自适应严格收敛非奇异终端滑模制导律

针对机动目标的末制导拦截问题，设计了一种带终端角度约束的有限时间收敛终端滑模制导律。首先，分析了现有非奇异终端滑模制导律存在的滑模面不能严格有限时间收敛的问题，进而构造了一种新型的非奇异终端滑模面。其次，设计了一种对目标机动上界的自适应估计，提出了一种自适应严格收敛非奇异终端滑模制导律的设计方法。最后，基于Lyapunov稳定性理论，证明了设计的制导律能够使得制导系统在有限时间内收敛到零，并且保证了滑模面在收敛过程中不存在非收敛因子，是严格有限时间收敛的。仿真实验验证了该制导律能够有效地拦截机动目标，同时和与现有的非奇异终端滑模制导律以及基于转换滑模面的非奇异制导律相比，拦截时间更短，终端攻击角度精度更高，导弹机动消耗的能量更少。     

An adaptive fast fixed-time guidance law with an impact angle constraint for intercepting maneuvering targets

Sliding mode guidance laws based on a conventional terminal sliding mode guarantees only finite-time convergence, which verifies that the settling time is required to be estimated by selecting appropriate initial launched conditions. However, rapid convergence to a desired impact angle within a uniform bounded finite time is important in most practical guidance applications. A uniformly finite-time/fixed-time convergent guidance law means that the convergence (settling) time is predefined independently on initial conditions, that is, a closed-loop convergence time can be estimated a priori by guidance parameters. In this paper, a novel adaptive fast fixed-time sliding mode guidance law to intercept maneuver targets at a desired impact angle from any initial heading angle, with no problems of singularity and chattering, is designed. The proposed guidance law achieves system stabilization within bounded settling time independent on initial conditions and achieves more rapid convergence than those of fixed-time stable control methods by accelerating the convergence rate when the system is close to the origin. The achieved acceleration-magnitude constraints are rigorously enforced, and the chattering-free property is guaranteed by adaptive switching gains. Extensive numerical simulations are presented to validate the efficiency and superiority of the proposed guidance law for different initial engagement geometries and impact angles.     

考虑驾驶仪动态特性的固定时间收敛制导律

针对打击机动目标的制导问题,设计了一种同时考虑攻击角度约束、自动驾驶仪动态特性和固定时间收敛的新型制导律。首先,基于非奇异终端滑模控制和固定时间稳定性理论,采用反步递推方法设计制导律。在制导律设计过程中,设计了一种固定时间收敛的非奇异终端滑模面,基于固定时间控制和滑模控制,设计虚拟控制律,构造一种非线性一阶滤波器解决传统反步设计中的"微分膨胀"问题。基于超螺旋算法和固定时间稳定性理论,设计了一种固定时间收敛的滑模干扰观测器,用于估计目标机动等干扰。然后,基于Lyapunov稳定性理论,对制导律的固定时间稳定性进行了证明,并给出了收敛时间的表达式。最后,通过仿真分析,验证了所提制导律的有效性,和现有制导律相比,所提制导律具有较高的制导精度和角度约束精度、较快的系统收敛速度以及较少的能量消耗。     

A finite-time 3D guidance law based on fixed-time convergence disturbance observer

In order to achieve accurate interception of high-speed maneuvering targets, this paper presents a relative Line-of-Sight (LOS) velocity based finite-time three-dimensional guidance law design framework, and discusses the application of fixed-time convergence disturbance observer in this framework. Firstly, a simple Lyapunov function is provided to show that the coupled terms in the relative kinematics can be ignored in the proposed guidance law design framework. Secondly, the realizations of several classical guidance laws are analyzed with the proposed framework, including TPN guidance law, finite-time Input-to-State Stability (ISS) guidance law, and sliding mode guidance law. Thirdly, fixed-time convergence disturbance observers are introduced to design the composite finite-time 3D guidance law, and Lyapunov method is employed to show the stability of the guidance system. Numerical simulations with different scenarios show that the proposed generalized guidance law performs high interception accuracy.     

Three-dimensional guidance law based on adaptive integral sliding mode control

For the terminal guidance problem of missiles intercepting maneuvering targets in the three-dimensional space, the design of guidance laws for non-decoupling three-dimensional engage-ment geometry is studied. Firstly, by introducing a finite time integral sliding mode manifold, a novel guidance law based on the integral sliding mode control is presented with the target acceler-ation as a known bounded external disturbance. Then, an improved adaptive guidance law based on the integral sliding mode control without the information of the upper bound on the target accel-eration is developed, where the upper bound of the target acceleration is estimated online by a designed adaptive law. The both presented guidance laws can make sure that the elevation angular rate of the line-of-sight and the azimuth angular rate of the line-of-sight converge to zero in finite time. In the end, the results of the guidance performance for the proposed guidance laws are pre-sented by numerical simulations. Although the designed guidance laws are developed for the con-stant speed missiles, the simulation results for the time-varying speed missiles are also shown to further confirm the designed guidance laws.     

Three-dimensional time-varying sliding mode guidance law against maneuvering targets with terminal angle constraint

This paper deals with the problem of intercepting maneuvering targets with terminal angle constraints for missiles subjected to three-dimensional non-decoupling engagement geometry.To achieve the finite-time interception and satisfactory overload characteristics, a time varying sliding mode control methodology is developed based on a time base generator function. The main feature of the proposed guidance law guarantees the Line-of-Sight(LOS) angles to converge to small neighborhoods of the desir...     

三维自适应终端滑模协同制导律

针对多枚导弹协同作战的问题,且多枚导弹之间保持有向拓扑通信的条件下,基于终端滑模法设计了视线方向及视线法向的双层协同制导律。其中,视线方向的制导指令能够保证导弹同时完成拦截任务;视线法向上的三维制导律能够保证每枚导弹以期望的视线角攻击目标,从而发挥各枚导弹的最大杀伤力,并且视线角的约束相当于规划了末制导段导弹的弹道问题,在一定程度上避免攻击目标前导弹间发生碰撞。同时,针对所设计的滑模制导律设计了新的自适应律,从而加快了滑模面的收敛速度并且削弱了由符号函数引起的系统抖振现象。基于李雅普诺夫稳定性理论,证明了所设计制导律的正确性,并在最后给出了数学仿真实验,验证了所设计制导律的有效性及优越性。     

基于新型终端滑模的航天器执行器故障容错姿态控制

针对受干扰的刚体航天器冗余执行器存在故障与控制受限的姿态跟踪控制问题,提出一类基于新型指数形式的非奇异快速滑模面（ENFTSM）与趋近律的姿态容错控制器设计方法。当部分推力器发生故障时,假设剩余推力器具有输出饱和特性且能提供足够推力保证航天器执行任务,相比一般终端滑模控制器,本文设计的控制器不仅能使系统状态以更快的速度到达平衡点,且不需要在线对执行器故障信息进行检测和分离。基于Lyapunov方法证明本文设计的控制器能保证闭环系统稳定,且能有效地抑制外部干扰、控制受限和执行器故障等约束。最后对提出的控制算法进行了数值仿真,其结果表明了该控制器的有效性。     

基于新型终端滑模的航天器执行器故障容错姿态控制简

 针对受干扰的刚体航天器冗余执行器存在故障与控制受限的姿态跟踪控制问题,提出一类基于新型指数形式的非奇异快速滑模面（ENFTSM）与趋近律的姿态容错控制器设计方法。当部分推力器发生故障时,假设剩余推力器具有输出饱和特性且能提供足够推力保证航天器执行任务,相比一般终端滑模控制器,本文设计的控制器不仅能使系统状态以更快的速度到达平衡点,且不需要在线对执行器故障信息进行检测和分离。基于Lyapunov方法证明本文设计的控制器能保证闭环系统稳定,且能有效地抑制外部干扰、控制受限和执行器故障等约束。最后对提出的控制算法进行了数值仿真,其结果表明了该控制器的有效性。     

Three-dimensional adaptive finite-time guidance law for intercepting maneuvering targets

To intercept maneuvering targets at desired impact angles, a three-dimensional terminal guidance problem is investigated in this study. Because of a short terminal guidance time, a finitetime impact angle control guidance law is developed using the fast nonsingular terminal sliding mode control theory. However, the guidance law requires the upper bound of lumped uncertainty including target acceleration, which may not be accurately obtained. Therefore, by adopting a novel reaching law, an adaptive sliding mode guidance law is provided to release the drawback. At the same time, this method can accelerate the convergence rate and weaken the chattering phenomenon to a certain extent. In addition, another novel adaptive guidance law is also derived; this ensures systems asymptotic and finite-time stability without the knowledge of perturbations bounds.Numerical simulations have demonstrated that all the three guidance laws have effective performances and outperform the traditional terminal guidance laws.     

考虑落角约束的制导炸弹有限时间控制制导律

为了提高制导炸弹对目标的毁伤能力,更加有效地约束终端落角,利用终端滑模变结构控制理论和有限时间收敛性理论,在选取自适应趋近律和建立弹目相对运动模型的基础上,提出了一种考虑落角约束的制导炸弹有限时间控制制导律。然后,利用Lyapunov理论证明了所选取的滑模面和趋近律是有限时间收敛的。通过仿真实验验证了所提算法的有效性。仿真结果表明:与比例制导律相比,所提制导律既能使制导炸弹在有限时间内收敛到所期望的入射约束角附近,又能使炸弹的视线角及其角速度收敛的更快,具有一定的工程应用价值。     

螺旋俯冲机动突防的制导律设计

针对识别和拦截技术高度发展所带来的突防难题,提出高超声速滑翔飞行器（HGV）螺旋俯冲机动突防的概念,并为此设计了一种基于虚拟滑动目标的自适应比例导引律。首先,通过分析HGV绕目标飞行的运动学特性,建立对数型的螺旋运动模型,以该模型为基础利用曲线渐伸线原理设计虚拟目标的滑动轨迹。然后,采用包含时变附加项的比例导引律追踪虚拟目标,从而实现引导HGV进行螺旋俯冲机动以及对真实目标的打击。接着,为提高虚拟目标的跟踪精度以及抵抗外部干扰的能力,设计了制导参数的闭环非线性自适应律,能根据当前偏差在线选择制导参数值。此外,还分析了满足收敛条件的制导参数的取值范围以及其进入闭环更新的策略。最后,分别针对静止目标和低速移动目标进行数值仿真验证,结果表明所设计的制导律不但能够引导HGV实施螺旋俯冲机动,还能够准确地命中目标。     

不确定航空发动机分布式控制系统自适应滑模控制

针对存在参数摄动、外部干扰的航空发动机不确定性分布式控制系统,在系统具有时变输入时延和干扰上界未知的情况下,设计了具有鲁棒性能的自适应滑模控制器。基于预测控制和矩阵奇异值理论,对初始的发动机离散分布式模型进行等效线性变换,得到不显含时延项的规范形系统模型,便于进行滑模面参数的求解;在给定的H∞指标下,推导了滑模运动在非匹配不确定性作用下渐进稳定的充分条件,给出了线性矩阵不等式(LMI)形式的滑模面参数设计方法;最后,设计对干扰具有估计功能的自适应率,在此基础上提出自适应滑模控制器。仿真结果表明:所设计的控制器能够有效降低外部干扰对系统动态性能的影响,在所考虑的不确定性因素作用下,系统的滑模运动具有理想的H∞性能。当外部干扰强度变化时,控制器的鲁棒性较好,状态收敛时间小于0.8s,且不存在抖振。      

Approach and landing guidance design for reusable launch vehicle using multiple sliding surfaces technique

An autonomous approach and landing (A&L) guidance law is presented in this paper for landing an unpowered reusable launch vehicle (RLV) at the designated runway touchdown.Considering the full nonlinear point-mass dynamics,a guidance scheme is developed in threedimensional space.In order to guarantee a successful A&L movement,the multiple sliding surfaces guidance (MSSG) technique is applied to derive the closed-loop guidance law,which stems from higher order sliding mode control theory and has advantage in the finite time reaching property.The global stability of the proposed guidance approach is proved by the Lyapunov-based method.The designed guidance law can generate new trajectories on-line without any specific requirement on off-line analysis except for the information on the boundary conditions of the A&L phase and instantaneous states of the RLV.Therefore,the designed guidance law is flexible enough to target different touchdown points on the runway and is capable of dealing with large initial condition errors resulted from the previous flight phase.Finally,simulation results show the effectiveness of the proposed guidance law in different scenarios.     

基于终端角度约束的滑模制导律设计

针对打击地面目标的制导问题,提出了一种新的具有终端角度约束的鲁棒滑模制导律。在建立地面目标和导弹的相对运动学关系的基础上,基于零化弹目视线角速率的思想,采用变结构控制理论的方法,通过选择理想的终端角度确定一个光滑的非线性滑动模态,代替传统末制导律设计的滑动模态,利用Lyapunov稳定理论设计得到了具有鲁棒性的滑模末制导律,实现了在有限时间精确打击目标,满足终端角度的要求。数字仿真表明,这种制导律对目标的运动具有很好的鲁棒性和适应性,并能获得良好的制导精度和指定的终端角度要求。     

越肩发射反导拦截弹复合制导律研究

研究了优化反导拦截弹的越肩发射制导律,实现了对尾追目标的拦截,采用伪谱法和滑膜变结构理论设计了全弹道复合制导规律。利用Radau伪谱法求解以转弯时间最优为指标泛函的最佳转弯规律,通过曲线拟合给出了初制导转弯段的过载指令。选择零控脱靶量作为滑动模态对末制导律进行设计;利用这两种制导律的加速度指令构造了交接班导引律实现弹道的平滑。最后,对载机越肩发射反导拦截弹拦截来袭导弹的反导场景进行了数字仿真,结果表明所设计的复合制导律能够完成反导拦截任务。     

高效强力复合铣A轴的动力学建模与自适应滑模控制

A轴单元作为五轴数控机床的关键功能部件,其控制精度直接影响工件的加工精度和表面质量。针对系统参数摄动和不确定性切削负载对A轴伺服系统控制精度的影响,分析了A轴驱动系统的动静态性能,讨论了驱动扭矩、负载扭矩、运动方向和系统参数之间的相互关系,并建立了系统的非线性动力学模型。基于该动力学模型,设计了自适应模糊滑模控制器（AFSMC）,采用模糊系统对滑模控制律中的非线性函数项进行自适应逼近,并基于Lyapunov理论设计了模糊系统中可调参数的自适应律,同时,在滑模控制（SMC）的切换控制部分采用了指数趋近律。实验结果表明,所设计的AFSMC对不确定性负载扭矩和系统参数摄动具有较强的鲁棒性。与传统滑模控制（TSMC）相比,其在有效减小控制输入抖振的同时,使得跟踪控制精度提高了14.54%。     

Composite anti-disturbance position and attitude control for spacecrafts with parametric uncertainty and flexible vibration

The rendezvous and proximity operations with respect to a tumbling non-cooperative target pose high requirement for the position and attitude control accuracy of servicing spacecraft.However, multiple disturbances including parametric uncertainties, flexible vibration, and unknown nonlinear dynamics degrade the control performance significantly. In order to enhance the system anti-disturbance ability, this paper proposes a composite anti-disturbance control law for the spacecraft position and at...     

Adaptive nonlinear guidance law considering control loop dynamics

A new adaptive nonlinear guidance law is proposed here. The fourth order state equation for integrated guidance and control loop is formulated taking into consideration the target uncertainties and control loop dynamics. The state equation is further changed into the normal form by nonlinear coordinate transformation. Using the normal form of state equation, an adaptive nonlinear guidance law is proposed to compensate for the uncertainties in both target acceleration and control loop dynamics. The proposed law adopts the sliding mode control approach with adaptation for unknown bound of uncertainties. The present approach can effectively solve the existing guidance problem against target maneuver and the limited performance of control loop. We have provided the stability analyses and performed simulations comparing favorably our approach to the state of the art.     

永磁同步电机的改进快速终端滑模控制

针对线性滑模控制永磁同步电机不能实现有限时间控制以及终端滑模控制不能实现快速收敛的问题,提出了一种改进快速终端滑模控制方法。所提控制方法经理论证明能实现更快的收敛速度。滑模控制律通过Lyapunov稳定性定理计算得出。对所提方法进行了仿真验证,并与终端滑模控制作对比,结果证明了所提改进快速终端滑模控制能有效地提高系统的起动性能和抗扰动性能。