共查询到20条相似文献,搜索用时 62 毫秒
1.
以制造执行系统(MES)框架模型和思想理念为指导,结合航天产品制造车间管理现状,利用信息工程方法论和信息资源规划工具建立航天产品制造车间MES应用模型,在此模型的基础上进行车间管理信息系统的开发应用,可以提高车间管理信息化水平。 相似文献
2.
为了提高航天发动机数字化研制能力,对航天发动机数字化制造的理论进行了研究,包括数字化制造的环节、各环节所使用的数字化工具以及这些工具间的相互关系。重点研究并阐述了三维工艺与MES(Manufacturing Executive System,制造执行系统)在数字化制造中的应用。 相似文献
3.
随着计算机技术、计算机辅助设计/计算机辅助制造(CAD/CAM)技术、数控技术的不断发展,航天型号产品制造技术也面临着如何应用这些高、新技术进行技术改造,提高航天产品制造技术和工艺管理水平的问题。在“七五”计划期间,以飞航导弹制造技术改造为目的,开展了飞航导弹CAM技术研究。该项研究已成为航天系统CAM技术应用示范工程。CAD/CAM一体化技术应用于飞航导弹制造的关键环节上,改变了传统的制造方法;建立了飞航导弹CAM车间单元系统,完成了多项关键零件的加工,取得了一批科研成果。1991年10 相似文献
4.
5.
6.
7.
介绍了一个航天企业的车间管理系统的设计与实现。该系统可对车间人事、质量、工时、考勤、加班、图纸和技术文件(技术通知单、工艺通知单)等进行系统的、全面的计算机管理,提供相应的报表、查询和统计分析。 相似文献
8.
面向虚拟制造的车间集成规划技术研究 总被引:3,自引:0,他引:3
基于虚拟制造技术,提出了面向车间设计规划的虚拟制造系统体系结构,对其中涉及的车间模型进行了详细分析建模,并最终建立了车间集成设计规划系统。研究表明,该系统可以通过虚拟环境使车间设计规划更加直观,并可有效地协调车间从设计到实际运行各个阶段的关系,在实施方案前就达到系统最优化的目的。此外,该系统也为 RMS 的重组规划提供了技术支持。 相似文献
9.
10.
11.
介绍了一种新的刚体转动的四元数模型。这些模型可以提高再定向控制的对边界条件的适应能力,在此基础上还介绍了这些模型的一些实际应用。 相似文献
12.
A. A. Davydov 《Cosmic Research》2011,49(4):335-344
A communication satellite (small spacecraft) injected into a geosynchronous orbit is considered. Flywheel engines are used
to control the rotational spacecraft motion. The spacecraft after the emergency situation has passed into a state of uncontrolled
rotation. In this case, no direct telemetric information about parameters of its rotational motion was accessible. As a result,
the problem arose to determine the rotational satellite motion according to the available indirect information: current taken
from the solar panels. Telemetric measurements of solar panel current obtained on the time interval of a few hours were simultaneously
processed by the least squares method integrating the equations of rotational satellite motion. We present the results of
processing 10 intervals of the measurement data allowing one to determine the real rotational spacecraft motion and to estimate
the total angular momentum of flywheel engines. 相似文献
13.
14.
为满足航天器微振动环境模拟的需要,开展了多自由度微振动时域波形复现控制方法研究。首先,介绍了基于时域波形复现的多自由度微振动环境模拟控制理论方法。其次,针对六自由度微振动激励系统,应用MATLAB软件建立了基于实测传递函数矩阵的多输入多输出微振动激励仿真系统,针对微振动时域波形复现闭环控制过程进行了算法编程,并给出了仿真的闭环控制流程图。最后,通过算例对多自由度微振动时域波形复现进行了数值仿真,以给定的白噪声为输入,模拟对实际存在的系统非线性、测量误差等影响因素的控制效果。仿真结果验证了多自由度微振动时域波形复现控制方法的可行性及有效性,所得结论可以为研究多自由度微振动时域波形复现控制系统提供参考。 相似文献
15.
The problem of optimal control over many-revolution spacecraft orbit transfers between circular coplanar orbits of satellites is considered. The spacecraft flight is controlled by a thrust vector of a jet engine with restricted thrust (JERT). The mass expenditure is minimized at a limited time of flight. The optimal control problem is solved based on the maximum principle. The boundary value problem of the maximum principle is solved numerically using the shooting method. A modified computation scheme of the shooting method is suggested (multi-point shooting), as well as a method (correlated with the scheme) of choosing the initial approximation with the use of a solution to the optimization problem in the impulse formulation. The scheme and method allow one to construct many-revolution spacecraft orbit transfers. 相似文献
16.
热变形对天线指向机构的指向精度具有重要影响,但利用传统的设计方法很难实现对指向精度的准确计算,尤其是热变形对指向精度影响的研究工作更是少见。为此建立了机构的三维实体热-结构耦合有限元分析模型,根据有限元分析结果并结合机构的运动链关系,构建了各关键运动副运动误差的计算方法;在此基础上实现了机构指向误差的计算,研究了运动副名义、最大以及最小配合间隙条件下,温度载荷对各关键运动副运动误差和指向精度的影响。研究结果表明,温度载荷对关键运动副的运动误差以及机构的指向精度具有重要影响,随着温度载荷偏离常温数值的增加,指向误差不断增大,名义配合间隙条件下的指向误差最大。 相似文献
17.
18.
The problem of determining an estimation of current spacecraft motion parameters on the stage of its descent is solved on the basis of readings of an optoelectronic navigation system and additional information from the self-contained inertial navigation system at the most general assumptions on the nature of motion of the object and the statistical properties of the noise of the measuring devices. 相似文献
19.
10月14日,国际空间大学董事会主席拉姆·哈迪姆访问中国航天科技集团公司,就集团公司承办国际空间大学2007年暑期进修项目的筹备情况与集团公司人力资源部部长陈学钏、副部长白燕强交换了意见。陈学钏部长向哈迪姆通报了集团公司筹备这次活动的工作进展情况。据陈部长介绍,中国 相似文献