共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
4.
2010年,将开启21世纪第二个十年。回首过去的十年,中国民航经历了一系列未曾预计到的挑战。首先是恐怖主义威胁。2001年的9.11事件,空前地将全世界的目光聚焦在恐怖主义对航空业的威胁上,世界民航业为此付出了惨重代价。对中国民航的影响要小一些, 相似文献
5.
[编者按]亚洲国际航空展览会暨论坛将于今年9月在香港举行,本届展会将延续以往的B2B模式,致力于为航空公司,飞机、发动机制造商及航空电子、机舱维修和物流等业内专业人员提供交流的平台.究竟本届亚洲航展的规模如何?有哪些值得我们关注的亮点?带着这些问题,本刊记者采访了主办单位励展博览集团华东区副总裁李雅仪女士. 相似文献
6.
7.
8.
9.
近年,不只是军用飞机,民用飞机结构材料中的以碳纤维为代表的先进复合材料也获得广泛的应用.图1为飞机结构重量中复合材料所占的百分比的变化情况.到1985年,复合材料所占的比重还没超过10%,但从B2、F-18E/F、V22的开发起,复合材料的百分比的确在持续增加,如在欧洲战斗机上占到45%,F-35也占到30%.在民用飞机上同样是这种趋势. 相似文献
10.
朱超 《航空精密制造技术》2007,43(6)
"最大限度满足顾客的需求",这一不变的信念伴随着北京凝华实业有限公司走过了13年的风风雨雨,如今,这个观念已经深入到企业经营理念和企业文化的方方面面,并不断通过业务流程的重组和人员区域化的设置,成为公司上下遵从的理念。此外,凝华的"诚信、卓越、责任、中兴"价值观将全体员工的心凝聚在一起,尽展个人才华。而对于公司的常务副总裁李欲超先生来说,思考更多的,则是公司的发展方向。 相似文献
11.
在大功率航空发电机等领域,迫切需要研制使用温度超过450 ℃的高温永磁材料。然而,NdFeB永磁材料使用温度低于80 ℃,耐高温NdFeB永磁材料的使用温度也低于150 ℃;商业2∶17型Sm2Co17永磁体使用温度范围低于300 ℃。近年来,研制使用温度超过450 ℃的高温永磁材料成为该领域研究的热点问题。本文用粉末冶金的方法,制备了不同z值的Sm(CobalFe0.1Cu0.1Zr0.04)z(z=6.5~7.5)合金样品。系统研究了z值对合金结构、磁性能的影响规律。室温下z=7.3的合金矫顽力最大,超过2 400 kA/m;773 K时,z=7.1的合金矫顽力最大,达到640 kA/m。高温条件下合金的磁性能和退磁曲线的方形度降低。合金z值对内禀矫顽力温度系数影响显著,其中z=6.9的合金,内禀矫顽力温度系数最低,仅为-0.052%/℃,z≤6.7或z≥7.1时,均导致内禀矫顽力温度系数增大。 相似文献
12.
L. Metcalfe M. Aberasturi E. Alonso R. Álvarez M. Ashman I. Barbarisi J. Brumfitt A. Cardesín D. Coia M. Costa R. Fernández D. Frew J. Gallegos J. J. García Beteta B. Geiger D. Heather T. Lim P. Martin C. Muñoz Crego M. Muñoz Fernandez A. Villacorta H. Svedhem 《Space Science Reviews》2018,214(4):78
The ExoMars Trace Gas Orbiter (TGO) Science Ground Segment (SGS), comprised of payload Instrument Team, ESA and Russian operational centres, is responsible for planning the science operations of the TGO mission and for the generation and archiving of the scientific data products to levels meeting the scientific aims and criteria specified by the ESA Project Scientist as advised by the Science Working Team (SWT). The ExoMars SGS builds extensively upon tools and experience acquired through earlier ESA planetary missions like Mars and Venus Express, and Rosetta, but also is breaking ground in various respects toward the science operations of future missions like BepiColombo or JUICE. A productive interaction with the Russian partners in the mission facilitates broad and effective collaboration. This paper describes the global organisation and operation of the SGS, with reference to its principal systems, interfaces and operational processes. 相似文献
13.
The Coronal Mass Ejection (CME) is arguably the most important discovery of solar eruptive phenomena in the 20th century. It is now also recognized that CMEs have great impact on the Earth's environment by inducing geomagnetic storms. Thus, development of simulation models to understand the physical mechanisms of CME initiation and propagation has become a challenge in the solar MHD community. In this paper we shall summarize chronologically the development of the theoretical analyses, and the successes and failures of the numerical magnetohydrodynamic (MHD) simulations of coronal mass ejections (CMEs) during the past two decades. The chronological development of numerical simulation models and the evolution of the numerical methods to treat this class of problems are presented. The most appropriate way to model CMEs is to have (i) a realistic pre-event coronal atmosphere, and (ii) realistic driving mechanisms. Details of the progress and assessment of the theoretical and modeling efforts for the understanding of the physics of the CME initiation and propagation will be presented, and the numerical methods to construct these simulation models will be discussed. 相似文献
14.
采用粉末烧结法制备了Al/Tb0.3Dy0.7Fe1.95磁致伸缩复合材料,研究了烧结温度对烧结体的显微结构、相组成、磁致伸缩、抗压强度等性能的影响.研究结果表明,600 ℃烧结时,烧结体中仍主要存在Al与GMM合金相,烧结获得较理想的相分布状态.随着烧结温度的增加,复合体中非GMM相越来越多,原始相减少.当1200 ℃烧结时,烧结体中主要存在杂相,已几乎没有GMM相.随着烧结温度的增加,复合材料的λs和抗压强度明显下降,烧结温度为600 ℃时,烧结体的λs和抗压强度最大,分别为405×10-6和61.71MPa.其不足是,复合材料仍呈现明显的脆性特征. 相似文献
15.
16.
17.
18.
19.
20.