两种GPS广播星历参数算法的比较

介绍了新GPS广播星历参数,分析了新旧GPS广播星历参数及其用户算法的区别,导出了卫星位置矢量对新GPS广播星历参数的偏导数,并与旧GPS广播星历参数偏导数进行了简要的比较分析.计算结果表明,两种GPS广播星历参数算法都能很好地描述MEO卫星的轨道特性,且广播星历参数拟合算法的精度损失仅为数厘米.      

导航卫星广播星历误差特性频域分析及预报模型

广播星历误差是影响卫星导航用户定位精度的重要因素之一。文章以GPS为例,应用误差频谱分析方法对GPS广播星历在频域内的误差特性进行分析,利用频谱分析模型及其与AR的混合模型对星历误差进行预报。分析结果表明,GPS广播星历具有明显的周期变化;频谱分析模型可以发现星历误差的主要周期变化,但预报精度不高;频谱分析和AR混合模型预报精度较高,经过误差补偿后,广播星历精度在0.5m以内(1σ)。     

混合星座导航卫星广播星历相关问题研究

GPS卫星广播星历参数具有参数少、物理意义明确以及精度高等特点,可以考虑将它应用于包含MEO、IGSO和GEO卫星的混合星座卫星导航系统。分析了采用GPs卫星广播星历参数时MEO、IGSO和GEO卫星的广播星历拟合精度,并且比较分析了在一个卫星的轨道周期内,广播星历参数拟合结果的变化规律。仿真结果表明,MEO、IGSO和GEO卫星的广播星历拟合误差最大在分米量级;MEO和IGSO卫星在一个轨道周期内星历参数拟合结果的变化规律相近,但是与GEO卫星的差异较大。     

GPS导航电文参数表示的测距误差分析

针对在GPS现代化进程中将出现的新的CNAV/CNAV-2导航电文格式,比较了目前发播的GPS NAV导航电文与新电文在数据表达方式上的差别.为了衡量不同的数据截断方式对于导航定位的影响,引用导航数据截断测距误差的概念进行分析.利用实际的导航数据对于两种电文结构进行了仿真生成、处理,比较星历/星钟参数截断带来的测距误差影响.结果表明:相比于NAV电文,CNAV/CNAV-2由于截断所造成的测距误差更小,NAV电文对截断误差更敏感.其中星历参数截断的测距误差改善可达厘米级,星钟参数截断的测距误差改善可达分米级.因此,在带宽有限的条件下应优先考虑提高星钟参数的表示精度.改进星钟参数的表达形式可望获得更高的精度提升.     

基于位置观测的北斗广播星历速度精度分析

利用广播星历计算导航卫星的速度向量是GNSS高精度实时测速的必要条件.本文分析了仅以卫星位置向量为观测量的北斗广播星历的速度计算精度.从广播星历拟合过程出发,推导了北斗18参数模型的速度向量计算公式.基于北斗13颗在轨卫星一年的实际轨道数据,分析了全年广播星历计算卫星速度向量的精度.结果表明,利用18参数模型计算的速度误差最大在10-4m·-1量级;在相同拟合时段条件下,地球静止轨道（GEO）和倾斜地球同步轨道（IGSO）卫星的速度精度相当,高于中圆地球轨道（MEO）卫星.通过对位置残差序列分析,得出位置残差误差较小且变化趋势平稳是广播星历计算速度精度较高的原因.分析和计算结果验证了仅用位置观测量拟合北斗广播星历算法的有效性.      

基于实时SSR数据的LEO卫星精密单点定位研究

对目前低轨卫星实时定位的方法进行了研究,现在通常采用GPS定位,使用广播星历和普通晶振,实时定位精度一般在10m以内,不能满足高精度实时定位的需求。IGS组织在全球范围内对GPS跟踪分析,生成精密星历、精密钟差产品、按SSR格式的广播星历和钟差修正产品并在网上发布。对这些IGS产品进行了调查,提出在现有测控支持情况下,可以通过高密度上注SSR信息流实现在轨高精度定位。以某型号低轨微小卫星在轨导航增强载荷为应用背景,用IGS03产品中的1057和1058数据对双频GPS接收机的星历和钟差进行修正,采用递推最小二乘估计和LAMDA模糊度固定过对载波相位和伪距信息进行处理,在短时间内获得亚米级定位结果。     

基于电推力器进行南北位置保持的一种地球同步轨道注入参数方法

摘要： 电推力器在静止轨道卫星上应用越来越广泛,特别是基于电推力器进行南北位置保持,可以有效节省推进剂.提出改进的GPS星历参数解析算法,在此基础上考虑包含电推力模型在内多摄动项模型进行地面精密轨道计算,采用微分修正法,提出一种地球同步轨道注入参数方法,该方法可应用于星上自主完成基于电推力器的南北位置保持.仿真算例表明使用该方法得到的轨道注入参数,卫星能够在保证姿态确定精度的同时,完成南北位置保持任务.     

GEO卫星广播星历的拟合参数设计

基于第一类无奇点要素的拟合参数和5°倾角旋转法,可以实现GEO发播电文与MEO和IGSO的电文一致性,但是没有完全避免数学奇异性.文章从无奇点要素的选取和主要摄动力的影响分析两方面出发,提出了一套16参数的GEO星历表示法.首先,利用同步要素描述卫星的星下点运动轨迹;其次,摄动参数中顾及了地球引力位田谐项引起的定点漂移.拟合试验表明,2h星历拟合的用户距离误差的均方根优于0.01m.     

高动态GPS卫星信号模拟器导航电文生成

为了测试全球定位系统GPS(Global Positioning System)接收机的性能,应用GPS信号模拟器来模拟各种条件下真实的GPS信号.GPS卫星信号发生器由硬件、计算机和软件组成.软件主要由卫星导航参数计算模块、目标运动轨迹计算模块、误差计算模块等模块组成.导航电文产生功能模块是高动态GPS卫星信号模拟器要解决的一项关键技术.给出了3个卫星星钟改正参数的物理意义和星历产生模型,根据这些参数并结合相应的时间参数来形成卫星导航电文.通过程序仿真并与导航电文进行验证,证明推导出的星历产生模型基本符合GPS星的星座排列规律.     

Klobuchar模型的实用分析与改进

电离层延迟误差是无线电信号传播中不可忽视的误差源.GPS特许用户利用双频接收机的双频观测值直接对电离层延迟进行实时测定,其所得结果精度很高.多数普通用户所使用的单频接收机依靠电离层模型对其进行误差修正,效果不很理想.本文通过WUHN观测站双频接收机10天的实测数据对GPS广播星历采用的Klobuchar模型进行了验证,其结果与前人论述相一致.此外,经由反映太阳活动强度的太阳相对黑子数对Klobuchar模型提出了新的改进方法.实验数据结果表明,该方法对此模型修正效果有大幅提升,对原模型修正效果>50%的修正率由60%左右提升至85%以上,>80%的修正率由10%左右提升至40%以上.在实际应用中单频接收机用户可以参考本文改进方法对Klobuchar模型进行修正.      

Performance assessment of real-time orbit determination for the Haiyang-2D using onboard BDS-3/GPS observations

The Global Navigation Satellite System (GNSS) receivers equipped on the Haiyang-2D (HY-2D) satellite is capable of tracking the signals of both the third generation of BeiDou satellite navigation System (BDS-3) and the Global Positioning System (GPS), which make it feasible to assess the performance of real-time orbit determination (RTOD) for the HY-2D using onboard GNSS observations. In this study, the achievable accuracy and convergence time of RTOD for the HY-2D using onboard BDS-3 and GPS observations are analyzed. Benefiting from the binary-offset-carrier (BOC) modulation, the BDS-3 C1X signal includes less noise than the GPS C1C signal, which has the same signal frequency and chipping rate. The root mean squares (RMS) of the noises of C1X and C1C code measurements are 0.579 m and 1.636 m, respectively. Thanks to a ten-times higher chipping rate, the code measurements of BDS-3 C5P, GPS C1W and C2W are less noisy. The RMS of code noises of BDS-3 C5P, GPS C1W, and C2W are 0.044 m, 0.386 m, and 0.272 m, respectively. For the HY-2D orbit, the three-dimensional (3D) and radial accuracies can reach 31.8 cm and 7.5 cm with only BDS-3 observations, around 50 % better than the corresponding accuracies with GPS. Better performance of the BDS-3 in RTOD for the HY-2D is attributed to the high quality of its broadcast ephemeris. When random parameters are used to absorb ephemeris errors, substantial improvement is seen in the accuracy of HY-2D orbit with either BDS-3 or GPS. The 3D RMS of HY-2D orbit errors with BDS-3 and GPS are enhanced to 23.1 cm and 33.6 cm, and the RMS of the radial components are improved to 6.1 cm and 13.3 cm, respectively. The convergence time is 41.6 and 75.5 min for the RTOD with BDS-3 and GPS, while it is reduced to 39.2 and 27.4 min after the broadcast ephemeris errors are absorbed by random parameters. Overall, the achievable accuracy of RTOD with BDS-3 reaches decimeter level, which is even better than that with GPS, making real-time navigation using onboard BDS-3 observations a feasible choice for future remote sensing missions.     

Autonomous broadcast ephemeris improvement for GNSS using inter-satellite ranging measurements

This paper discusses the concept of using inter-satellite ranging (ISR) measurements of the satellites of a Global Navigation Satellite System (GNSS) for autonomous broadcast ephemeris improvement. Firstly the inter-satellite ranging is modeled to obtain the clock and orbit error observables. The orbit error observable is analyzed and its observation equation is provided. Both least-squares estimation and Kalman Filter approach are proposed to estimate satellite clock errors, while solely the Kalman Filter is used to estimate the orbit errors. All these algorithms are validated using true broadcast ephemeris and precise ephemeris of GPS along with the simulated ranging noise. Based on the settings adopted in the test, the result shows that the orbit accuracy of the precise ephemeris using the proposed method is around 20–50 cm and the accuracy of the satellite clock can reach 20 cm while ranging noise is assumed to be 0.45 m (1σ). The User Ranging Error (URE) is improved from 1.05 m to 0.34 m, which is comparable to other sources of precise ephemeris or even better, while the proposed approach has many advantages such as compatibility and accessibility. It is also noted that the proposed method may provide useful functions in determining inter-constellation coordinate and time differences autonomously for better interoperability and interchangeability in the multi GNSS operation era.     

附加先验轨道约束的LEO几何法实时精密定轨验证分析

低轨卫星的实时精密定轨能够极大拓展其完成复杂科学任务的能力,例如实时环境监测、机动控制和卫星自主导航等.本文根据几何法实时精密定轨模型,提出了附加LEO先验轨道约束从而改善实时定轨的精度、收敛速度和稳定性的构想.分别采用广播星历、超快速星历预报部分和实时精密星历,设计了6种实时定轨方案,并利用Swarm-A,B,C星7天的观测数据进行方案验证与分析.结果表明,使用广播星历、IGU和IGC星历的方案精度递增,附加先验轨道约束能够进一步提升精度.使用IGC星历并附加标准差为1m的先验轨道约束后,在径向、切向和法向的定轨精度分别达到6.12cm,5.55cm和4.98cm.此外,附加先验轨道约束能够显著提升收敛速度,使用IGC星历平均收敛时间约为31min,附加标准差为1m的先验轨道约束后收敛仅需约4min.      

Compatibility of Terrestrial Reference Frames used in GNSS broadcast messages during an 8 week period of 2019

The operational Terrestrial Reference Frames (TRFs) realized through the evaluation of broadcast ephemerides for GPS, GLONASS, Galileo, BeiDou-2 and BeiDou-3 have been compared to IGS14, the TRF realized by the International GNSS Service (IGS). The TRFs realized by the GPS, GLONASS, Galileo, and BeiDou-2 and BeiDou-3 broadcast ephemerides are the orbital realizations of WGS 84 (G1762′), PZ90.11, GTRF19v01, and BDCS respectively. These TRFs are compared using up to 56 days of data (21 July-14 Sept 2019) at a 5 or 15-min rate. The operational TRFs are compared to IGS14 in a 7-parameter similarity (Helmert) transformation. Numerical results show that the operational GNSS TRFs differ from IGS14 at a level no greater than 4 cm for Galileo, 6 cm for GPS and BeiDou-3, 13 cm for GLONASS, and 48 cm for a limited set of BeiDou-2 Medium Earth Orbit (MEO) vehicles.     

Precise coseismic displacements from the GPS variometric approach using different precise products: Application to the 2008 MW 7.9 Wenchuan earthquake

The Global Positioning System (GPS) variometric approach has emerged as an attractive alternative to traditional well-developed positioning techniques including relative positioning and precise point positioning. Previous studies have demonstrated the capability of the variometric approach to retrieve coseismic displacements at centimeter-level precision, in a real-time manner using only readily available broadcast ephemeris. This study presents the first results comparing the performance of the variometric approach by using a variety of precise satellite orbit and clock products. Totally six kinds of products are included in our evaluation, namely the broadcast, IGS (International GNSS Service) ultra-rapid (predicted), ultra-rapid (observed), rapid, final (30-s clock) and CODE (Center for Orbit Determination in Europe) final (5-s clock) products. Static and dynamic experiments are conducted using 1-Hz GPS data covering a relatively large area in China during the 2008 Wenchuan M_W 7.9 earthquake. After removing the linear trend, the displacements using broadcast, ultra-rapid (predicted), ultra-rapid (observed) and rapid products reach nearly equivalent precisions at centimeter level. By using final and CODE final products, the precision of displacements can be significantly improved from 1.9–2.0 cm to 0.4–0.7 cm horizontally, and from 6.0–6.2 cm to 1.0–1.7 cm vertically for the dynamic experiments. The displacements using the CODE final products achieve the best precision, improved by more than 40% compared to those using the IGS final products. With the availability of IGS high-rate real-time precise products, this approach is promising to capture coseismic displacements more precisely in real time, which is crucial for earthquake and tsunami early warning.