Noise-correlating radar based on retrodirective antennas

A new retrodirective antenna-based search radar system has been introduced. The suggested system uses a noise correlation technique to detect the presence and the direction of the target. Simulation and analytical results show an order of magnitude improvement in acquisition time of the radar when compared with a phased array antenna-based radar system with the same specifications, except transmit power. To the best knowledge of the authors, no radar of a comparable acquisition time has been designed to this date. Power versus acquisition time tradeoff has been compared with a phased array radar for evaluating performance of the system. The radar is self-tracking due to retrodirectivity of the antenna array, and is much easier to implement, as it does not require any phase shifters etc.     

雷达对抗仿真系统中雷达数据库设计与实现

针对当前对雷达对抗系统效能评估的需求和仿真技术的发展,提出基于HLA的雷达对抗仿真系统总体结构及其数据库设计,重点阐述应用面向对象思想的雷达数据库设计,并在VC环境下采用ADO技术访问数据库;最后分析说明一个雷达对抗仿真系统的仿真实例。该系统已应用于工程项目中,取得了较好的效果。     

Effectiveness of MMW aerosols in defeating a battlefieldsurveillance radar: field demonstration preliminary results

The US Army ERDEC is developing advanced aerosol systems to combat threat surveillance, fire control, and seeker systems operating in the visible, infrared, and millimeter wave portions of the electromagnetic spectrum. One such system is the M56 multispectral smoke generator, which presently operates in the visible and infrared portions of the spectrum; a millimeter wave (MMW) Module is in development to extend the M56 spectral range. This paper documents preliminary results of a field demonstration test of the M56 MMW Module. An MMW instrumentation radar was modified to simulate the scan pattern and radar parameters of a tactical battlefield surveillance radar system. A test grid was populated with both stationary and moving tactical targets, and the radar scanned the grid to simulate a surveillance radar in operation. Once a realistic tactical engagement scenario was developed, MMW aerosols were deployed to demonstrate the impact such aerosols could have on radar detection and classification performance     

Noncoherent approach to through-the-wall radar localization

A noncoherent through-the-wall radar system approach, based on stepped-frequency signal synthesis and trilateration technique, is presented. This approach involves multiple independent monostatic radar units and as such, provides flexibility in positioning the units with various standoff distances and inter-element spacing. The performance of the proposed noncoherent localization system was demonstrated using simulated and real data. The results show that the radar is able to detect and locate multiple targets behind walls     

基于FPGA的雷达信号模拟、采集与处理系统

介绍了基于FPGA设计并实现了一种雷达信号模拟、采集与处理的系统。系统主要由计算机和带有双路高速A/D和双路高速D/A的信号处理卡组成。信号处理卡以FPGA为核心控制与处理芯片,主要完成雷达信号模拟、雷达信号处理和雷达信号采集等功能,与计算机通讯使用USB2.0接口,采用数据抽取、坐标查表映射和DirectDraw等技术在计算机显示器上以P显和A显方式进行实时显示。该系统提供在线配置功能,用户可通过USB接口对FPGA程序进行配置或升级,无须专用配置芯片,简化了电路板设计,提高了系统的灵活性。     

一种半实物雷达仿真测试系统的设计与实现

雷达半实物仿真是通过微电子技术、计算机技术和信号处理技术等各种技术来复现雷达信号的产生、传递等动态过程,作为雷达系统测试的有效手段,半实物雷达在雷达系统的研制和调试过程中具有重要作用,半实物雷达仿真测试更是系统功能实现的关键环节。文章基于半实物雷达系统对射频信号发生模块、试验数据采集模块、数据回放模块进行结构与参数的设计,最终完成了各个模块的开发与集成,实现了半实物雷达仿真测试系统的设计。     

Statistical Technique for Radar Amplitude Calibration

A statistical technique for amplitude calibration of radar systems is presented. As distinct from the input-output crosscorrelation measurement of a linear system impulse response [1], this technique measures the amplitude transfer function of a memoryless, nonlinear system. A generalized theory is developed and calibration accuracy bounds are derived. Used in the calibration of a modern pulsed radar, the technique is compared with conventional reference pulse calibration. The relative merits of the deterministic and statistical approaches are compared.     

Electrical power distribution on space based radar satellites

The radar payload on a space-based radar (SBR) satellite could require tens of kilowatts of power distributed to many small loads over a large area. This poses special problems for the power distribution and control system (PDCS). A study that examined the power requirements of an SBR spacecraft is reported. A baseline prime power system, generating about 30 kW, was derived. The proposed distribution network would transmit 240 V at 20 kHz. The voltage would be downconverted in one converter for about 100 transmit/receive modules. The design considerations are discussed, and the baseline PDCS is described     

机载气象雷达回波信号仿真系统

设计了一个机载气象雷达回波信号仿真系统,可用于高保真雷达回波信号的生成与演示。基于高保真风场建模数据,依照真实机载气象雷达的扫描方式初始化仿真参数,对风场数据进行机载气象雷达回波仿真,得到了可靠的仿真数据,并对可靠性进行验证。该系统采用C#与Matlab联合编程的方法进行实现,可实现的功能包括各种气象目标在不同模式下的雷达回波仿真,雷达回波数据正确性的验证及展示。得到的信号可为机载气象雷达信号处理和数据处理算法的开发提供数据支持。     

Side zone automotive radar

Side Detection System (SDS) based on radar technology for automotive applications is introduced. The functional requirements of such a system are described and the resulting safety enhancement benefits are summarized. Also, the nature of the radar environment for the side zone application is reviewed in qualitative terms. Minimizing cost is a necessary system design driver, and presents a considerable challenge for radar designs in all but the most primitive capability cases. A cost effective design approach and radar system architecture which solves the side zone application problem of separating potentially hazardous target returns from exorbitant amounts of clutter are discussed in some detail. This design has been in road test for several months, and has achieved enthusiastic customer acceptance     

Radio Interference in Helicopter-Borne Pulse Doppler Radars

Radio interference generated in a helicopter-borne pulse Doppler radar system due to rotating blades is analyzed for the case that blades are located in the far field region of the radar antenna. A first-order estimate of the blade interference power spectrum is obtained as a function of antenna depression angle and radar (helicopter) altitude and speed. Numerical calculations show that blade interference is very weak compared with the direct ground clutter. It extends, however, into the clutter-free region which causes false alarms and degrades the radar performance.     

飞行器雷达隐身性能评估研究

考虑飞行器与雷达的对抗环境和相对位置关系,通过建立雷达的探测模型以及飞行器的雷达散射特性模型,初步构建了飞行器雷达隐身性能评估系统。该系统可以有效地计算RCS的不同而引起的发现概率及暴露距离的变化,从而可以定量地比较隐身性能的变化;还可以根据暴露距离或预警时间的要求,制定出满足该要求的RCS指标的取值,从而指导隐身飞机RCS指标的确定。对算例的计算分析表明,该系统的计算结果可信,具有一定的实用价值。     

CTD MTI Radar Filter with Charge-Transfer Inefficiency Compensation

The design and implementation of a second-order nonrecursive moving target indication (MTI) radar filter using commercially available charge-transfer devices as delay lines are described. A simple technique is included to compensate for the device charge-transfer in-efficiency and its sensitivity is analyzed. Experimental laboratory tests and results in an operating radar system are reported showing the good performance of the realized MTI radar filter.     

Hardware-in-the-loop simulation technology of wide-band radar targets based on scattering center model

Hardware-in-the-loop(HWIL) simulation technology can verify and evaluate the radar by simulating the radio frequency environment in an anechoic chamber. The HWIL simulation technology of wide-band radar targets can accurately generate wide-band radar target echo which stands for the radar target scattering characteristics and pulse modulation of radar transmitting signal. This paper analyzes the wide-band radar target scattering properties first. Since the responses of target are composed of many separate scattering centers, the target scattering characteristic is restructured by scattering centers model. Based on the scattering centers model of wide-band radar target, the wide-band radar target echo modeling and the simulation method are discussed. The wide-band radar target echo is reconstructed in real-time by convoluting the transmitting signal to the target scattering parameters. Using the digital radio frequency memory(DRFM) system,the HWIL simulation of wide-band radar target echo with high accuracy can be actualized. A typical wide-band radar target simulation is taken to demonstrate the preferable simulation effect of the reconstruction method of wide-band radar target echo. Finally, the radar target time-domain echo and high-resolution range profile(HRRP) are given. The results show that the HWIL simulation gives a high-resolution range distribution of wide-band radar target scattering centers.     

Millimeter wave safety warning system for in-vehicle signing

Georgia Tech Research Institute (GTRI) has developed a millimeter wave safety warning system for in-vehicle signing for use in the nation's Intelligent Transportation System (ITS, formerly IVHS). The Safety Warning System TU (SWS) utilizes a homodyne radar that operates at 24.1 GHz as both a radar and a system to transmit highway safety messages. The warning message is received by a police radar detector or stand-alone safety warning receiver without radar detector capability. When the message is received, it is displayed to the driver via an alphanumeric light emitting diode (LED) display. The message can also be announced by a voice synthesizer internal to the receiver or by a flashing LED labeled “SWS.” The system is designed to inform the driver that he or she is being overtaken by a police car or emergency vehicle in motion. When the police car or emergency vehicle stops, the radar transmitter senses that the platform is no longer moving and the system automatically changes its message to warn approaching drivers of a stationary hazard ahead. A second safety warning transmitter deployment concept is to mount the unit near the highway at a fixed location. The fixed location SWS is designed to be programmable and transmit any one of 64 fixed text messages     

软件化雷达发射系统设计

讨论了实现软件化雷达发射系统的一种方法;给出了软件化雷达发射系统的数学模型;给出了产生基带波形的几种设计方案以及几种雷达信号调制算法及软件实现设计图。     

STAP with medium PRF mode for non-side-looking airborne radar

Space-time adaptive processing (STAP) has been widely discussed for airborne radar systems to improve the system performance of detecting targets. This is especially true for airborne early warning (AEW) radar, which should find long-range and small radar cross section (RCS) targets such as the stealth aircraft and missiles. However, in existing airborne radar literature, STAP is mainly considered for clutter and jamming rejection in side-looking airborne radar (SLAR) applications. There have been fewer discussions on airborne radar with non-side-ways looking array radar (non-SLAR). The STAP of non-SLAR such as forward looking array radar is also very important and can not be avoided for airborne radar to detect targets in all directions. The STAP of the non-SLAR is studied here. A scheme has been proposed, which is processed by the way of STAP combined with multiple staggered medium pulse repetition frequencies (PRFs). We further study the selection of PRFs in order to make the scheme more available for non-SLAR radar. We analyze two typical non-SLAR cases, i.e., inclined-sideways looking array and forward looking array. We examine this scheme by comparing the performances of three processing systems under the criteria of range-velocity blind zone minimization. Computer simulation results show the multiple-PRFs STAP scheme is feasible for non-SLAR and can be applied to phased-array AEW radar systems     

基于OTR和SHT的射频隐身雷达信号设计

为了提高雷达的射频(RF)隐身性能,结合最优匹配照射-接收机(OTR)理论与序贯假设检验(SHT)方法,提出了一种新的射频隐身雷达信号设计方法。通过发射信号了解外界环境信息,然后反馈这些信息给雷达系统,系统根据这些信息自适应设计雷达发射信号,形成一个闭环系统。以雷达目标识别为具体应用,实验仿真表明,设计的雷达信号自适应变化,减小了信号间的相关性,并且减少了照射次数,降低了辐射功率,从而实现了雷达系统的射频隐身性能。     

Electrical power on a 30 kW space-based radar satellite

An electrical power system for a space-based radar satellite is described. When the radar is on, its transmitter needs an average DC power of 30 kW. The problem of distributing the power efficiently in pulses to many transmit/receive modules is addressed. System requirements include a high-voltage battery and transmission line, load-sharing between the solar array, and the battery during sunlit periods, and a 25-kW solar array. A scaled-down version of the power system for a proof-of-concept demonstration is described