基于IMMKF算法的ADS-B监视应用目标跟踪

目标跟踪是机载广播式自动相关监视（ADS-B）应用的基础功能,对提升航空器周边的弱机动民航飞机目标跟踪性能具有重要意义。提出一种基于交互式多模型卡尔曼滤波（IMMKF）算法的ADS-B 监视应用目标跟踪方法。首先,针对弱机动背景下的民航飞机的飞行特点,建立包含匀速模型和标准协同转弯模型的运动模型集,并对模型进行线性化近似;然后,将模型预测和ADS-B 状态矢量量测数据作为IMMKF 算法中多个并行卡尔曼滤波器的输入,进行并行滤波;最后,计算得到目标状态矢量的估计和模型近似概率,并作为下一次迭代的输入。结果表明：相比于基于匀速模型的卡尔曼滤波目标跟踪方法,IMMKF 方法的位置跟踪误差降低了59%,速度跟踪误差降低了77%,显著提升了状态估计性能,具备较高的跟踪精度、稳健性与计算效率,在ADS-B 监视应用中具有实际应用价值与借鉴意义。     

Multiple-Model Probability Hypothesis Density Filter for Tracking Maneuvering Targets

Tracking multiple targets with uncertain target dynamics is a difficult problem, especially with nonlinear state and/or measurement equations. With multiple targets, representing the full posterior distribution over target states is not practical. The problem becomes even more complicated when the number of targets varies, in which case the dimensionality of the state space itself becomes a discrete random variable. The probability hypothesis density (PHD) filter, which propagates only the first-order statistical moment (the PHD) of the full target posterior, has been shown to be a computationally efficient solution to multitarget tracking problems with a varying number of targets. The integral of PHD in any region of the state space gives the expected number of targets in that region. With maneuvering targets, detecting and tracking the changes in the target motion model also become important. The target dynamic model uncertainty can be resolved by assuming multiple models for possible motion modes and then combining the mode-dependent estimates in a manner similar to the one used in the interacting multiple model (IMM) estimator. This paper propose a multiple-model implementation of the PHD filter, which approximates the PHD by a set of weighted random samples propagated over time using sequential Monte Carlo (SMC) methods. The resulting filter can handle nonlinear, non-Gaussian dynamics with uncertain model parameters in multisensor-multitarget tracking scenarios. Simulation results are presented to show the effectiveness of the proposed filter over single-model PHD filters.     

Road-map assisted ground moving target tracking

Tracking ground targets with airborne GMTI (ground moving target indicator) sensor measurements proves to be a challenging task due to high target density, high clutter, and low visibility. The exploitation of nonstandard background information such as road maps and terrain information is therefore highly desirable for the enhancement of track quality and track continuity. The present paper presents a Bayesian approach to incorporate such information consistently. It is particularly suited to deal with winding roads and networks of roads. The target dynamics is modeled in quasi one-dimensional road coordinates and mapped onto ground coordinates using linear road segments taking road map errors into account. The case of several intersecting roads with different characteristics, such as mean curvature, slope, or visibility, is treated within an interacting multiple model (IMM) scheme. Targets can be masked both by the clutter notch of the sensor and by terrain obstacles. Both effects are modeled using a sensor-target state dependent detection probability. The iterative filter equations are formulated within a framework of Gaussian sum approximations on the one hand and a particle filter approach on the other hand. Simulation results for single targets taken from a realistic ground scenario show strongly reduced target location errors compared with the case of neglecting road-map information. By modeling the clutter notch of the GMTI sensor, early detection of stopping targets is demonstrated     

Precision large scale air traffic surveillance using IMM/assignmentestimators

We present the development and implementation of a multisensor-multitarget tracking algorithm for large scale air traffic surveillance based on interacting multiple model (IMM) state estimation combined with a 2-dimensional assignment for data association. The algorithm can be used to track a large number of targets from measurements obtained with a large number of radars. The use of the algorithm is illustrated on measurements obtained from 5 FAA radars, which are asynchronous, heterogeneous, and geographically distributed over a large area. Both secondary radar data (beacon returns from cooperative targets) as well as primary radar data (skin returns from noncooperative targets) are used. The target IDs from the beacon returns are not used in the data association. The surveillance region includes about 800 targets that exhibit different types of motion. The performance of an IMM estimator with linear motion models is compared with that of the Kalman filter (KF). A number of performance measures that can be used on real data without knowledge of the ground truth are presented for this purpose. It is shown that the IMM estimator performs better than the KF. The advantage of fusing multisensor data is quantified. It is also shown that the computational requirements in the multisensor case are lower than in single sensor case, Finally, an IMM estimator with a nonlinear motion model (coordinated turn) is shown to further improve the performance during the maneuvering periods over the IMM with linear models     

Efficient particle filtering for road-constrained target tracking

The variable-structure multiple-model particle filtering approach for state estimation of road-constrained targets is addressed. The multiple models are designed to account for target maneuvers including "move-stop-move" and motion ambiguity at an intersection; the time-varying active model sets are adaptively selected based on target state and local terrain condition. The hybrid state space is partitioned into the mode subspace and the target subspace. The mode state is estimated based on random sampling; the target state as well as the relevant likelihood function associated with a mode sample sequence is approximated as Gaussian distribution, of which the conditional mean and covariance are deterministically computed using a nonlinear Kalman filter which accounts for road constraints in its update. The importance function for the sampling of the mode state approximates the optimal importance function under the same Gaussian assumption of the target state.     

New assignment-based data association for tracking move-stop-move targets

We present a new assignment-based algorithm for data association in tracking ground targets employing evasive move-stop-move maneuvers using ground moving target indicator (GMTI) reports obtained from an airborne sensor. To avoid detection by the GMTI sensor, the targets deliberately stop for some time before moving again. The sensor does not detect a target when the latter's radial velocity (along the line-of-sight from the sensor) falls below a certain minimum detectable velocity (MDV). Even in the absence of move-stop-move maneuvers, the detection has a less-than-unity probability (P/sub D/<1) due to obscuration and thresholding. Then, it is of interest, when a target is not detected, to develop a systematic technique that can distinguish between lack of detection due to P/sub D/<1 and lack of detection due to a stop (or a near stop). Previously, this problem was solved using a variable structure interacting multiple model (VS-IMM) estimator with a stopped target model (VS-IMM-ST) without explicitly addressing data association. We develop a novel "two-dummy" assignment approach for move-stop-move targets that considers both the problem of data association as well as filtering. Typically, in assignment-based data association a "dummy" measurement is used to denote the nondetection event. The use of the standard single-dummy assignment, which does not handle move-stop-move motion explicitly, can result in broken tracks. The new algorithm proposed here handles the evasive move-stop-move motion by introducing a second dummy measurement to represent nondetection due to the MDV. We also present a likelihood-ratio-based track deletion scheme for move-stop-move targets. Using this two-dummy data association algorithm, the track corresponding to a move-stop-move target is kept "alive' during missed detections both due to MDV and due to P/sub D/<1. In addition, one can obtain reductions in both rms estimation errors as well as the total number of track breakages.     

Tracking a ballistic target: comparison of several nonlinear filters

This paper studies the problem of tracking a ballistic object in the reentry phase by processing radar measurements. A suitable (highly nonlinear) model of target motion is developed and the theoretical Cramer-Rao lower bounds (CRLB) of estimation error are derived. The estimation performance (error mean and standard deviation; consistency test) of the following nonlinear filters is compared: the extended Kalman filter (EKF), the. statistical linearization, the particle filtering, and the unscented Kalman filter (UKF). The simulation results favor the EKF; it combines the statistical efficiency with a modest computational load. This conclusion is valid when the target ballistic coefficient is a priori known.     

A Gaussian Mixture PHD Filter for Jump Markov System Models

The probability hypothesis density (PHD) filter is an attractive approach to tracking an unknown and time-varying number of targets in the presence of data association uncertainty, clutter, noise, and detection uncertainty. The PHD filter admits a closed-form solution for a linear Gaussian multi-target model. However, this model is not general enough to accommodate maneuvering targets that switch between several models. In this paper, we generalize the notion of linear jump Markov systems to the multiple target case to accommodate births, deaths, and switching dynamics. We then derive a closed-form solution to the PHD recursion for the proposed linear Gaussian jump Markov multi-target model. Based on this an efficient method for tracking multiple maneuvering targets that switch between a set of linear Gaussian models is developed. An analytic implementation of the PHD filter using statistical linear regression technique is also proposed for targets that switch between a set of nonlinear models. We demonstrate through simulations that the proposed PHD filters are effective in tracking multiple maneuvering targets.     

Tracking of crossing targets with imaging sensors

The authors present an algorithm for the tracking of crossing targets using the centroid measurement and the centroid offset measurement of the distributed image formed by the targets. The measurements are obtained by a forward-looking infrared (FLIR) imaging sensor. The joint probabilistic data association merged-measurement coupled filter (JPDAMCF) is used for state estimation which performs filtering in a coupled manner for the targets with common measurements. Two filters are examined: one assuming the displacement noise white and the other one modeling it correctly as autocorrelated. The latter is shown to yield substantially better performance. The proposed algorithm demonstrates the usefulness of the JPDAMCF for tracking crossing targets in combination with the models for the centroid and offset measurements. Even though the centroid offset measurement requires more computations and a more complex model for estimation, it yields significantly better results if the filter accounts for its colored measurement noise     

Application of Road Information in Ground Moving Target Tracking

A new algorithm is developed to achieve accurate state estimation in ground moving target tracking by means of using road information. It is an adaptive variable structure interacting multiple model estimator with dynamic models modification （DMM VS-IMM for short）. Firstly, road information is employed to modify the target dynamic models used by filter, including modification of state transition matrix and process noise. Secondly, road information is applied to update the model set of a VS-IMM estimator. Predicted state estimation and road information are used to locate the target in the road network on which the model set is updated and finally IMM filtering is implemented. As compared with traditional methods, the accuracy of state estimation is improved for target moving not only on a single road, but also through an intersection. Monte Carlo simulation demonstrates the efficiency and robustness of the proposed algorithm with moderate computational loads.     

Ground target tracking with variable structure IMM estimator

In this paper we present the design of a Variable Structure Interacting Multiple Model (VS-IMM) estimator for tracking groups of ground targets on constrained paths using Moving Target Indicator (MTI) reports obtained from an airborne sensor. The targets are moving along a highway, with varying obscuration due to changing terrain conditions. In addition, the roads can branch, merge or cross-the scenario represents target convoys along a realistic road network with junctions, changing terrains, etc. Some of the targets may also move in an open field. This constrained motion estimation problem is handled using an IMM estimator with varying mode sets depending on the topography, The number of models in the IMM estimator, their types and their parameters are modified adaptively, in real-time, based on the estimated position of the target and the corresponding road/visibility conditions. This topography-based variable structure mechanism eliminates the need for carrying all the possible models throughout the entire tracking period as in the standard IMM estimator, significantly improving performance and reducing computational load. Data association is handled using an assignment algorithm. The estimator is designed to handle a very large number of ground targets simultaneously. A simulated scenario consisting of over one hundred targets is used to illustrate the selection of design parameters and the operation of the tracker. Performance measures are presented to contrast the benefits of the VS-IMM estimator over the Kalman filter and the standard IMM estimator, The VS-IMM estimator is then combined with multidimensional assignment to gain “time-depth.” The additional benefit of using higher dimensional assignment algorithms for data association is also evaluated     

Multitarget tracking using the joint multitarget probability density

This work addresses the problem of tracking multiple moving targets by recursively estimating the joint multitarget probability density (JMPD). Estimation of the JMPD is done in a Bayesian framework and provides a method for tracking multiple targets which allows nonlinear target motion and measurement to state coupling as well as nonGaussian target state densities. The JMPD technique simultaneously estimates both the target states and the number of targets in the surveillance region based on the set of measurements made. We give an implementation of the JMPD method based on particle filtering techniques and provide an adaptive sampling scheme which explicitly models the multitarget nature of the problem. We show that this implementation of the JMPD technique provides a natural way to track a collection of targets, is computationally tractable, and performs well under difficult conditions such as target crossing, convoy movement, and low measurement signal-to-noise ratio (SNR).     

Data fusion and tracking using HMMs in a distributed sensor network

This work deals with the problem of multiple target tracking, from the measurements made on a field of passive sonars activated by an active sonar (multistatic network). The difficulties encountered then are of two kinds: each sensor alone does not provide full observability of a target, and multiple, possibly maneuvering targets moving in a cluttered environment must be dealt with. The algorithm presented here is based on a discrete Markovian modelization of the targets evolution in time. It starts with a fusion of the detections obtained at each measurement time. Tracking and target motion analysis (TMA) are next achieved thanks to dynamic programming (DP). This approach leads to multiple and maneuvering target tracking, with few assumptions; for instance, the use of deterministic target state models are avoided. Simulation results are presented and discussed.     

A pure-Cartesian formulation for tracking filters

A pure-Cartesian formulation is presented for angle-only and angle-plus-range tracking filters. Unlike conventional angle-only filters, which use target elevation and bearing as measurements, the filter expresses the sensor measurements in Cartesian coordinates. Consequently, the filter performs equally well for any line-of-sight (LOS) geometry, even when target elevation approaches or is equal to ±90°     

改进的MMPHD机动目标跟踪方法

基于序列蒙特卡罗方法的经典多模概率假设密度滤波方法及其各种衍生方法,在预测过程中依据多个并行的状态转移模型,通过将大量粒子散布到下一时刻目标所有可能出现的状态空间实现目标状态的捕获,造成计算量大、目标跟踪精度差。为此,提出一种改进的多模粒子概率假设密度机动目标跟踪方法。该方法利用最新量测信息估计目标运动模型概率及模型参数,并将估计得到的目标模型应用到粒子概率假设密度滤波方法的预测过程中生成预测粒子,从而将大部分粒子聚合在目标最可能出现的状态空间邻域中,实现粒子的有效利用。数值仿真表明,所提方法不仅显著地减少了目标丢失个数,而且提高了目标跟踪精度。     

Broadband passive acoustic technique for target motion parameterestimation

A nonlinear least-squares method is formulated to estimate the motion parameters of a target whose broadband acoustic energy emissions are received by a ground-based array of sensors. This passive technique is applied to real acoustic sensor data recorded during the passage of a variety of ground vehicles past a planar cross array and its effectiveness verified by comparing the results with the actual values of the target motion parameters. The technique cam also be applied to airborne targets     

Suboptimal filter design with pseudomeasurements for targettracking

A suboptimal Kalman filter design method is presented for the problem of tracking a maneuvering target. The design method is essentially based on linear target dynamics and linear-like structured measurements called pseudomeasurements. The pseudomeasurements are obtained by manipulating the original nonlinear measurements algebraically. The resulting filter has computational advantages over other filters with similar performance. Also, a variant of the Berg model is proposed as a target acceleration model under the assumption of a coordinated turn maneuver. The proposed model is consistent with the underlying assumption. Monte Carlo computer simulation results are included to demonstrate the effectiveness of the proposed suboptimal filter associated with the target acceleration model     

Adaptive Tracker Field-of-View Variation Via Multiple Model Filtering

Adaptive estimation using multiple model filtering is investigated as a means of changing the field of view as well as the bandwidth of an infrared image tracker when target acceleration can vary over a wide range. The multiple models are created by tuning filters for best performance at differing conditions of exhibited target behavior and differing physical size of their respective fields of view. Probabilistically weighted averaging provides the adaptation mechanism. Each filter involves online identification of the target shape function, so that this algorithm can be used against ill-defined and/or multiple-hot-spot targets. When each individual filter has the form of an enhanced correlator/linear Kalman filter, computational loading is very low. In contrast, an extended Kalman filter processing the raw infrared data directly and assuming a nonlinear constant turn-rate dynamics model provides superior tracking capability, especially for harsh maneuvers, at the cost of a larger computational burden.     

Moving Targets Processing in SAR Spatial Domain

This paper presents a novel technique to estimate the initial coordinates and velocity vector of moving targets, including those with velocities above the Nyquist limit, using a single synthetic aperture radar (SAR) sensor without increasing the pulse repetition frequency (PRF). The basic reasoning is that, although the returned echoes may be undersampled in the azimuth direction, their phase and amplitude are informative with respect to the moving target trajectory parameters. Therefore, the so-called blind angle ambiguity, inherent to systems using a single SAR sensor, is overcome. The proposed method samples the data in the spatial domain, along the signature curve which depends on the moving target trajectory parameters. The resulting algorithm is a highly efficient (from the computational point of view) ID matched filter. The effectiveness of the proposed scheme is illustrated using simulated SAR data and real data from the MSTAR public release data set, corresponding to a static SAR scene and a static BTR-60 with simulated motion.