由高能电子引发的风云二号C星跳变事件概率分析

通过对地球同步轨道高能电子监测数据(来自GOES)与风云二号卫星跳变事件的对比分析发现, 跳变事件均发生在高能电子增强事件即所谓高能电子暴期间, 因此初步断定, 跳变事件与高能电子引起的卫星介质深层充放电事件有关. 通过对不同通量高能电子增强事件期间所发生的跳变事件发生率进行量化计算, 给出跳变事件发生概率的计算方法, 为卫星在轨运行管理及防护提供参考.      

Solar particle events observed at Mars: dosimetry measurements and model calculations

During the period from March 13, 2002 to mid-September, 2002, six solar particle events (SPE) were observed by the MARIE instrument onboard the Odyssey Spacecraft in Martian Orbit. These events were observed also by the GOES 8 satellite in Earth orbit, and thus represent the first time that the same SPE have been observed at these separate locations. The characteristics of these SPE are examined, given that the active regions of the solar disc from which the event originated can usually be identified. The dose rates at Martian orbit are calculated, both for the galactic and solar components of the ionizing particle radiation environment. The dose rates due to galactic cosmic rays (GCR) agree well with the HZETRN model calculations.     

卫星轨道保持的一类控制模型

地球赤道静止卫星希望其定点位置固定不变 ;采用轨迹重复的近地轨道的对地遥感卫星 ,需要具有固定的地面轨迹位置 ;如果这类遥感卫星还同时采用太阳同步轨道 ,则还要求降交点地方平太阳时固定不变。上述这三种情况虽然其物理机制各不相同 ,但其变化及控制过程可以抽象出一种共同的模型。文章首先给出这个统一的模型并对其进行讨论 ,然后将结果应用到所述的三种具体情况     

AIUB-CHAMP02S: The influence of GNSS model changes on gravity field recovery using spaceborne GPS

The gravity field model AIUB-CHAMP02S, which is based on six years of CHAMP GPS data, is presented here. The gravity field parameters were derived using a two step procedure: In a first step a kinematic trajectory of a low Earth orbiting (LEO) satellite is computed using the GPS data from the on-board receiver. In this step the orbits and clock corrections of the GPS satellites as well as the Earth rotation parameters (ERPs) are introduced as known. In the second step this kinematic orbit is represented by a gravitational force model and orbit parameters.     

Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

The influence of orbital maneuver on autonomous orbit determination of an extended satellite navigation constellation

The right ascension of the ascending node is unobservable if only the inter-satellite ranging is used for autonomous orbit determination (AOD) of an Earth navigation constellation. However, if an Earth-Moon libration point satellite is added to the Earth navigation constellation to construct an extended navigation constellation, all the orbital elements can be determined with only the inter-satellite ranging. Furthermore, the extended navigation constellation can provide navigation information for interplanetary probes. For such an extended navigation constellation, orbital control needs to be considered due to the instability of the libration-point satellite orbit. This study concerns the influence of satellite orbital maneuver on the AOD of the extended navigation constellation. An AOD method under orbital maneuver is proposed. A low thrust controller is designed to achieve libration point satellite autonomous orbit maintenance by using AOD results. A navigation constellation consisting of three GPS satellites and one libration point satellite are designed for simulation. The simulation results show that libration point satellites can achieve autonomous navigation and autonomous orbit maintenance by only using inter-satellite ranging information. The rotation drift error of the Earth navigation constellation is also suppressed.     

光压摄动对卫星姿态轨道耦合的影响分析

随着卫星对地测量精度要求的不断提高, 对卫星轨道的精度要求也随之提高. 目前Topex, Jason-1, Jason-2等一系列海洋测地卫星的轨道计算精度已经达到厘米量级, 相应对卫星动力学模型的要求也越来越精细. 以Topex海洋测地卫星为背景, 考虑卫星帆板有规律的运动, 将其几何形状简化为高精度轨道计算中比较通用的Boxing-Wing模型, 计算了Topex卫星的Boxing-Wing模型在轨运行中受到的太阳光压力及光压力矩. 考虑卫星姿态和轨道耦合的情况下, 计算了太阳光压力及光压力矩对Topex卫星轨道半长轴和卫星姿态的影响. 通过一个轨道周期的计算可知, 光压对卫星轨道半长轴的影响大约为9cm, 对卫星滚动角和俯仰角的影响在6°左右, 因此, 在高精度的轨道计算和姿态控制中这个影响是应该考虑的.      

A shadow function model based on perspective projection and atmospheric effect for satellites in eclipse

Accurate Solar Radiation Pressure (SRP) modelling is critical for correctly describing the dynamics of satellites. A shadow function is a unitless quantity varying between 0 and 1 to scale the solar radiation flux at a satellite’s location during eclipses. Errors in modelling shadow function lead to inaccuracy in SRP that degrades the orbit quality. Shadow function modelling requires solutions to a geometrical problem (Earth’s oblateness) and a physical problem (atmospheric effects). This study presents a new shadow function model (PPM_atm) which uses a perspective projection based approach to solve the geometrical problem rigorously and a linear function to describe the reduction of solar radiation flux due to atmospheric effects. GRACE (Gravity Recovery And Climate Experiment) satellites carry accelerometers that record variations of non-conservative forces, which reveal the variations of shadow function during eclipses. In this study, the PPM_atm is validated using accelerometer observations of the GRACE-A satellite. Test results show that the PPM_atm is closer to the variations in accelerometer observations than the widely used SECM (Spherical Earth Conical Model). Taking the accelerometer observations derived shadow function as the “truth”, the relative error in PPM_atm is ?0.79% while the SECM 11.07%. The influence of the PPM_atm is also shown in orbit prediction for Galileo satellites. Compared with the SECM, the PPM_atm can reduce the radial orbit error RMS by 5.6?cm over a 7-day prediction. The impacts of the errors in shadow function modelling on the orbit remain to be systematic and should be mitigated in long-term orbit prediction.     

The possibilities of polar meteorology,environmental remote sensing,communications and space weather applications from Artificial Lagrange Orbit

The ability to observe meteorological events in the polar regions of the Earth from satellite celebrated an anniversary, with the launch of TIROS-I in a pseudo-polar orbit on 1 April 1960. Yet, after 50 years, polar orbiting satellites are still the best view of the polar regions of the Earth. The luxuries of geostationary satellite orbit including rapid scan operations, feature tracking, and atmospheric motion vectors (or cloud drift winds), are enjoyed only by the middle and tropical latitudes or perhaps only cover the deep polar regions in the case of satellite derived winds from polar orbit. The prospect of a solar sailing satellite system in an Artificial Lagrange Orbit (ALO, also known as “pole sitters”) offers the opportunity for polar environmental remote sensing, communications, forecasting and space weather monitoring. While there are other orbital possibilities to achieve this goal, an ALO satellite system offers one of the best analogs to the geostationary satellite system for routine polar latitude observations.     

Analysis of the orbit lifetime of CubeSats in low Earth orbits including periodic variation in drag due to attitude motion

It is estimated that more than 22,300 human-made objects are in orbit around the Earth, with a total mass above 8,400,000 kg. Around 89% of these objects are non-operational and without control, which makes them to be considered orbital debris. These numbers consider only objects with dimensions larger than 10 cm. Besides those numbers, there are also about 2000 operational satellites in orbit nowadays. The space debris represents a hazard to operational satellites and to the space operations. A major concern is that this number is growing, due to new launches and particles generated by collisions. Another important point is that the development of CubeSats has increased exponentially in the last years, increasing the number of objects in space, mainly in the Low Earth Orbits (LEO). Due to the short operational time, CubeSats boost the debris population. One of the requirements for space debris mitigation in LEO is the limitation of the orbital lifetime of the satellites, which needs to be lower than 25 years. However, there are space debris with longer estimated decay time. In LEÓs, the influence of the atmospheric drag is the main orbital perturbation, and is used in maneuvers to increment the losses in the satellite orbital energy, to locate satellites in constellations and to accelerate the decay.The goal of the present research is to study the influence of aerodynamic rotational maneuver in the CubeSat?s orbital lifetime. The rotational axis is orthogonal to the orbital plane of the CubeSat, which generates variations in the ballistic coefficient along the trajectory. The maneuver is proposed to accelerate the decay and to mitigate orbital debris generated by non-operational CubeSats. The panel method is selected to determine the drag coefficient as a function of the flow incident angle and the spinning rate. The pressure distribution is integrated from the satellite faces at hypersonic rarefied flow to calculate the drag coefficient. The mathematical model considers the gravitational potential of the Earth and the deceleration due to drag. To analyze the effects of the rotation during the decay, multiple trajectories were propagated, comparing the results obtained assuming a constant drag coefficient with trajectories where the drag coefficient changes periodically. The initial perigees selected were lower than 400 km of altitude with eccentricities ranging from 0.00 to 0.02. Six values for the angular velocity were applied in the maneuver. The technique of rotating the spacecraft is an interesting solution to increase the orbit decay of a CubeSat without implementing additional de-orbit devices. Significant changes in the decay time are presented due to the increase of the mean drag coefficient calculated by the panel method, when the maneuver is applied, reducing the orbital lifetime, however the results are independent of the angular velocity of the satellite.     

Geosynchronous satellites expanding a future GNSS satellite constellation: A precise orbit determination study

The integration of geosynchronous orbit (GSO) satellites in Global Navigation Satellite Systems (GNSS) is mostly discussed to enable a regional enhancement for tracking. But how do GSO satellites affect the orbit determination of the rest of the constellation? How accurately can these orbits be determined in a future GNSS tracking scenario with optical links? In this simulation study we analyze the benefit of GSO satellites as an expansion of a MEO (Medium Earth Orbit) satellite constellation – we selected the Galileo satellite constellation – for MEO Precise Orbit Determination (POD). We address not only the impact on POD of MEO satellites but also the possibility to precisely determine the GSO satellites – geostationary orbits (GEO) and inclined geosynchronous orbits (IGSO) – in such an expanded MEO constellation. In addition to GNSS microwave observations, we analyze the influence of different optical links between the participating entities: Optical two-way Inter-Satellite Links (OISL) and ground-space oriented Optical Two-Way Links (OTWL). These optical measurements together with the GNSS microwave observations give a remarkable benefit for the POD capability. In the case of GNSS and OTWL, we simulate the measurements with regard to a network of 16 ground stations. We pay great attention to the simulation of systematic effects of all measurement techniques. We discuss the influence on the systematic errors as well as the formal orbit uncertainties. A MEO constellation expanded with GSO satellites as well as the use of optical links together with GNSS observations not only improves the MEO satellite orbits but also the GSOs to a great extent.     

基于同步轨道区磁场对相对论电子通量的预报

地球同步轨道区相对论电子通量的变化与该区域的磁场分量P(垂直轨道面指向北)有很好的相关性, 后者的变化相对于前者有1~2天的时间提前量, 这为相对论电子通量的预报提供了可能. 通过对二者相关性物理机制的研究, 结合GOES11 (135oW)卫星数据分析, 确定最佳时间提前量和最优相关系数, 并提出了一个定量的预报模型. 模型的输出参量为24 h之后的当地时子夜(23:31 LT---00:30 LT)、清晨(05:31 LT---06:30 LT)、正午(11:31 LT---12:30 LT)、傍晚(17:31 LT---18:30 LT) 4个特征时间段相对论电子通量1 h平均值, 预报的相对论电子通量有>0.6 MeV和>2 MeV两个谱段, 预报精度0.7左右. 这种预报模式对地球同步轨道卫星的自主安全运行具有较好的应用价值.      

基于单站CCD漂移扫描光电设备的同步轨道目标测定轨

地基光电观测在同步轨道目标监测领域具有重要作用.为评估单站光电设备对同步轨道目标的实际测定轨能力,利用上海天文台佘山站1.56m望远镜,采用CCD漂移扫描光电技术,对3颗北斗同步卫星开展试验观测,基于卫星精密星历评估目标的测定轨外符精度.结果表明:同步轨道目标的天文定位在方位和俯仰方向上的外符精度均好于0.3";在单圈次观测情况下,尽管轨道预报精度较低,约为数千米量级,但是观测弧段内定轨精度可优于百米;在多圈次观测情况下,轨道改进效果显著,定轨精度优于50m,外推至4d的轨道预报精度为百米量级.此外,定量评估了每晚不同观测时间跨度下同步轨道目标的测定轨精度,为单站光电设备实际应用提供了参考.      

Determination of visible coordinates of the low-orbit space objects and their photometry by the CCD camera with the analogue output. Initial image processing

The number of artificial space objects in the low Earth orbit has been continuously increasing. That raises the requirements for the accuracy of measurement of their coordinates and for the precision of the prediction of their motion. The accuracy of the prediction can be improved if the actual current orientation of the non-spherical satellite is taken into account. In so doing, it becomes possible to directly determine the atmospheric density along the orbit. The problem solution is to regularly conduct the photometric surveillances of a large number of satellites and monitor the parameters of their rotation around the centre of mass. To do that, it is necessary to get and promptly process large video arrays, containing pictures of a satellite against the background stars.     

基于广义相对论的轨道摄动下星间激光相位比对

针对纳米到皮米量级星间激光测距,在地心非旋转坐标系(GCRS)下,考虑卫星轨道摄动引起的广义相对论效应,建立了星间单向以及双向星间激光相位比对模型.通过仿真研究了地球主引力场范围内轨道摄动引起的广义相对论效应对星间激光相位比对误差的影响,并通过星间激光相位比对误差计算星间激光测距误差.不同轨道高度的卫星仿真结果表明,对...     

Differential code bias estimation based on uncombined PPP with LEO onboard GPS observations

Differential Code Bias (DCB) is an essential correction that must be provided to the Global Navigation Satellite System (GNSS) users for precise position determination. With the continuous deployment of Low Earth Orbit (LEO) satellites, DCB estimation using observations from GNSS receivers onboard the LEO satellites is drawing increasing interests in order to meet the growing demands on high-quality DCB products from LEO-based applications, such as LEO-based GNSS signal augmentation and space weather research. Previous studies on LEO-based DCB estimation are usually using the geometry-free combination of GNSS observations, and it may suffer from significant leveling errors due to non-zero mean of multipath errors and short-term variations of receiver code and phase biases. In this study, we utilize the uncombined Precise Point Positioning (PPP) model for LEO DCB estimation. The models for uncombined PPP-based LEO DCB estimation are presented and GPS observations acquired from receivers onboard three identical Swarm satellites from February 1 to 28, 2019 are used for the validation. The results show that the average Root Mean Square errors (RMS) of the GPS satellite DCBs estimated with onboard data from each of the three Swarm satellites using the uncombined PPP model are less than 0.18 ns when compared to the GPS satellite DCBs obtained from IGS final daily Global Ionospheric Map (GIM) products. Meanwhile, the corresponding average RMS of GPS satellite DCBs estimated with the conventional geometry-free model are 0.290, 0.210, 0.281 ns, respectively, which are significantly larger than those obtained with the uncombined PPP model. It is also noted that the estimated GPS satellite DCBs by Swarm A and C satellites are highly correlated, likely attributed to their similar orbit type and space environment. On the other hand, the Swarm receiver DCBs estimated with uncombined PPP model, with Standard Deviation (STD) of 0.065, 0.037 and 0.071 ns, are more stable than those obtained from the official Swarm Level 2 products with corresponding STD values of 0.115, 0.101, and 0.109 ns, respectively. The above indicates that high-quality DCB products can be estimated based on uncombined PPP with LEO onboard observations.     

The GLONASS-M satellite yaw-attitude model

The proper modeling of the satellites’ yaw-attitude is a prerequisite for high-precision Global Navigation Satellite System (GNSS) positioning and poses a particular challenge during periods when the satellite orbital planes are partially eclipsed. Whereas a lot of effort has been put in to examine the yaw-attitude control of GPS satellites that are in eclipsing orbits, hardly anything is known about the yaw-attitude behavior of eclipsing GLONASS-M satellites. However, systematic variations of the carrier phase observation residuals in the vicinity of the orbit’s noon and midnight points of up to ±27 cm indicate significant attitude-related modeling issues. In order to explore the GLONASS-M attitude laws during eclipse seasons, we have studied the evolution of the horizontal satellite antenna offset estimates during orbit noon and orbit midnight using a technique that we refer to as “reverse kinematic precise point positioning”. In this approach, we keep all relevant global geodetic parameters fixed and estimate the satellite clock and antenna phase center positions epoch-by-epoch using 30-second observation and clock data from a global multi-GNSS ground station network. The estimated horizontal antenna phase center offsets implicitly provide the spacecraft’s yaw-attitude. The insights gained from studying the yaw angle behavior have led to the development of the very first yaw-attitude model for eclipsing GLONASS-M satellites. The derived yaw-attitude model proves to be much better than the nominal yaw-attitude model commonly being used by today’s GLONASS-capable GNSS software packages as it reduces the observation residuals of eclipsing satellites down to the normal level of non-eclipsing satellites and thereby prevents a multitude of measurements from being incorrectly identified as outliers. It facilitates continuous satellite clock estimation during eclipse and improves in particular the results of kinematic precise point positioning of ground-based receivers.     

基于GNSS的高轨卫星定位技术研究

利用全球卫星导航系统(GNSS)进行导航定位具有全球、全天候、实时和高精度的优点,应用于高地球轨道(HEO)卫星的定位,能够提供精确的轨道和姿态确定,并且可以克服目前主要利用地面测控系统对HEO卫星进行定位的设备复杂、投资高等缺点,使得自主导航成为可能.本文对利用GNSS的高轨卫星定位相关技术进行了研究,分析了单一GNSS系统和多个GNSS组合系统的卫星可见性、动态性和几何精度因子(GDOP).通过仿真分析表明,利用组合GNSS系统并通过提高GNSS接收机灵敏度的方法,可以解决GNSS进行HEO卫星定位的相关问题,并能保证HEO卫星定位精度的要求.      

In-orbit assessment of laser retro-reflector efficiency onboard high orbiting satellites

The navigation and geodetic satellites that orbit the Earth at altitudes of approximately 20,000 km are tracked routinely by many of the Satellite Laser Ranging (SLR) stations of the International Laser Ranging Service (ILRS). In order to meet increasing demands on SLR stations for daytime and nighttime observations, any new mission needs to ensure a strong return signal so that the target is easily acquirable. The ILRS has therefore set a minimum effective cross-section of 100 million square metres for the on-board laser retro-reflector arrays (LRAs) and further recommends the use of ‘uncoated’ cubes in the arrays. Given the large number of GNSS satellites that are currently supported by SLR, it is informative to make an assessment of the relative efficiencies of the various LRAs employed. This paper uses the laser ranging observations themselves to deduce and then compare the efficiencies of the LRAs on the COMPASS-M1 navigation satellite, two satellites from the GPS and three from the GLONASS constellations, the two GIOVE test satellites from the upcoming Galileo constellation, the two Etalon geodetic spheres and the geosynchronous communications test satellite, ETS-8. All the LRAs on this set of satellites employ back-coated retro-reflector cubes, except those on the COMPASS-M1 and ETS-8 vehicles which are uncoated. A measure of return signal strength, and thus of LRA-efficiency, is calculated using the laser-range full-rate data archive from 2007 to 2010, scaled to remove the effects of variations in satellite range, atmospheric attenuation and retro-reflector target total surface area. Observations from five SLR stations are used in this study; they are Herstmonceux (UK), Yarragadee (Australia), Monument Peak and McDonald (USA) and Wettzell (Germany). Careful consideration is given to the treatment of the observations from each station in order to take account of local working practices and system upgrades. The results show that the uncoated retro-reflector cubes offer significant improvements in efficiency.     

Formation control using μ-synthesis for Inner-Formation Gravity Measurement Satellite System

Inner-Formation Gravity Measurement Satellite System (IFGMSS) is used to map the gravity field of Earth. The IFGMSS consists of two satellites in which one is called “inner satellite” and the other one is named as “outer satellite”. To measure the pure Earth gravity, the inner satellite is located in the cavity of the outer satellite. Because of the shield effect of the cavity, the inner satellite is affected only by the gravitational force, so it can sense Earth gravity precisely. To avoid the collision between the inner satellite and the outer satellite, it is best to perform a real-time control on the outer satellite. In orbit, the mass of the outer satellite decreases with the consumption of its propellant. The orbit angular rate of the inner satellite varies with time due to various disturbing forces. These two parameters’ uncertainties make the C–W function be not so accurate to describe the formation behavior of these two satellites. Furthermore, the thrusters also have some uncertainties due to the unmodelled dynamics. To cancel the effects caused by the above uncertainties, we have studied the robust control method based on the μ-synthesis. This μ-synthesis eliminates the conservativeness and improves the control efficiency comparing with the H_∞ method. Finally, to test the control method, we simulate an IFGMSS mission in which the satellite runs in a sun synchronous circular orbit with an altitude of 300 km. The simulation results show the effectiveness of the robust control method. The performances of the closed-loop system with the μ-controller are tested by the μ-analysis. It has found that the nominal performance, the robust stability and the robust performance are all achieved. The transient simulation results further prove the control response is fast and the accuracy of the relative position meets the demand of the gravity measurement.