定位坐标系的确定与分析

本文根据定位件的构形及其组合的特点，论述了定位坐标系的确定原则和方法，以有助于正确进行定位设计和定位分析。     

基于FLoFTR算法的无人机实时在线地理定位

研制高效鲁棒的智能视觉定位方法是解决全球导航卫星系统（GNSS）拒止条件下无人机导航定位的重要途径之一。传统视觉定位方法存在精度较差、容易丢失定位的问题。本文提出一种FLoFTR算法，通过对高精度影像匹配算法LoFTR进行改进优化，在无人机计算平台上实现实时高精度定位。FLoFTR采用知识蒸馏方法压缩模型规模，提升推理效率，并通过改进特征提取模块和应用基于余弦距离的特征匹配方法，进一步降低了匹配时间并维持相当的匹配性能。在研制的软硬一体的平台上试验表明，优化后模型平均定位误差损失维持在0.1m以内，定位平均处理时间为47ms，定位速度提升超过7倍，可满足无人机定位的精度和实时性要求。     

线性调频半导体激光定位的研究

提出了一种新的半导体激光定位技术，介绍了它的定位原理、装置和实验结果．它利用半导体激光器的线性调频特性来实现干涉零点的动态定位，突破了传统白光定位的局限，简化了干涉仪设计，并实现了大范围内的零点捕捉，是一种实用的干涉定位技术．     

成组小孔高效钻孔装置

本文介绍一种高效钻孔装置，该装置可提高工效１０倍。Ｘ向采用二层双向锯齿形齿条定位，手柄拨动可实现双向进给定位，Ｙ向用扇形定位孔插销定位，固定钻套可保证钻头准确地对准钻套。     

城市建筑室内外无缝应急救援定位技术

应急救援定位技术的发展关系到救援人员和受害人员的生命安全。首先，对应急定位与普适定位进行了对比，总结了应急定位的主要特征，阐述了应急定位系统的精度、连续性等技术指标。之后，分析了不同传感器在应急场景下的可用性，对相应传感器在应急定位领域中的融合和应用进行了综述。最后，围绕坐标基准、知识图谱、多源协同、智能控制四项关键技术架构室内外无缝应急救援定位系统，总结了构建流程。其中，坐标基准将室内和室外、相对定位和绝对定位统一，而知识图谱综合权威发布信息和灾害场景信息进行决策，不仅可以辅助多源融合中传感器的选择、传感器无缝切换以及故障传感器隔离，还能协调智能控制中救援设备的调度、救援设备之间和救援设备与人员之间的协同定位。     

一种改进的声反卷积相关声源定位方法

基于传声器阵列的声源定位算法的性能优劣决定了气动噪声试验检测中气动噪声源定位成像的准确性。为了提高相关声源定位方法的稳健性和准确性，提出一种改进的声反卷积相关声源定位方法——D-MACS（Developed-Mapping of Acoustic Correlated Sources）方法。该方法的特点是：在传统MACS方法的基础上，将声反卷积模型进行改进，使模型体现出声场空间扫描点声压互谱矩阵与互谱波束形成输出矩阵之间的数学关系，其最终获得的声源定位结果，能够提高MACS方法声源定位辨识的稳健性和准确性。通过仿真信号研究和声学风洞环境中的声源定位试验研究，比较了DAS（Delay And Sum beamformming）、DAMAS-C（Deconvolution Approach for the Mapping of Acoustic Correlated Sources）、MACS和D-MACS这4种方法的声源定位性能，验证了D-MACS方法在声源定位性能上的优势。     

基于非合作低轨卫星的测向交叉定位技术

根据非合作低轨卫星的特点，可以被动测量多颗卫星信号的来向，通过测向交叉的方式进行定位。但是通过星历解算出的卫星位置位于地心地固坐标系，用户测量的方位角和俯仰角基于站心坐标系。针对非合作低轨卫星测向交叉定位时目标用户角度信息与卫星位置基于不同坐标系的问题，提出了一种迭代最小二乘定位算法，通过迭代的方式不断收敛定位结果，能够在目标用户角度信息与卫星位置基于不同坐标系的情况下，解决非合作低轨卫星的测向交叉定位问题。仿真结果表明，基于迭代最小二乘定位算法能够实现非合作低轨卫星仅利用角度定位，并分析了测角精度、卫星轨道高度、参与定位卫星数与定位误差之间的关系。针对迭代的计算方法，分析了迭代过程中不同收敛条件下迭代次数与定位误差之间的关系。在保证定位精度的情况下，将迭代收敛范围设置为8~30 km，可以降低2~3次迭代次数。     

基于半参数估计的智能手机WiFi RTT定位方法

近年来，以智能、智慧为特征的新经济社会形态不断涌现，依托智能手机实现低成本高精度泛在定位的需求日益迫切。总体上看，以卫星导航传感器为核心，融合异构化测距信号是实现高精度定位的主要手段。在简要分析了WiFi-RTT测距信号质量的基础上，定量分析了WiFi-RTT系统的误差特点，利用半参数方法构造了WiFi-RTT定位的观测模型和随机模型，并通过实测数据对该方法的精度和可靠性进行了验证。试验表明：WiFi-RTT定位在静态和动态条件下可实现精度优于0.4m和0.6m的定位。相关研究对于推动智能手机的高精度定位应用具有重要参考价值。     

视觉与惯性融合的多旋翼飞行机器人室内定位技术

随着人工智能技术的发展，无人机的应用场景趋向多元，人们对无人机的需求也不仅仅满足于简单的飞行任务，而是赋予其飞行机器人的角色，对其自主导航、复杂环境下的定位以及智能协同方面提出了更高的要求。针对室内场景下的定位需求，融合视觉与惯性数据实现了多旋翼飞行机器人的室内定位。在视觉前端加入图像增强算法以提高图像灰度对比度，减少了光流跟踪的误匹配点数。提出了一种基于图像信息的特征点提取和图像帧发布策略提高了定位精度，解决了室内环境下的定位漂移问题。针对飞行机器人室内自主跟踪及降落任务，设计了基于视觉定位的飞行机器人自主降落系统。在Gazebo中搭建飞行机器人模型仿真验证自主降落系统有效性，在EuRoC数据集下对定位算法进行对比评估，搭建飞行机器人平台在真实场景下进行室内定位实验，完成了室内场景下平台自主跟踪及降落任务，并采用运动捕捉系统获取的定位真值数据进行了误差分析，结果表明该定位技术满足室内场景下的自主跟踪及降落任务需求。     

大学生就业正确定位的思考

大学生如何准确地对自己进行就业定位是大学生就业过程中一个不可忽视的重要问题，通过对目前大学生在就业过程中定位不准现状的分析，提出大学生准确进行就业定位的思路，帮助大学生树立正确的求职目标。     

Optimum FFT-based frequency acquisition with application toCOSPAS-SARSAT

In the case of a single sinusoid or multiple well-separated sinusoids, a coarse estimator consisting of a windowed Fourier transform followed by a fine estimator which is an interpolator is a good approximation to an optimal frequency acquisition and measurement algorithm. The design tradeoffs are described. It is shown that for the fine-frequency estimator a good method is to fit a Gaussian function to the fast-Fourier-transform (FFT) peak and its two neighbors. This method achieves a frequency standard deviation and a bias in the order of only a few percent of a bin. In the case of short-time stationarity, for a moderate number of averages and for an adaptive threshold detector, only between 0.5 and 1 dB is lost when averaging is traded off for FFT length, in contrast to the asymptotic result of 1.5 dB. The COSPAS-SARSAT satellite system for emergency detection and localization is used to illustrate the concepts. The algorithm is analyzed theoretically, and good agreement is found with test results     

Interference torque of a three-floated gyroscope with gas-lubricated bearings subject to a sudden change of the specific force

A numerical study is carried out to investigate the influence of a sudden change of the specific force on a three-floated gyroscope with a rotor supported on gas-lubricated bearings.The interference torque is calculated to evaluate the influence by modeling the transient behavior of the rotor-bearing system. In combination with dynamic equations of the rotor displacement,the Reynolds equation is solved on the surface of spiral-grooved conical bearings. It is assumed that a steady state has been obtained with a constant specific force, and then the specific force is suddenly changed and maintained constant after that. Responses of the sudden change are obtained by solving the equations. Numerical results show that the direction of the sudden change of the specific force is the main factor which influences the interference torque curve. With a sudden change along the input direction, the interference torque fluctuation has a constant frequency and a decreasing amplitude. With a sudden change along the output direction, the interference torque fluctuates in a small range. With a sudden change along the spin direction, the change of the interference torque combines a fluctuation and a gradually-changing quasi-equilibrium value. This study provides a supplement to the steady-state error model of the three-floated gyroscope.     

液体冲压发动机控制系统半实物仿真

运用小偏离线性化理论和Willoh方法，建立了液体冲压发动机和弹体动态数学模型。动态数学模型在微型计算上一体化运行，形成液体冲压发动机／弹体一体化实时数字仿真器。实时数字仿真器通过输入输出接口与液体冲压发动机的实际控制系统进行联接，组成液体冲压发动机、弹性和发动机控制系统半实物仿真系统。对冲压发动机飞行马赫数和控制 系统供油量的半实物仿真结果表明，系统能满足研制工作的需要。     

Simulation on effect of throat contraction ratio and strake stagger angle on flow field and aerodynamic performance of scrampressor

The design methods of typical supersonic aircraft intakes and shock wave compression technology have been applied to ram-rotor, an attractive compression system. A ram-rotor is of a typical structure including the compression ramp, the throat and the subsonic diffuser; a scrampressor is similar to ram-rotor, the only difference is that scrampressor has no subsonic diffuser. The work was the continuation of the preparatory work. In order to further study the effect of throat contraction ratio and strake stagger angle on the flow field and performance of a scrampressor, the flow field of a scrampressor with a three-dimensional flow path was numerically simulated with different throat contraction ratios and strake stagger angles. Simulated results indicated that the optional aerodynamic performance of a scrampressor could be achieved with an adiabatic efficiency of 0.8413 a total pressure recovery coefficient of 0.8446, a total pressure ratio of 7.14 and a static pressure ratio of 5.17 for a throat contraction ratio of 0.6 and a strake stagger angle of 12°. It was therefore concluded that an appropriate decrease in throat contraction ratio and an increase in strake stagger angle could help the comprehensive improvement of a scrampressor in performance.      

A comparative study on acoustic damping induced by half-wave, quarter-wave, and Helmholtz resonators

The damping characteristics of three-type resonators, a half-wave, a quarter-wave, and a Helmholtz resonator are studied experimentally by adopting linear acoustic test. A quantitative acoustic property of sound absorption coefficient in a model enclosure with the resonators is measured and thereby, the acoustic-damping capacity of a resonator is characterized. For a comparative study on acoustic damping, the damping capacity of a half-wave resonator is compared with that of the other resonators. A half-wave and a quarter-wave resonators have the same damping mechanism, but a quarter-wave resonator has much larger damping capacity than a half-wave resonator with the same diameter of a single resonator. It is found that shorter length of a resonator has the advantage of longer one with respect to the damping capacity. The damping capacity of a Helmholtz resonator increases with cavity volume and does as the orifice length decreases. A Helmholtz resonator has the highest damping capacity of three-type resonators and a half-wave resonator has the lowest. Besides, a Helmholtz resonator requires the smallest number of resonators for optimal damping. The design criterion of each resonator on the optimal damping is provided by the normalized parameter of open-area ratio and the similarity behavior for the optimal damping is observed for various enclosure diameters.     

Measurement of Distributed Targets with the Random Signal Radar

A model of a distributed target as a collection of independent, Poisson distributed point scatterers or scattering centers in a range-velocity target space is introduced and is characterized by a deterministic function called the ?scatterer density function.? This function is the density of the point scatterers in the range-velocity space and can be estimated in a relatively straightforward manner by any radar having adequate resolution in both range and velocity and no ambiguities in the region occupied by the distributed target. The use of the random signal radar with a correlator receiver is considered here and the statistical properties of the correlator output, when the return signal is from a distributed target, are derived. It is shown that the spectral density is simply related to the scatterer density function. The technique is illustrated by an example in which the target is a tornado modeled as a cylinder with constant angular velocity. The example suggests that is a possible to remotely estimate the radar cross section per unit volume as a function of distance from the center of the tornado.     

Dynamics and de-spin control of massive target by single tethered space tug

This paper investigates the dynamics and de-spin control of a massive target by a single tethered space tug in the post-capture phase. The dynamic model of the tethered system is derived and simplified to a dimensionless form. Further, a decoupled PD controller is proposed, and the local stability of the controller is analyzed by linearization technique. Parametric studies of the dynamics and de-spin control of a massive target are conducted to characterize the dynamic process of de-spin with the proposed control law. It is shown that the massive target can be de-span by a single and small space tug with limited thrust within finite time. The thrust tangent with the tether de-spins the target while the thrust normal to the tether prevents the tether from winding up the target. The tether length has a positive contribution to the de-spin of a target. The longer tether leads to a faster de-spin process.     

基于普通分离原理的制导/估计综合设计方法

现有的先进制导律研究常常分离设计最优估计器和最优制导律,但是这种分离设计没有被证明是有效和最优的设计方法.本文基于普通分离原理(GST),提出一种制导/估计综合设计方法.首先,将拦截器反导作战模型考虑为一类非线性、非高斯追逃拦截问题,建立了噪声环境中追逐-逃逸对策模型;其次,引入追逃未达集概念,利用几何方法将估计器设计...     

基于数据模型的某型民用飞机货舱区域腐蚀影响因素研究

 为研究舱内环境因素对民用飞机货舱区域腐蚀的影响,采集了停场飞机的货舱内外环境指标的数据,建立线性模型,给出了飞机货舱内外环境指标的数量关系。收集了国内几家航空公司某型民用飞机长期的结构腐蚀维修数据,计算了飞机货舱区域腐蚀频率与环境因素的灰色关联度,选取影响腐蚀的主要环境因素,提取主成分消除环境因素之间的多重共线性,建立腐蚀频率的多因素回归模型,研究了各类环境因素对飞机货舱区域腐蚀的影响规律与特点。分析结果表明:高温高湿天数与降水指标对该型飞机货舱区域腐蚀有显著的促进作用,并且不同航空公司的货舱区域腐蚀频率有显著差异,表明运营、结构检查和维护等人为因素对货舱区域腐蚀有显著影响。分析结果符合民用飞机货舱腐蚀控制的工程经验,表明研究方法是合理的。     

Detection of chi-square fluctuating targets in arbitrary clutter

In a recent paper, general expressions were derived for the density and cumulative probability functions of the amplitude of a linear matched-filter output given a nonfluctuating target in a clutter-limited environment. These expressions were based on the clutter amplitude density function. The results are extended to calculate the cumulative probability function of the output of a linear matched filter used to detect a chi-square fluctuating target in a clutter-limited environment. The resulting method is applied to a common radar clutter model, and experimental sonar data.