共查询到20条相似文献,搜索用时 421 毫秒
1.
针对航空发动机高、低压转速和压比控制回路,研究中考虑执行机构动态的高阶开环传递函数,根据推广到时滞系统的棱边定理,采用频域方法设计有参数不确定性的非精确模型的鲁棒PI控制器;并利用不确定范围内的发动机非线性模型构成的棱边系统和不确定系统族,验证了鲁棒控制器作用下的系统性能。仿真结果表明,该频域设计方法能使闭环系统的性能指标和鲁棒性均达标。 相似文献
2.
针对存在参数不确定性以及外部有界干扰的直连式三体旋转绳系卫星系统姿态跟踪控制问题,提出了一种分布式鲁棒最优控制方法。该方法首先针对单体绳系卫星姿态模型,在不考虑参数不确定性和干扰的条件下,应用Hamilton-Jacobi-Bellman方程设计了最优控制器;接着,考虑到实际系统存在参数不确定性和干扰,采用自适应与鲁棒误差积分方法在线学习参数不确定性和有界干扰,与最优控制器结合设计了鲁棒最优控制器,使闭环系统满足了性能指标达到最小的要求,并应用Lyapunov稳定性定理证明了其闭环系统的渐近稳定性。进一步考虑到绳系卫星系统的运动同步性,将单体绳系卫星姿态控制器设计扩展至直连式三体绳系卫星姿态系统,设计了分布式鲁棒最优控制器。最后在MATLAB/Simulink平台上进行了仿真,验证了方法的可行性与有效性,表明其具有潜在的应用前景。 相似文献
3.
研究了多变量鲁棒PI控制器实现系统稳定的设计方法,给出了鲁棒PI控制器存在的必要条件,并对PI控制器实现系统静态解耦进行了讨论。用该方法对某直升机飞行控制系统进行设计,给出了仿真结果 相似文献
4.
给出了一类非线性系统的鲁棒稳定性分析方法。通过对非线性系统的不同区域描述 ,将复杂的非线性问题转化为多个区间鲁棒稳定性问题。对区间鲁棒稳定性条件不等式进行变形 ,得到了该不等式可解的条件。此条件不仅大大简化了不等式 ,而且得到了新的鲁棒稳定性判据。进而 ,给出了非线性系统鲁棒反馈控制的设计方法。飞行控制器设计结果表明 ,本方法对不确定系统的分析和设计是有效的 相似文献
5.
给出了一类非线性系统的鲁棒稳定性分析方法。通过对非线性系统的不同区域描述,将复杂的非线性问题转化为多个区间鲁棒稳定性问题。对区间鲁棒稳定性条件不等式进行变形,得到了该不等式可解的条件。此条件不仅大大简化了不等式,而且得到了新的鲁棒稳定性判据。进而,给出了非线性系统鲁棒反馈控制的设计方法。飞行控制器设计结果表明,本方法对不确定系统的分析和设计是有效的。 相似文献
6.
主要研究中继卫星H∞回路成形姿态稳定控制问题。中继卫星具有弱阻尼的柔性模态频率和晃动模态频率,并且模态频率具有不确定性,同时系统增益也存在有较大的变化。首先利用拉格朗日方程建立了该卫星的动力学方程,描述了系统存在的结构不确定性,然后设计了H∞回路成形控制器。在设计过程中,首先提出了控制系统所需要满足的鲁棒稳定性和鲁棒性能指标;随后利用H∞回路成形理论设计了卫星的姿态稳定控制器,利用ν间隔度量方法对所设计的控制器进行了降阶处理,并且对所设计的控制器进行了鲁棒稳定性和鲁棒性能分析;最后通过数学仿真证明了所设计的控制器的有效性。 相似文献
7.
8.
H~∞方法在鲁棒飞控系统设计中的应用 总被引:1,自引:1,他引:0
首先介绍具有良好鲁棒稳定性和鲁棒性能的 H∞方法 ,然后综述几年来 H∞方法在鲁棒飞控系统设计中的应用研究 ,详细说明 H∞ 鲁棒飞控系统设计问题的形成和求解过程 ,并分析模型 /控制器降阶 ,结构不确定性和非结构不确定性的同时镇定 ,多模型设计等与 H∞方法相配合的设计技术的使用 相似文献
9.
基于二次稳定性准则,从可靠性这一新的角度考虑不确定系统的稳定性问题,提出了基于鲁棒可靠性的不确定系统鲁棒镇定控制器设计方法,将鲁棒控制器设计归结为基于可靠性的优化问题:以鲁棒可靠度为约束,极小化控制代价。依据该法设计的控制系统可满足稳定性意义上的鲁棒可靠性要求,并给出保证系统稳定性所要求的基本参数的最大鲁棒界限。适用于不确定参数的摄动范围准确已知和未知等情况。对F4E型战斗机的稳定控制器设计及对比研究表明了所提方法是实用、有效和可行的。 相似文献
10.
11.
12.
战斗机超机动飞行自抗扰控制器设计 总被引:1,自引:0,他引:1
提出了一种利用自抗扰控制器算法在大包线范围内设计超机动飞行控制系统的新方法。根据奇异摄动理论和自抗扰控制器能够动态补偿系统模型扰动和外扰的特性,在超机动飞行的快慢子回路中分别引入自抗扰控制器,实现了快变量和慢变量的动态解耦控制。控制律设计直接依据超机动飞行的强耦合、强非线性模型,在很大的包线范围内不需要改变控制器的结构和参数,大大简化了设计过程。大包线范围内的大迎角机动仿真结果表明,系统具有良好的动态和稳态性能,控制器具有很强的鲁棒性,为解决大包线范围内的超机动飞行控制问题提供了一种新的途径。 相似文献
13.
提出了一种改进的无人直升机H∞回路成形鲁棒控制器设计方法。首先将系统辨识技术引入到无人直升机高带宽控制器设计,根据飞行扫频数据,得到包含直升机动力学模型耦合特性的非参数频率响应,依据频率响应拟合待辨识模型得到无人直升机高精度的飞行动力学模型。然后根据该模型,采用改进的H∞回路成形方法设计了无人直升机内回路控制器,针对H∞回路成形方法中权值矩阵选取困难的问题,利用了最大右约数(GCRD)方法以实现实际系统和期望系统的传递函数矩阵之间的转换。与传统的对角型权值矩阵相比,使用此方法成形后的系统具有更宽的鲁棒稳定裕度,系统的解耦性和频带也显著提高,而且可以大大降低设计人员选取权值矩阵的复杂性和盲目性。通过仿真验证,所设计的无人直升机系统的飞行品质满足军用标准ADS-33E中一级区域的要求。 相似文献
14.
15.
16.
《中国航空学报》2015,(4)
The robust controller design problem for switched polytopic systems under asynchronous switching is addressed.These systems exist in many aviation applications, such as dynamical systems involving rapid variations.A switched polytopic system is established to describe the highly maneuverable technology vehicle within the full flight envelope and a robust dynamic output feedback control method is designed for the switched polytopic system.Combining the Lyapunov-like function method and the average dwell time method, a sufficient condition is derived for the switched polytopic system with asynchronous switching and data dropout to be globally,uniformly and asymptotically stable in terms of linear matrix inequality.The robust dynamic output feedback controller is then applied to the highly maneuverable technology vehicle to illustrate the effectiveness of the proposed approach.The simulation results show that the angle of attack tracking performance is acceptable over the time history and the control surface responses are all satisfying along the full flight trajectory. 相似文献
17.
18.
本文提出一种改进自动驾驶仪性能的方案。在导弹自动驾驶仪原回路的基础上增加Robust控制器,这种方案可提高驾驶仪对参数变化的Robust性能。本文详细叙述了Robust控制器结合自动驾驶仪的设计方法,并用仿真结果说明了Robust控制器在本算例中所起的作用。 相似文献
19.
《中国航空学报》2020,33(10):2679-2693
In recent years, the Active Flutter Suppression (AFS) employing Linear Parameter-Varying (LPV) framework has become a hot spot in the research field. Nevertheless, the flutter suppression technique is facing two severe challenges. On the one hand, due to the fatal risk of flight test near critical airspeed, it is hard to obtain the accurate mathematical model of the aeroelastic system from the testing data. On the other hand, saturation of the actuator may degrade the closed-loop performance, which was often neglected in the past work. To tackle these two problems, a new active controller design procedure is proposed to suppress flutter in this paper. Firstly, with the aid of LPV model order reduction method and State-space Model Interpolation of Local Estimates (SMILE) technique, a set of high-fidelity Linear Time-Invariant (LTI) models which are usually derived from flight tests at different subcritical airspeeds are reduced and interpolated to construct an LPV model of an aeroelastic system. And then, the unstable aeroelastic dynamics beyond critical airspeed are ‘predicted’ by extrapolating the resulting LPV model. Secondly, based on the control-oriented LPV model, an AFS controller in LPV framework which is composed of a nominal LPV controller and an LPV anti-windup compensator is designed to suppress the aeroelastic vibration and overcome the performance degradation caused by actuator saturation. Although the nominal LPV controller may have superior performance in linear simulation in which the saturation effect is ignored, the results of the numerical simulations show that the nominal LPV controller fails to suppress the Body Freedom Flutter (BFF) when encountering the actuator saturation. However, the LPV anti-windup compensator not only enhances the nominal controller’s performance but also helps the nominal controller to stabilize the unstable aeroelastic system when encountering serious actuator saturation. 相似文献