Medium PRF radar PRF selection using evolutionary algorithms

Evolutionary algorithms are applied to the optimization of pulse repetition frequency (PRF), for both eight-and nine PRFs, in medium PRF radar while considering the detailed effects of sidelobe clutter and many other technical factors. The algorithm presented also ensures that all the solutions produced are fully decodable and have no blind velocities. The evolutionary algorithm was able to identify near-optimum PRF sets for a realistic radar system with only a modest computational effort.     

Ambiguity resolution of multiple targets using pulse-Dopplerwaveforms

To cancel clutter, both medium-PRF waveforms which are ambiguous in both range and Doppler and high-PRF waveforms which are ambiguous in range but unambiguous in ambiguities, a previous paper has shown that superior results for a single target can be achieved by using a clustering algorithm. Here, the problem of multiple targets is considered. A maximum likelihood (ML) technique which incorporates the clustering algorithm is developed for the multiple target problem. Simulation results show that four targets which have the same speed but are at different ranges can be resolved by using a medium-PRF waveform and employing the ML resolution technique     

分步北斗三频部分模糊度解算方法

随着月球探索进入一个新的时代,为确保未来月球任务的实时高精度定位,大幅提高登月航天器的自主性,且减少对地球基站的依赖,选取合适的轨道构建月球导航星座,并且实现月球导航星座与地球GNSS的通信链路同步尤为重要。为评估月球导航星座轨道中卫星接收GNSS信号的性能,首先对椭圆形月球冻结轨道(ELFO)、近直线晕轨道(NRHO)、顺行圆形轨道(PCO)和低月球轨道(LLO)4种轨道进行仿真。然后基于天线方向图等指标仿真了GNSS卫星信号,并依据主旁瓣波束宽度和载噪比等仿真结果评估了4种不同轨道卫星对GNSS的可见性。结果表明,NRHO和ELFO对GNSS星座有较好的可视效果,最高可见时间占比达99.57%,保障了绝大部分时间内能够稳定接收GNSS信号,有助于实现月球导航星座轨道卫星的轨道和时钟校正,并保证轨道的定位性能。     

Integer ambiguity resolution in GPS for spinning spacecrafts

A procedure to compute the integer ambiguity problem when a GPS receiver is used in a multiple antenna configuration attached to a rotating spacecraft is presented. The method is applied to a simulation of an experimental satellite which uses the GPS receiver for attitude determination     

Medium PRF set selection using evolutionary algorithms

This paper presents a new and novel method of selecting multiple pulse repetition frequency (PRF) sets for use in medium PRF pulsed-Doppler radars. Evolutionary algorithms are used to minimise the blind areas in the range/Doppler space. The evolutionary algorithm allows optimal solutions to be generated quickly, far faster than with exhaustive searches, and is fully automatic, unlike existing techniques. The evolved solutions compare very favorably against the results of both an exhaustive search and existing published PRF set selection methods. This evolutionary approach to generation of PRF sets is a major advance in medium PRF radar design.     

Performance comparison of PRF schedules for medium PRF radar

Previous work has shown how evolutionary algorithms (EAs) are an effective tool in optimising the selection of pulse repetition frequency (PRF) values of medium PRF schedules in an airborne fire control radar (FCR) application requiring target data in three PRFs. The optimisation is driven by the requirement to minimise range/Doppler blindness whilst maintaining full decodability. In this paper we detail work in which the optimisation process is applied to design novel short medium PRF schedules requiring target data in just two PRFs. The paper reports on the testing of a variety of near-optimum schedules to compare their blindness, decoding, and ghosting performances. The results show that in many situations, the 2 of N schedules are a practical alternative to conventional 3 of N processing.     

BDS-3 PPP模糊度固定实现及精度评估

精密单点定位(PPP)模糊度固定(AR)能够显著提升精密定位的收敛速度和精度。通过在BDS-2和BDS-3之间添加系统间偏差的方法实现BDS-3的模糊度固定,并基于全球MGEX测站静态、仿动态数据和车载实验数据全面评估了BDS-3模糊度固定的效果。结果表明,相对于浮点解,BDS-3 PPP模糊度固定能够显著提升PPP的精度,在东北天3个方向上静态解算精度提升依次为37.4%、26.2%和20.1%;仿动态解算精度提升依次为38.3%、27.2%和11.1%;车载动态实验BDS-3模糊度固定精度在三维方向上综合提升为40.4%。此外,模糊度固定后,以浮点解稳定后的两倍定位精度为基准,在东北天方向上,静态定位时间提升程度依次为63.5%、64.0%和40.3%;仿动态定位时间提升程度依次为58.7%、56.8%和25.4%;车载实验在三维方向的收敛时间为30.0 min。以上结果证明了所提方法的有效性及BDS-3模糊度固定的性能提升。     

GEO星弹双基SAR多普勒分辨率特性分析

通过对地球同步轨道（GEO）卫星运动特点的分析,阐明其对多普勒分辨率的影响。传统的双基合成孔径雷达（SAR）多普勒分辨率表达式由于不考虑雷达平台加速度矢量带来的影响,并不适用于GEO星弹双基SAR系统。根据收发平台的双曲线轨迹对目标的回波多普勒特性影响,首先利用梯度方法推导了GEO星弹双基SAR系统的多普勒分辨率表达式;随后详细地分析了GEO卫星与导弹的空间几何关系及多普勒参数,特别是加速度矢量对多普勒分辨率的影响。仿真结果验证了所推导多普勒分辨率表达式的有效性,其有助于双基SAR理论系统完整性的提高,为后续系统设计及应用实践提供理论支撑。     

Mitigating Range Ambiguity in High PRF Radar using Inter-Pulse Binary Coding

The paper proposes a way to increase the energy within a coherent processing interval (CPI) using more pulses instead of longer pulses. Long coded pulses result in masking targets at close range and poor Doppler tolerance. Increasing the number of pulses implies high pulse repetition frequency (PRF), which suffers from range ambiguity and target folding. These drawbacks of a high PRF can be mitigated by inter-pulse coding. The approach suggested here should be attractive for close and mid range applications of radar, ground penetrating radar, ultrasound imaging, and more.     

Medium PRF Performance Analysis

A discussion of various types of x-band airborne radars is presented together with their systematic development through the years to the present time. Starting with simple, low pulse-repetition frequency (PRF) radars for measuring radar-target range, airborne radar development proceeded with more sophisticated high PRF Doppler radars where radar-target range and range rate were measured simultaneously. The use of Doppler (frequency) in signal processing allowed the separation of moving from nonmoving targets (ground), enabling the detection of moving targets in the presence of ground clutter. More recent developments in waveform generation and selection has resulted in the development of medium PRF radars, whereby a greater degree of tactical flexibility in target detection is achieved by combining the desirable features of both low and high PRF radars. Part of the available literature gives an overview, together with a specific example of the design and performance of an airborne medium PRF radar. Here, however, the systematic evolution of these radars is emphasized and the necessary theoretical background is developed for their performance calculations. Modern day airborne radars may be equipped with all three modes of operation, low, medium, and high PRF, allowing the operator to utilize the mode best suited for the tactical encounter. Low PRF and high PRF radars have been described elsewhere and are given here primarily for the sake of completeness and for the necessary background for developing medium PRF radar equations. They are also needed for developing the reasons why medium PRF radars came into being.     

Improving slant-range resolution with multiple SAR surveys

Across-track resolution of a spaceborne synthetic aperture radar (SAR) system is limited by power and data rate constraints. The authors derive and discuss a new technique for increasing the across-track resolution of objects that do not change with time, using multiple surveys of the same area from different off-nadir angles. Precise information on the spaceborne trajectories are not requested since they can be derived from SAR interferometry. Simulated data show that theoretical derivations are in good agreement with practice     

Resolution of a 2π ambiguity problem in multiple frequencyspectral estimation

An algorithm is proposed to resolve a fundamental 2π ambiguity problem occurring in multiple frequency spectral estimation. Given M frequencies f_m, and I separate frequency estimators with unambiguous bandwidths F_i, the ambiguity problem can be stated as solving for the fm, given the estimator outputs, α_mi, (1⩽m⩽M;1⩽i⩽I) where f_m=α_mi+K_miF_i and K_mi is some integer. The proposed algorithm exhaustively resolves all possible α_mi groupings into single frequency values using a noise insensitive technique that exchanges system bandwidth for noise protection. The correct multiple frequencies are then defined as the single frequencies that repeat a specified number of times. A complete analysis is included     

Cascaded detector for multiple high-PRF pulse Doppler radars

A postdetection design methodology for a multiple high-pulse-repetition frequency (PRF) pulse Doppler radar has been developed. The postdetection processor consists of an M out of N detector where range and target ambiguities are resolved, followed by a square-law detector which enhances the minimum signal-to-noise (S/N) power-ratio per pulse burst performance. For given probabilities of false alarm and detection, formulas are derived from which the three thresholds associated with the cascaded detector can be found. Fundamental tradeoffs between the minimum S/N required, number of ghosts, and the number of operations (NOPs) that the cascaded detector must perform are identified. It is shown that the NOPs and the number of ghosts increase and the minimum S/N required decreases as the binary M out of N detector passes more detections to the square-law detector     

Reduced-rank STAP for high PRF radar

Due to the range ambiguity of high pulse-repetition frequency (HPRF) radars, echoes from far-range fold over near-range returns. This effect may cause low Doppler targets to compete with near-range strong clutter. Another consequence of the range ambiguity is that the sample support for estimating the array covariance matrix is reduced, leading to degraded performance. It is shown that space-time adaptive processing (STAP) techniques are required to reject the clutter in HPRF radar. Four STAP methods are studied in the context of the HPRF radar problem: low rank approximation sample matrix inversion (SMI), diagonally loaded SMI, eigencanceler, and element-space post-Doppler. These three methods are evaluated in typical HPRF radar scenarios and for various training conditions, including when the target is present in the training data     

False alarm control using Doppler estimation

A technique which uses maximum-likelihood estimates (MLEs) of target Doppler and target amplitude is developed for rejecting clutter residues. Multiple estimates are made and consistency checks are applied to the estimates. Simulation results indicate that for large clutter-to-noise ratios (C/N⩾55 dB) the probability of false alarm from clutter residues is reduced from 1.0 to below 0.01     

Properties of Staggered PRF Radar Spectral Components

Expressions for moving target indicator (MTI) improvement factor limitation due to pulse repetition frequency (PRF) staggering and loss of target detectability for various values of Doppler frequency in the passband are presented. It is also shown that the product of variance of stagger periods and clutter variance is an important parameter determining the performance of a staggered PRF MTI radar.     

Automatic target recognition using enhanced resolution SAR data

Using advanced technology, a new automatic target recognition (ATR) system has been developed that provides significantly improved target recognition performance compared with ATR systems that use conventional synthetic aperture radar (SAR) image-processing techniques. This significant improvement in target recognition performance is achieved by using a new superresolution image-processing technique that enhances SAR image resolution (and image quality) prior to performing target recognition. A computationally efficient two-level implementation of a template-based classifier is used to perform target recognition. The improvement in target recognition performance achieved using superresolution image processing in this new ATR system is quantified     

Clutter Spectra of Low PRF AMTI Pulse-Doppler Radar

Approximate expressions are derived for the video clutter spectra in the receiver of a low pulse repetition frequency (PRF), airborne moving target indicator (AMTI), pulse-Doppler radar for both step-scanning and continuous-scanning antennas. The receiver is assumed to process the received waveform with a clutter-tracking oscillator and a window function is employed to obtain short-term spectra. Except for the broadening effects of the window function, it is shown that the clutter spectrum can be simply related to the antenna voltage-gain pattern. It is further shown, in the scanning antenna case, that the combined spectral broadening due to platform motion and antenna scanning cannot be assumed to be the result of the convolution of the separate effects unless the antenna gain pattern has a Gaussian shape. The approximate clutter expressions are illustrated by examples and are shown to agree well with the results of computer calculations.     

弹载合成孔径雷达自适应重频分析与设计

弹载合成孔径雷达(Synthetic Aperture Radar,SAR)的目标距离、视线角由于高速逼近目标而快速变化,这导致传统的固定脉冲重复频率(Pulse Repetition Frequency,PRF)(简称重频)波形难以兼顾弹载SAR雷达在成像各方面的约束条件,故需要根据当前弹体运动和弹目关系变化情况实时计算重频。详细分析了影响重频选择的各项因素,包括避免距离模糊、方位模糊、高度杂波、发射遮挡影响及SAR成像分辨率、系统相参性要求等影响因素,并设计了自适应重频计算的工作流程。某SAR雷达系统实验表明,该设计能够在实际飞行弹道条件下根据实际弹目关系自适应调整脉冲重复频率,从而更好地实现SAR雷达系统的工作性能,有效解决了固定重频波形不能适应弹载SAR工作条件的难题。     

Ship target recognition using low resolution radar and neuralnetworks

The classification of ship targets using low resolution down-range radar profiles together with preprocessing and neural networks is investigated. An implementation of the Fourier-modified discrete Mellin transform is used as a means for extracting features which are insensitive to the aspect angle of the radar. Kohonen's self-organizing map with learning vector quantization (LVQ) is used for the classification of these feature vectors. The use of a feedforward network trained with the backpropagation algorithm is also investigated. The classification system is applied to both simulated and real data sets. Classification accuracies of up to 90% are reported for the real data, provided target aspect angle information is available to within an error not exceeding 30 deg