and discussed.     

Application of the mechanical oscillator technique to the investigation of EVA decompression

The ultrasonic bubble detection technique has been used as a versatile tool in the investigation of hypobaric decompression procedures for the last two decades. However, this method can only detect relatively large bubbles > 30-50 micrometers (usually in venous blood) and not the very first stages of bubble formation. Recently, the mechanical oscillator technique has been applied in air diving trials in order to detect small blood density changes due to hypothetical fluid shifts. However, sharp density drops were found in the decompression process, and these have been attributed to gas bubble formation. In this study, this method was applied together with Doppler controls to a series of altitude decompressions to 300 and 500 hPa, which represents the range of EVA operational pressures currently used or planned. Six subjects participated in both series; the oscillator sample tube could be pressurized. By the application of pressure on a blood sample containing questionable gas bubbles, these are reduced in volume, like in recompression therapy, and thus the density of the sample is increased. This effect has been shown in all 6 subjects undergoing decompression to 300 hPa, whereas in the 500 hPa series only 3 out of 6 subjects corresponded with gas phase formation immediately after decompression. Typically, Doppler bubbles appeared only after some latency time between 20 and 60 min; after this time, the density effect had nearly vanished. It is concluded that the mechanical oscillator technique represents a complementary research instrument to the Doppler method, because it is able to deliver a quantitative resolution of the early stage of gas phase formation.     

The hidden costs of reliability and failure in launch systems

In comparing the costs of different launch vehicles, the possibility of the risk of failure is assumed to be accounted for by the cost of insurance. The satellite may be insured against loss during launch, and the launch services provider may offer a “free relaunch.” However, actual costs of reliability and failure extend beyond this. Each failure necessitates an investigation and a “get well” programme by the operating agency, while putting the operations team “on hold” until services can resume. A commercial operator may also lose customer revenue and actual customers through loss of confidence or unavailability. Such costs tend to be hidden, and not evaluated in assessing the effectiveness of a system, but count towards total costs. Failure investigations help to improve system reliability, but this could equally have been achieved by expenditure in development and qualification. Reusable launch vehicles will have different costs associated with reliability and failure. The relationship between reliability and cost, properly assessed, ought to influence the design of both expendable and reusable launch systems.     

New results for the space radiation environment of MIR space station obtained by Liulin dosimeter-radiometer. Comparison with LET spectrometer NAUSICAA

Since 1988 high sensitivity semiconductor dosimeter-radiometer “Liulin” worked on board of MIR space station. Device measured the absorbed dose rate and the flux of penetrating particles. The analysis of the data hows the following new results:

In October 1989 and after March 24, 1991, two additional stable maximums in flux channel were observed in the southern-eastern part of South Atlantic Anomaly (SAA). These two maximums existed at least several months and seem to be due to trapped high energy electron and proton fluxes. In April 1991 additional maximums were localized in the following geographical coordinates regions: LATITUDE = (−35 °)–(−50 °) LONGITUDE = 332 ° − 16 ° and lat.(−46 °)–(−52 °) long. 360 ° − 60 °. Additional maximums diffusion occurs inside radiation belt. Appearance of these maximums seems to be closely connected with preceding powerful solar proton events and associated geomagnetic dynamics of new belt disturbances. After the series of solar proton events in June 1991 we observed significant enhancement of this new radiation belt formation. To achieve sufficient accuracy of dose rate predictions in low Earth orbits the structure and dynamics of new belt should be carefully analyzed to be included in a new environment model.

From the inter comparison of the data from “Liulin” and French developed tissue equivalent LET spectrometer NAUSICAA in the time period August–November 1992 we come to the following conclusions: Mainly there is good agreement between both data sets for absorbed dose in the region of SAA; Different situation of the instruments on the station can explain the cases when differences up to 2 times are observed; At high latitudes usually the tissue equivalent absorbed dose observations are 2 times larger than “Liulin” doses.     

Efficacy of Doppler ultrasound [correction of utrasound] for screening symptoms of decompression sickness during simulated extravehicular activities

Doppler ultrasound is frequently used for monitoring circulating microbubbles during decompression to assess the symptoms of Decompression Sickness (DCS). This analysis was carried out to evaluate its effectiveness for screening symptoms of DCS during simulated extravehicular activities (EVA). The information from various hypobaric chamber studies carried out at the NASA Johnson Space Center, Houston, TX was used in this analysis (n = 516). The circulating microbubbles were detected in the precordial area in 42% (218/516), and symptoms were reported in 16% (81/516) of these exposures. The accuracy of Doppler-detectable bubbles (Spencer grades) on all symptoms of DCS was examined by calculating measures of sensitivity and specificity. The efficacy of Doppler as a screening device was examined by calculating their positive predictive value (PPV) and negative predictive value (NPV). The results of these analyses indicated that the sensitivity of Doppler decreased, and the PPV increased with higher Spencer grades. However, the likelihood of detecting true negative cases (NPV) was consistently higher with all bubble grades. Due to the high false-positive rate and low prior probabilities of the risk of DCS, Doppler was found to be more useful to identify those who did not develop DCS, than to detect positive cases of DCS in the simulated EVA exposures.     

Countermeasure of the negative effects of weightlessness on physical systems in long-term space flights

The system of countermcasure of microgravity effects has been developed in Russia that allowed to perform safely long-term space flights. This system that includes different means and methods such as special regimens of physical exercises, axial loading (“Pingiun”) and antigravity suits, low body negative pressure device (LBNP, “Chibis”) and “cuffs” and others has been used with certain variations at certain stages of flight in 27 successfully accomplished space flights that lasted from 60 to 439 days. The pre-, in- and postflight studies performed in 57 crew members of these flights have shown that the system of countermeasure is effective in preventing or diminishing to a great extent almost all the negative effects of weightlessness in flights of a year and more duration and that the intensity and duration of changes recorded in different body systems after flights do not correlate significantly to flight durations, correlating strongly to the volume and intensity of physical exercises used during flight and especially during concluding stage of it.     

Opportunities from space

This article reports on two of the main sessions at the “Space: Technology and Opportunity” conference, Geneva, May 1985, organized by Online Conferences Ltd, Pinner Green House, Ash Hill Drive, Pinner, Middlesex HA5 2AE, UK, from whom the proceedings are available.     

The data compression problem for the “GAIA” astrometric satellite of ESA

Space-based astrometry has a great tradition at ESA. The first space-based astrometric satellite in history, “Hipparcos”, was launched by ESA in 1989 and, in spite of orbital problems, was able to accomplish almost all of its tasks until it was finally shut down in 1993. The results of the Hipparcos mission were published by ESA in 1997 in the form of six CD-ROMs: the Hipparcos Catalogue contains 118,218 entries with median astrometric precision of around 1 milliarcsec, and specific results for double and multiple systems. In practice, Hipparcos drew for the first time the three-dimensional “map” of the spherical region of the Galaxy surrounding the Sun and having a radius of roughly 1,000 light years.

Then, in 1995, ESA launched the study of a new astrometric satellite, named “GAIA” and about a hundred times more powerful than Hipparcos, i.e. with median astrometric precision of around 10 microarcsec. This new satellite is intended to measure the parallaxes of over 50 million stars in the Galaxy, at least for the brightest stars, and this would mean to “draw” the three-dimensional map of the whole Galaxy, reaching out even to the Magellanic Clouds, 180,000 light years away.

The team of European scientists and engineers now designing GAIA, however, is facing hard technological difficulties. One of these is the design and coding of radically new and ultra-powerful mathematical algorithms for the on-board compression of the 50-million-stars data that GAIA will send to Earth from its intended geostationary orbit. Preliminary estimates of the raw data rates from the GAIA focal plane, in fact, are of the order of a few Gigabits per second. To reduce the data stream to the envisaged telemetry link of 1 Megabit per second, on-board data compression with a 1 to 1,000 ratio is the target. Clearly, this is far beyond the capabilities of any lossless compression technique (enabling compression ratios of 1 to some tens), and so some “wise” lossy compression mathematical procedure must be adopted.

In this paper a GAIA-adapted lossy data compression technique is presented, based on the Karhunen-Loève Transform (KLT). The essence of this method was already used by NASA for the Galileo mission when the large antenna got stuck and the mission was rescued by re-programming the on-board computer in terms of the KLT. That transform was officially named ICT — “Integer Cosine Transform” — by the NASA-JPL team led by Dr. Kahr-Ming Cheung. But the KLT here described for GAIA will of course differ from the JPL one in many regards, owing to the advances in computer technology.

Finally, estimates are also given about the possibility of using the KLT for onboard data compression in case GAIA is going to be put into orbit around the Lagrangian point L2 of the Earth-Sun system, and, above all, in case the number of stars to be observed is actually raised from 50 millions to one billion, as ESA currently appears to be likely to pursue.     

Small spacecraft “UNISAT” launched by the “start-1” launcher

The preliminary estimations show that the contemporary level of electronic and information engineering makes it possible to create a small s/c of 150–200 kg mass capable to solve both the problems of Earth remote sensing and many other applied and scientific problems orbiting the planets at 500–1000 km. In accordance with the fundamental criterion for choosing parameters of small multipurpose spacecraft the small UNISAT s/c has been created on the basis of a unified space platform. The design provides for s/c energetic, thermal and space-saving parameters satisfying the conditions for accommodation of various-purpose payload and a possibility of using relatively inexpensive and light launchers like “Start-1” mobile launch complexes. Space platform mass is 100–120 kg; permissible payloads (PL) mass is 40–80 kg; maximal average power consumption of the payload is up to 60 W; three-axes orientation accuracy up to 0.001 deg./s; s/c lifetime is not less than 3–5 years.     

Bistatic radar as a tool for earth investigation using small satellites

Bistatic radar is a facility for the Earth remote sensing, which uses large spatial diversity between its transmitter and receiver. Nomogram method is proposed to determine the radar's parameters. Analysis of the nomograms has shown that modern onboard radio facilities allow to obtain spatial resolution of about 100 m at the wavelength λ = 3 cm for LEO satellite (H = 350 km). Experiments of bistatic radiolocation of the Earth near the radioshadow zone were provided using telecommunication link “MIR” orbital station — GEO satellite at wavelength λ = 32 cm. For the first time in practice of bistatic radiolocation of the Earth from space reflected signal in radioshadow zone was observed.The analysis of experimental results verified the developed radiophysical model with the value of sea water conductivity σ = 7.0 mo/m and absorption coefficient due to atmospheric oxygen χ = 0.0096±0.0024 dB/km.     

Electrophotometrical studies of equatorial and tropical arcs on board the Salyut-6 orbital station

The results from the electrophotometric investigation of the equatorial and tropical ionospheric arcs on board the orbital station “Salyut-6”, carried out with Bulgarian photometer “Duga”, intended for measurements of the self-radiation of the Earth's upper atmosphere in the lines λ = 6300 Å, λ = 5577 Å, λ = 4278 Å and λ = 6563 Å, are analyzed. From the obtained results of the intensity of the measured emissions is established by calculation that the cause of these arcs is the plasma drift downwards, which leads to intensification of the dissociative recombination of the ions O₂⁺ and of the radiative recombination of O⁺.     

Potential evolution of an international moon base programme

The Moon is a major target in expanding human activity in Space. President Bush has called for a Space Exploration Initiative. European participation may depend on achieving an affordable programme and identifying distinct elements for non-U.S. participation. Affordability requires that all participants can influence the “cost to user” of Base operations. If lunar activity is to evolve towards resource exploitation, there will need to be a progressive reduction in operating costs. European interest would prefer participation that allowed longer-term independent interests. The paper addresses how non-U.S. agencies could contribute valuable elements to an International Moon Base while meeting three criteria:

• — Keep a core infrastructure under U.S. control.

• — Avoid a total reliance by the partner on U.S. services.

• — Allow the partner to evolve towards an eventual, semi-autonomous or autonomous capability.

The paper illustrates possible implications of meeting these constraints through “mini infrastructures” combining several elements to form a working architecture. It is concluded that any European participation in an International Moon Base Programme should contain both Space transport and surface elements.     

German rockets in africa: The explosive heritage of peenemunde

This historical paper reviews the technical development and the political impact of two “intelligence affairs” with German rocketry in African countries: 1. the Nasser missiles and space projects in Egypt during the 1960s; 2. the private OTRAG venture in Zaire and Libya during the 1970s.     

The earth explorer candidates: Nine focused missions, all satellite classes

The size of a satellite should follow naturally from the mission requirements taking into account implementation constraints, notably the choice of launcher and programmatics. The key concepts are “focused mission” and “maximum return for the investment”. The nine candidates proposed for the ESA Earth Explorer programme of research missions form a good representative set to illustrate a discussion of satellite classes. These focused missions lead to satellites from less than 100 kg and 100 W, to more than 2000 kg and 2 kW of power generation and include flights of opportunity and precursor experiments.     

Studies of radio frequency interference at Parkes Observatory

During 16 weeks of continuous SETI observing at the Parkes Observatory in New South Wales, Australia, a set of time-averaged data with 643 Hz resolution were recorded and returned to the SETI Institute for post-processing. These data are the 14 second (10 frame) average powers in each of 15,552 “subband” channels covering 10 MHz of the spectrum in both right and left circular polarizations that were used by the signal detection hardware to baseline and threshold the 1 Hz high resolution SETI spectra. The observations covered frequencies from 1.2 to 3 GHz, tracking 209 stellar targets across the sky. The data at each frequency were averaged over all directions and then interrogated to attempt to determine the prevalence of radio frequency interference (RFI). Estimates were made for the probability of encountering RFI at a particular frequency. Particular attention has been paid to those portions of the spectrum that are allocated as primary use status, or footnote protection for radioastronomy. This sixteen-week snapshot of the RFI situation at Parkes is by now out of date. Unfortunately, a year later, the situation has undoubtedly worsened.     

Innovations for competitiveness: European views on “better-faster-cheaper”

The paper elaborates on “ lessons learned” from two recent ESA workshops, one focussing on the role of Innovation in the competitiveness of the space sector and the second on technology and engineering aspects conducive to better, faster and cheaper space programmes. The paper focuses primarily on four major aspects, namely:

1. a) the adaptations of industrial and public organisations to the global market needs;

2. b) the understanding of the bottleneck factors limiting competitiveness;

3. c) the trends toward new system architectures and new engineering and production methods;

4. d) the understanding of the role of new technology in the future applications.

Under the pressure of market forces and the influence of many global and regional players, applications of space systems and technology are becoming more and more competitive. It is well recognised that without major effort for innovation in industrial practices, organisations, R&D, marketing and financial approaches the European space sector will stagnate and loose its competence as well as its competitiveness. It is also recognised that a programme run according to the “better, faster, cheaper” philosophy relies on much closer integration of system design, development and verification, and draws heavily on a robust and comprehensive programme of technology development, which must run in parallel and off-line with respect to flight programmes.

A company's innovation capabilities will determine its future competitive advantage (in time, cost, performance or value) and overall growth potential. Innovation must be a process that can be counted on to provide repetitive, sustainable, long-term performance improvements. As such, it needs not depend on great breakthroughs in technology and concepts (which are accidental and rare). Rather, it could be based on bold evolution through the establishment of know-how, application of best practices, process effectiveness and high standards, performance measurement, and attention to customers and professional marketing. Having a technological lead allows industry to gain a competitive advantage in performance, cost and opportunities. Instrumental to better competitiveness is an R&D effort based on the adaptation of high technology products, capable of capturing new users, increasing production, decreasing the cost and delivery time and integrating high level of intelligence, information and autonomy. New systems will have to take in to account from the start what types of technologies are being developed or are already available in other areas outside space, and design their system accordingly. The future challenge for “faster, better, cheaper” appears to concern primarily “cost-effective”, performant autonomous spacecraft, “cost-effective”, reliable launching means and intelligent data fusion technologies and robust software serving mass- market real time services, distributed via EHF bands and Internet.

In conclusion, it can be noticed that in the past few years new approaches have considerably enlarged the ways in which space missions can be implemented. They are supported by true innovations in mission concepts, system architecture, development and technologies, in particular for the development of initiatives based on multi-mission mini-satellites platforms for communication and Earth observation missions. There are also definite limits to cost cutting (such as lowering heads counts and increasing efficiency), and therefore the strategic perspective must be shifted from the present emphasis on cost-driven enhancement to revenue-driven improvements for growth. And since the product life-cycle is continuously shortening, competitiveness is linked very strongly with the capability to generate new technology products which enhance cost/benefit performance.