单通道窄体客机气动力设计技术分析

气动力设计是单通道窄体客机的重大关键技术,对飞机性能影响重大。初步梳理和简要分析窄体客机的气动力设计技术,主要方法是典型机型的实例研究和相关数据统计分析和对比,内容包括机翼气动力设计、增升装置、翼梢小翼、CFD技术应用等。机翼气动力设计分析部分首先概述设计重要性和要求;之后给出典型飞机机翼气动力设计实例及主要参数统计数据,包括翼型、平面形状、飞机性能参数等;列出机翼内段-翼根区域气动设计、短舱-吊挂-机翼一体化设计等设计研究课题并简析。增升装置部分首先分析设计难点和问题,之后统计分析波音737和A320各代机型的增升装置设计,包括前缘后缘增升装置类型和主要参数等。翼梢小翼部分给出融合式小翼、双羽小翼减阻数据和展向升力分布改善图。最后简要介绍了波音公司、空中客车公司和我国CFD技术发展应用情况。     

等离子体气动激励改善增升装置气动性能的试验

针对流动分离导致飞机增升装置气动性能下降的问题,进行了脉冲等离子体气动激励抑制增升装置流动分离的试验。研究了等离子体气动激励的频率、占空比及激励位置等参数对流动控制效果的影响。研究结果表明：等离子体气动激励通过加速近壁面附面层,增强附面层内的能量掺混,可有效抑制主翼和襟翼表面的流动分离,改善增升装置气动性能。在主翼前缘施加激励,可有效控制主翼表面大迎角下的失速分离,最大升力系数增大18.1%、临界失速攻角提高4°;在襟翼前缘施加激励,可有效抑制襟翼表面的流动分离,显著减小阻力,在4°迎角下,将试验模型阻力系数减小了28.7%,升力系数提高了7.1%。占空比对控制效果有较大影响,当占空比为10%～30%时,激励的非定常性更强,控制效果最好;占空比为50%的控制效果次之,占空比为100%时的控制效果最差。来流速度越高,逆压梯度越大,流动分离更难被抑制,控制效果也变差。该研究为在增升装置上应用等离子体流动控制技术提供了理论和方法的基础。     

Real-time expert systems for advanced power control (a statusupdate) [aerospace power system testbed]

The most recent developments in the Boeing Aerospace Autonomous Power System (APS) testbed are presented. The APS testbed is a 28-VDC system with 3-kW capability, assembled for use in developing improved control, techniques for aerospace electrical power systems. The main emphasis is on the development of a sophisticated programming environment to control concurrent execution of multiple autonomous algorithms coupled with a continuous input/output data flow. The integration of high-level control algorithms used for battery charge control into a real-time execution environment is discussed. This includes methods that allow several functions to respond to real-time input, affect/maintain expert system (shared) memory, and control the electrical power system configuration. Sophisticated schemes for scheduling these expert system control functions are required to allow real-time multitasking     

大型客机后缘铰链襟翼气动机构一体化设计研究

我国正在开展大型客机的研制工作,增升装置设计是其中的关键技术之一。借鉴A350和波音787的后缘增升装置及其机构特点,研究了后缘铰链襟翼气动和机构一体化的设计。后缘铰链襟翼,是利用简单铰链机构驱动的后缘单缝襟翼增升装置,该机构由于构造简单、维护方便、制造成本低等优点备受青睐。详细介绍了基于CATIA二次开发创建的后缘铰链襟翼气动机构一体化设计模块,并嵌入到原大型飞机增升装置气动机构一体化设计平台上,获得较好的效果,为我国未来大型客机增升装置设计奠定了技术储备。     

Design of Boeing 777 electric system

The electric power system for the Boeing 777 is comprised of two independent electrical systems, the main and the backup. The main electric system includes two engine-driven integrated drive generators, a generator driven by the auxiliary power unit, three generator control units, and a bus power control unit. The backup electric system includes two engine-drive generators and one integrated converter/control unit to provide the redundancy of electrical sources equivalent to a three-engine airplane. Automation of the system is achieved by the use of state-of-the-art, microprocessor-based control units that perform system control, protection, and built-in-test functions. Each control unit has redundant two-way communication through an ARINC 629 communication bus that requires significantly fewer discrete wires than similar systems, allowing considerable reduction of the interface circuits and reduction in weight     

微型后缘装置增升效率及几何参数影响研究

 为满足现代大型飞机增升装置简洁高效的设计需求,以典型三段翼型为对象,采用数值模拟研究在后缘襟翼上增加微型后缘装置(mini-TED)以提高增升装置效率的可行性;给出了微型后缘装置的作用原理,获得了微型后缘装置位置、长度、偏度等几何参数对增升和升阻性能的影响规律。研究结果表明:微型后缘装置明显改变了襟翼后缘弯度,对襟翼流动产生有利诱导作用,拓展加长了增升装置的有效"气动弦长",是一种附加气动襟翼。其几何参数设计原则是:以长度l≤1.5%c(c为干净翼型弦长)、位于95%襟翼弦向位置前较为合适;偏度则可根据起降等飞行状态进行选择。与四段及其以上增升装置相比,微型后缘装置具有增升效果显著、结构简单、附加重量小和易于工程实现等优点,是一种极具潜力的新型增升技术,具有深入的研究价值和良好的应用前景。     

波音777飞机高升力控制系统余度管理分析

飞行控制系统普遍采用余度技术来提高自身的任务可靠性。余度部件效能的发挥程度主要取决于余度管理策略和方法。根据波音777飞机高升力控制系统的基本构架,通过在线监控与信号表决相结合的方法对系统余度管理方法进行研究。在余度管理方法的设计过程中,充分考虑了布线技术、硬件设计技术及与软件相结合的方法,不但简化了襟缝翼控制器的硬件设计,同时也简化了控制器软件的设计难度,提高了系统可靠性,所用到的方法对同类系统设计有一定的参考价值。     

介质阻挡放电对增升装置气动性能的影响

增升装置是传统构型飞机的重要组成部分,对飞行器气动性能有重要影响。将高效、简便、节能的介质阻挡放电(Dielectric Barrier Discharge,DBD)等离子体激励器布置在增升装置附近,通过对流场进行控制来达到提高增升装置气动性能的作用。选取二维翼型GAW-1及其29%襟翼作为研究对象,在分析基础流场的基础上,固定激励器放电频率等参数不变,将单级介质阻挡放电激励器放置在几个不同位置,用数值模拟的方法研究其对翼型总体气动特性的影响。仿真结果表明,主翼上表面后缘处的激励器增升效果最好,增升达12.8%且将失速迎角推迟约2°,主翼下表面后缘的升阻比增加可达15%。     

飞机空调组件温度控制软件的基本关系

以波音系列飞机空调系统为实例,在对现代化大型喷气客机空调冷却组件温度控制系统概况作出简要叙述的基础上,主要讨论温度控制信号的产生,重点分析各控制活门、控制软件的主要函数与逻辑关系,它是设计制造和维修的关键和核心问题。     

层流流动控制技术及应用

民机受到的摩阻占其总阻力很大比例,减少摩阻对改善民机性能和降低成本具有重要意义.层流摩阻远小于湍流摩阻,因此扩大层流区,甚至实现全层流流动是减阻的一个重要途径.为此,形成了包括自然层流流动、全层流流动和混合层流流动3种层流流动控制技术.本文从减阻分析,对3种层流流动控制技术的概念、方法、优缺点、可带来的效益,层流流动控...     

Next generation space avionics: layered system implementation

Advances in electronics over the past decade have produced major improvements in the power and flexibility of computer systems. Unfortunately current avionics systems for space applications typically have not leveraged these COTS advantages. A decade ago, the state-of-the-art for avionics systems made a step change to the Integrated Modular Avionics (IMA) used in the Boeing 777. This next generation avionics architecture is not based upon traditional Byzantine redundancy structures, but on a truth-based scheme where each element knows when an internal failure occurs and removes itself from the system. IMA utilizes a lock-step microprocessor design that communicates to a COTS Backplane for input/output, and to a Virtual Backplane/spl trade/ (a reliable high-speed serial bus) for intra-system communication. The system functions are implemented using a time and space partitioned operating system. The entire system provides the simplicity of a simplex system, implements the highest level of reliability providing complete flexibility to reconfigure both software applications and hardware interfaces, allows for rapid prototyping using low-cost COTS hardware, and is easily expandable beyond the initial point implementation. As the only 5/sup th/ generation avionics architecture, the concepts incorporated into Honeywell's IMA are ideally suited to be the backbone of the next generation Space Exploration Program avionics architectures.     

层流流动主/被动控制技术

摩擦阻力在民机总阻力中占很大比重,减少摩擦阻力对改善民机性能和实现绿色航空具有重要意义。层流摩擦阻力远小于湍流摩擦阻力,因此扩大层流区,甚至实现全层流流动,是减阻的一个重要途径。目前形成了自然层流流动、全层流流动和混合层流流动控制（HLFC）3种层流流动主动控制技术。本文基于减阻和流动不稳定分析,对3种控制技术的概念、方法、优缺点、可带来的效益和应用层流流动控制技术的飞机的设计方法及维护（包括预防昆虫和冰粒等污染的措施）等方面作了较为系统的阐述。概要地介绍了X21A、Jetstar、Boeing 757等飞机的HLFC飞行试验验证项目,结果表明了层流流动主动控制技术的有效性和困难性。本文也从原理到飞行试验较为系统地介绍了一种层流流动被动控制技术。     

大型低速翼型风洞侧壁边界层控制系统研制

介绍了NF-3大型低速翼型风洞多喷嘴级联吹气侧壁边界层控制系统的结构和原理。为验证本系统的功能和性能,采用侧壁吹气方案并使用增量式PID控制算法进行气源压力的控制,对具有增升装置的GAW-1翼型进行了侧壁边界层吹除试验研究。试验结果表明：（1）使用侧壁吹气系统后翼型模型中间截面最大升力系数由2．79增加到2．84,增加幅度1．8％,且模型端面截面的升力系数与中间截面的升力系数基本上相等;（2）利用增量式PID控制算法对气源压力的精确控制较好地完成了风洞侧壁吹气功能,改善了翼型表面流动,减小了侧壁边界层对翼型试验结果的影响。     

应用协同射流原理的旋翼翼型增升减阻试验研究

协同射流技术作为一种新型主动流动控制技术,是突破旋翼翼型高增升减阻设计的最有潜力的发展方向之一。以 OA312 旋翼翼型作为基准翼型,研制微型涵道风扇组为驱动的旋翼翼型 CFJ 风洞测力模型,开展基于前缘高负压零质量内循环协同射流原理的旋翼翼型高增升减阻低速风洞试验,研究吹气口大小、吸气口大小和上翼面下沉量等基础参数对增升减阻的影响规律,探讨 CFJ 旋翼翼型关键参数最佳取值。结果表明：与OA312 基准翼型相比,小攻角状态时,CFJ 旋翼翼型可显著降低阻力系数,甚至出现“负阻力”现象,实现了零升俯仰力矩基本不变;大攻角状态时,CFJ 旋翼翼型可显著提升最大升力系数和失速迎角,其中,最大升力系数可提升约 67.5%,失速迎角推迟了近 14.8°。     

电传操纵运输机操稳适航性问题分析

电传操纵系统已经成为民用运输类飞机操纵系统的主流.现行适航规章与操稳特性相关的要求主要是基于机械操纵飞机制定的,而电传操纵系统可以设计成与机械操纵不同的操纵性和稳定性,使得适航规章要求与电传操纵飞机之间存在不一致.对波音和空客公司的电传操纵系统操稳设计特征进行了分析,对与适航性密切相关的几个关键问题进行了对比研究,包括主操纵装置型式、响应类型、稳定性特征、大迎角保护、操纵品质评价以及飞行控制律需求捕获与确认等问题,为电传操纵运输机的设计与适航审定提供了借鉴.     

大型飞机后缘单缝襟翼空间机构设计方法与平台搭建

针对大型飞机总体技术要求和起飞着陆增升装置的设计要求,确定增升装置总体设计流程,详细介绍了后缘增升装置机构设计方法和平台,解决大型飞机后缘增升装置空间复杂机构的设计,以及后缘内外侧襟翼运动连续性和同步性问题。完成了后缘增升装置传动机构和收放机构在后梁上的布置,保证了收放机构的顺气流布置。     

Control in the cockpit: crews vs. computers

In the no-holds-barred competition between Boeing and Europe's Airbus Industrie for dominance in the world's commercial jet airliner markets, the question of who--or what--is in charge in the cockpit has been a significant selling point. Airbus, which pioneered highly automated flight controls with its A320 narrow-body transport in the late 1980s, likes to emphasize the "protection" features built into the aircraft through those automated systems. Boeing, which employs many of the same concepts in its new 777 twin-engine widebody transport, tends to put more emphasis on crew involvement in the operation of that aircraft. Is there a difference? In fact, the question has broader implications than those involving the marketing battle between Boeing and Airbus. Airlines, aircraft manufacturers, flight training specialists, human factors gurus, and aviation authorities in various countries are struggling with the isse as automation becomes more and more prevalent on passenger and cargo-carrying aircraft around the world.     

Lift enhancement based on virtual aerodynamic shape using a dual synthetic jet actuator

The Dual Synthetic Jet Actuator (DSJA) is used to develop a new type of lift enhancement device based on circulation control, and to control the flow over the two-dimensional (2D) NACA0015 airfoil. The lift enhancement device is composed of a DSJA and a rounded trailing edge (Coanda surface). The two outlets of the DSJA eject two jets (Jet 1 and Jet 2). Jet 1 ejects from the upper trailing edge, which increases the circulation of airfoil with the help of the Coanda surface. Jet 2 ejects from the lower trailing edge, which acts as a virtual flap. The Reynolds number based on the airfoil chord length and free flow velocity is 250000. The results indicate that the circulation control method based on Dual Synthetic Jet (DSJ) has good performance in lift enhancement, whose control effect is closely related to momentum coefficient and reduced frequency. With the increase of the reduced frequency, the control effect of the lift enhancement is slightly reduced. As the momentum coefficient increases, the control effect becomes better. When the angle of attack is greater than 4°, the increments of lift coefficients under the control of DSJ are larger than those under the control of the steady blowing at a same momentum coefficient. The maximum lift augmentation efficiency can reach 47 when the momentum coefficient is 0.02, which is higher than the value in the case with steady blowing jet circulation control.     

Excitation of instabilities in the wake of an airfoil by means of active winglets

Strong wake vortices that develop behind every aircraft as a byproduct of lift production pose a threat where aircraft fly in close staggering such as in the vicinity of airports. One approach to alleviate these vortex wakes is the use of high lift systems or control surfaces of the wing to create an unstable vortex system. The inherent instability of this vortex system shall then lead to an accelerated decay of the vortex wake, triggered for example by a periodic motion of the control surfaces. In the work presented here a simple wing model with winglets able to produce a vortex system of up to six distinct vortices is investigated in towing tank experiments. Theoretical studies show that these vortex systems potentially have a high degree of instability. By means of active oscillation of rudders integrated into the winglets, these vortex systems are to be excited to initiate an accelerated decay of the vortices. It is shown that configurations exist which exhibit strong instabilities, that lead to a significantly lower hazard level behind the vortex generating wing, even when not actively excited. However, an additional oscillation does not seem to accelerate decay of these vortex systems in relation to the statical reference case.