共查询到20条相似文献,搜索用时 78 毫秒
1.
加速度计是惯性导航系统的核心部件,通常加速度计的输出信号为模拟电流,为便于导航计算机对采集数据解算处理,需经过I/F(电流/频率)转换电路。为满足某惯导系统对大比例系数加速度信号采集转换的要求,在经典I/F电路的基础上结合FPGA+A/D设计了一种比例系数大于90000脉冲/(s·mA),量程为6mA的电流频率转换电路,同时转换电路支持串口输出。通过对该大比例系数I/F转换电路的温度特性、线性度、零位稳定性等指标的测试,表明该电路性能良好,有利于进一步拓展应用范围。 相似文献
2.
3.
4.
5.
针对某型发动机电子控制器,对航空发动机分布式控制系统进行了初步研究。设计了1种基于分布式控制,用AD598、TMS320F2812 DSP和CAN总线构成的航空发动机智能导叶控制装置。阐述了智能导叶控制装置的壳体设计方法,以及TMS320F2812最小系统、基于AD598的LVDT(线性可变差动变压器)信号调理电路、电液伺服阀电流驱动电路(电流输出电路)、CAN总线接口电路和D/A转换模块等电路的设计方法,简述了软件系统设计。通过完成半物理试验,基本满足了对风扇进口可调叶片角度α1、高压压气机进口可调静子叶片角度α2的控制要求。结果表明:该装置具备体积小、智能化程度高、控制效果好等特点。 相似文献
6.
为了在高动态条件下对惯导系统工具误差进行在线估计,提出了基于卫星导航接收机原始测量信息的惯导/卫星导航深组合导航滤波方法,该方法是以卫星导航接收机伪距和伪距率作为观测量,对惯导系统位置、速度、姿态角和陀螺、加速度计零位等误差进行实时估计,并进行闭环补偿,解决了惯导系统长航时使用时,惯导系统误差随时间快速发散等问题。经理论仿真和试验验证,该方法可以有效地抑制惯导系统误差,具有工程实用价值。 相似文献
7.
8.
顾贵芬 《中国民航学院学报》2005,23(Z1):143-144
提出了采用多千斤顶液压系统推动运动台给钢丝绳施加载荷,通过压力传感器和位移传感器来测量千斤顶的内腔压力值和顶杆伸出量,多个通道的传感器信号通过多路开关、采样保持器S/H、A/D模数转换、最后由8155I/O接口输入到单片机,实现对系统的数据采集.系统设计了传感器、多路开关、采样保持器S/H、A/D模数转换、硬件接口电路以及数据采集子程序. 相似文献
9.
10.
在介绍飞机任务系统训练模拟器原理的基础上,阐述了基于PC/104嵌入式计算机的飞机惯导模拟器的研制方案,给出了模拟系统的硬件电路框图和软件程序结构图,并与飞机任务系统训练模拟器进行了组网导航训练测试,测试结果显示该模拟系统性能稳定,简单可靠,满足设计要求。 相似文献
11.
有翼高超声速再入飞行器气动设计难点问题 总被引:2,自引:1,他引:2
有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。 相似文献
12.
13.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
14.
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
15.
LUO Cheng LIU Hua YANG Jia-ling LIU Kai-xin 《中国航空学报》2007,20(3):230-235
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks. 相似文献
16.
17.
波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面:电子化(e-Enabled)运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境(GCE)。 相似文献
18.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
19.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
20.
临近空间飞行器测控与信息传输系统频段选择 总被引:7,自引:0,他引:7
临近空间飞行器是高性能信息化武器平台,测控(TT&;C)与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联(ITU)国际标准、高速数传、接收信噪比(SNR)、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。 相似文献