机载火警探测系统的改进研究

针对目前飞机货舱火警探测系统误报率高等问题,本文提出研究一种基于模糊信息融合理论的飞机货舱火警探测系统,同时利用温度传感器、一氧化碳传感器、红外烟雾传感器测试飞机货舱火警探测标的物,并将3种传感器所获得的温度、一氧化碳浓度、烟雾浓度参数信息进行模糊融合运算和决策处理,实现飞机货舱火警早期预报.验证结果表明,基于模糊信息...     

多传感器飞机火警探测系统研究

针对目前飞机火警预警系统虚警高的问题,提出了一种多传感器综合判断的机载火警探测系统,并利用烟雾探测器、温度传感器和火焰探测器三种传感器进行信息采集粗糙集理论进行探测信号处理,给出可靠的火警报警信号。从实验仿真结果来看,该探测系统比单一烟雾探测器的火警探测系统的火警识别准确度明显提高。     

航空电瓶温度传感器校验仪的研制

提出了将半导体制冷制热技术用于航空电瓶温度传感器校验的新设想。采用单片机技术并通过运用模糊-PID控制方法实现校验过程中的恒温控制。实验结果表明,该校验仪能够全自动地检测出电瓶温度传感器在各恒温点的动作情况,并且具有较高的温度检测精度和稳定性。     

民用发动机短舱火警探测器温度特性地面试验研究

基于某飞机发动机舱火警探测系统温度测量的机上地面试验,分析了外界大气温度、发动机状态、发动机滑油量、发动机引气和发电等功能对火警探测器环境温度的影响,提出发动机舱火警探测器温度测量试验方法,为民用飞机防火系统的适航取证试验提供了试验方法和参考依据。     

精密模具叶片校验仪的校准方法及不确定度评定

由主标准器0.5～100 mm 三等量块、标准四方直角尺配套装置千分表等组成的标准装置,主要用于开展对精密模具叶片校验仪的校准.本文介绍了该装置对精密模具叶片校验仪的校准方法及相应的不确定度评定.     

基于BP神经网络算法的飞机发动机火警信号系统研究

针对某型飞机发动机火警探测系统存在误报率较高的问题,设计了基于BP神经网络算法的飞机发动机火警信号系统,采用了速率检测算法结合绝对温度的局部决策机制,构建了3层数据融合结构,进行了仿真验证.证明此种方法对解决发动机报警灵敏度和误报率之间的矛盾,具有较高的价值.     

机载火警探测系统的改进研究

目前民航飞机货舱火警探测器普遍采用红外光电感烟器,存在响应慢和误报率高的缺陷.文中引入火灾发生早期出现的一氧化碳气体浓度/浓度变化量作为新的火警探测标志量,设计了烟气复合火警探头.提出了两维输入复合偏置滤波自动火警报警算法,设计了火警报警阈值调节模糊系统,根据烟雾浓度变化量和一氧化碳气体浓度变化量等动态参量,智能调整火警报警阈值,拟解决货舱单一使用红外光电感烟火警探测器误报率高和响应慢的问题.模拟实验结果表明:新研制的烟气复合火警探测器比现有的红外光电感烟探测器有更低的火警误报率和更快的响应速度.     

400Hz电流互感器校验仪的检定

介绍了用功率源法与分流法相结合对电流互感器校验仪进行检定的方法，并给出了检定结果的不确定度。该方法已应用于新研制的400Hz电流互感校验仪的检定，对于工频的电流互感器校验仪的检定也有一定的参考价值。     

焊接残余应力超声无损检测技术

基于声弹性理论,针对天然气输送管道焊缝残余应力检测问题,本文提出了一种检测新技术,并研制残余应力超声检测系统。该系统采用一发一收的探头分布方式,传感器沿着管道直焊缝放置,传感器吸附于管道外壁并在管道表面及亚表面激发出临界折射纵波,测得管道外壁沿着直焊缝处的焊接残余应力分布情况,并且经过实验验证该系统对管道焊接残余应力测量的可靠性。针对温度变化较大环境下的曲面材料的残余应力检测问题,提出了温度补偿技术和曲率补偿技术。     

多传感器融合技术在镁合金激光焊接质量检测中的应用

将多传感器融合技术应用于镁合金激光焊接质量检测系统,进行了基于D-S证据理论的检测数据融合,构建了识别框架及基本信度函数,阐述了证据组合与决策规则以及质量测度的概念,并对基本算法进行了描述.试验验证了由多传感器获得的温度信息包含焊缝质量特征,对在焊接过程中焊缝附近几点采集的温度数据进行处理完全可以综合评定焊接质量.     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

ν-gap度量及其在飞行控制律评估中的应用

 传统控制律评估方法主要用于单输入单输出（SISO）系统，且对模型参数摄动考虑不够全面,针对这些不足，研究了ν-gap度量方法。在介绍系统广义稳定裕度相关概念的基础上，给出了ν-gap度量的定义、特点和性质以及近似摄动模型的计算，提出ν-gap度量评估控制律的步骤。实例结果表明，该方法不仅克服了上述传统评估方法的缺陷，而且还有根据所求的各摄动影响情况忽略影响小的元素，以减少计算量及可以找到最坏情况下的参数摄动组合等优点。     

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Integrated Entry Guidance for Reusable Launch Vehicle

A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method.     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。