Third-Order Loop Filter Design for Acceleration-Rate Tracking

A perfect third-order loop filter design that can be implemented as a digital filter is obtained which minimizes the noiseless steady-state acceleration rate (jerk) error for a fixed loop noise bandwidth. Simulations were performed to obtain transient responses of the third-order loop plus a sample fourth-order loop under a jerk input. The results enable one to obtain a loop design that minimizes the loop noise bandwidth required for a given steady-state jerk error and thus obtain better noise jitter performance.     

A Tracking Filter in Spherical Coordinates Enhanced by De-noising of Converted Doppler Measurements

Tracking problem in spherical coordinates with range rate (Doppler) measurements, which would have errors correlated to the range measurement errors, is investigated in this paper. The converted Doppler measurements, constructed by the product of the Doppler measurements and range measurements, are used to replace the original Doppler measurements. A de-noising method based on an unbiased Kalman filter (KF) is proposed to reduce the converted Doppler measurement errors before updating the target states for the constant velocity (CV) model. The states from the de-noising filter are then combined with the Cartesian states from the converted measurement Kalman filter (CMKF) to produce final state estimates. The nonlinearity of the de-noising filter states are handled by expanding them around the Cartesian states from the CMKF in a Taylor series up to the second order term. In the mean time, the correlation between the two filters caused by the common range measurements is handled by a minimum mean squared error (MMSE) estimation-based method. These result in a new tracking filter, CMDN-EKF2. Monte Carlo simulations demonstrate that the proposed tracking filter can provide efficient and robust performance with a modest computational cost.     

一种基于三维到达角的无偏伪线性卡尔曼滤波

为了解决大场景下基于三维到达角的目标跟踪问题，提出了一种具有无偏性的伪线性卡尔曼滤波。首先，基于三维到达角信息对目标运动模型与量测模型进行建模；之后，对量测模型进行了伪线性化处理，得到了线性形式的目标量测模型。为了解决伪线性卡尔曼滤波存在的有偏性问题，提出了一种结合EKF（extend Kalman filter）的三维伪线性无偏卡尔曼滤波。仿真实验表明，该模型能够对非机动目标与机动目标有效跟踪，对于百公里级别的目标，当角测量误差从0.1°变化到0.5°，算法在仿真时间结束时均能将绝对位置误差降低至10 km以内，且算法的运行速度与EKF为同一个量级，同时兼顾了抗干扰能力、定位跟踪精度、运行效率的要求，能够为大场景下的目标跟踪提供有效方法。     

The Tracking Index: A Generalized Parameter for ? ? ? and ? ? ? ? Target Trackers

A generalized, optimal filtering solution is presented for the target tracking problem. Applying optimal filtering theory to the target tracking problem, the tracking index, a generalized parameter proportional to the ratio of the position uncertainty due to the target maneuverability to that due to the sensor measurement, is found to have a fundamental role not only in the optimal steady-state solution of the stochastic regulation tracking problem, but also in the track initiation process. Depending on the order of the tracking model, the tracking index solution yields a closed form, consistent set of generalized tracking gains, relationships, and performances. Using the tracking index parameter, an initializing and tracking procedure in recursive form, realizes the accuracy of the Kalman filter with an algorithm as simple as the well-known ? ? ? filter or ? ? ? ? ? filter depending on the tracking order.     

基于均值漂移无味粒子滤波的地面运动目标变结构交互多模型跟踪(英文)

为了跟踪地面运动目标,本文提出在变结构交互多模型基础上使用均值漂移无味粒子滤波的算法。模型滤波中,通过均值漂移将无味粒子滤波产生的采样粒子向目标状态最大后验密度估计方向移动。"停止"模型基础上,提出了"遮蔽"模型:出现地形遮蔽时,使用上一时刻的预测代替下一时刻的测量,且保持道路模型与遮蔽前一致。仿真实验采用地面运动目标指示雷达,考虑地面运动目标的三种常见场景:进入或离开道路、经过道路交叉点以及无测量值。使用了RMSE和ANEES两种评价指标,实验结果表明本文算法有效地提高了目标改变行驶道路时的跟踪精度;且目标速度过低或被遮蔽时,可以避免轨迹中断。     

Estimation of Aircraft Target Motion Using Orientation Measurements

A new approach to estimating motion of a highly maneuverable aircraft target in an air-to-air tracking scenario is presented. An interactive filter system is developed that provides an improved estimate of target motion states by conditioning kinematic filter estimates on target aspect angle data. Pattern recognition techniques used with an electrooptical tracker are presumed to provide this target aspect information. A target orientation filter processes the aspect angle measurements by statistically weighting measured aspect angles with the current best estimate of target kinematics. The aerodynamic lift equation is used to relate approximate angle of attack to target velocity and acceleration. A novel statistical model for aircraft target normal acceleration is also developed to represent better the unknown target accelerations. Simulation results of realistic three-dimensional scenarios are presented to evaluate the performance of the interactive filter system.     

Suboptimal filter design with pseudomeasurements for targettracking

A suboptimal Kalman filter design method is presented for the problem of tracking a maneuvering target. The design method is essentially based on linear target dynamics and linear-like structured measurements called pseudomeasurements. The pseudomeasurements are obtained by manipulating the original nonlinear measurements algebraically. The resulting filter has computational advantages over other filters with similar performance. Also, a variant of the Berg model is proposed as a target acceleration model under the assumption of a coordinated turn maneuver. The proposed model is consistent with the underlying assumption. Monte Carlo computer simulation results are included to demonstrate the effectiveness of the proposed suboptimal filter associated with the target acceleration model     

一种特殊白化滤波器的广义最小二乘法

 本文提出一种采用特殊白化滤波器的广义最小二乘法,简记为GLS（SF）。这种算法中不需要单独估计白化滤波器的阶次及参数,只需迭代估计模型参数,算法简单,准确度和收敛性也较好。对于输入噪声较小、输出端测量噪声近似白噪声的系统来说,文中证明,用此算法所得模型输出与系统输出观测值之误差平方和最小。文中给出几个实际动态校准中建立动态数学模型的例子。     

双星编队对空间非合作目标的仅测角跟踪方法

针对单星仅测角对目标跟踪误差较大和不良测量条件下跟踪精度下降的问题,提出利用编队卫星对非合作目标进行联合跟踪的方法。采用考虑地球非球形J2引力摄动的轨道动力学模型,建立多视线测量模型,融合编队卫星对目标的观测数据。然后,基于新息设计增益调节矩阵提高滤波器在测量故障条件下的鲁棒性。最后,建立仿真模型进行验证。仿真结果表明,相比单星跟踪,该方法的位置误差和速度误差分别减少了27.06%和26.96%。在系统存在异常量测时,相比常规滤波,该方法也具有更高的精确性和更好的鲁棒性。     

Modeling and Estimation for Tracking Maneuvering Targets

A new approach to the three-dimensional airborne maneuvering target tracking problem is presented. The method, which combines the correlated acceleration target model of Singer [3] with the adaptive semi-Markov maneuver model of Gholson and Moose [8], leads to a practical real-time tracking algorithm that can be easily implemented on a modern fire-control computer. Preliminary testing with actual radar measurements indicates both improved tracking accuracy and increased filter stability in response to rapid target accelerations in elevation, bearing, and range.     

增广误差模型算法在目标跟踪中的应用

针对目标机动运行过程中,滤波模型与机动状态模型失配的问题,提出了一种新的增广状态误差滤波模型。不同于现有增广方案,该模型从模型失配所致状态滤波误差的角度出发,将状态估计误差增广为一状态量,通过滤波估计后用其校正原状态量。算法分析表明,该增广滤波模型具有自适应调节多重渐消因子的等效特性,增强了对目标的跟踪能力。基于该增广状态误差滤波模型,给出了滤波算法设计并进行了仿真实验。实验结果表明,基于该模型的滤波算法在对机动目标进行跟踪时具有更强的鲁棒性。     

Multiple-Model Probability Hypothesis Density Filter for Tracking Maneuvering Targets

Tracking multiple targets with uncertain target dynamics is a difficult problem, especially with nonlinear state and/or measurement equations. With multiple targets, representing the full posterior distribution over target states is not practical. The problem becomes even more complicated when the number of targets varies, in which case the dimensionality of the state space itself becomes a discrete random variable. The probability hypothesis density (PHD) filter, which propagates only the first-order statistical moment (the PHD) of the full target posterior, has been shown to be a computationally efficient solution to multitarget tracking problems with a varying number of targets. The integral of PHD in any region of the state space gives the expected number of targets in that region. With maneuvering targets, detecting and tracking the changes in the target motion model also become important. The target dynamic model uncertainty can be resolved by assuming multiple models for possible motion modes and then combining the mode-dependent estimates in a manner similar to the one used in the interacting multiple model (IMM) estimator. This paper propose a multiple-model implementation of the PHD filter, which approximates the PHD by a set of weighted random samples propagated over time using sequential Monte Carlo (SMC) methods. The resulting filter can handle nonlinear, non-Gaussian dynamics with uncertain model parameters in multisensor-multitarget tracking scenarios. Simulation results are presented to show the effectiveness of the proposed filter over single-model PHD filters.     

Maximum likelihood track-before-detect with fluctuating targetamplitude

An important problem in target tracking is the detection and tracking of targets in very low signal-to-noise ratio (SNR) environments. In the past, several approaches have been used, including maximum likelihood. The major novelty of this work is the incorporation of a model for fluctuating target amplitude into the maximum likelihood approach for tracking of constant velocity targets. Coupled with a realistic sensor model, this allows the exploitation of signal correlation between resolution cells in the same frame, and also from one frame to the next. The fluctuating amplitude model is a first order model to reflect the inter-frame correlation. The amplitude estimates are obtained using a Kalman filter, from which the likelihood function is derived. A numerical maximization technique avoids problems previously encountered in “velocity filtering” approaches due to mismatch between assumed and actual target velocity, at the cost of additional computation. The Cramer-Rao lower bound (CRLB) is derived for a constant, known amplitude case. Estimation errors are close to this CRLB even when the amplitude is unknown. Results show track detection performance for unknown signal amplitude is nearly the same as that obtained when the correct signal model is used     

A Poisson multi-Bernoulli mixture filter with spawning based on Kullback–Leibler divergence minimization

In the classical form, the Poisson Multi-Bernoulli Mixture (PMBM) filter uses a PMBM density to describe target birth, surviving, and death, which does not model the appearance of spawned targets. Although such a model can handle target birth, surviving, and death well, its performance may degrade when target spawning arises. The reason for this is that the original PMBM filter treats the spawned targets as birth targets, ignoring the surviving targets’ information. In this paper, we propose a Kullback–Leibler Divergence (KLD) minimization based derivation for the PMBM prediction step, including target spawning, in which the spawned targets are modeled using a Poisson Point Process (PPP). Furthermore, to improve the computational efficiency, three approximations are used to implement the proposed algorithm, such as the Variational Multi-Bernoulli (VMB) filter, the Measurement-Oriented marginal MeMBer/Poisson (MOMB/P) filter, and the Track-Oriented marginal MeMBer/Poisson (TOMB/P) filter. Finally, simulation results demonstrate the validity of the proposed filter by using the spawning model in these three approximations.     

Probability hypothesis density filter with adaptive parameter estimation for tracking multiple maneuvering targets

The probability hypothesis density (PHD) filter has been recognized as a promising tech-nique for tracking an unknown number of targets. The performance of the PHD filter, however, is sensitive to the available knowledge on model parameters such as the measurement noise variance and those associated with the changes in the maneuvering target trajectories. If these parameters are unknown in advance, the tracking performance may degrade greatly. To address this aspect, this paper proposes to incorporate the adaptive parameter estimation (APE) method in the PHD filter so that the model parameters, which may be static and/or time-varying, can be estimated jointly with target states. The resulting APE-PHD algorithm is implemented using the particle filter (PF), which leads to the PF-APE-PHD filter. Simulations show that the newly proposed algorithm can correctly identify the unknown measurement noise variances, and it is capable of tracking mul-tiple maneuvering targets with abrupt changing parameters in a more robust manner, compared to the multi-model approaches.     

Null phase-shift polarization filtering for high-frequency radar

In order to effectively cancel the interference in polarization filtering, the parameters of the polarization filter should timely adapt to the variation of the polarization of the interference, which may impact the amplitude and phase of the desired signal that passes through the same polarization filter during the coherent integration time (CIT) and render the enhancement of the signal integration a failure. To avoid this, a null phase-shift polarization (NPSP) filter is proposed, which is composed of a linear polarization transformer (LPVT), a conventional single-notch polarization (SNP) filter and an amplitude/phase compensation device (A/PCD). The interference, which has polarization different from those of the desired target signal, can be suppressed completely while the target signal remains without distortion. Some applications of high-frequency (HF) radars for suppressing the radio interference are introduced. Simulation results from the experimentally derived data indicate that the improvement of the signal-to-interference ratio (SIR) can be expected to be more than 28 dB. The proposed NPSP filter is effective in HF radar or other coherent systems.     

Multiple model nonlinear filtering for low signal ground target applications

The design and implementation of a multiple model nonlinear filter (MMNLF) for ground target tracking using ground moving target indicator (GMTI) radar measurements is described. Like the well-known interacting multiple model Kalman filter (IMMKF), the MMNLF is based on the theory of hybrid stochastic systems. However, since it models the probability distribution for the target in a region, rather than just the distribution's first and second moments, a nonlinear filter is able to capture more fine-grained detail of the target motion and requires fewer models than typical IMMKF implementations. This is illustrated here with a two-model MMNLF in which one motion model incorporates terrain constraints while the second is a nearly constant velocity (CV) model. Another feature of the MMNLF is that it enables incorporation of prethresholded measurements. To implement the filter, the target state conditional probability density is discretized on a set of moving grids and recursively updated with sensor measurements via Bayes' formula. The conditional density is time updated between sensor measurements using alternating direction implicit (ADI) finite difference methods, generalized for this hybrid application. In simulation testing against low signal-to-interference-plus-noise ratio (SINR) targets, the MMNLF is able to maintain track in situations where single model filters based on either of the component models or filters that use thresholded data fail. Potential applications of this work include detection and tracking of foliage-obscured moving targets.     

A three-state Kalman tracker using position and rate measurements

A three-state Kalman tracker is described for tracking a moving target, such as an aircraft, making use of the position and rate measurements obtained by a track-white-scan radar sensor which employs pulsed Doppler processing, such as the moving target detector providing unambiguous Doppler data. The steady-state filter parameters have been analytically obtained under the assumption of white noise maneuver capability. The numerical computations of these parameters are in excellent agreement with those obtained from the recursive Kalman filter matrix equations. The solution for the case when only the range measurements are available is obtained as a special case of this model. Graphs of normalized covariances and gains are presented to illustrate how the solution depends on different parameters     

Application of Road Information in Ground Moving Target Tracking

A new algorithm is developed to achieve accurate state estimation in ground moving target tracking by means of using road information. It is an adaptive variable structure interacting multiple model estimator with dynamic models modification （DMM VS-IMM for short）. Firstly, road information is employed to modify the target dynamic models used by filter, including modification of state transition matrix and process noise. Secondly, road information is applied to update the model set of a VS-IMM estimator. Predicted state estimation and road information are used to locate the target in the road network on which the model set is updated and finally IMM filtering is implemented. As compared with traditional methods, the accuracy of state estimation is improved for target moving not only on a single road, but also through an intersection. Monte Carlo simulation demonstrates the efficiency and robustness of the proposed algorithm with moderate computational loads.     

一种新的基于机动检测的机动目标跟踪算法

针对Kalman滤波跟踪机动目标发散和目前多数自适应Kalman滤波算法对运动模型适应性不强的问题,提出了一种新的基于机动检测的机动目标跟踪算法,通过实时自适应的改变滤波模型提高对机动目标跟踪精度。对这种方法与Kalman滤波算法进行了计算机仿真比较,结果表明,该方法计算量小,可实时精确地自适应匹配目标的运动模型,可实现对机动目标稳定可靠的跟踪。