Spacelab concept and its utilization for science

The first part of the paper is devoted to the presentation of the Spacelab concepts, for which detailed design studies are at present being carried out by ESRO. The second part concentrates on the utilization of the Spacelab for the various fields of science, namely: (1) Atmospheric and space plasma physics, (2) Astronomy and astrophysics, (3) Material science and (4) Life sciences. The advantages of using the Spacelab for observations in these fields as compared to conventional automated satellites are highlighted.     

The cost benefits of the Spacelab system to scientific investigations and space applications

In the past, one of the major problems in performing scientific investigations in space has been the high cost of developing, integrating, and transporting scientific experiments into space. The limited resources of unmanned spacecraft, coupled with the requirements for completely automated operations, was another factor contributing to the high costs of scientific research in space. In previous space missions after developing, integrating and transporting costly experiments into space and obtaining successful data, the experiment facility and spacecraft have been lost forever, because they could not be returned to earth. The objective of this paper is to present how the utilization of the Spacelab System will result in cost benefits to the scientific community, and significantly reduce the cost of space operations from previous space programs.The following approach was used to quantify the cost benefits of using the Spacelab System to greatly reduce the operational costs of scientific research in space. An analysis was made of the series of activities required to combine individual scientific experiments into an integrated payload that is compatible with the Space Transportation System (STS). These activities, including Shuttle and Spacelab integration, communications and data processing, launch support requirements, and flight operations were analyzed to indicate how this new space system, when compared with previous space systems, will reduce the cost of space research. It will be shown that utilization of the Spacelab modular design, standard payload interfaces, optional Mission Dependent Equipment (MDE), and standard services, such as the Experiment Computer Operating System (ECOS), allow the user many more services than previous programs, at significantly lower costs. In addition, the missions will also be analyzed to relate their cost benefit contributions to space scientific research.The analytical tools that are being developed at MSFC in the form of computer programs that can rapidly analyze experiment to Spacelab interfaces will be discussed to show how these tools allow the Spacelab integrator to economically establish the payload compatibility of a Spacelab mission.The information used in this paper has been assimilated from the actual experience gained in integrating over 50 highly complex, scientific experiments that will fly on the Spacelab first and second missions. In addition, this paper described the work being done at the Marshall Space Flight Center (MSFC) to define the analytical integration tools and techniques required to economically and efficiently integrate a wide variety of Spacelab payloads and missions. The conclusions reached in this study are based on the actual experience gained at MSFC in its roles of Spacelab integration and mission managers for the first three Spacelab missions. The results of this paper will clearly show that the cost benefits of the Spacelab system will greatly reduce the costs and increase the opportunities for scientific investigation from space.     

Comparison of the effects induced by the ordinary (O-mode) and extraordinary (X-mode) polarized powerful HF radio waves in the high-latitude ionospheric <Emphasis Type="Italic">F</Emphasis> region

Using the results of coordinated experiments on the modification of the high-latitude ionosphere by powerful HF radio emission of the EISCAT/Heating facility, effects of the impact of powerful HF radio waves of the ordinary (O-mode) and extraordinary (Х-mode) polarization on the high-latitude ionospheric F region have been compared. During the experiments, a powerful HF radio wave was emitted in the magnetic zenith direction at frequencies within the 4.5–7.9 MHz range. The effective power of the emission was 150–650 MW. The behavior and characteristics of small-scale artificial ionospheric irregularities (SAIIs) during O- and X-heating at low and high frequencies are considered in detail. A principal difference has been found in the development of the Langmuir and ion–acoustic turbulence (intensified by the heating of the plasma and ion–acoustic lines in the spectrum of the EISCAT radar of incoherent scatter of radio waves) in the О- and Х-heating cycles after switching on the heating facility. It has been shown that, under the influence on the ionospheric plasma of a powerful HF radio wave of the Х-polarization, intense spectral components in the spectrum of the narrow-band artificial ionospheric radio emission (ARI) were registered at distances on the order of 1200 km from the heating facility.     

Microgravity measurement assembly (MMA) for spacelab module missions

The microgravity measurement assembly (MMA) is a precision measurement facility for ground and on-orbit disturbance accelerations on board Spacelab, being currently under development by MBB/ERNO under DFVLR contract. MMA is using a new generation of micromechanical acceleration detectors developed by CSEM under ESTEC contract. Small dimensions of the triaxial sensor packages allow for installation very close to scientific experiments; mass is significantly reduced compared to conventional systems. Six or more of these mini-sensor packages are installed at the most g-sensitive experiments of Spacelab Module Missions. Acceleration and housekeeping data are processed in real time by a dedicated microcomputer and transmitted to the ground. Thus, for the first time, synchronized and comparable precision acceleration data are available in real time on ground for on-line judgement of the microgravity environment desired for experiment success, offering the possibility, for example of experiment repetition in case of excessive g-disturbances. Furthermore, MMA allows for immediate feedback to the crew concerning the microgravity effects of their dynamic behavior, with the aim of crew training towards lower disturbances. An additional mobile sensor package can be installed at vibration sources, e.g. pumps, centrifuges etc. or any arbitrary location inside the Spacelab Module. An impact hammer can be used together with MMA in order to measure in-flight structural transfer functions. The MMA on-board system and ground station and its planned utilization for the German Spacelab Mission D-2 is described.     

Using Spacelab as a precursor of science operations for the Space Station

For more than 15 years, Spacelab, has provided a laboratory in space for an international array of experiments, facilities, and experimenters. In addition to continuing this important work, Spacelab is now serving as a crucial stepping-stone to the improved science, improved operations, and rapid access to space that will characterize International Space Station. In the Space Station era, science operations will depend primarily on distributed/remote operations that will allow investigators to direct science activities from their universities, facilities, or home bases. Spacelab missions are a crucial part of preparing for these activities, having been used to test, prove, and refine remote operations over several missions. The knowledge gained from preparing these Missions is also playing a crucial role in reducing the time required to put an experiment into orbit, from revolutionizing the processes involved to testing the hardware needed for these more advanced operations. This paper discusses the role of the Spacelab program and the NASA Marshall Space Flight Center- (MSFC-) managed missions in developing and refining remote operations, new hardware and facilities for use on Space Station, and procedures that dramatically reduce preparation time for flight.     

Life support system development in West Germany

The delivery of fully qualified Environmental Control and Life Support System (ECLS) flight hardware for the Spacelab Flight Unit was completed in 1979, and the first Spacelab flight is scheduled for mid 1983.

With Spacelab approaching its operational stage, ESA has initiated the Follow-on Development Programme. The future evolution of Spacelab elements in a continued U.S./European cooperation is obviously linked to the U.S. STS evolution and leads from the sortie-mode improvements (Initial Step) towards pallet systems and module applications in unmanned and manned space platforms (Medium and Far Term Alternatives).

Extensive studies and design work have been accomplished on life support systems for Life Sciences Laboratories (Biorack) in Spacelab (incubators and holding units for low vertebrates).

Future long term missions require the implementation of closed loop life support systems and in order to meet the long range development cycle feasibility studies have been performed. Terrestrial applications of the life support technologies developed for space have been successfully implemented.     

红外加热棒式外热流模拟器在航天器真空热试验中的性能分析

基于红外加热棒的稳态传热特性,建立了红外加热棒式外热流模拟器的计算模型,对其加热能力及效果进行计算分析。以实际红外加热棒式外热流模拟器为对象开展了试验验证,对模拟器的温度响应特点、加热能力进行了全面测试。结果表明,该种红外模拟器温度响应速度快,加热棒覆盖率、阻值可调整范围大,使得其加热能力设计灵活度高,能够适应航天器真空热试验的使用需求。     

Potential cost reductions for three STS/Spacelab mission modes

Based on the results of studies carried out by ESA several possibilities are discussed to achieve mission cost reductions for large Spacelab instrument facilities as compared to their flight on several 7-day duration Spacelab missions. As an example three scientific telescope facilities are selected (LIRTS, EXSPOS, GRIST) which are defined to a Phase A level.Three new mission modes are considered:

&#x02022; —Shuttle attached Spacelab mission mode with extended flight duration (up to 30 days) for which the application of planned capability extensions and new elements of the STS/Spacelab (e.g. Short Spacelab Pallets, Power Extension Package) are investigated.

&#x02022; —Shuttle deployed mission mode, for which the telescope, accommodated on a Spacelab pallet, is docked to the Power Module, a new element of the Space Transportation System under study by NASA.

&#x02022; —Free-flying mission mode, for which Shuttle launched dedicated missions of the facilities are considered, assuming varying degrees of autonomy with respect to supporting services of the Shuttle.

Reduction of costs have been considered on the levels of single mission cost and total programme cost. Fundamentally the charges for the instrument can be reduced by constraining the mass/volume factors with respect to the Shuttle capability. However, the instrument as part of a payload is only viable if an acceptable resource sharing including observation time can be achieved. Any single instrument will require several mission opportunities or one mission which achieves a similar or longer total observation programme.Based on an identification of instrument modifications of the Phase A baseline designs to favour cost reductions and on a derivation of technical requirements, constraints and finally budgetary cost comparisons an attempt is made to assess the advantages and disadvantages of the different mission modes.The favoured option for GRIST is a 2–3 weeks sortie mission followed after refurbishment by a longer Power Module docked mission. For LIRTS and EXSPOS the free-flying pallet modes are very attractive in terms of the longer durations achieved and in terms of cost per unit operating time.     

Cost effectiveness of Spacelab experiments

Spacelab permits investigation in new seicntific disciplines like material processing, life sciences, chemistry, etc. The large mass and volume capabilities of Spacelab offer better possibilities for some areas of traditional space sciences like infrared astronomy, multi-spectral solar observations and large instruments for astronomical observations.Since free-flyers will require normally a new spacecraft development for each mission, the reusability of space qualified components and experiments will be a significant cost reduction factor over a long period. In the early phase of Spacelab utilisation, however, the scaling factor introduced by Spacelab utilisation, however, the scaling factor introduced by Spacelab results in higher payload development costs than originally appreciated.The costs of Spacelab utilisation are computed and compared with those of conventional free-flying satellites. The mission implementation costs and experiment development costs are shown for both cases. The Spacelab mission implementation costs are subdivided into NASA charges for the Standard Shuttle Mission, NASA charges to fly and operate Spacelab, the European costs of Spacelab payload integration and experiment development costs. In order to evaluate and compare mission implementation costs, the simple parameters are adopted of the cost per kg of experiments and the data collection-transmission capability of Shuttle/Spacelab and ESRO/ESA satellites. The mission implementation costs turn out to be very favourable for Spacelab. The experiment development costs, which are not included in the mission implementation costs, are compared for several free flyers with the corresponding development costs for several experiments of the first Spacelab payload. The comparison shows that the cost per kg of Spacelab experiment development is about five times less than of satellite experiments.     

全尺寸全空域高超声速等效模拟器原理及概念设计

利用螺旋波电离加速并获得轴向速度约为5~10 km/s的等离子体束流,再经过电荷交换产生等速的定向高速气流。采用多束并联的工作方式模拟高速中性气流环境,实现对约0.5~3 m2的整个高超声速飞行器横截面积的覆盖,每一束气流的横截面积约为0.031 4 m2,其密度在1015~1021 m-3范围可调。基于多束并联工作原理的模拟器称之为全尺寸全空域等效模拟器,能够用于高超声速飞行器的气动力学、气动加热等的地面研究,所获得的测量数据更加符合实际飞行状态,也可以解决缩比模型实验的相似性原理差异等技术难题。     

多通道集成电路航天微波辐射计

简要介绍航天微波辐射计的用途，多通道集成电路航天微波辐射计的技术指标和设计原理，给出各主要部件技术参数和设计方法，其中包括天线、平衡混频器、波导至微带变换器、本机振荡器、中频和视频放大器、电源等，最后给出整机噪声系数的测试结果。     

Using computer graphics to enhance astronaut and systems safety.

Computer graphics is being employed at the NASA Johnson Space Center as a tool to perform rapid, efficient and economical analyses for man-machine integration, flight operations development and systems engineering. The Operator Station Design System (OSDS), a computer-based facility featuring a highly flexible and versatile interactive software package, PLAID, is described. This unique evaluation tool, with its expanding data base of Space Shuttle elements, various payloads, experiments, crew equipment and man models, supports a multitude of technical evaluations, including spacecraft and workstation layout, definition of astronaut visual access, flight techniques development, cargo integration and crew training. As OSDS is being applied to the Space Shuttle, Orbiter payloads (including the European Space Agency's Spacelab) and future space vehicles and stations, astronaut and systems safety are being enhanced. Typical OSDS examples are presented. By performing physical and operational evaluations during early conceptual phases. supporting systems verification for flight readiness, and applying its capabilities to real-time mission support, the OSDS provides the wherewithal to satisfy a growing need of the current and future space programs for efficient, economical analyses.     

Role of the astronaut in operating the Advanced Fluid Physics Module

The role of man in space is investigated in the operation of the Advanced Fluid Physics Module (AFPM), a scientific instrument dedicated to fluid physics research in a microgravity environment and flown on the Spacelab D2 mission. The astronaut involvement is addressed by applying the criteria of the THURIS study, conducted by NASA for the optimization of future manned space flights. Outcomes of the THURIS study are first summarized. The AFPM characteristics and interfaces are briefly presented. The five experiments performed on board Spacelab D2 are introduced and the involvement of the astronaut is described. Finally, THURIS criteria are applied to an AFPM experiment scenario. Results show that, of all the activities involved in the AFPM nominal operation, two thirds are related to hardware manipulation and to procedure following, while the last third uses the unique astronaut intellectual capabilities, making his presence in orbit mandatory for successful experiment completion.     

高压太阳电池阵静电放电产生脉冲信号的特性研究

研究高压太阳电池阵静电放电产生脉冲信号的特性,有助于深入了解太阳电池阵充放电形成机制。在试验中,利用电子枪模拟GEO空间带电环境,辐照太阳电池样品表面。利用电流探头CT-2、单极子天线和数字存储示波器测量静电放电所产生的脉冲电流、辐射电场并记录其波形。试验结果表明:太阳电池在静电放电过程中产生了脉冲宽度为几μs的瞬态电流,其峰值幅度为几A;辐射电场的脉冲信号持续时间几百ns至几个μs,其峰值幅度达数百V/m。脉冲信号的时域特征表现为脉冲群,其波形具有陡峭的前沿,能量分布的频率范围主要集中在0.1~50 MHz之间。最后根据上述研究对在轨静电放电测试仪的设计提出建议。     

Modelling and simulation of the space mission MICROSCOPE

MICROSCOPE is a French space mission for testing the weak equivalence principle (WEP). The mission goal is the determination of the Eötvös parameter $\eta$ with an accuracy of 10^?15. The French space agency CNES is responsible for the satellite which is developed and produced within the Myriade series. The satellite's payload T-SAGE (Twin Space Accelerometer for Gravitation Experimentation) is developed and built by the French institute ONERA. It consists of two high-precision capacitive differential accelerometers. One accelerometer is used as reference sensor with two test masses of platinum, the science sensor contains a platinum and a titanium proof mass. The detection of the test mass movement and their control is done via a complex electrode system. As a member of the MICROSCOPE performance team, the German department ZARM will be involved in the data analysis of the MICROSCOPE mission. For this purpose, mission simulations and the preparation of the mission data evaluation in close cooperation with the French partners CNES, ONERA and OCA are realised. The development status of the simulation tool which will represent the complex spacecraft dynamics and all error sources in order to design and test data reduction procedures is presented and some features are discussed in detail.     

Ground based ISS payload microgravity disturbance assessments

In order to verify that the International Space Station (ISS) payload facility racks do not disturb the microgravity environment of neighboring facility racks and that the facility science operations are not compromised, a testing and analytical verification process must be followed. Currently no facility racks have taken this process from start to finish. The authors are participants in implementing this process for the NASA Glenn Research Center (GRC) Fluids and Combustion Facility (FCF). To address the testing part of the verification process, the Microgravity Emissions Laboratory (MEL) was developed at GRC. The MEL is a 6 degree of freedom inertial measurement system capable of characterizing inertial response forces (emissions) of components, sub-rack payloads, or rack-level payloads down to 10(-7) g's. The inertial force output data, generated from the steady state or transient operations of the test articles, are utilized in analytical simulations to predict the on-orbit vibratory environment at specific science or rack interface locations. Once the facility payload rack and disturbers are properly modeled an assessment can be made as to whether required microgravity levels are achieved. The modeling is utilized to develop microgravity predictions which lead to the development of microgravity sensitive ISS experiment operations once on-orbit. The on-orbit measurements will be verified by use of the NASA GRC Space Acceleration Measurement System (SAMS). The major topics to be addressed in this paper are: (1) Microgravity Requirements, (2) Microgravity Disturbers, (3) MEL Testing, (4) Disturbance Control, (5) Microgravity Control Process, and (6) On-Orbit Predictions and Verification.     

立式混合机桨叶运动轨迹分析

介绍利用坐标变换原理建立双桨行星立式混合机桨叶运动轨迹数学模型的方法及利用计算机绘制桨叶运动轨迹的技术，并以该数学模型分析了空心桨叶棱边与锅壁最小间隙的分布规律，同时分析了公转和自转变比不同时，桨叶和锅壁间死区对被混物料混合效果的影响     

Suppression of auroral kilometric radiation by an HF heating facility

The results of a joint experiment using the Tromsø heating facility and the INTERBALL-2 satellite are presented. It is shown that fluxes of accelerated ionospheric electrons reach an altitude of 11200 km, suppressing the auroral kilometric radiation. The timescales of the observed phenomena are estimated and possible physical mechanisms are discussed.     

Stability of resonance rotation of a satellite with respect to its center of mass in the orbit plane

The stability of resonance oscillations and rotations of a satellite in the plane of its orbit in the case when the difference of the moments of inertia with respect to the principal axes lying in the orbit plane is small is determined at a given rotation number m by the sign of function Φ_m(e), introduced by F.L. Chernous’ko in 1963. In this paper, convenient analytical representations of functions Φ_m(e) are described in the form of integrals and series of Bessel functions regular at e → 1^?. Values of Φ_m(1) are calculated in explicit form. A theorem about the double asymptotic form of functions Φ_m(e) at m → ∞ and e → 1^? is proved by the saddlepoint method.