Convective motions in liquid metals for material processings. Numerical simulation of oscillation regimes and effect of rotation

The paper is concerned with the numerical simulation and the analysis of some kinds of flow regimes which can develop in Bridgman and Czochralski systems for material processings. The flows in the liquid phase are investigated considering two-dimensional and axisymmetric models. The time-dependent regimes were studied for a zero-Prandtl-number fluid layer confined inside a two-dimensional cavity of aspect ratio (length-to-height) A=4, involving a stress-free upper surface and submitted to a horizontal temperature gradient. The range of Grashof number was varied up to the conditions at which the flow goes from oscillatory to chaotic type behaviours. The combined influence of the temperature gradients and of the rotations of the crucible and of the seed/crystal was investigated for a Czochralski model. The axisymmetric regimes were studied for a Pr_m=0.015 liquid melt confined inside a cylindrical crucible of aspect ratio (height-to-radius) A_m=2, and coupled to a viscous encapsulant liquid layer (10<Pr_e<1200) of aspect ratio A_e=0.5. A number of steady and (transient) time-dependent flow patterns are identified.     

Numerical simulation of organic compounds formation in planetary atmospheres: comparison with laboratory experiments.

A numerical model of CH4 and CH4-NH3 photochemistry at 147 nm has been developed and results are directly compared with experimental simulations carried out for the same mixtures. Simulations with varying quantities of ammonia and hydrogen show how amines and nitriles can be produce in planetary atmospheres. These comparisons allow one to test schemes of reactions used in photochemical models. In particular, it is shown that the scheme of reactions of CH4 is fairly well consistent with experimental data. On the other hand, the photochemistry of NH3 should be improved.     

Energetic metabolism response in algae and higher plant species from simulation experiments with the clinostat.

Adenylate state is acknowledged to be among the most convenient approaches in the study of physiological changes in plant cells under simulation of altered gravity condition with the clinostat. Adenylate levels and the ATP/ADP ratio in cytoplasmic and mitochondrial extracts of cultivated cells of Haplopappus gracilis and algae cells of Chlorella vulgaris under initial stages of the fast-rotating and slow-rotating clinorotation, as well as the long-term clinorotation, have been investigated. For analysis of ATP and ADP levels in the plant cells under the clinorotation, we applied a high-sensitive bioluminescence method using the luciferase and piruvate kinase enzyme systems. It has been shown that the adenylate ratio is already increased during at the start of clinorotation with the different speed of rotation in the biological material tested. The considerable changes in mitochondrial ultrastructure of Chlorella cells, as well as the rising ATP level and dropping of the ATP/ADP ratio appear after long-duration clinorotation if compared to control material. It is probably connected with the distinctions in ATP-synthetase functioning in mitochondria of the cells under the clinorotation conditions.     

The role of computerized modeling and simulation in the development of life support system technologies.

Using conventional means of process development, it would take decades and hundreds of millions of dollars to develop technology for recycling of water and solid waste for lunar missions within the next thirty years. Since we anticipate neither that amount of time nor level of funding, new methodologies for developing life support systems (LSS) technologies are essential. Computerized modeling and simulation (CMAS) is a tool that can greatly reduce both the time and cost of technology development. By CMAS, we refer to computer methods for correlating, storing and retrieving property data for chemical species and for solving the phenomenological equations of physical/chemical processes (i.e., process conditions based on properties of materials and mass and energy balances, equipment sizing based on rate processes and the governing equations for unit operations). In particular, CMAS systems can be used to evaluate a LSS process design with minimal requirements for laboratory experimentation. A CMAS model using ASPEN PLUS is presented for a vapor compression distillation (VCD) system designed for reclaiming water from urine.     

A simulation analysis of systematic errors in ion arrival angle and drift velocity from the satellite borne ion drift meter

As one payload of a Chinese seismic satellite program, an ion drift meter (IDM) will measure drift velocity of thermal ions at an altitude of 500 km. Previous works have shown that such instruments use biased grids to create nonuniform potential in the grid planes, which brings systematic errors to the inferred parameters. A commercial finite element analysis software is used to simulate this instrument in the exact size. The error sources from thermal velocity, nonuniform transparency of real grids and potential depression in the grid planes are explained. The simulation results show that the arrival angle and drift velocity will be underestimated in all the conditions and the maximal error will be about −0.87° and −121 m/s, respectively. Furthermore, the relative error of the inferred arrival angle and the drift velocity will be inversely correlated with the arrival angle because of the lensing effect of the potential depression. This simulation provides a quantificational method of evaluating and correcting the data during in situ operation.     

Critical issues in connection with human missions to Mars: protection of and from the Martian environment.

Human missions to Mars are planned to happen within this century. Activities associated therewith will interact with the environment of Mars in two reciprocal ways: (i) the mission needs to be protected from the natural environmental elements that can be harmful to human health, the equipment or to their operations; (ii) the specific natural environment of Mars should be protected so that it retains its value for scientific and other purposes. The following environmental elements need to be considered in order to protect humans and the equipment on the planetary surface: (i) cosmic ionizing radiation, (ii) solar particle events; (iii) solar ultraviolet radiation; (iv) reduced gravity; (v) thin atmosphere; (vi) extremes in temperatures and their fluctuations; and (vii) surface dust. In order to protect the planetary environment, the requirements for planetary protection as adopted by COSPAR for lander missions need to be revised in view of human presence on the planet. Landers carrying equipment for exobiological investigations require special consideration to reduce contamination by terrestrial microorganisms and organic matter to the greatest feasible extent. Records of human activities on the planet's surface should be maintained in sufficient detail that future scientific experimenters can determine whether environmental modifications have resulted from explorations.     

Extraterrestrial organic chemistry: from the interstellar medium to the origins of life. Part 2: complex organic chemistry in the environment of planets and satellites.

During COSPAR'00 in Warsaw, Poland, in the frame of Sub-Commission F.3 events (Planetary Biology and Origins of Life), part of COSPAR Commission F (Life Sciences as Related to Space), and Commission B events (Space Studies of the Earth-Moon System, Planets, and Small Bodies of the Solar System) a large joint symposium (F.3.4/B0.8) was held on extraterrestrial organic chemistry. Part 2 of this symposium was devoted to complex organic chemistry in the environment of planets and satellites. The aim of this event was to cover and review new data which have been recently obtained and to give new insights on data which are expected in the near future to increase our knowledge of the complex organic chemistry occurring in several planets and satellites of the Solar System, outside the earth, and their implications for exobiology and life in the universe. The event was composed of two main parts. The first part was mainly devoted to the inner planets and Europa and the search for signatures of life or organics in those environments. The second part was related to the study of the outer solar system.     

Signal transduction in T lymphocytes--a comparison of the data from space, the free fall machine and the random positioning machine.

In this paper we discuss the effect of microgravity on T cells and we present the data of studies with two new machines for 0 g simulations. Several experiments in space show that mitogenic T cell activation is lost at 0 g. Immunocytochemistry indicates that such effect is associated with changes of the cytoskeleton. Biochemical studies suggest that the lack of expression of the interleukin-2 receptor is one of the major causes of the loss of activity. In fact, interleukin-2 is the third signal required for full activation. In order to deepen our investigations we are now working with the free-fall machine, FFM, invented by D. Mesland, and with the random positioning machine, RPM, or three-dimensional clinostat, developed by T. Hoson. The FFM produces periods of free-fall lasting approximately 800 ms followed by bounces of 15-30 g lasting 45-60 ms. The RPM eliminates the effect of gravity by rotating biological specimen randomly around two orthogonal axes. While the FFM failed to reproduce the results obtained with T lymphocytes in space, the data from the RPM are in good agreement with those in real microgravity. In fact, the inhibition of the mitotic index in the RPM is 89% compared to static controls. The RPM (as the FFM) can carry markedly larger specimen than the fast rotating clinostat and thus allows to conduct comprehensive studies to select suitable biological objects for further investigations in space.