NASA's Space Life Sciences Training Program.

The Space Life Sciences Training Program (SLSTP) is an intensive, six-week training program held every summer since 1985 at the Kennedy Space Center (KSC). A major goal of the SLSTP is to develop a cadre of qualified scientists and engineers to support future space life sciences and engineering challenges. Hand-picked, undergraduate college students participate in lectures, laboratory sessions, facility tours, and special projects: including work on actual Space Shuttle flight experiments and baseline data collection. At NASA Headquarters (HQ), the SLSTP is jointly sponsored by the Life Sciences Division and the Office of Equal Opportunity Programs: it has been very successful in attracting minority students and women to the fields of space science and engineering. In honor of the International Space Year (ISY), 17 international students participated in this summer's program. An SLSTP Symposium was held in Washington D.C., just prior to the World Space Congress. The Symposium attracted over 150 SLSTP graduates for a day of scientific discussions and briefings concerning educational and employment opportunities within NASA and the aerospace community. Future plans for the SLSTP include expansion to the Johnson Space Center in 1995.     

Mission simulation as an approach to develop requirements for automation in Advanced Life Support Systems.

This paper examines mission simulation as an approach to develop requirements for automation and robotics for Advanced Life Support Systems (ALSS). The focus is on requirements and applications for command and control, control and monitoring, situation assessment and response, diagnosis and recovery, adaptive planning and scheduling, and other automation applications in addition to mechanized equipment and robotics applications to reduce the excessive human labor requirements to operate and maintain an ALSS. Based on principles of systems engineering, an approach is proposed to assess requirements for automation and robotics using mission simulation tools. First, the story of a simulated mission is defined in terms of processes with attendant types of resources needed, including options for use of automation and robotic systems. Next, systems dynamics models are used in simulation to reveal the implications for selected resource allocation schemes in terms of resources required to complete operational tasks. The simulations not only help establish ALSS design criteria, but also may offer guidance to ALSS research efforts by identifying gaps in knowledge about procedures and/or biophysical processes. Simulations of a planned one-year mission with 4 crewmembers in a Human Rated Test Facility are presented as an approach to evaluation of mission feasibility and definition of automation and robotics requirements.     

Controlled Ecological Life Support Systems (CELSS) flight experimentation.

The NASA CELSS program has the goal of developing life support systems for humans in space based on the use of higher plants. The program has supported research at universities with a primary focus of increasing the productivity of candidate crop plants. To understand the effects of the space environment on plant productivity, the CELSS Test Facility (CTF) has been been conceived as an instrument that will permit the evaluation of plant productivity on Space Station Freedom. The CTF will maintain specific environmental conditions and collect data on gas exchange rates and biomass accumulation over the growth period of several crop plants grown sequentially from seed to harvest. The science requirements of the CTF will be described, as will current design concepts and specific technology requirements for operation in micro-gravity.     

Approaches to resource recovery in Controlled Ecological Life Support Systems.

Recovery of resources from waste streams in a space habitat is essential to minimize the resupply burden and achieve self sufficiency. The ultimate goal of a Controlled Ecological Life Support System (CELSS) is to achieve the greatest practical level of mass recycle and provide self sufficiency and safety for humans. Several mission scenarios leading to the ultimate application could employ CELSS component technologies or subsystems with initial emphasis on recycle of the largest mass components of the waste stream. Candidate physical/chemical and biological processes for resource recovery from liquid and solid waste streams are discussed and the current fundamental recovery potentials are estimated.     

Potentialities of theoretical and experimental prediction of Life Support Systems reliability.

To develop and design Life Support Systems it is necessary to evaluate their reliability. However direct experiments take much time, are very expensive, and therefore are practically impossible. Promising way is to use approximate estimates of reliability, which need essentially fewer amounts of experimental data. Two types of estimates of Life Support System reliability--additive and multiplicative ones are considered in the paper. Additive estimate is based on the assumption that total system failure probability is low and therefore it can be considered as the sum of failure probability of separate units. Additive approach allows obtaining near lower-bounded estimate of failure probability. Multiplicative estimate allows evaluating the possibility of system catastrophe due to simultaneous effect of several factors when each of them separately is not dangerous. Evaluation shows that the possible error of reliability forecast increases with the increasing of number of external factors faster than exponential function. An illustration of the ecological similarity approach as promising tool for providing estimation of full-scale system reliability by means the set of small similar experimental models.     

Interaction of physical-chemical and biological regeneration processes in ecological Life Support Systems.

Catalytic combustion of inedible biomass of plants in ecological Life Support Systems (LSS) gives rise to gaseous oxides (CO2, NO2, SO2, etc.). Some of them are toxic for plants suppressing their photosynthesis and productivity. Experiments with "Bios-3" experimental LSS demonstrate that a decrease of photosynthetic productivity in a system with straw incineration can jeopardize its steady operation. Analysis of the situation by a mathematical model taking into account absorption parameters of the system in terms of toxic elements makes it possible to formulate requirements for the structure and operation of LSS to provide for its stability. Avenues for further investigation of the problem of toxic stability of LSS are proposed.     

Using explanatory crop models to develop simple tools for Advanced Life Support system studies.

System-level analyses for Advanced Life Support require mathematical models for various processes, such as for biomass production and waste management, which would ideally be integrated into overall system models. Explanatory models (also referred to as mechanistic or process models) would provide the basis for a more robust system model, as these would be based on an understanding of specific processes. However, implementing such models at the system level may not always be practicable because of their complexity. For the area of biomass production, explanatory models were used to generate parameters and multivariable polynomial equations for basic models that are suitable for estimating the direction and magnitude of daily changes in canopy gas-exchange, harvest index, and production scheduling for both nominal and off-nominal growing conditions.     

Integration test project of CEEF--a test bed for Closed Ecological Life Support Systems.

CEEF (Closed Ecology Experiment Facilities) were installed at Rokkasho village in northern Japan, for the purpose of clarifying life-support mechanisms in a completely closed space, such as a Lunar or Mars base. An integration test using the Closed Plantation Experiment Facility and Closed Animal Breeding & Habitation Experiment Facility is needed before conducting an entire closed experiment including plants, animals and humans. These integration tests are planned to be conducted step by step from fiscal 2001 to 2008.     

Self-restoration of biocomponents as a mean to enhance Biological Life Support Systems reliability.

One of the key problems of long-term space missions is limited service life of units. The only exceptions are biological components of biological Life Support Systems--higher plants or microorganisms. These components are capable of self-restoration: after complete disintegration, they can appear again from seeds or spores. The estimate of failure intensity of BLSS regeneration component includes: a number of self-sustained sections of the regeneration component; permissible boost (how many times can productivity of a component be increased); time required to repair (restore) a component; the crew existence time, when all LSS regeneration components fail; failure rate of one section of a regeneration component. Evaluations show that for hydrogen-oxidizing bacteria and micro-algae very high reliability is achieved even for one or two sections. In the case of higher plants (due to low rate of self-restoration) bio-regenerative module has to be divided into 10 self-sustained sections operating simultaneously. These measures can decrease the probability of catastrophe by a factor of 10(6).     

KM6载人航天器空间环境试验设备

KM6载人航天器空间环境试验设备是中国最大的一台空间环境模拟试验设备 ,是国际上五大典型空间环境试验设备之一。已建成的有 9个分系统 ,模拟室由三舱组合 ,主模拟室直径 1 2 m、高 2 2 .4m,极限真空度 4.5× 1 0 - 6Pa、热沉温度 1 0 0 K,主要性能达到国际先进水平。文章对其技术指标、系统组成、功能、特点进行了介绍 ,并给出了试验结果 ;对研制过程中的重要技术问题进行了分析     

Initial closed operation of the CELSS Test Facility Engineering Development Unit.

As part of the NASA Advanced Life Support Flight Program, a Controlled Ecological Life Support System (CELSS) Test Facility Engineering Development Unit has been constructed and is undergoing initial operational testing at NASA Ames Research Center. The Engineering Development Unit (EDU) is a tightly closed, stringently controlled, ground-based testbed which provides a broad range of environmental conditions under which a variety of CELSS higher plant crops can be grown. Although the EDU was developed primarily to provide near-term engineering data and a realistic determination of the subsystem and system requirements necessary for the fabrication of a comparable flight unit, the EDU has also provided a means to evaluate plant crop productivity and physiology under controlled conditions. This paper describes the initial closed operational testing of the EDU, with emphasis on the hardware performance capabilities. Measured performance data during a 28-day closed operation period are compared with the specified functional requirements, and an example of inferring crop growth parameters from the test data is presented. Plans for future science and technology testing are also discussed.     

The CELSS Test Facility project: an example of a CELSS flight experiment system.

The CELSS Test Facility (CTF) is a device for measuring crop plant productivity in the micro-gravity environment of Space Station Freedom. It will allow us to address questions of crop productivity in space, versus that on the ground. The crop productivity factors that will be measured are rates of: 1) biomass production, 2) food production, 3) O2 and CO2 exchange, and 4) water transpiration. In addition, other productivity factors of specific crops will be determined, such as : 1) the ratio of edible to inedible biomass (harvest index), 2) leaf area exposed to and collecting light (leaf area index), 3) ratio of root mass to total biomass, and 4) photosynthetic efficiency (ratio of moles of CO2 fixed (or O2 produced), per mole of photons of specific energies used). Plant and crop morphology, at several levels, ranging from the community to the sub-cellular, will also be evaluated.     

二氧化碳甲烷化在载人航天器再生式环控生保系统中的应用

二氧化碳甲烷化（Sabatier反应）是载人航天再生式环控生保系统中空气质量管理的关键技术,也是焦炉气甲烷化和煤制天然气甲烷化流程中最后一级反应器主要进行的化学反应.化工行业中的二氧化碳甲烷化,尤其是针对高纯度二氧化碳的甲烷化技术,与载人航天用Sabatier技术既有共同点又存在差异.通过对Sabatier技术工艺、催化剂和关键设计的总结,对比分析应用于两个不同领域的二氧化碳甲烷化技术在工艺流程、催化剂和反应器方面的差异,借鉴工业二氧化碳甲烷化技术经验,提出载人航天用Sabatier技术可能的优化方向.     

Element exchange in a water- and gas-closed biological Life Support System.

Liquid human wastes and household water used for nutrition of wheat made possible to realize 24% closure for the mineral exchange in an experiment with a 2-component version of "Bios-3" life support system (LSS) Input-output balances of revealed, that elements (primarily trace elements) within the system. The structural materials (steel, titanium), expanded clay aggregate, and catalytic furnace catalysts. By the end of experiment, the permanent nutrient solution, plants, and the human diet gradually built up Ni, Cr, Al, Fe, V, Zn, Cu, and Mo. Thorough selection and pretreatment of materials can substantially reduce this accumulation. To enhance closure of the mineral exchange involves processing of human-metabolic wastes and inedible biomes inside LSS. An efficient method to oxidize wastes by hydrogen peroxide icon a quartz reactor at the temperature of 80 degrees C controlled electromagnetic field is proposed.     

Evaluation of optimal configuration of hybrid Life Support System for Space.

Any comprehensive evaluation of Life Support Systems (LSS) for space applications has to be conducted taking into account not only mass of LSS components but also all relevant equipment and storage: spare parts, additional mass of space ship walls, power supply and heat rejection systems. In this paper different combinations of hybrid LSS (HLSS) components were evaluated. Three variants of power supply were under consideration--solar arrays, direct solar light transmission to plants, and nuclear power. The software based on simplex approach was used for optimizing LSS configuration with respect to its mass. It was shown that there are several LSS configuration, which are optimal for different time intervals. Optimal configurations of physical-chemical (P/C), biological and hybrid LSS for three types of power supply are presented.     

Application of NASA's advanced life support technologies in polar regions.

NASA's advanced life support technologies are being combined with Arctic science and engineering knowledge in the Advanced Life Systems for Extreme Environments (ALSEE) project. This project addresses treatment and reduction of waste, purification and recycling of water, and production of food in remote communities of Alaska. The project focus is a major issue in the state of Alaska and other areas of the Circumpolar North; the health and welfare of people, their lives and the subsistence lifestyle in remote communities, care for the environment, and economic opportunity through technology transfer. The challenge is to implement the technologies in a manner compatible with the social and economic structures of native communities, the state, and the commercial sector. NASA goals are technology selection, system design and methods development of regenerative life support systems for planetary and Lunar bases and other space exploration missions. The ALSEE project will provide similar advanced technologies to address the multiple problems facing the remote communities of Alaska and provide an extreme environment testbed for future space applications. These technologies have never been assembled for this purpose. They offer an integrated approach to solving pressing problems in remote communities.     

Soybean cultivation for Bioregenerative Life Support Systems (BLSSs): The effect of hydroponic system and nitrogen source

Soybean [Glycine max (L.) Merr.] is one of the plant species selected within the European Space Agency (ESA) Micro-Ecological Life Support System Alternative (MELiSSA) project for hydroponic cultivation in Biological Life Support Systems (BLSSs), because of the high nutritional value of seeds. Root symbiosis of soybean with Bradirhizobium japonicum contributes to plant nutrition in soil, providing ammonium through the bacterial fixation of atmospheric nitrogen. The aim of this study was to evaluate the effects of two hydroponic systems, Nutrient Film Technique (NFT) and cultivation on rockwool, and two nitrogen sources in the nutrient solution, nitrate (as Ca(NO₃)₂ and KNO₃) and urea (CO(NH₂)₂), on root symbiosis, plant growth and seeds production of soybean. Plants of cultivar ‘OT8914’, inoculated with B. japonicum strain BUS-2, were grown in a growth chamber, under controlled environmental conditions.     

Proximate composition of CELSS crops grown in NASA's Biomass Production Chamber.

Edible biomass from four crops of wheat (Triticum aestivum L.), four crops of lettuce (Lactuca sativa L.), four crops of potato (Solanum tuberosum L.), and three crops of soybean (Glycine max (L.) Merr.) grown in NASA's CELSS Biomass Production Chamber were analyzed for proximate composition. All plants were grown using recirculating nutrient (hydroponic) film culture with pH and electrical conductivity automatically controlled. Temperature and humidity were controlled to near optimal levels for each species and atmospheric carbon dioxide partial pressures were maintained near 100 Pa during the light cycles. Soybean seed contained the highest percentage of protein and fat, potato tubers and wheat seed contained the highest levels of carbohydrate, and lettuce leaves contained the highest level of ash. Analyses showed values close to data published for field-grown plants with several exceptions: In comparison with field-grown plants, wheat seed had higher protein levels; soybean seed had higher ash and crude fiber levels; and potato tubers and lettuce leaves had higher protein and ash levels. The higher ash and protein levels may have been a result of the continuous supply of nutrients (e.g., potassium and nitrogen) to the plants by the recirculating hydroponic culture.     

基于系统科学的复杂系统软件生命周期模型研究

复杂系统的核心功能主要由软件实现,软件对复杂系统的可信性和质量有至关重要的影响.目前复杂系统软件的研制和管理主要采用基于一般系统工程的方法,未考虑复杂系统所具有的开放性、涌现性、自组织性等特征,存在一定局限性.为保证复杂系统软件的可信性和质量,基于复杂系统的主要特征,引入系统科学的方法及理论对现有方法进行扩展,并结合敏...