Interference Effects of Pseudo-Random Frequency-Hopping Signals

When a pseudo-random frequency-hopping signal is intercepted by a conventional receiver operating within the same frequency band, the interfering signal has the form of a pulse-amplitude modulated signal. Each pulse amplitude is dependent upon the hopping frequency and the selectivity characteristic of the victim receiver. The probability density function for the interfering pulse amplitude prior to demodulation is determined when the probability density function for the hopping frequency is uniform and the victim-receiver characteristic is 1) ideal flat bandpass, 2) single tuned, and 3) Gaussian shaped. It is shown that the average interfering pulse amplitude and interference power decrease as the frequency-hopping bandwidth increases with respect to the victim-receiver bandwidth. Fast Fourier transform computer techniques are used to obtain the probability density function of the interference amplitude in a Gaussian receiver when several (from 2 to 10) pseudo-random frequency-hopping systems are simultaneously using the same frequency band. The probability that the interference exceeds a prescribed threshold value is computed from the derived probability density functions. This probability may be used in signal-to-interference ratio calculations, to describe the capture effect, or to compute the expected number of clicks produced in an FM discriminator.     

Energy Detection of a Random Process in Colored Gaussian Noise

A likelihood receiver for a Gaussian random signal process in colored Gaussian noise is realized with a quadratic form of a finite-duration sample of the input process. Such a receiver may be called a "filtered energy detector." The output statistic is compared with a threshold and if the threshold is exceeded, a signal is said to be present. False alarm and detection probabilities may be estimated if tabulated distributions can be fitted to the actual distributions of the test statistic which are unknown. Gamma distributions were fitted to the conditional probability densities of the output statistic by equating means and variances, formulas for which are derived assuming a large observation interval. A numerical example is given for the case in which the noise and signal processes have spectral densities of the same shape or are flat. The optimum filter turns out to be a band-limited noise whitener. The factors governing false alarm and detection probabilities are the filter bandwidth, the sample duration, and the signal level compared to the noise. Two sets of receiver operating characteristic curves are presented to complete the example.     

On Signal and Noise Level Estimation in a Coherent PCM Channel

Joint maximum likelihood estimators are presented for the signal amplitude and noise power density in a coherent PCM channel with white Gaussian noise and a correlation receiver. The estimates are based upon the correlation coefficient outputs of the receiver. From these estimators, an estimator for the quantity (received signal energy)/bit/,(noise power)/(unit bandwidth) upon which the error probabilities depend, is derived. This estimator is shown to be useful as 1) a point estimator for the signal-to-noise ratio for the higher values of this ratio (about 4 dB or greater), and 2) an easily calculated statistic upon which to base data acceptance or rejection criteria. The acceptance or rejection levels are obtained by the use of confidence interval curves in conjunction with word error probability data.     

Logarithmic Detection with Postdetection Filtering

An analysis is presented of the performance of a logarithmic detector or followed by a low-pass filter, under the assumption of a large ratio of IF bandwidth to postdetection bandwidth. This allows for the probability of detection and similar quantities to be computed in a straightforward manner. The mean and variance of the filter output are found by first deriving the autocorrelation function of the logarithmic detector output and then obtaining the power spectral ral density. A useful engineering approximation is made for the variance which is valid for all signal-to-noise ratios.     

液体火箭发动机故障检测的阈值估计研究

采用区间估计方法选取故障检测阈值,进而以此阈值为标准监测液体火箭发动机的工作情况。基于分离识别信号的概率密度函数还讨论了故障分离的最优阈值问题。某大型液体火箭发动机的热试车数据分析表明:置信区间估计技术可以有效用于发动机故障检测。      

High-Resolution, Radar Coherent Linear FM Microwave Source

The microwave CLFM study was directed to generating 14 ?s S-band pulses of 1000 MHz bandwidth and an rms phase error of a few degrees. Over 972 MHz bandwidth, the sampled phase error relative to the reference was 7 degrees rms and 17 degrees peak, with a maximum Fourier component of 4 degrees. The FM pulse train is generated by a gated BWO driven by a stable linearizing waveform. Phase coherency during each pulse is obtained by a sampling technique, where the phase is corrected at intervals of 1/6 ?s, the RF phase having changed an integral number of cycles in each interval. Multiplication of the BWO signal by the sampling pulse train results in band-limited phase error pulses which are applied in a feedback loop. Pulse-to-pulse coherency is obtained by phase lock of the BWO starting frequency to the crystal reference. Feedback leveling holds the output constant to 0.3 dB. The basic MITRE technique was originally demonstrated at 10 MHz in 1964. Range results measured with the X-band model radar using the CLFM generator are given and confirm the phase errors of the CLFM.     

The Effect of Spectral Shape on the Probability of Error in Laser Binary Communication Systems

The effect of spectral bandwidth and spectral shape upon laser binary communication systems is investigated. The probability of error is plotted as a function of bandwidth for Lorentzian and Gaussian shaped spectra. The results show that even when the average noise power and the signal-to-noise ratio are held constant, the probability of error varies considerably as a function of spectral bandwidth.     

Imperfect Carrier Recovery Effect on Filtered PSK Signals

Coherent demodulation of a PSK signal requires the generation of a local carrier phase reference. Methods are given to determine the detection loss caused by noisy phase recovery and its use in the coherent detection of filtered BPSK and QPSK signals. It is assumed that the phase noise can have a static part and a random component with a Tikhonov-type distribution. The static part is mostly due to offset frequency tracking of the PLL used to recover the carrier, while the random component is due to thermal noise present in the carrier recovery loop and is also due to the random nature of the phase modulation. It is shown that the probability of error of BPSK and QPSK can be expressed as a finite sum of a set of strictly alternating converging series when the number of ISI terms is finite. Upper and lower bounds on the probability of error have been derived when this number becomes infinite and we show how this error rate can be computed with any desired accuracy. Numerical results are presented for various values of static error and phase noise variance when the transmit and receive filters are 4-pole Butterworth filters. For filtered PSK signals and for a bit error rate of 10-6, our results show that the additional degradation in presentday receiver systems due to imperfect carrier recovery can be less than 0.1 dB for BPSK and less than 1 dB for QPSK.     

短波信道数字传输脉冲成形技术研究

短波窄带信道上的数据传输,要求将信号的带宽限制在3kHz语音频带内,当系统带宽小于数据信息所需的奈奎斯特最小带宽时,脉冲时域范围的扩展产生的码间串扰会降低系统的误差性能。文章阐明了脉冲成形技术可以压缩信号的频谱,分析了恰当选择的平方根升余弦脉冲成形滤波器可以明显提高短波信道数据传输的误差性能。     

A Method for Setting a Test Signal Level Relative to Noise

A method is described for adjusting the leval of an RF test signal generator relative to the noise level at the receiver output. The method compares a detected output to a threshold and counts the number of times noise and signal plus noise cross the threshold in a given number of tries. By setting the threshold at a given false alarm probability for noise alone and then adding the test signal and adjusting its level to give a specified detection probability, the signal-to-noise ratio can be calibrated to an accuracy that depends on the number of samples used to measure the probabilities. The false alarm and detection probabilities are given for best accuracy as well as the rms error in signal-to-noise ratio as a function of the number of samples used.     

加工误差对2 维叶型损失系数影响的数值分析

叶片加工时由于公差和误差等原因其形状和尺寸往往会偏离设计状态,由此对叶片的气动性能造成严重影响。为了找到其中的规律,发展了1套简便可行的误差函数,在此基础上得到考虑了加工误差后的实际叶型。通过数值模拟得到了实际叶型的气动性能,并对其进行统计分析,验证了所采用的误差函数是可行的。计算了实际叶型的设计参数(如弦长、前尾缘半径、进出口金属角、最大厚度及其位置等),发现最大厚度和前缘半径的变化是导致实际叶型气动性能发生变化的最重要原因。在不同公差下,计算得到最小损失系数的概率密度函数,结合不同设计对叶型气动性能的不同要求,可用于评估设计和选取性价比最高的加工方式。     

Monopulse Radar Angle Tracking Accuracy with Sum Channel Limiting

The variance of angle tracking error is found for an amplitude-comparison form of monopulse radar when the sum channel contains a limiter prior to the angle error detector. The error expression is valid for any shape of transmitted pulse and any duration of range tracking gate but does assume matched filters in signal processing channels. The procedures used are rigorous and an example of results is worked out for the special case of a rectangular transmitted pulse envelope. It is shown, for rectangular pulses, that achievable angle tracking error variance with sum channel limiting is not more than 2.22 dB larger than the theoretical minimum for any processor and not more than 1.29 dB larger than a similar signal processor that uses a "linear" angle error detector. Results apply for large single-pulse signal-to-noise ratio.     

Optimum Signals for Radar

The research reported herein deals with the general problem of the selection of radar waveforms. The investigation is specifically concerned with the synthesis of radar signals which are optimum in the sense that they are characterized by ambiguity surfaces minimized over certain predetermined regions of the ambiguity plane. The weighted ambiguity surface is utilized as the weighted error criterion. This error criterion is mathematically tractable and pertinent to radar system performance but is not unduly restrictive as some orientation parameters are left unspecified for subsequent cost or penalty function analysis. The signal optimization is approached by variational techniques augmented by equality and inequality constraints, for example, limiting the amount of bandwidth or frequency modulation to be less than some system requirement. Several examples are presented demonstrating the optimization techniques and providing a minimum error for the stated problem. It is shown that for any given type of amplitude modulation of the radar signal, the variance or dispersion of the ambiguity surface is not decreased for any type of phase modulation added. The optimum signal for an elliptical weighting function is derived for several cases. The minimum error is shown to depend upon the constraints and the unspecified orientation parameters and, for one case, on the second moment of the signal.     

M-ary CPSK Detection with Noisy Reference and Interferences

A general expression of the error probability on an M-ary coherent phase-shift-keyed (MCPSK) signal purturbed by a noisy reference carrier, multiple interferences, and additive Gaussian noise is presented taking into account the frequencey divider in the carrier recovery circuit. First, a new expression for the probability density function (pdf) of the phase of a composite wave of signal, multiple interferences, and additive Gaussian noise is derived. Then this result and a pdf of the phase error modified from the Tikhonov distribution are used to obtain the erro probability of an MCPSK detector. In addition, the comparison between the error probabilities with and without the frequency divider is given, and it is found that the estimation is more pessimistic when the frequency divider is included.     

An Adaptive Two-Dimensional Kalman Tracking Filter

A continuously adaptive two-dimensional Kalman tracking filter for a low data rate track-while-scan (TWS) operation is introduced which enhances the tracking of maneuvering targets. The track residuals in each coordinate, which are a measure of track quality, are sensed, normalized to unity variance, and then filtered in a single-pole filter. The magnitude Z of the output of this single-pole filter, when it exceeds a threshold Z1 is used to vary the maneuver noise spectral density q in the Kalman filter model in a continuous manner. This has the effect of increasing the tracking filter gains and containing the bias developed by the tracker due to the maneuvering target. The probability of maintaining track, with reasonably sized target gates, is thus increased, The operational characteristic of q versus Z assures that the tracker gains do not change unless there is high confidence that a maneuver is in progress.     

Performance analysis of GPS carrier phase observable

The accuracy analysis of Global Positioning System (GPS) carrier phase observable measured by a digital GPS receiver is presented. A digital phase-locked loop (DPLL) is modeled to extract the carrier phase of the received signal after a pseudorandom noise (PRN) code synchronization system despreads the received PRN coded signal. Based on phase noise characteristics of the input signal, the following performance of the first, second, and third-order DPLLs is analyzed mathematically: (1) loop stability and transient process; (2) steady-state probability density function (pdf), mean and variance of phase tracking error; (3) carrier phase acquisition performance; and (4) mean time to the first cycle-slipping. The theoretical analysis is verified by Monte Carlo computer simulations. The analysis of the dependency of the phase input noise and receiver design parameters provides with an important reference in designing the carrier phase synchronization system for high accuracy GPS positioning     

Incoherent radar detection in compound-Gaussian clutter

The detection of incoherent pulse trains in compound-Gaussian disturbance with known spectral density is dealt with here. Two alternative approaches are investigated, The first, assuming perfect knowledge of the signal fluctuation law and implementing the Neyman-Pearson test on the observed waveform, turns out to be not applicable to the radar problem. The second, instead, relying on the generalized likelihood ratio optimization strategy, leads to a canonical detector, whose structure is independent of the clutter amplitude probability density function. Interestingly, this detector turns out to be constant false-alarm rate in the sense that threshold setting does not require any knowledge as to the clutter distribution, Moreover, since such a processor is not implementable in real situations, we also present an FFT-based (fast Fourier transform) suboptimum structure. Finally, we give closed-form formulas for the detection performance of both receivers, showing that both of them largely outperform the square-law detector, especially in the presence of very spiky clutter     

机动多目标跟踪问题中关联区域的研究

 本文研究了跟踪多个机动目标时,由滤波算法所获得的新息向量范数的统计性质,关联区域的大小以及接收正确回波的概率。借助拉蒙特卡洛方法,考察了不同的目标状态模型、目标机动加速度及状态噪声方差等因素对所研究的问题的影响。研究表明,文献[1]所提出的机动目标状态模型及相应的自适应算法具有较好的适应目标机动的能力,关联区域的大小及接收正确回波的概率均较为稳定。     

脉冲测试系统最佳带宽的数值计算

由于受测试系统带宽的限制，脉冲信号在测试过程中其能量将受到不同程度的损失。本文用Romberg数值积分法计算出在一定能量损耗限值要求下的脉冲信号频谱宽度，并用付氏级数对其进行了信号重构验证，据此得出了脉冲信号测试系统带宽的最佳值。     

一种提高脉冲雷达多普勒相位精度的方法

针对低信噪比条件下脉冲雷达模糊多普勒相位精度较低,可能导致相位测距时不能正确解相位模糊问题,基于EMD（Empirical Mode Decomposition,经验模式分解）区间阈值去噪方法,提出了一种新的提高多普勒相位精度的方法：利用EMD分解后各层信号的频率特性和能量特性,选取合适的阈值,并对各层信号进行区间阈值化处理,在提高信号信噪比的同时保持了信号的连续性.分别在回波信号噪声为高斯白噪声和AR（2）相关噪声的情况下,以及不同信噪比条件下,对该方法进行验证.仿真结果表明：在低信噪比条件下,当回波信号噪声为白噪声和相关噪声时,EMD区间阈值去噪方法能将回波信号信噪比提高5 dB,去噪性能优于小波阈值去噪方法,其对应多普勒相位精度能提高1倍以上.