共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
3.
朱永伟%王占和%范仲俊 《宇航材料工艺》2008,38(5)
提出了制作微结构的超声复合加工方法,分析了超声、超声复合电火花、超声复合电解微细加工机理。用微细放电组合工艺制作了多种截形微细工具电极;完善试验系统,进行了多种材料、形状微结构超声复合加工试验。结果表明:超声加工是制作硬脆材料微结构的有效方法;超声复合电火花制作金属材料微结构有较好的精度及加工稳定性;超声复合电解加工兼有效率高、精度好的技术优势。 相似文献
4.
5.
6.
从加工方法,加工参数,工装夹具等方面对薄壁、薄板类零件的加工进行深入探讨,有效地解决了薄壁、薄板类零件的加工,为今后进行此类零件的加工进行了有益的技术储备。 相似文献
7.
8.
9.
电火花加工技术经过多年的发展,已经成为一门成熟且不可或缺的加工方法,新工艺、新方法和新装备层出不穷,如何提高加工效率一直是人们所关注的焦点。电火花加工过程中,为防止对工件产生损伤,要避免电弧放电,通过各种工艺手段提高加工效率的效果不明显。通过有效控制电弧通断,利用电弧弧柱极高的能量去除材料,可以极大地提高放电加工效率,是近年来研究高效放电加工的一个新方向。另外,放电烧蚀加工利用电火花放电作为诱导能量,控制金属基体与通入的氧气燃烧产生化学能用于蚀除工件,该能量远远大于脉冲电源的能量,是高效放电加工的另外一个新方向。放电烧蚀加工辅以其他方法形成复合加工,对已烧蚀表面进行优化处理,可以实现高加工效率的同时获得良好的表面质量。综述了电火花加工、电弧加工和放电烧蚀加工技术在高效加工方面的研究现状。 相似文献
10.
对国内外微细电火花线切割加工技术的研究现状和发展趋势进行了系统的分析,有助于该技术的进一步发展和应用。 相似文献
11.
现代特种加工技术的发展 总被引:12,自引:0,他引:12
简述了特种加工的技术特点和未来发展趋势,分别论述了高能束流加工、电火花加工、电解加工、物料切蚀加工和复合加工技术的概念、特征与应用状况。 相似文献
12.
《中国航空学报》2020,33(12):3447-3459
In the machining of complicated surfaces, the cutters with large length/diameter ratios are used widely and the deformation of the machining system is one of the principal error sources. During the process planning stage, the cutting direction angle, the cutter lead and tilt angles are usually optimized to minimize the force induced error. It may lead to a low machining efficiency for bullnose end mills, as the material removal rates are different largely for different machining angles. In this paper, the influence mechanism of the machining angles on the force induced error is studied based on the models of the instantaneous cutting force when the cutter flute traveling through the cutting contact point and the stiffness of the machining system. In order to evaluate the machining angles, the force induced error/efficiency indicator (FEI) is defined as the division of the force induced error and the equal volume sphere of the removed material. FEI is dimensionless, with the lower FEI, the lower force induced error and the higher machining efficiency. For optimal selection of the machining angles, the critical FEI is calculated with the constraint of force induced error and the desired material removal rate, and the critical FEI separate the set of the machining angles into two subsets. After the feed rate scheduling process, the machining angles in the optimal subset would have higher machining accuracy and efficiency, while the machining angles in the other subset have lower machining accuracy and efficiency. Through the machining experiment of five axis machining and freeform surface machining, the effectiveness and superiority of the proposed FEI method is verified with a bullnose end mill, which can improve the machining efficiency with the constraint of force induced error. 相似文献
13.
分析了在线测量误差和机械加工误差及过程尺寸基准对零件加工结构的影响 ,给出了过程尺寸基准和验收安全裕度的优化数学模型 ,讨论了过程尺寸基准在轴承内环内孔磨削加工中的应用 ,得出了在加工过程中使过程尺寸基准适当偏离公差带中点可以减少废品率、降低产品成本的结论 相似文献
14.
15.
模具制造的高速加工工艺研究 总被引:3,自引:0,他引:3
高速加工不但可以成倍地提高生产效率,还可进一步改善零件的加工精度和表面质量,解决一些常规加工中难以解决的某些特殊材料的高效加工问题,因此,高速加工技术在世界上引起了高度重视。主要从加工工艺方面讲述了高速铣削的技术特点以及在模具加工行业的应用。最后展望了高速加工的发展应用前景。 相似文献
16.
蒋海滨%魏伯荣%李名琦 《宇航材料工艺》2002,32(2):38-42
针对芳纶复合材料壳体后加工存在的问题,本文采用了通用机械加工和激光加工两种方法,通过优化加工工艺,分析了钻头的几何形状、转速、加工条件(冷却和施加背衬材料)等因素对加工的表面质量及尺寸的稳定性的影响,进而探讨了采用通用机械加工方法需要注意的一些问题,且对比分析了激光加工的特点及其实际应用的条件。 相似文献
17.
高速加工(HSM)具有许多优点,被广泛应用在航空产品的数控加工中。但是使用高速加工技术,不仅要有适合高速加工的设备,选择适合进行高速加工的刀具,更为重要的是选择合理的编程策略。任何编程策略的不合理都会造成严重的后果。所以数控编程一直是高速加工的重点和难点。以UG软件为研究对象,作者提出了实现高速加工的数控编程的策略,并使用高速铣雕设备对生成的NG代码进行了加工,加工结果验证了NG代码是正确的、合理的。说明了采用合理的加工策略,使用UG软件可以实现高速加工的编程。 相似文献
18.
《中国航空学报》2020,33(10):2782-2793
Superalloys are commonly used in aircraft manufacturing; however, the requirements for high surface quality and machining accuracy make them difficult to machine. In this study, a hybrid electrochemical discharge process using variable-amplitude pulses is proposed to achieve this target. In this method, electrochemical machining (ECM) and electrical discharge machining (EDM) are unified into a single process using a sequence of variable-amplitude pulses such that the machining process realizes both good surface finish and high machining accuracy. Furthermore, the machining mechanism of the hybrid electrochemical discharge process using variable-amplitude pulses is studied. The mechanism is investigated by observations of machining waveforms and machined surface. It is found that, with a high-frequency transformation between high- and low-voltage waveforms within a voltage cycle, the machining mechanism is frequently transformed from EDM to pure ECM. The critical discharge voltage is 40 V. When pulse voltages greater than 40 V are applied, the machining accuracy is good; however, the surface has defects such as numerous discharge craters. High machining accuracy is maintained when high-voltage pulses are replaced by low-voltage pulses to enhance electrochemical dissolution. The results indicate that the proposed hybrid electrochemical discharge process using variable-amplitude pulses can yield high-quality surfaces with high machining accuracy. 相似文献
19.
自由曲面叶轮的四坐标数控加工研究 总被引:7,自引:2,他引:7
针对自由曲面叶轮的四坐标加工,提出了一种刀轴矢量的确定方法。给定工作台倾斜角度和刀具后跟角,四坐标加工的刀轴矢量必然位于这两个角度确定的两个圆锥面上。通过对两个圆锥面求交并结合叶轮加工的实际特点,给出了自由曲面叶轮四坐标加工刀轴矢量的计算方法。根据得到的刀轴矢量,计算相应的侧偏角,从而可将五坐标加工的理论和方法直接应用于四坐标加工中。算例表明,该方法合理可行,能够有效提高四坐标加工效率、降低叶轮加工成本,并可推广至一般曲面的四坐标加工以及五轴四联动加工。 相似文献