自适应设计空间扩展的高效代理模型气动优化设计方法

对基于Kriging模型气动优化的加点方法和设计空间的构建问题进行了研究。首先,针对高效全局优化（EGO）方法收敛缓慢的问题,提出了一种混合加点方法,该方法通过引入期望提高（EI）阈值控制EI和最小预测值（MP）加点准则,利用先全局再局部的优化思想,提高了EGO方法在确定设计空间内的收敛性。其次,针对设计空间的构建问题,对比了扩大设计变量范围和多轮优化两种不同的设计空间构建方法,分析了设计变量范围对设计空间大小和样本密度的影响,进而提出了自适应设计空间扩展的代理模型优化方法。相对于传统固定设计空间的方法,自适应设计空间扩展的方法在动态的设计空间中进行优化搜索,只在有潜力的维度扩展设计变量范围,通过构建自适应设计空间,实现了样本的高效配置。最后,通过ADODG标准翼型优化算例证实,自适应设计空间优化方法可以大幅提高气动优化设计效率。     

一种适用于气动优化的高效自适应全局优化方法

随着设计空间的增大和优化问题非线性程度的提高，基于代理模型的优化（SBO）过程收敛越来越慢，并且在局部勘测上呈现不足。本文发展了一种高效自适应全局优化方法，在整个样本细化迭代过程中采用变设计空间取样：即在每一步样本细化迭代过程中，利用当前设计空间中的样本建立代理模型，并且根据样本的内部特征，利用模糊聚类算法将该设计空间分割成几个子空间，然后在每个子空间内通过最大化目标函数的期望提高函数和最小化模型预测目标来增加新的样本，之后对子空间进行融合更新设计空间。6个解析测试算例的结果表明，所发展的方法相比于一般的代理模型优化方法，具有更好的鲁棒性以及全局探索和局部勘测能力，更适用于具有强非线性和多极值的优化问题。RAE2822气动优化实例表明，所发展的方法在处理工程实际问题时，仍然能够保持很好的效率、鲁棒性和自适应性。     

Adaptive optimization methodology based on Kriging modeling and a trust region method

Surrogate-Based Optimization (SBO) is becoming increasingly popular since it can remarkably reduce the computational cost for design optimizations based on high-fidelity and expensive numerical analyses. However, for complicated optimization problems with a large design space, many design variables, and strong nonlinearity, SBO converges slowly and shows imperfection in local exploitation. This paper proposes a trust region method within the framework of an SBO process based on the Kriging model. In each refinement cycle, new samples are selected by a certain design of experiment method within a variable design space, which is sequentially updated by the trust region method. A multi-dimensional trust-region radius is proposed to improve the adaptability of the developed methodology. Further, the scale factor and the limit factor of the trust region are studied to evaluate their effects on the optimization process. Thereafter, different SBO methods using error-based exploration, prediction-based exploitation, refinement based on the expected improvement function, a hybrid refinement strategy, and the developed trust-region-based refinement are utilized in four analytical tests. Further, the developed optimization methodology is employed in the drag minimization of an RAE2822 airfoil. Results indicate that it has better robustness and local exploitation capability in comparison with those of other SBO methods.     

Multi-infill strategy for kriging models used in variable fidelity optimization

In this paper, a computationally efficient optimization method for aerodynamic design has been developed. The low-fidelity model and the multi-infill strategy are utilized in this approach. Low-fidelity data is employed to provide a good global trend for model prediction, and multiple sample points chosen by different infill criteria in each updating cycle are used to enhance the exploitation and exploration ability of the optimization approach. Take the advantages of low-fidelity model and the multi-infill strategy, and no initial sample for the high-fidelity model is needed. This approach is applied to an airfoil design case and a high-dimensional wing design case. It saves a large number of high-fidelity function evaluations for initial model construction. What’s more, faster reduction of an aerodynamic function is achieved, when compared to ordinary kriging using the multi-infill strategy and variable-fidelity model using single infill criterion. The results indicate that the developed approach has a promising application to efficient aerodynamic design when high-fidelity analyses are involved.     

综合时序信息的试验优化设计及稀疏求解

考虑不同试验点的试验成本及试验时序信息,在性能指标与影响因素间的响应模型未知情况下,利用装备系统的先验信息构造模型驱动的基函数,构造相应的回归模型来刻画系统的内在关系,分析不同试验点成本及试验时序对试验方案的影响。定义了一种考虑空间权重及批序贯时序的非均匀最优设计模型,将稀疏理论引入到回归试验设计中,把不同批次试验下的回归试验设计模型参数估计问题转换为结构化稀疏重构问题,讨论了非均匀最优设计的构造定理,提出结构化稀疏参数求解算法。算例表明:利用本方法生成的试验点考虑了试验点空间权重和试验时序信息,更符合实际试验规程;采用本方法获得的响应函数得到的期望预测误差更小。     

基于改进无模型自适应算法的涡扇发动机限制保护控制方法

针对发动机限制保护控制问题,提出了一种基于数据驱动的改进无模型自适应限制保护控制方法。以主回路闭环系统为设计对象,通过在常规无模型自适应控制律的准则函数中增加误差变化率,使超限保护系统具有更快的响应速度,给出了改进后系统的稳定性条件,并采用临界比例度法进行了控制器参数整定。仿真结果表明:在不同工作点,所设计的改进无模型自适应限制保护控制器相比常规无模型自适应限制保护控制器,最大超限平均减小2.97%,响应时间平均缩短2.30s,实现了发动机超限后的迅速回调,保证了发动机系统的安全运行。     

基于Kriging代理模型的约束差分进化算法

广泛应用的高精度分析模型使得飞行器设计优化的计算成本不断增加,为了缩短优化耗时,基于代理模型的进化算法（SAEAs）近年来得到了广泛关注。针对现有SAEAs处理约束优化问题优化效率低下的缺陷,提出了一种基于Kriging代理模型的约束差分进化算法（KRG-CDE）,结合约束改善概率与最优适应度定制了一种改进的可行准则,从而提高新增样本点的潜在可行性与最优性,并根据种群改善情况,平衡算法全局探索与局部搜索性能。标准测试算例对比研究结果表明,相比于基于全局与局部代理模型的差分进化算法、（μ+λ）-约束差分进化算法,KRG-CDE算法在优化效率、全局收敛性及鲁棒性等方面具有显著优势。最后,运用KRG-CDE算法求解全电推卫星多学科设计优化问题,验证了该算法的工程实用性。     

制导精度一体化试验的Bayesian样本量计算方法

针对制导精度一体化试验的样本量计算(SSD)问题,分析了应用经典样本量计算方法和标准幂先验的Bayesian样本量计算方法存在的问题和矛盾;为了解决验前样本量很大时,基于标准幂先验得到的设计先验与Bayesian平均后验方差准则之间的矛盾,综合考虑仿真可信度与验前样本量的影响,提出了试验的设计效应指标,给出一种基于试验的设计效应等价确定修正幂先验指数的方法,并用于构造Bayesian样本量计算的设计先验;以兴趣参数Bayesian估计的平均后验方差为输出精度,分别设计了在试验经费约束和评估精度要求约束下的一体化试验方案样本量优化计算方程,并通过示例分析证明了所提Bayesian样本量计算方法的有效性。     

An adaptive turbo-shaft engine modeling method based on PS and MRR-LSSVR algorithms

In order to establish an adaptive turbo-shaft engine model with high accuracy, a new modeling method based on parameter selection (PS) algorithm and multi-input multi-output recursive reduced least square support vector regression (MRR-LSSVR) machine is proposed. Firstly, the PS algorithm is designed to choose the most reasonable inputs of the adaptive module. During this process, a wrapper criterion based on least square support vector regression (LSSVR) machine is adopted, which can not only reduce computational complexity but also enhance generalization performance. Secondly, with the input variables determined by the PS algorithm, a mapping model of engine parameter estimation is trained off-line using MRR-LSSVR, which has a satisfying accuracy within 5&. Finally, based on a numerical simulation platform of an integrated helicopter/ turbo-shaft engine system, an adaptive turbo-shaft engine model is developed and tested in a certain flight envelope. Under the condition of single or multiple engine components being degraded, many simulation experiments are carried out, and the simulation results show the effectiveness and validity of the proposed adaptive modeling method.     

含局部非线性的月球探测器软着陆动力学模型降阶分析

为准确预估探测器着陆冲击过程的动力学响应,采用非线性有限元方法建立了探测器软着陆动力学模型,能够较全面地反映出各种非线性因素。针对非线性有限元求解耗时长的弱点,考虑到探测器的局部非线性特性,利用广义动力缩聚（GDR）方法建立了月球探测器中心体的降阶模型。提出了一种基于脉冲响应函数的模态截断准则,在广义动力缩聚方法的基础上筛选少数几阶模态影响系数（MIC）较高的模态表征中心体的加速度响应,能够进一步降低模型的阶数。将降阶的中心体模型与含非线性的缓冲机构连接后进行的软着陆动力学分析能够准确而快速地预估探测器测点的加速度响应,与非降阶模型对比,计算时间缩短了75.5%,加速度响应的相对峰值误差控制在5%以内。数值仿真表明,广义动力缩聚方法能够有效地解决传统非线性有限元方法求解效率低的问题,本文所提模态截断准则的优点是适于求解模态密集问题并且与系统的输入输出无关。     

应用保护映射理论的高超声速飞行器自适应控制律设计

针对高超声速飞行器包线范围广、参数变化大的控制需求,应用保护映射理论提出一种高超声速飞行器的自适应控制律设计方法。首先建立整个飞行包线内的线性变参数(LPV)模型,在参数变化边界点设计一个初始的控制结构和参数,然后基于保护映射理论分析初始控制结构使闭环系统稳定的参数范围,通过迭代自动获取整个包线内满足性能指标的控制参数,进而通过多项式拟合设计出高超声速飞行器自适应控制律。所提出的方法能够根据初始控制结构自动寻找一系列满足性能要求的控制器参数,并确定这些控制参数满足闭环系统稳定的设计范围。仿真结果表明,所设计的自适应控制律能够确保高超声速飞行器大包线的设计要求,实现闭环系统的鲁棒稳定。     

Experimental study in adaptive tracking control

The authors describe an experimental study of adaptive pointing and tracking control for flexible spacecraft conducted on a complex ground experiment facility. The algorithm used is based on a multivariable direct model reference adaptive control law. Several experimental validation studies performed using this algorithm for vibration damping and robust regulation are extended by addressing the pointing and tracking problem. As is consistent with an adaptive control framework, the plant is assumed to be poorly known to the extent that only system level knowledge of its dynamics is available. Explicit bounds on the steady-state pointing error are derived as functions of the adaptive controller design parameters. It is shown that good tracking performance can be achieved in an experimental setting by adjusting adaptive controller design weightings according to the guidelines indicated by the analytical expressions for the error     

Modified input estimation technique using pseudoresiduals

An adaptive tracking filter for maneuvering targets is proposed using modified input estimation technique. Pseudoresiduals are defined using measurements and the velocity estimate at the hypothesized maneuver onset time. With the pseudoresiduals and a new target model representing transitions of nominal accelerations, a new input estimation method for tracking a maneuvering target is derived. Since the proposed detection technique is more sensitive to maneuvers than previous work, the shorter window length can be employed to detect and compensate target maneuvers. Also shown is that the tracking performance of the proposed filter is similar to that of interacting multiple model method (IMM) with 3 models, while computational loads of our method are drastically reduced     

Static Frame Model Validation with Small Samples Solution Using Improved Kernel Density Estimation and Confidence Level Method

An improved method using kernel density estimation (KDE) and confidence level is presented for model validation with small samples. Decision making is a challenging problem because of input uncertainty and only small samples can be used due to the high costs of experimental measurements. However, model validation provides more confidence for decision makers when improving prediction accuracy at the same time. The confidence level method is introduced and the optimum sample variance is determined using a new method in kernel density estimation to increase the credibility of model validation. As a numerical example, the static frame model validation challenge problem presented by Sandia National Laboratories has been chosen. The optimum bandwidth is selected in kernel density estimation in order to build the probability model based on the calibration data. The model assessment is achieved using validation and accreditation experimental data respectively based on the probability model. Finally, the target structure prediction is performed using validated model, which are consistent with the results obtained by other researchers. The results demonstrate that the method using the improved confidence level and kernel density estimation is an effective approach to solve the model validation problem with small samples.     

基于Kriging模型梯度解析解的改进一次二阶矩方法

改进一次二阶矩（AFOSM）法是一种基于功能函数梯度的结构可靠性分析方法,鉴于其对隐式函数的梯度较难求解,提出了一种基于Kriging模型梯度解析解的AFOSM方法,利用Kriging代理模型的解析表达式推导得到功能函数对输入变量的梯度解析解,为AFOSM中设计点的确定提供高精度的梯度信息。通过Kriging与AFOSM的结合,很好地解决了基于有限元模型的隐式情况下梯度计算量相当大、可靠性分析难的问题。数值与工程算例验证了所提Kriging梯度解析解的较高精确性,同时验证了所提基于Kriging解析解的AFOSM结构可靠性分析方法的正确性与较高精度。     

不确定航空发动机分布式控制系统自适应滑模控制

针对存在参数摄动、外部干扰的航空发动机不确定性分布式控制系统,在系统具有时变输入时延和干扰上界未知的情况下,设计了具有鲁棒性能的自适应滑模控制器。基于预测控制和矩阵奇异值理论,对初始的发动机离散分布式模型进行等效线性变换,得到不显含时延项的规范形系统模型,便于进行滑模面参数的求解;在给定的H∞指标下,推导了滑模运动在非匹配不确定性作用下渐进稳定的充分条件,给出了线性矩阵不等式(LMI)形式的滑模面参数设计方法;最后,设计对干扰具有估计功能的自适应率,在此基础上提出自适应滑模控制器。仿真结果表明:所设计的控制器能够有效降低外部干扰对系统动态性能的影响,在所考虑的不确定性因素作用下,系统的滑模运动具有理想的H∞性能。当外部干扰强度变化时,控制器的鲁棒性较好,状态收敛时间小于0.8s,且不存在抖振。      

测量电视的自动调焦系统实现

自动调焦系统是保证测量电视获得被测目标清晰图像的一个关键部分,快速有效地实现自动调焦,有助于提高整个系统的性能。本论文提出了一种基于图像处理技术的自动调焦方法,采用Sobel边缘检测算子来检测图像的边缘点数,并根据该值判断是否聚焦,同时采用自适应搜索步长的登山算法控制调焦镜头组得到清晰图像。实验证明,使用本论文算法可对复杂条件下的目标实现自动调焦,增强了测量电视的适用性。     

具有智能调节机构的航空发动机自适应控制系统

采用仅利用输入输出测量值的模型,参考自适应控制,设计了某型涡扇发动机的多变量控制系统;在飞行包线内选取标称点分别确定了自适应律的参数,以保证控制系统性能在该标称点处达到最优;用神经网络的方法拟合了发动机工作条件与自适应律参数之间的关系,建立了根据发动机工作状况选择合适自适应律参数的智能调节机构。仿真结果表明,所设计的控制系统在整个飞行包线内的标称点与非标称点均具有良好的性能。     

Adaptive data fusion framework for modeling of non-uniform aerodynamic data

Multi-fidelity Data Fusion(MDF) frameworks have emerged as a prominent approach to producing economical but accurate surrogate models for aerodynamic data modeling by integrating data with different fidelity levels. However, most existing MDF frameworks assume a uniform data structure between sampling data sources; thus, producing an accurate solution at the required level, for cases of non-uniform data structures is challenging. To address this challenge, an Adaptive Multi-fidelity Data Fusion(...