共查询到20条相似文献,搜索用时 62 毫秒
1.
设计的推进剂贮罐群液位自动监测系统,利用超声波对贮罐内推进剂的液位进行连续检测,实现了真正的非接触式测量,仪器安装维护简便,工作稳定可靠;系统利用RS-485进行数据通信,实现了对罐区贮罐液位的远程集中自动监测,要以和其它的系统方便地进行连接。 相似文献
2.
通过分析多传感器数据融合技术故障诊断方法与无人机PHM系统(故障预测与健康管理)的特点,在不改变当前无人机系统硬件组成的情况下,将多传感器信息融合技术运用于无人机PHM系统,实现对无人机系统的实时状态监测、健康评估和故障诊断。 相似文献
3.
4.
本文基于弹上系统进行测试的研究,详细叙述1553B总线的特点以及1553B总线的协议在弹上测试系统中的具体实现,然后阐述在测试系统中作为总线控制器和远程终端的实现方法,测试系统采用Lab VIEW实现主控机和测试终端的测试,能够对操作命令,测试数据以及数据通信状态实时进行记录,方便对数据的监测,经过实验测试,测试系统的测试效率高,误码率低。 相似文献
5.
讨论了三峡工程项目中水文监测系统的数据传送问题。在不改变系统工作状态的情况下,解决了计数值不能远传的技术问题;同时完成了计数器本身功能的远端实现。 相似文献
6.
7.
“伽利略”卫星在轨任务控制系统高级规范综述 总被引:1,自引:0,他引:1
重点描述了"伽利略"卫星在轨任务控制系统高级规范的相关内容,其中包括系统规范和子系统规范,如系统监测和控制子系统、遥测监测子系统、遥控指令子系统和数据归档子系统等;就如何借鉴"伽利略"卫星在轨任务控制系统高级规范,提出了一些开展我国星座卫星在轨任务控制系统设计的策略和方法,如设计方法、实现途径、自动化和安全策略等。 相似文献
8.
9.
10.
高分三号(GF-3)卫星具有全天时、全天候的对地观测能力,在水利行业领域具有巨大的应用潜力和优势。本文首先介绍了GF-3卫星在地表水体监测、洪涝监测、干旱灾害监测、水利工程监测等方面的理论方法和技术流程。在此基础上,进一步设计并开发了GF-3卫星水利示范应用系统,系统以水利业务网为运行管理环境,集成水资源监测评价和管理分系统、水旱灾害监测分系统、水利工程监测和评价分系统、基础空间数据库建设与更新分系统,支撑GF-3卫星数据的水利示范应用。最后通过GF-3卫星水利应用示范的开展,实现系统的业务化运行和水利应用专题产品的自动化生产和共享服务,提供4类14种专题产品,从而提高GF-3卫星数据的水利行业应用水平。 相似文献
11.
介绍了一种新的刚体转动的四元数模型。这些模型可以提高再定向控制的对边界条件的适应能力,在此基础上还介绍了这些模型的一些实际应用。 相似文献
12.
A. A. Davydov 《Cosmic Research》2011,49(4):335-344
A communication satellite (small spacecraft) injected into a geosynchronous orbit is considered. Flywheel engines are used
to control the rotational spacecraft motion. The spacecraft after the emergency situation has passed into a state of uncontrolled
rotation. In this case, no direct telemetric information about parameters of its rotational motion was accessible. As a result,
the problem arose to determine the rotational satellite motion according to the available indirect information: current taken
from the solar panels. Telemetric measurements of solar panel current obtained on the time interval of a few hours were simultaneously
processed by the least squares method integrating the equations of rotational satellite motion. We present the results of
processing 10 intervals of the measurement data allowing one to determine the real rotational spacecraft motion and to estimate
the total angular momentum of flywheel engines. 相似文献
13.
为满足航天器微振动环境模拟的需要,开展了多自由度微振动时域波形复现控制方法研究。首先,介绍了基于时域波形复现的多自由度微振动环境模拟控制理论方法。其次,针对六自由度微振动激励系统,应用MATLAB软件建立了基于实测传递函数矩阵的多输入多输出微振动激励仿真系统,针对微振动时域波形复现闭环控制过程进行了算法编程,并给出了仿真的闭环控制流程图。最后,通过算例对多自由度微振动时域波形复现进行了数值仿真,以给定的白噪声为输入,模拟对实际存在的系统非线性、测量误差等影响因素的控制效果。仿真结果验证了多自由度微振动时域波形复现控制方法的可行性及有效性,所得结论可以为研究多自由度微振动时域波形复现控制系统提供参考。 相似文献
14.
The problem of determining an estimation of current spacecraft motion parameters on the stage of its descent is solved on the basis of readings of an optoelectronic navigation system and additional information from the self-contained inertial navigation system at the most general assumptions on the nature of motion of the object and the statistical properties of the noise of the measuring devices. 相似文献
15.
The problem of optimal control over many-revolution spacecraft orbit transfers between circular coplanar orbits of satellites is considered. The spacecraft flight is controlled by a thrust vector of a jet engine with restricted thrust (JERT). The mass expenditure is minimized at a limited time of flight. The optimal control problem is solved based on the maximum principle. The boundary value problem of the maximum principle is solved numerically using the shooting method. A modified computation scheme of the shooting method is suggested (multi-point shooting), as well as a method (correlated with the scheme) of choosing the initial approximation with the use of a solution to the optimization problem in the impulse formulation. The scheme and method allow one to construct many-revolution spacecraft orbit transfers. 相似文献
16.
热变形对天线指向机构的指向精度具有重要影响,但利用传统的设计方法很难实现对指向精度的准确计算,尤其是热变形对指向精度影响的研究工作更是少见。为此建立了机构的三维实体热-结构耦合有限元分析模型,根据有限元分析结果并结合机构的运动链关系,构建了各关键运动副运动误差的计算方法;在此基础上实现了机构指向误差的计算,研究了运动副名义、最大以及最小配合间隙条件下,温度载荷对各关键运动副运动误差和指向精度的影响。研究结果表明,温度载荷对关键运动副的运动误差以及机构的指向精度具有重要影响,随着温度载荷偏离常温数值的增加,指向误差不断增大,名义配合间隙条件下的指向误差最大。 相似文献
17.
18.
19.