THE CLUSTER SCIENCE DATA SYSTEM (CSDS) – A NEW APPROACH TO THE DISTRIBUTION OF SCIENTIFIC DATA

Cluster is an ESA/NASA four-spacecraft mission designed to study plasma processes in three dimensions using the combined data from eleven instruments on each spacecraft. This mission requires the combination of many measured parameters, and the Cluster community have taken the unprecedented step of establishing a set of high quality data products from all instruments at spin (~ 4 s) resolution which will be produced and distributed throughout the mission lifetime. The Cluster Science Data System (CSDS) is based on a set of eight data centres which are implemented and funded through national programmes. As part of CSDS, a Joint Science Operations Centre (JSOC) has been established to facilitate the commanding of the 44 instruments. It is co-located with the UK data centre at the Rutherford Appleton Laboratory (RAL), Didcot, United Kingdom. ESA's contribution to CSDS includes the provision of the CSDS User Interface, a dedicated network (CSDSnet) to interconnect the data centres, and the co-ordination of all activities at CSDS level. A wide scientific community wishing to use Cluster data will have differing data rights, experience and means of access. Users will also include those working with data sets from other missions, e.g., Soho, Geotail, Wind, Polar, Interball, and Equator-S. The Cluster Science Data System is primarily designed to support multi-instrument and multi-spacecraft data analysis and it is distributed across six national data centres in Europe, one in the USA, and one in China. CSDSnet will be used to interconnect the European data centres, the Joint Science Operations Centre at Didcot and the spacecraft Operations Control Centre at ESOC in Darmstadt.     

CLUSTER MISSION OPERATIONS

The Cluster ground segment design and mission operations concept have been defined according to the basic mission requirements, namely, to allow the transfer of the four spacecraft from the initial geostationary transfer orbit achieved at separation from the launcher into the final highly elliptical polar orbits, such that in the areas of scientific interest along their orbits, the four spacecraft will form a tetrahedral configuration with pre-defined separation distances, to be changed every six months during the mission. The Cluster mission operations will be carried out by ESA from its European Space Operations Centre; the task of merging the Principal Investigators' requests into coordinated, regular scientific mission planning inputs to ESOC will be undertaken by the Joint Science Operations Centre. The mission products will be distributed to the scientific community regularly in form of CD-ROMs. Principal Investigators will also have access to quick-look science, housekeeping telemetry and auxiliary data via an electronic network.     

Rosetta Ground Segment and Mission Operations

At the European Space Operations Centre in Darmstadt (Germany) the activities for ground segment development and mission operations preparation for Rosetta started in 1997. Many of the characteristics of this mission were new to ESOC and have therefore required an early effort in identifying all the necessary facilities and functions. The ground segment required entirely new elements to be developed, such as the large deep-space antenna built in New Norcia (Western Australia). The long duration of the journey to the comet, of about 10 years, required an effort in the operations concept definition to reduce the cost of routine monitoring and control. The new approaches adopted for the Rosetta mission include full transfer of on-board software maintenance responsibility to the operations team, and the installation of a fully functioning spacecraft engineering model at ESOC, in support of testing and troubleshooting activities in flight, but also for training of the operations staff. Special measures have also been taken to minimise the ground contact with the spacecraft during cruise, to reduce cost, down to a typical frequency of one contact per week. The problem of maintaining knowledge and expertise in the long flight to comet Churyumov–Gerasimenko is also a major challenge for the Rosetta operations team, which has been tackled early in the mission preparation phase and evolved with the first years of flight experience.     

THE JOINT SCIENCE OPERATIONS CENTRE

The Joint Science Operations Centre (JSOC) has been established to provide the operational interface between the Instrument Principal Investigators (PIs) and the European Space Operations Centre (ESOC). Its key task will be to merge inputs from the Cluster instrument teams and to generate the coordinated command schedule for operation of the scientific payload. In addition, it will collect and process data needed to plan those operations and will monitor the performance of the mission and individual instruments. This paper outlines the JSOC subsystems that have been built to carry out these tasks and highlights points of scientific or technical interest within these systems.     

The MESSENGER Science Operations Center

The MESSENGER Science Operations Center (SOC) is an integrated set of subsystems and personnel whose purpose is to obtain, provide, and preserve the scientific measurements and analysis that fulfill the objectives of the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission. The SOC has two main functional areas. The first is to facilitate science instrument planning and operational activities, including related spacecraft guidance and control operations, and to work closely with the Mission Operations Center to implement those plans. The second functional area, data management and analysis, involves the receipt of science-related telemetry, reformatting and cataloging this telemetry and related ancillary information, retaining the science data for use by the MESSENGER Science Team, and preparing data archives for delivery to the Planetary Data System; and the provision of operational assistance to the instrument and science teams in executing their algorithms and generating higher-level data products.     

ExoMars Trace Gas Orbiter (TGO) Science Ground Segment (SGS)

The ExoMars Trace Gas Orbiter (TGO) Science Ground Segment (SGS), comprised of payload Instrument Team, ESA and Russian operational centres, is responsible for planning the science operations of the TGO mission and for the generation and archiving of the scientific data products to levels meeting the scientific aims and criteria specified by the ESA Project Scientist as advised by the Science Working Team (SWT). The ExoMars SGS builds extensively upon tools and experience acquired through earlier ESA planetary missions like Mars and Venus Express, and Rosetta, but also is breaking ground in various respects toward the science operations of future missions like BepiColombo or JUICE. A productive interaction with the Russian partners in the mission facilitates broad and effective collaboration. This paper describes the global organisation and operation of the SGS, with reference to its principal systems, interfaces and operational processes.     

THE CLUSTER DATA PROCESSING SYSTEM: A DISTRIBUTED SYSTEM IN SUPPORT OF A CHALLENGING SCIENTIFIC MISSION

The Cluster mission is aimed at the study of small-scale structures that are believed to be fundamental in determining the behaviour of key interactive processes of cosmic plasma. The mission will be controlled from the European Space Operations Centre (ESOC). ESOC is also in charge of the commanding of the scientific payloads on-board the four Cluster spacecraft after negotiation with the Cluster Principal Investigators (PIs) and of collecting and distributing the mission's scientific results to the Cluster community. This paper describes the process of translating the scientific requirements of the Cluster mission into a data-processing system supporting the mission via the definition of an appropriate operational scenario. In particular, the process of negotiation between the PIs and ESOC to command the spacecraft is mediated by the Joint Science Operations Centre (JSOC) and finalised by the Cluster Mission Planning System (CMPS) while the return of the data to the Cluster community is actuated by the Cluster Data Disposition System (CDDS). The Cluster Mission Control System (CMCS) provides the interface between these two systems and the spacecraft. These elements constitute the Cluster Data-Processing System (CDPS).     

Dawn Science Planning, Operations and Archiving

The Dawn science operations team has designed the Vesta mission within the constraints of a low-cost Discovery mission, and will apply the same methodology to the Ceres mission. The design employs proactive mapping mission strategies and tactics such as functional redundancy, adaptability to trajectory uncertainties, and easy sequence updates to deliver reliable and robust sequences. Planning tools include the Science Opportunity Analyzer and other multi-mission tools, and the Science time-ordered listings. Science operations are conducted jointly by the Science Operations Support Team at the Jet Propulsion Laboratory (JPL) and the Dawn Science Center at the University of California, Los Angeles (UCLA). The UCLA Dawn Science Center has primary responsibility for data archiving while the JPL team has primary responsibility for spacecraft and instrument operations. Constraints and uncertainties in the planning and sequencing environment are described, and then details of the science plan are presented for each mission sub-phase. The plans indicate that Dawn has a high probability of meeting its science objectives and requirements within the imposed constraints.     

Rosetta Goes to Comet Wirtanen

The International Rosetta Mission, approved by the Science Programme Committee of the European Space Agency as the Planetary Cornerstone Mission in ESA's long-term programme Horizon 2000, will rendezvous in 2011 with Comet 46P/Wirtanen close to its aphelion and will study the nucleus and the evolution of the coma for almost two years until it reaches perihelion. In addition to the investigations performed by the scientific instruments on board the orbiter, a Surface Science Package (Rosetta Lander) will be deployed onto the surface of the nucleus early during the near-nucleus study phase. On its way to Comet 46P/Wirtanen, Rosetta will fly by and study the two asteroids 4979 Otawara and 140 Siwa. This revised version was published online in June 2006 with corrections to the Cover Date.     

Flight Operations in the New Millennium

New approaches are being studied for real-time interaction, and related supporting processes, with spacecraft and instruments in deep space. Spacecraft are evolving, improving in many ways, and generally becoming more robust. Operations is changing also, and will be more automated in the future. However, there is a challenge. Deep space missions are not all alike. The operations phases of discovery and exploration are an extension of the research that creates the mission; they are the time of obtaining results. This examines the historical role of flight operations and its evolving processes to develop an understanding of the operational methods that will be effective in the future. It takes people, equipment, software, space, and connectivity for operations success. A balance has to be struck between improving technology, gaining knowledge, automation, and realistic expectations. Finally, the recommended methods to gain efficiency in operations are system-wide services and shared resources. These common processes will meet the challenge of varied missions.     

The Emergence of Life

The Rosetta observations have greatly advanced our knowledge of the cometary nucleus and its immediate environment. However, constraints on the mission (both planned and unplanned), the only partially successful Philae lander, and other instrumental issues have inevitably resulted in open questions. Surprising results from the many successful Rosetta observations have also opened new questions, unimagined when Rosetta was first planned. We discuss these and introduce several mission concepts that might address these issues. It is apparent that a sample return mission as originally conceived in the 1980s during the genesis of Rosetta would provide many answers but it is arguable whether it is technically feasible even with today’s technology and knowledge. Less ambitious mission concepts are described to address the suggested main outstanding scientific goals.

     

The IMAGE science and mission operations center

The Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) will produce forefront science by quantifying the response of the magnetosphere to the time variable solar wind. It will acquire, for the first time, a variety of three-dimensional images of magnetospheric boundaries and plasma distributions extending from the magnetopause to the inner plasmasphere. The images will be produced on time scales needed to answer important questions about the interactions of the solar wind and the magnetosphere. The IMAGE team will provide open access to all IMAGE data. Thus there will be no proprietary rights or periods. All IMAGE data products will be archived and available to the scientific research community. The IMAGE mission will operate with a near 100% duty cycle with all instruments in their baseline operational modes. A Science and Mission Operations Control Center or SMOC has been developed at the NASA Goddard Space Flight Center (GSFC) to be the main data and command processing system for IMAGE. The IMAGE Level-0 data will be processed into Level 0.5 and Level-1 data and browse products within 24 hours after their receipt of raw data in the SMOC. These data products will be transferred to the NSSDC, for long-term archiving, and posted immediately on the world-wide-web for use by the international scientific community and the public.     

ISTP science data systems and products

The International Solar-Terrestrial Physics (ISTP) program will provide simultaneous coordinated scientific measurements from most of the major areas of geospace including specific locations on the Earth's surface. This paper describes the comprehensive ISTP ground science data handling system which has been developed to promote optimal mission planning and efficient data processing, analysis and distribution. The essential components of this ground system are the ISTP Central Data Handling Facility (CDHF), the Information Processing Division's Data Distribution Facility (DDF), the ISTP/Global Geospace Science (GGS) Science Planning and Operations Facility (SPOF) and the NASA Data Archive and Distribution Service (NDADS).The ISTP CDHF is the one place in the program where measurements from this wide variety of geospace and ground-based instrumentation and theoretical studies are brought together. Subsequently, these data will be distributed, along with ancillary data, in a unified fashion to the ISTP Principal Investigator (PI) and Co-Investigator (CoI) teams for analysis on their local systems. The CDHF ingests the telemetry streams, orbit, attitude, and command history from the GEOTAIL, WIND, POLAR, SOHO, and IMP-8 Spacecraft; computes summary data sets, called Key Parameters (KPs), for each scientific instrument; ingests pre-computed KPs from other spacecraft and ground basel investigations; provides a computational platform for parameterized modeling; and provides a number of data services for the ISTP community of investigators. The DDF organizes the KPs, decommutated telemetry, and associated ancillary data into products for duistribution to the ISTP community on CD-ROMs. The SPOF is the component of the GGS program responsible for the development and coordination of ISTP science planning operations. The SPOF operates under the direction of the ISTP Project Scientist and is responsible for the development and coordination of the science plan for ISTP spacecraft. Instrument command requests for the WIND and POLAR investigations are submitted by the PIs to the SPOF where they are checked for science conflicts, forwarded to the GSFC Command Management Syntem/Payload Operations Control Center (CMS/POCC) for engineering conflict validation, and finally incorporated into the conflict-free science operations plan. Conflict resolution is accomplished through iteration between the PIs, SPOF and CMS and in consultation with the Project Scientist when necessary. The long term archival of ISTP KP and level-zero data will be undertaken by NASA's National Space Science Data Center using the NASA Data Archive and Distribution Service (NDADS). This on-line archive facility will provide rapid access to archived KPs and event data and includes security features to restrict access to the data during the time they are proprietary.     

The Interstellar Boundary Explorer Science Operations Center

The Interstellar Boundary Explorer (IBEX) Science Operations Center is responsible for supporting analysis of IBEX data, generating special payload command procedures, delivering the IBEX data products, and building the global heliospheric maps of energetic neutral atoms (ENAs) in collaboration with the IBEX team. We describe here the data products and flow, the sensor responses to ENA fluxes, the heliospheric transmission of ENAs (from 100 AU to 1 AU), and the process of building global maps of the heliosphere. The vast majority of IBEX Science Operations Center (ISOC) tools are complete, and the ISOC is in a remarkable state of readiness due to extensive reviews, tests, rehearsals, long hours, and support from the payload teams. The software has been designed specifically to support considerable flexibility in the process of building global flux maps. Therefore, as we discover the fundamental properties of the interstellar interaction, the ISOC will iteratively improve its pipeline software, and, subsequently, the heliospheric flux maps that will provide a keystone for our global understanding of the solar wind’s interaction with the interstellar medium. The ISOC looks forward to the next chapter of the IBEX mission, as the tools we have developed will be used in partnership with the IBEX team and the scientific community over the coming years to define our global understanding of the solar wind’s interaction with the local interstellar medium.     

Virtis: An Imaging Spectrometer for the Rosetta Mission

The VIRTIS (Visual IR Thermal Imaging Spectrometer) experiment has been one of the most successful experiments built in Europe for Planetary Exploration. VIRTIS, developed in cooperation among Italy, France and Germany, has been already selected as a key experiment for 3 planetary missions: the ESA-Rosetta and Venus Express and NASA-Dawn. VIRTIS on board Rosetta and Venus Express are already producing high quality data: as far as Rosetta is concerned, the Earth-Moon system has been successfully observed during the Earth Swing-By manouver (March 2005) and furthermore, VIRTIS will collect data when Rosetta flies by Mars in February 2007 at a distance of about 200 kilometres from the planet. Data from the Rosetta mission will result in a comparison – using the same combination of sophisticated experiments – of targets that are poorly differentiated and are representative of the composition of different environment of the primordial solar system. Comets and asteroids, in fact, are in close relationship with the planetesimals, which formed from the solar nebula 4.6 billion years ago. The Rosetta mission payload is designed to obtain this information combining in situ analysis of comet material, obtained by the small lander Philae, and by a long lasting and detailed remote sensing of the comet, obtained by instrument on board the orbiting Spacecraft. The combination of remote sensing and in situ measurements will increase the scientific return of the mission. In fact, the “in situ” measurements will provide “ground-truth” for the remote sensing information, and, in turn, the locally collected data will be interpreted in the appropriate context provided by the remote sensing investigation. VIRTIS is part of the scientific payload of the Rosetta Orbiter and will detect and characterise the evolution of specific signatures – such as the typical spectral bands of minerals and molecules – arising from surface components and from materials dispersed in the coma. The identification of spectral features is a primary goal of the Rosetta mission as it will allow identification of the nature of the main constituent of the comets. Moreover, the surface thermal evolution during comet approach to sun will be also studied.     

The Plasma Environment of Comet 67P/Churyumov-Gerasimenko Throughout the Rosetta Main Mission

The plasma environment of comet 67P/Churyumov-Gerasimenko, the Rosetta mission target comet, is explored over a range of heliocentric distances throughout the mission: 3.25 AU (Rosetta instruments on), 2.7 AU (Lander down), 2.0 AU, and 1.3 AU (perihelion). Because of the large range of gas production rates, we have used both a fluid-based magnetohydrodynamic (MHD) model as well as a semi-kinetic hybrid particle model to study the plasma distribution. We describe the variation in plasma environs over the mission as well as the differences between the two modeling approaches under different conditions. In addition, we present results from a field aligned, two-stream transport electron model of the suprathermal electron flux when the comet is near perihelion.     

The Rosetta Lander (“Philae”) Investigations

The paper describes the Rosetta Lander named Philae and introduces its complement of scientific instruments. Philae was launched aboard the European Space Agency Rosetta spacecraft on 02 March 2004 and is expected to land and operate on the nucleus of 67P/Churyumov-Gerasimenko at a distance of about 3 AU from the Sun. Its overall mass is ~98 kg (plus the support systems remaining on the Orbiter), including its scientific payload of ~27 kg. It will operate autonomously, using the Rosetta Orbiter as a communication relay to Earth. The scientific goals of its experiments focus on elemental, isotopic, molecular and mineralogical composition of the cometary material, the characterization of physical properties of the surface and subsurface material, the large-scale structure and the magnetic and plasma environment of the nucleus. In particular, surface and sub-surface samples will be acquired and sequentially analyzed by a suite of instruments. Measurements will be performed primarily during descent and along the first five days following touch-down. Philae is designed to also operate on a long time-scale, to monitor the evolution of the nucleus properties. Philae is a very integrated project at system, science and management levels, provided by an international consortium. The Philae experiments have the potential of providing unique scientific outcomes, complementing by in situ ground truth the Rosetta Orbiter investigations. Philae team members are listed in the acknowledgements     

CCSDS空间包在MOIMS领域中的应用

为了适应未来航天任务的发展,构建以服务为导向的、开放的、可重用的航天器任务操作系统,分析了CCSDS(Consultative Committee for Space Data Systems,空间数据系统咨询委员会)中MOIMS (Mission Operations and Information Management System,任务操作及信息管理系统)领域的任务操作服务框架的原理、层次结构及优点,对任务操作相关的通用服务、功能服务、COM(Common Object Model,通用对象模型)及MAL(Message Abstraction Layer,消息抽象层)对服务的抽象化描述方法进行了研究.MAL向任务操作相关的服务提供了通用的服务模型框架,所有服务均可用MAL消息格式进行规范化的描述,在此基础上建立了MAL消息格式与CCSDS空间包的映射关系,从而以CCSDS空间包为信息栽体实现了航天器与地面系统间的任务操作通信,可以作为以服务为导向的任务操作系统实际工程应用的参考.     

An Overview of the Fast Auroral SnapshoT (FAST) Satellite

The FAST satellite is a highly sophisticated scientific satellite designed to carry out in situ measurements of acceleration physics and related plasma processes associated with the Earth's aurora. Initiated and conceptualized by scientists at the University of California at Berkeley, this satellite is the second of NASA's Small Explorer Satellite program designed to carry out small, highly focused, scientific investigations. FAST was launched on August 21, 1996 into a high inclination (83°) elliptical orbit with apogee and perigee altitudes of 4175 km and 350 km, respectively. The spacecraft design was tailored to take high-resolution data samples (or `snapshots') only while it crosses the auroral zones, which are latitudinally narrow sectors that encircle the polar regions of the Earth. The scientific instruments include energetic electron and ion electrostatic analyzers, an energetic ion instrument that distinguishes ion mass, and vector DC and wave electric and magnetic field instruments. A state-of-the-art flight computer (or instrument data processing unit) includes programmable processors that trigger the burst data collection when interesting physical phenomena are encountered and stores these data in a 1 Gbit solid-state memory for telemetry to the Earth at later times. The spacecraft incorporates a light, efficient, and highly innovative design, which blends proven sub-system concepts with the overall scientific instrument and mission requirements. The result is a new breed of space physics mission that gathers unprecedented fields and particles observations that are continuous and uninterrupted by spin effects. In this and other ways, the FAST mission represents a dramatic advance over previous auroral satellites. This paper describes the overall FAST mission, including a discussion of the spacecraft design parameters and philosophy, the FAST orbit, instrument and data acquisition systems, and mission operations.