自由曲面侧铣刀具轮廓与轨迹同步优化方法

针对自由曲面侧铣加工中轨迹规划困难、加工精度难保证等问题，提出了一种自由曲线母线类刀具的外形轮廓设计方法。该方法在优化刀具轮廓的同时，充分考虑了加工过程中的工件精度和刀轴光顺性问题，实现了自由曲线母线类刀具的形状设计和对应侧铣加工轨迹的生成。首先，通过分别定义刀具轮廓母线和刀轴轨迹面实现对刀具形状和侧铣加工轨迹的表达，并由此计算切削行上刀具工件干涉量来评价加工误差，以刀轴轨迹面能量评价刀轴光顺性，建立了基于加工误差和刀轴光顺性的刀具轮廓与加工轨迹的同步优化模型；其次，为实现对同步优化模型的求解，给出了基于序列逼近法的求解策略，以及优化初值中刀轴轨迹面控制参数和刀具轮廓控制参数获取方法；最后，分别通过加工轨迹规划实验和刀具轮廓设计实验，验证了本文算法在在自由曲面四轴侧铣加工刀具轮廓设计与加工轨迹优化中的正确性及有效性。研究成果为提高自由曲面类零件侧铣加工精度、实现侧铣加工刀具轮廓设计及侧铣加工轨迹规划提供了一种有效的方法和手段。     

基于萤火虫算法的CFRP材料铣削刀具结构优化

为了提高CFRP零件的加工表面质量和刀具寿命,针对其铣削加工的刀具结构进行了优化。设计了刀具结构参数与CFRP材料铣削加工表面粗糙度、后刀面磨损量之间的正交试验。应用极差分析法分析了刀具结构参数对CFRP材料加工表面粗糙度、后刀面磨损量的影响规律,并应用多元线性回归法建立了刀具结构参数与表面粗糙度、后刀面磨损量之间的数学模型。基于此模型,采用FA萤火虫算法,优化了刀具的结构参数,并进行了实验验证。结果表明:在试验参数范围内,刀具结构参数对于CFRP工件铣削表面粗糙度的影响程度依次为:后角、螺旋角、前角。当刀具的后角、螺旋角和前角增大时,工件的表面粗糙度都呈减小趋势,但减小的快慢程度不同;刀具结构参数对于后刀面磨损影响程度依次为:后角、螺旋角、前角。当刀具后角增大时,后刀面磨损量迅速上升,当螺旋角增大时,后刀面磨损量减小,当刀具的前角增大时,后刀面磨损量先减小后增大。采用FA萤火虫算法优化后的刀具结构对CFRP材料进行铣削实验,实验结果值与建立的模型预测值误差较小,表面粗糙度的误差率为3%,刀具后刀面磨损量的误差率为7.6%。     

Characterization and life prediction of single-pass honing tool for fuel injection nozzle

Single-pass honing is an important machining method for finish machining of holes, which can meet the requirement for high efficiency and consistency of holes. Characterization and life prediction of single-pass honing tool are necessary to improve the machining accuracy of holes honed, especially dimension accuracy. Single-pass honing tool is a single layer abrasive tool with fixed dimension, which still remains problematic for characterization and life prediction. For fuel injection nozzles with bore diameter under 1 mm, the stiffness of the single-pass honing tool is poor. This article presents a novel analytical model that predicts life of the tool with poor stiffness. Firstly, according to the bore diameter and dimension tolerance, the single-pass honing tool is designed and manufactured. Based on the prepared single-pass honing tool, the measurement and characterization methods are established. Furthermore, the tool wear tests are carried out, and the tool contour evolution model is established to predict the tool life.     

Tool Materials Rapid Selection Based on Initial Wear

Based on a large amount of literature about tool wear research, 873 tool wear curves are taken as samples, and statistical analysis is carried out to select the most suitable tool from all the tool materials suggested by the tool manufacturers. Statistical relationships between the initial wear and uniform wear periods are obtained. The results show that there is qualitative relationship between wear rate during initial wear period (WRIWP) and wear rate in uniform wear period (WRUWP) to certain extent. On this basis, a tool material rapid selection method based on the initial wear is put forward, and suitable tool materials for machining titanium alloy are selected. The experimental results indicate that this method is effective and useful. The new tool materials rapid selection can be used to select suitable cutting tool materials quickly before carrying out systematic machinability tests with the most suitable tool materials. The technology can be applied to doing the initial selection of cutting tool materials in either the machinability research or the workshop production.     

光学自由曲面加工机床换刀误差辨识与补偿机制研究

为了达到光学自由曲面加工机床的精度要求,进行机床快刀伺服系统换刀误差的辨识与补偿。首先对机床快刀换刀误差进行理论分析,得到其对加工成形点的影响。再对快刀系统进行几何建模以及刀具轨迹建模,从而进行工件表面微观形貌预测,得到换刀误差影响规律,进而设计检测方案以及换刀误差补偿方案。通过在matlab中进行换刀误差加工补偿建模,得到补偿后面型PV值为0.04μm,补偿效果良好。     

基于特征的蒙皮镜像铣加工残区刀轨优化方法

镜像铣加工装备及其加工工艺是蒙皮零件加工的有效手段,其特殊工艺对加工刀轨提出了等步距、无交叉、无抬刀且无残留等特殊要求。针对蒙皮零件加工特征的复杂形状,在满足等步距、无抬刀、无交叉的条件下对加工残留区域进行刀轨优化是一个难题。为解决以上难题,本文提出了一种基于特征的蒙皮镜像铣加工残区刀轨优化方法。该方法基于特征将蒙皮零件的工艺信息与几何信息相关联,自动提取加工特征的加工面及其对应的刀轨,将刀轨分割成若干段子刀轨,并构建子加工区域,再利用布尔并运算得到最终可加工区域。然后对加工面区域与最终可加工区域求布尔差识别出加工残留区域,并根据加工残区位置自适应生成满足蒙皮镜像铣特殊要求的优化刀轨。以典型复杂蒙皮零件验证本文提出的方法,结果表明,基于特征的蒙皮镜像铣加工残区刀轨优化方法可自动识别加工残区,并生成满足蒙皮镜像铣特殊要求的加工残区优化刀轨,为提高蒙皮零件数控编程效率提供技术支撑。     

复杂曲面零件五轴加工刀轴整体优化方法

 针对复杂曲面零件五轴加工中刀轴矢量变化剧烈、严重影响工件表面加工质量的问题,提出一种基于临界约束的五轴刀轴矢量整体优化方法。首先,构造了给定切触点处所有可行摆刀平面,并在摆刀平面内根据临界约束计算出临界刀轴矢量,在获得临界刀轴矢量的基础上,对其进行平面映射,建立了刀轴摆动的初始可行域;其次,通过对初始可行域进行均匀离散,根据离散点之间相对位置关系构造邻接矩阵,并结合最短路径搜索算法获得了初始参考刀轴,从而构造了新的刀轴摆动可行域;最后,建立当前切削行内无干涉且相邻刀轴变化最小的刀轴矢量优化模型,实现自由曲面五轴加工无干涉刀轴矢量的光滑控制。两种自由曲面叶轮的加工算例分析表明,采用本文方法获得的刀轴矢量可以明显改善机床的运动性能,避免了刀具干涉的产生,可提高复杂曲面零件的加工质量与效率。     

基于经线划分的非圆截面环形刀具刀位优化算法

目前环形刀具的刀位算法均未考虑圆刀片安装时存在的俯仰角和偏转角,因而在理论上存在较大的编程误差。针对实际使用刀具为非圆截面环形刀具的情况,通过对环形刀具的截面曲线进行分析,提出了一种基于经线划分的非圆截面环形刀具刀位优化算法。首先利用经线法求解出刀具表面和工件曲面之间的误差分布,然后根据此误差分布来调整刀具位置和姿态,使刀具表面与设计曲面在不发生干涉的情况下实现密切接触,从而得到刀具在指定定位点处的最优刀位。仿真结果表明,传统的五坐标刀位算法会产生较大的加工误差,而本文提出的算法消除了圆刀片安装时存在的俯仰角和偏转角所引起的加工误差,可有效提高复杂曲面的加工精度并获得满足给定编程公差的优化刀位。     

微小刀具同轴全息对刀方法研究

针对现有对刀方法存在的各种不足,提出了一种微小刀具的同轴全息对刀方法.在对全息成像原理和全息图像关键问题进行研究与分析的基础上,搭建了一套微细铣刀的全息对刀检测装置,并利用标准刀具在五轴加工中心进行了微细铣刀的对刀测量试验.试验结果表明:该对刀装置能够高效地进行微细铣刀的对刀检测,系统相对检测精度达5.1μm.在相同检...     

数控线切割三维直纹面直接刀补算法的研究

分析了四轴数控线切割机床所能加工的三维直纹面类型,以二维C型刀补为基础,根据各类型形状的特点采用了不同的刀补处理方法,分析了用二维刀补原则解决三维直纹面刀补的可行性,提出了一种不需将加工轨迹线形化的三维直纹面的直接刀补算法,指出了降低复杂直纹面刀补误差的措施。     

基于域对抗门控网络的变工况刀具磨损精确预测方法

刀具磨损的精确预测对保证零件加工质量、提高生产效率和降低制造成本具有重要作用。在实际加工过程中,切削参数、刀具几何参数、刀具材料等工况复杂多变,工况信息和刀具磨损量对监测信号的耦合作用为刀具磨损的精确预测带来了很大挑战。针对以上问题,提出了一种基于域对抗门控网络（DAGNN）的变工况刀具磨损精确预测方法。引入工况分类网络并利用无磨损量标签样本,通过域对抗和门控过滤机制自适应地从不同工况的原始监测信号中提取表征刀具磨损且对工况变化不敏感的关键信号特征。对信号特征提取网络和刀具磨损预测网络进行迭代优化,从而实现变工况刀具磨损的精确预测。实验结果表明：相比已有的方法,本文方法能够利用少量带磨损量标签的目标工况样本实现刀具材料和刀具直径变化情况下的刀具磨损量精确预测,预测精度大幅提高。     

钛合金端铣时硬质合金刀具磨损机理的研究

 在钛合金铣削加工的过程中,伴随着产生各种物理、化学现象,如变形、切削热、切削力、摩擦与磨损等。而它们之间又是相互联系、相互影响、相互作用。同时又以各自独立的物理、化学和机械现象表现出来。因此只有同时从各个方面对它们进行研究,才能深入揭示其本质。弄清其作用机理,从而去指导生产实践。     

复杂曲面宽行加工等参数线刀轨精确搭接方法

等参数线刀轨规划方法广泛应用在复杂曲面的加工中,然而,宽行加工中用传统方法计算刀轨行距不能保证准确性。为避免相邻刀轨之间出现欠切或行宽重叠过多,本文提出了一种行距的预测和调整算法。根据已有刀轨驱动线的位置预测后续刀轨驱动线的位置。构造了刀轨的有效搭接区间,选取能代表刀轨边界的几个特征刀位,通过调整刀轨驱动线的位置使其参数边界落在有效搭接区间内部。有效搭接区间为确定刀轨行距提供了依据,而特征刀位的先取大大减小了刀轨驱动线调整时的计算量。计算实例表明,本文提出的算法可以实现相邻刀轨的精确搭接。     

某环型航空零件数控加工工艺分析和自动换刀的研究

针对加工环型航空零件时均采用手工换刀加工的问题,论述了用声发射法对刀具磨损进行监测、用静态测量法对刀具轴线的偏转进行测量、粗铣试切毛坯的内轮廓实验,分析出不能实现自动换刀加工的原因.通过对零件的加工工艺进行分析,将能合并的工步源程序串在一起并在实际加工中得到验证从而实现自动换刀加工.串编程序的应用提高了工厂的生产率,降低了生产成本,也为研究加工环型航空零件的自动换刀问题奠定了坚实的基础.     

在车间环境下实现刀具耐用度模型参数的辨识

为了方便地进行刀具磨损检测,特别设计了一套便携式刀具磨损检测装置,可以方便地在不拆卸刀具的条件下实现铣刀后刀面磨损量VB的测量,很适合于车间环境实现刀具耐用度模型的辨识.本实验中进行刀具耐用度模型参数辨识的方法可以成为工厂中进行刀具磨损检测的一种实用方法.     

A novel method for solving shortest tool length based on compressing 3D check surfaces relative to tool postures

Solving the shortest tool length quickly under a known tool trajectory in multi-axis machining of complex channel parts is an urgent problem in industrial production. To solve this problem, a novel and efficient method is proposed which is featured by extracting only a few necessary curves from the check surface instead of sampling the entire surface. By rotating and compressing the 3D check surface relative to all tool postures, the boundaries of the area occupied by the 2D compressed surfaces are the essential elements for determining the shortest tool length. A tracking-based numerical algorithm is introduced to efficiently solve the silhouette curves which are formed in compressing. To define the multi-taper shaped tool holding system (THS) which is commonly used in production, a characterization model for THS profile is established. A model for solving the shortest tool length is finally constructed based on the critical interference relationship between the THS profile and all compressed boundary curves. For acceleration, the boundary splines are segmented according to their knot vectors. Then a new concept called the axis-aligned tool length box (AATB) is introduced, which can provide a conservative range of tool length for a spline segment. By scanning the AATBs of all spline segments, the very few effective spline segments that may ultimately determine the shortest tool length are filtered out. This acceleration method makes the solution for the shortest tool length more focused and efficient. The results of experimental examples are also reported to validate the efficiency and accuracy of the proposed algorithm.     

Evaluation of tool wear and cutting performance considering effects of dynamic nodes movement based on FEM simulation

An accurate estimation of tool wear morphology can provide the opportunity to investigate the influence of tool wear on cutting performance as well as reduce the overall production cost. However, tool wear prediction is still a very challenging research issue. In this paper, a novel method for simulating the actual chip formation and wear evolution thorough the 3D finite element model has been carried out. In order to improve the accuracy of simulation results, the influence of worn tool, stress and temperature distribution on wear rate are considered. Then cutting experiment has been conducted by turning AISI1045 with uncoated carbide tools to validate the accuracy of the proposed model. The comparison between experimental and simulation results show good agreement which proves the ability of the proposed model in forecasting the tool wear. The validated finite element model has been further utilized studying how the worn tool affects the cutting performance including actual cutting rake, stress distribution, cutting force and temperature. The results of this paper not only provide a clear understanding of wear evolution between tool rake face and chip, but also are meaningful to optimize tool design and cutting parameters.     

PLC控制加工中心刀库的选刀与CNC系统的通信研究

研究采用计算机记忆式的选刀方式,通过编程方法实现软件选刀功能;采用汇编语言编程实现在自动换刀过程中加工中心CNC系统与刀库控制PLC间的通信。     

Dual Drive Curve Tool Path Planning Method for 5-axis NC Machining of Sculptured Surfaces

The problem of finished surface being not first-order continuous commonly exists in machining sculptured surfaces with a torus cutter and some other types of cutters. To solve this problem, a dual drive curve tool path planning method is proposed in this article. First, the maximum machining strip width of a whole tool path can be obtained through optimizing each tool position with multi-point machining (MPM) method. Second, two drive curves are then determined according to the obtained maximum machining strip width. Finally, the tool is positioned once more along the dual drive curve under the condition of tool path smoothness. A computer simulation and cutting experiments are carried out to testify the performance of the new method. The machined surface is measured with a coordinate measuring machine (CMM) to examine the machining quality. The results obtained show that this method can effectively eliminate sharp scallops between adjacent tool paths, keep tool paths smooth, and improve the surface machining quality as well as machining efficiency.     

正交切削刀具应力的有限元分析

应用有限元方法计算了正交切削刀具的应力.对正剪切和负剪切的应力分布进行了比较,分析了负剪切易引起刀具破损的原因;对刀具前角分别为 0°、10°、15°时的等效应力进行了对比,分析了刀具前角变化对刀具强度的影响.