共查询到20条相似文献,搜索用时 46 毫秒
1.
天线远场测量方法广泛应用于卫星通信天线的性能测量,不同频段的测量会用到不同频段的标准喇叭天线,从而涉及到快速更换标准喇叭天线的问题。介绍了一种标准喇叭天线的转台结构,具有方位、俯仰、极化三轴调整能力,且易于快速更换,详细介绍了蜗轮蜗杆的结构组成、传动方式、参数设计。通过重量估算、传动效率和力矩计算,可知操作者可轻松转动方位、俯仰和极化组件系统。转台选用蜗轮蜗杆传动方式,具有传动比大,传动平稳,结构紧凑,无噪音,可自锁,测试过程中可查看旋转角度等特点。该标准喇叭天线转台可满足天线增益、天线方向图、G/T值、轴比等多种性能测试需求,验证天线的指标性能;针对天线不同频段的性能测试,1分钟内即可快速更换标准喇叭天线,并在实践中得到应用,为卫星通信天线性能指标的验证提供了便捷、高效的测量解决方案。 相似文献
2.
3.
4.
5.
6.
7.
8.
9.
依据振弦式陀螺的工作原理提出一种振弦式陀螺电磁驱动方案,分析了振弦式陀螺电磁驱动电学模型与动力学模型,初步设计了振弦式陀螺电磁驱动结构,运用MATLAB数值软件设定目标参数和初始值计算得到初始结构尺寸;应用Maxwell电磁软件分析了振弦式陀螺电磁驱动系统中永磁体尺寸、永磁体间距、背磁片、Halbach永磁体阵列等因素对电磁驱动模型气隙磁感应强度的影响;最后优化了振弦式陀螺结构模型并进行了电磁驱动结构模型仿真分析。结果表明,电磁驱动整体结构模型气隙磁感应强度得到很大提升,可以很好地降低陀螺功耗,提高陀螺框架驱动力,优化陀螺结构尺寸,从而验证了振弦式陀螺电磁驱动方案模型的可行性,为振弦式陀螺的结构优化设计与实际产品试制研究奠定了理论基础。 相似文献
10.
11.
介绍了一种新的刚体转动的四元数模型。这些模型可以提高再定向控制的对边界条件的适应能力,在此基础上还介绍了这些模型的一些实际应用。 相似文献
12.
A. A. Davydov 《Cosmic Research》2011,49(4):335-344
A communication satellite (small spacecraft) injected into a geosynchronous orbit is considered. Flywheel engines are used
to control the rotational spacecraft motion. The spacecraft after the emergency situation has passed into a state of uncontrolled
rotation. In this case, no direct telemetric information about parameters of its rotational motion was accessible. As a result,
the problem arose to determine the rotational satellite motion according to the available indirect information: current taken
from the solar panels. Telemetric measurements of solar panel current obtained on the time interval of a few hours were simultaneously
processed by the least squares method integrating the equations of rotational satellite motion. We present the results of
processing 10 intervals of the measurement data allowing one to determine the real rotational spacecraft motion and to estimate
the total angular momentum of flywheel engines. 相似文献
13.
14.
The problem of optimal control over many-revolution spacecraft orbit transfers between circular coplanar orbits of satellites is considered. The spacecraft flight is controlled by a thrust vector of a jet engine with restricted thrust (JERT). The mass expenditure is minimized at a limited time of flight. The optimal control problem is solved based on the maximum principle. The boundary value problem of the maximum principle is solved numerically using the shooting method. A modified computation scheme of the shooting method is suggested (multi-point shooting), as well as a method (correlated with the scheme) of choosing the initial approximation with the use of a solution to the optimization problem in the impulse formulation. The scheme and method allow one to construct many-revolution spacecraft orbit transfers. 相似文献
15.
热变形对天线指向机构的指向精度具有重要影响,但利用传统的设计方法很难实现对指向精度的准确计算,尤其是热变形对指向精度影响的研究工作更是少见。为此建立了机构的三维实体热-结构耦合有限元分析模型,根据有限元分析结果并结合机构的运动链关系,构建了各关键运动副运动误差的计算方法;在此基础上实现了机构指向误差的计算,研究了运动副名义、最大以及最小配合间隙条件下,温度载荷对各关键运动副运动误差和指向精度的影响。研究结果表明,温度载荷对关键运动副的运动误差以及机构的指向精度具有重要影响,随着温度载荷偏离常温数值的增加,指向误差不断增大,名义配合间隙条件下的指向误差最大。 相似文献
16.
为满足航天器微振动环境模拟的需要,开展了多自由度微振动时域波形复现控制方法研究。首先,介绍了基于时域波形复现的多自由度微振动环境模拟控制理论方法。其次,针对六自由度微振动激励系统,应用MATLAB软件建立了基于实测传递函数矩阵的多输入多输出微振动激励仿真系统,针对微振动时域波形复现闭环控制过程进行了算法编程,并给出了仿真的闭环控制流程图。最后,通过算例对多自由度微振动时域波形复现进行了数值仿真,以给定的白噪声为输入,模拟对实际存在的系统非线性、测量误差等影响因素的控制效果。仿真结果验证了多自由度微振动时域波形复现控制方法的可行性及有效性,所得结论可以为研究多自由度微振动时域波形复现控制系统提供参考。 相似文献
17.
18.
The problem of determining an estimation of current spacecraft motion parameters on the stage of its descent is solved on the basis of readings of an optoelectronic navigation system and additional information from the self-contained inertial navigation system at the most general assumptions on the nature of motion of the object and the statistical properties of the noise of the measuring devices. 相似文献
19.
10月14日,国际空间大学董事会主席拉姆·哈迪姆访问中国航天科技集团公司,就集团公司承办国际空间大学2007年暑期进修项目的筹备情况与集团公司人力资源部部长陈学钏、副部长白燕强交换了意见。陈学钏部长向哈迪姆通报了集团公司筹备这次活动的工作进展情况。据陈部长介绍,中国 相似文献