Measurements of L-band inland-water surface-clutter Doppler spectra

Although radar surface-clutter reflectivities from terrain are generally much greater than those from water, strong Bragg resonances at low but non-zero Doppler frequencies in backscatter from small inland bodies of water might potentially cause false alarms for moving target indicator (MTI) or other Doppler signal-processing techniques designed for target detection in ground clutter. To provide data for investigating this concern, measurements of L-band radar backscatter were recorded from the surface of a small inland freshwater reservoir in central Massachusetts. These measurements were of unusually high system stability and spectral purity so as to provide up to 80 dB of available spectral dynamic range. Strong Bragg spikes occurred in the clutter Doppler spectra from the reservoir at low (3 to 4 Hz) but non-zero Doppler frequencies. This strong Bragg resonance was persistent in time and space throughout the measurements. Spectral results are presented for all four combinations of linear polarization. Comparison with tree clutter spectral results indicates that, when an occasional water body comes under surveillance at vertical polarization in otherwise generally forested terrain, water clutter spectral density is expected to exceed surrounding-terrain tree clutter spectral densities in the Bragg-offset Doppler vicinity by large amounts     

Validation of windblown radar ground clutter spectral shape

We investigate the robustness of the linear matched filter (MF) operating in a Gaussian environment in the presence of a mismatch between the design clutter-power spectral density (PSD) shape and the actual one. The Gaussian, the power-law (PL), and the double-exponential spectral models have been considered with the goal of investigating which one fits best for windblown foliage. We analyze the MF performance in terms of improvement factor, probability of false alarm, and probability of detection by making use of the theoretical models and measured X-band ground clutter data. The numerical results validate the double-exponential spectral model for windblown foliage by showing that the differences in performance prediction between using measured clutter data and modeled clutter data of various spectral shapes (viz., Gaussian, FL, and double-exponential) are minimized when the spectral model employed is of double-exponential shape     

Spectral Analysis and Subtraction of Noise in Radar Signals

A new method of maximum entropy spectral estimation called the revised maximum entropy method (MEM) is formulated and is applied to the spectral analysis of the echo signals from atmospheric turbulence observed by an incoherent scatter radar. The revised MEM is shown free from many demerits of the other methods for spectral analysis. Further it makes it possible to subtract the white noise usually contained in the data during the processing. Some examples of spectral estimation are shown for the actual radar signals and the simulated data. Another application of the revised MEM is the subtraction of the clutter component which is difficult to do by linear filtering. The method is successfully applied to several data abounding with the clutter to obtain the spectra of the echo signals with less clutter distortion.     

The Effect of Spectral Shape on Clutter Standard Deviation

Many radar systems now employ wideband waveforms and noncoherent averaging techniques to reduce the scintillation of the backscatter from ground clutter. The purpose of this paper is to quantify the effects of the wideband spectral shape on the clutter standard deviation after noncoherent averaging of the received signal. Relationships are developed which quantify the clutter standard deviation for any spectral shape and any ratio of transmitted band-width to processed bandwidth.     

Analysis of array errors and a short-time processor in airbornephased array radars

Array errors are inherent in a realistic phased array radar system. The influence of array errors on the clutter degrees of freedom and the clutter subspace in an airborne phased array radar is analyzed. Based on the presented theoretic results, a method of short-time processing followed by coherent integration is proposed for clutter suppression in airborne phased array radars. It can approximate the two-dimensional optimal processor well even in the presence of array errors, clutter fluctuations and aircraft drift, with a considerable saving in computations     

The Effect of Staggered PRF's on MTI Signal Detection

Long-range surveillance radars use MTI techniques to detect moving targets in a clutter background. The transmitter PRF is usually staggered to eliminate the blind speeds due to aliasing of the target and clutter spectra. A spectral analysis of the target and clutter signals is performed for the case of nonuniform sampling, and it is shown that the clutter spectral density continues to fold over at the basic PRF, but the signal spectrum becomes dispersed in frequency, which means that an MTI rader will never be completely blind to moving targets.     

Clutter rejection and transmitter-receiver requirements in anairborne radar

Ground clutter rejection requirements imposed on the exciter transmitter-receiver units of multirole airborne radar are examined. Methods are given to determine the characteristics of the units, such as noise, spurious spectral lines level, and analog-to-digital converter (ADC) dynamics, in both high- and medium-pulse-repetition-frequency modes of operation. It is shown that the spectral noise does not depend on either the wave form or the Doppler bandwidth. The reference oscillator spectral noise must be about -155 dB_c/Hz. The level of spurious lines generally depends only on the duty cycle, and the requirement is -80 dB_c for each line. ADC requires 12 to 14 b. The high-frequency mode is the most promising for detecting targets with very low radar cross sections in head-on configuration (free clutter domain)     

基于海杂波对消技术的无线电引信超低空技术研究

无线电引信超低空性能实现的关键就是抑制海杂波,提取出目标信号.目前常用的距离波门截止技术和频谱识别技术所能达到的超低空性能还分别有其不足之处.文中针对以上两种技术的缺点,从海杂波对消的角度出发,提出了一种简单而有效的海杂波抑制方法.     

基于稀疏贝叶斯学习的字典失配杂波空时谱估计方法

杂波谱稀疏恢复空时自适应处理（STAP）是一种有效减少杂波样本数需求的机载雷达杂波抑制方法。然而,空时平面被离散地划分为若干个网格点来构建空时导向矢量字典,当字典在失配时,杂波脊不能准确落在预先离散化的网格点上,稀疏恢复STAP性能严重下降。提出了一种基于稀疏贝叶斯学习的字典失配杂波空时谱估计方法,首先利用二维泰勒级数建立空时动态字典模型,然后将字典失配误差作为待估超参数构建贝叶斯稀疏恢复模型,并利用失配误差估计值对空时导向矢量字典进行修正,最后利用修正后的空时导向矢量字典重构杂波协方差矩阵,进而计算杂波空时谱。实验证明,该方法能够有效提高字典失配情况下的杂波谱稀疏恢复精度,杂波抑制性能优于已有字典预先离散化的稀疏贝叶斯学习STAP方法。     

基于约束序贯M估计的时空域融合红外杂波抑制

针对红外弱小目标检测中的强背景杂波干扰抑制问题进行研究,提出了一种基于参数约束序贯M估计的时空域融合自适应杂波抑制算法.该算法首先在分析序列图像帧间失配的基础上建立了一种改进的时空域融合背景预测模型,结合二维离散傅里叶快速变换图像配准和双线性插值方法进行灰度值估计;然后,基于约束序贯M估计方法进行模型参数的自适应估计,...     

Spectral-domain covariance estimation with a priori knowledge

A knowledge-aided spectral-domain approach to estimating the interference covariance matrix used in space-time adaptive processing (STAP) is proposed. Prior knowledge of the range-Doppler clutter scene is used to identify geographic regions with homogeneous scattering statistics. Then, minimum-variance spectral estimation is used to arrive at a spectral-domain clutter estimate. Finally, space-time steering vectors are used to transform the spectral-domain estimate into a data-domain estimate of the clutter covariance matrix. The proposed technique is compared with ideal performance and to the fast maximum likelihood technique using simulated results. An investigation of the performance degradation that can occur due to various inaccurate knowledge assumptions is also presented     

MTI Optimization in a Multiple-Clutter Environment

A means of optimizing a moving target indicator (MTI) filter for rejecting several types of clutter, which are generated by different mechanisms such as by rain or the ground, is formulated. lt is found that the optimal performance of such a filter depends on the spectral density functions, average radar cross sections, and the relative mean Doppler frequencies of each type of clutter. lt is shown that the optimal improvement factor of such a filter is bounded by the weighted average (weighted in accordance with the radar cross sections of the clutter types) of the improvement factor for the individual clutter type. lt is also shown that the improvement factor of such a filter is a function of the relative mean Doppler frequency f0 between the clutter types. As f0 increases, the performance of the MTI system degrades. The worst improvement factor occurs when f0 is equal to half of the radar pulse-repetition frequency (PRF).     

Statistical analysis of real clutter at different range resolutions

A statistical analysis is presented of real radar clutter data collected using the McMaster I FIX radar in 1998 and stored in the Grimsby database. We first show the deviations of the amplitude statistics from the Rayleigh model and the suitability of the K- and Weibull-distribution for the first-order amplitude statistical characterization. Thus we focus on the I and Q components of the available data and study their statistical compatibility with the compound Gaussian model. Towards this goal it has been necessary devising appropriate testing procedures; in particular, with reference to the higher order statistics agreement, we have designed a validation procedure involving the clutter representation into generalized spherical coordinates. Remarkably the results have confirmed the suitability of the spherically invariant random processes (SIRPs) for the correct modeling of the radar clutter. Finally we have performed a spectral analysis highlighting the close matching between the estimated clutter spectral density and the exponential model.     

基于先验知识及其定量评估的自适应杂波抑制研究

 为了改善训练样本数受限的非均匀杂波环境中的系统检测性能,研究了基于先验知识及其定量评估的自适应杂波抑制算法。提出了使用经真实杂波信息白化后的先验杂波协方差矩阵与单位矩阵之差的谱范数,来定量评估杂波先验知识的准确程度,并给出了真实杂波协方差矩阵未知时的矩阵谱范数估计方法。结合先验知识定量评估结果,获得了具有先验知识约束时的杂波协方差矩阵最大似然估计方法。分别基于多脉冲相参雷达以及空时自适应雷达进行了杂波建模,在此基础之上分析了算法性能。仿真结果证实了该算法优于使用样本协方差矩阵及先验杂波信息形成杂波抑制权值的性能。     

MTI Improvement Factors for Weighted DFTs

The use of the discrete Fourier transform (DFT) to enhance the detection of moving targets in ground clutter is examined. The improvement factor, defined as the signal-to-clutter ratio at the DFT processor output compared with that of the input, is given as a function of normalized clutter spectral width for various weighting functions on the DFT input. The effect of quantization of the weights on the improvement factor is also examined.     

基于稀疏重建的MIMO-OTH雷达多模杂波抑制算法

针对由多模传播引起的多普勒扩展杂波(SDC)严重影响天波超视距雷达(OTHR)对慢速船舰目标的检测这一问题,在基于多输入多输出体制的新一代天波超视距(MIMO-OTH)雷达系统下,利用空域信息抑制多模SDC。传统处理方法需要目标角度先验信息,而在实际中,该信息往往很难获得。为此,提出一种新的基于稀疏重建的多模杂波抑制算法。该算法将二维的稀疏角度搜索转变为一维的角度搜索,使运算量大大降低,且估计出的收发角(DOA-DOD)自动配对,同时可获得各个传播路径下信号的时间多普勒信息,达到了理想的MIMO-OTH雷达多模杂波抑制效果。仿真结果证明了所提算法的有效性。     

LINEAR PREDICTION APPROACH IN AIRBORNE ADAPTIVE ARRAYS

ＬＩＮＥＡＲＰＲＥＤＩＣＴＩＯＮＡＰＰＲＯＡＣＨＩＮＡＩＲＢＯＲＮＥＡＤＡＰＴＩＶＥＡＲＲＡＹＳＳｕＪｉｅ；ＬｉＣｈｕｎｓｈｅｎｇ；ＺｈｏｕＹｉｎｑｉｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＥｌｅｃｔｒｏｎｉｃＥｎｇｉｎｅｅｒｉｎｇ，ＢｅｉｊｉｎｇＵｎｉｖｅｒ...     

Clutter Spectra of Low PRF AMTI Pulse-Doppler Radar

Approximate expressions are derived for the video clutter spectra in the receiver of a low pulse repetition frequency (PRF), airborne moving target indicator (AMTI), pulse-Doppler radar for both step-scanning and continuous-scanning antennas. The receiver is assumed to process the received waveform with a clutter-tracking oscillator and a window function is employed to obtain short-term spectra. Except for the broadening effects of the window function, it is shown that the clutter spectrum can be simply related to the antenna voltage-gain pattern. It is further shown, in the scanning antenna case, that the combined spectral broadening due to platform motion and antenna scanning cannot be assumed to be the result of the convolution of the separate effects unless the antenna gain pattern has a Gaussian shape. The approximate clutter expressions are illustrated by examples and are shown to agree well with the results of computer calculations.     

Incoherent radar detection in compound-Gaussian clutter

The detection of incoherent pulse trains in compound-Gaussian disturbance with known spectral density is dealt with here. Two alternative approaches are investigated, The first, assuming perfect knowledge of the signal fluctuation law and implementing the Neyman-Pearson test on the observed waveform, turns out to be not applicable to the radar problem. The second, instead, relying on the generalized likelihood ratio optimization strategy, leads to a canonical detector, whose structure is independent of the clutter amplitude probability density function. Interestingly, this detector turns out to be constant false-alarm rate in the sense that threshold setting does not require any knowledge as to the clutter distribution, Moreover, since such a processor is not implementable in real situations, we also present an FFT-based (fast Fourier transform) suboptimum structure. Finally, we give closed-form formulas for the detection performance of both receivers, showing that both of them largely outperform the square-law detector, especially in the presence of very spiky clutter     

High-precision RCS measurement of aircraft’s weak scattering source

The radar cross section(RCS) of weak scattering source on the surface of an aircraft is usually less than 40 d Bsm.How to accurately measure the RCS characteristics of weak scattering source is a technical challenge for the aircraft's RCS measurement.This paper proposes separating and extracting the two-dimensional(2D) reflectivity distribution of the weak scattering source with the microwave imaging algorithm and spectral transform so as to enhance its measurement precision.Firstly,we performed the 2D microwave imaging of the target and then used the 2D gating function to separate and extract the reflectivity distribution of the weak scattering source.Secondly,we carried out the spectral transform of the reflectivity distribution and eventually obtained the RCS of the weak scattering source through calibration.The prototype experimental results and their analysis show that the measurement method is effective.The experiments on an aircraft's low-scattering conformal antenna verify that the measurement method can eliminate the clutter on the surface of aircraft.The precision of measuring a 40 d Bsm target is 3–5 d B better than the existing RCS measurement methods.The measurement method can more accurately obtain the weak scattering source's RCS characteristics.