GH4169G整体叶盘阶梯铣削稳定性研究

为解决高强高温合金GH4169G整体叶盘叶片铣削加工不稳定问题,通过有限元分析的方法,分析了沿大径方向(叶片宽度)和轴向(叶身方向)两种逐层铣削方案对加工稳定性的影响,研究了阶梯铣削工艺和传统双面对称铣削工艺对整体叶盘叶片铣削稳定性的影响.结果表明:沿大径方向逐层加工时,其理论绝对稳定极限切削深度小于实际加工中可能的最大切削深度,主轴转速、切削深度等切削参数选择范围较小;而沿轴向逐层加工时,其理论绝对稳定极限切削深度大于实际加工中可能的最大切削深度.与传统双面对称铣削工艺相比,阶梯铣削工艺使整体叶盘叶片的刚度得到提高,相同载荷下叶片的最大变形量降低了60%,其前6阶模态频率均较高,加工过程更稳定,加工出的叶片能满足设计要求.      

基于优化STD法的大飞机垂尾装配界面精加工过程模态参数识别

为减小大飞机垂尾装配界面精加工过程中产生的加工振动对其精加工质量的影响，需掌握装配界面加工过程的动力学特性，而动力学特性与其模态参数密切相关。因此，为获得装配界面各阶模态参数，针对其动态精加工过程，提出了一种优化STD环境激励下结构模态参数识别方法。该方法首先由装配界面的实测加工振动数据构造Toeplitz矩阵，并将其作为STD法的输入，进而求出装配界面各阶次模态参数，并构成模态参数下三角矩阵。然后利用模态置信因子及模态保证准则选出阶次相对稳定的模态参数作为装配界面的真实模态参数。最后，通过切削实验和锤击测试验证优化STD法的正确性和有效性。将锤击实验模态结果作为装配界面的模态参数测量参考值，以一阶模态频率识别结果为例，该方法相比于传统STD法和SSI法，识别精度分别提高了12.71%和3.82%；同理其余各阶模态参数识别精度均有不同程度的提高。通过优化STD法可准确高效地获得装配界面的模态参数，为其精加工工艺参数的合理选择提供了理论依据和技术支持。     

基于新型电涡流阻尼器的大飞机垂尾装配界面精加工振动抑制

大飞机垂尾装配界面是由钛合金制成的大型结构件,由于结构刚度低,在精加工时易产生振动、回弹变形和让刀等现象,对其精加工质量造成严重影响。为此,基于电磁感应原理设计了一款新型电涡流阻尼器用于抑制装配界面精加工中的多模态振动。首先,介绍了阻尼器的结构,并建立了其阻尼特性的理论模型。然后,基于该模型分别研究了不同磁极厚度、导体厚度和磁极数等对阻尼器阻尼特性的影响,并确定了阻尼器关键零组件的材料及几何参数。基于此,建立了装配界面抑制系统的动力学模型,并通过数值分析和有限元仿真方法得到了装配界面振动速度与阻尼器阻尼特性的变化规律。最后,通过动力学测试和切削实验对阻尼器的抑振性能进行了验证。锤击测试结果表明该阻尼器能明显提高装配界面抑振系统的阻尼比和等效刚度,阻尼比最大能提高2.17倍,等效刚度最大能提高1.65倍,能大幅衰减装配界面在冲击激励下产生的自由振动。切削实验结果表明该阻尼器能显著提升装配界面精加工过程的稳定性,装配界面时域信号的振动幅值最大能降低64.4%。通过对比实验结果得知双阻尼器配置对装配界面的抑振效果更好,能明显提高其动态可加工性,工艺参数轴向切深能提高至2.0 mm,主轴转速可提升至500 r/min,这为保证和提高装配界面的精加工质量提供了一种简单可行的解决方案。     

材料切除对机匣铣削动力学与稳定性的影响

在薄壁零件加工过程中,工件材料的连续切除会造成工艺系统动力学特性的不断变化,并对工艺系统的颤振稳定性产生显著影响。以航空发动机机匣为对象,研究了其铣削过程中工件材料切除以及切削位置变化对工件动力学特性与颤振稳定性的影响规律。首先,根据机匣的几何结构与铣削工艺特点,提出了按切削行及切削段进行材料切除过程细分的方法。其次,建立了工艺系统动力学特性演化的快速计算方法和颤振稳定性极限的频域预测方法,并在单个切削行内和不同切削行间分析了材料切除过程对工艺系统的影响。结果显示,在单个切削行内工艺系统的动力学特性会小幅度减小,稳定性极限图会向左下方小幅度偏移;在不同切削行间工艺系统的动力学特性变化幅度较大,稳定性极限图呈现出交错排列现象,难以针对整个铣削过程进行切削参数优选,因此提出了基于单行刀位轨迹的切削参数优选方法,保证了整个材料切除过程的稳定切削。最后,进行了机匣铣削与模态试验,验证了所提方法的正确性与有效性。     

不分离型超声复合铣削系统稳定性研究

为研究不分离型超声复合铣削系统的稳定性,讨论了超声复合铣削运动特性,建立了不分离型超声复合铣削稳定性模型。利用半离散法对超声复合铣削稳定性进行研究,应用MATLAB软件进行数值分析并得出了超声铣削稳定性叶瓣图。研究表明,不分离型超声复合铣削能提高普通铣削系统的稳定性,最大极限切削深度提高约13.8%。利用钛合金材料进行超声复合铣削的试验验证,试验结果验证了理论模型与稳定性叶瓣图的正确性,同时也验证了利用半离散法分析超声复合铣削系统稳定性的可行性。     

立铣加工颤振稳定性时域求解与分析研究(英文)

In this paper, the instantaneous undeformed chip thickness is modeled to include the dynamic modulation caused by the tool vibration while the dynamic regenerative effects are taken into account. The numerical method is used to solve the differential equations goveming the dynamics of the milling system. Several chatter detection criteria are applied synthetically to the simulated signals and the stability diagram is obtained in time-domain. The simulation results in time-domain show a good agreement with the analytical prediction, which is validated by the cutting experiments. By simulating the chatter stability lobes in the time-domain and analyzing the influences of different spindle speeds on the vibration amplitudes of the tool under a Fixed chip-load condition, conclusions could be drawn as follows： In rough milling, higher machining efficiency can be achieved by selecting a spindle speed corresponding to the axial depth of cut in accordance with the simulated chatter stability lobes, and in Fmish milling, lower surface roughness can be achieved by selecting a spindle speed well beyond the resonant frequency of machining system.     

Optimal interface surface determination for multi-axis freeform surface machining with both roughing and finishing

In the current practice of multi-axis machining of freeform surfaces, the interface surface between the roughing and finishing process is simply an offset surface of the nominal surface. While there have already been attempts at minimizing the machining time by considering the kinematic capacities of the machine tool and/or the physical constraints such as the cutting force, they all target independently at either the finishing or the roughing process alone and are based on the simple premise of an offset interface surface. Conceivably, since the total machining time should count that of both roughing and finishing process and both of them crucially depend on the interface surface, it is natural to ask if, under the same kinematic capacities and the same physical constraints, there is a nontrivial interface surface whose corresponding total machining time will be the minimum among all the possible (infinite) choices of interface surfaces, and this is the motivation behind the work of this paper. Specifically, with respect to the specific type of iso-planar milling for both roughing and finishing, we present a practical algorithm for determining such an optimal interface surface for an arbitrary freeform surface. While the algorithm is proposed for iso-planar milling, it can be easily adapted to other types of milling strategy such as contour milling. Both computer simulation and physical cutting experiments of the proposed method have convincingly demonstrated its advantages over the traditional simple offset method.     

Chatter stability prediction in four-axis milling of aero-engine casings with bull-nose end mill

An analytical model for chatter stability prediction in bull-nose end milling of aero-engine casings is presented in this paper. And the mechanics and dynamics variations due to the complex cutter and workpiece geometry are considered by analyzing the effects of the lead angle on the milling process. Firstly, the tool-workpiece engagement region is obtained by using a previously developed method and divided into several disk elements along the tool-axis direction.Secondly, a 3D dynamic model for stability limit calculation is developed and simplified into a 1D model in normal direction considering only the dominant mode of the workpiece. Then the cutting force coefficients, the start and exit angles corresponding to each disk element are determined. And the total stability lobe diagram is calculated using an iterative algorithm. Finally, several experimental tests are carried out to validate the feasibility and effectiveness of the proposed prediction approach.     

基于粘弹性材料的五轴铣削加工被动抑振技术

针对薄壁件在铣削过程中极易出现颤振,且动力学特性快速变化导致切削稳定性多变的特点,研究基于粘弹性材料的被动阻尼技术,以增加薄壁零件阻尼、提升切削稳定性。提出阻尼层、约束层以及质量层的设计方案,模态试验表明该技术能大幅提升薄壁件阻尼,且对多阶振动模态有抑制作用。最后,将其应用于薄壁S样件的五轴铣削加工试验,多组切削参数下的试验结果表明,工件切削振动幅值最大可下降约97%。     

Five-axis flank milling tool path generation with curvature continuity and smooth cutting force for pockets

In order to ensure machining stability, curvature continuity and smooth cutting force are very important so as to meet the constraints of both cutting force and kinematics of machine tools. For five-axis flank milling, it is difficult to meet both of the constraints because tool path points and tool axis vectors interact with each other. In this paper, multiple relationships between tool path points and tool axis vectors with cutting force and kinematics of machine tools are established, and the strategies of corner-looping milling and clothoidal spirals are combined so as to find feasible solutions under both of the constraints. Tool path parameters are iterated by considering the maximum cutting force and the feasible range of the tool axis vector, and eventually a curvature continuity five-axis flank milling tool path with smooth cutting force is generated. Machining experimental results show that the conditions of cutting force are satisfied, vibration during the process of machining is reduced, and the machining quality of the surface is improved.     

飞机蒙皮镜像铣加工稳定性分析

镜像铣技术是近年来提出的一种针对大尺寸薄壁件的加工方法,其加工环保、高效,具有逐步取代传统化铣加工的趋势。针对飞机蒙皮镜像铣加工过程中的颤振问题,首先,根据镜像铣加工特点,建立工艺系统颤振稳定性极限的预测模型;其次,通过有限元方法对蒙皮工件进行模态分析,分析蒙皮不同加工位置动力学特性变化导致的铣削稳定性变化,并通过实验测量获取工件动力学参数,对不同加工位置的稳定性做出预测;最后,开展加工实验,基于非接触测量方法,在线监测镜像铣加工区域的振动位移,通过时、频域信号对加工状态进行辨识,揭示了镜像铣加工过程的稳定性变化及失稳机制,验证了所提方法的准确性,在工程领域具有较高的实用价值。     

螺旋铣孔技术研究进展

各种连接孔的加工是航空航天构件装配中的重要工作之一。新型大型飞机等难加工材料使用越来越多、制孔孔径深度越来越大、制孔精度质量要求越来越高，使得制孔加工变得越发困难，传统制孔方法逐渐不能满足需求。螺旋铣孔是一种针对航空航天构件装配制孔需求出现的新技术，其采用特制刀具通过偏心铣削的方式实现圆孔加工。由于材料去除原理改变，螺旋铣孔相对传统制孔方法在加工精度、生产效率、刀具成本、适用性等多个方面表现出优势，成为当前航空航天领域制孔技术的研究热点之一。首先在阐述螺旋铣孔基本原理的基础上分析了其技术优势；然后重点围绕加工机理与专用装备两个方面，概述了螺旋铣孔技术的发展现状；最后，分析了螺旋铣孔技术的发展趋势。     

Time-domain modeling of a cutter exiting a workpiece in the slot milling process

In a milling operation, there must be processes of a cutter entering and exiting the work-piece boundary. The cutter exit is usually in the feed direction and the dynamic response is different from that in the normal cutting process. This paper presents a new time-domain modeling of mechanics and dynamics of the cutter exit process for the slot milling process. The cutter is assumed to exit the workpiece for the first time with one tooth right in the feed direction. The dynamic chip thickness is summed up along the feed direction and compared with the remaining workpiece length in the feed direction to judge whether the cutter is ready to exit the workpiece or not. The developed model is then used for analyzing the cutting force and machining vibration in the cutter exit process. The developed mathematical model is experimentally validated by comparing the simulated forces and vibrations against the measured data collected from real slotting milling tests. The study shows that stable cutting parameters cannot guarantee stable cutting in a cutter exit process and further study can be performed to control the vibration amplitude in this specific process.     

微细电解铣削加工模型及实验研究

 对微细电解铣削加工技术进行了深入研究。将分层加工技术应用到微细电解加工过程中,显著改善了加工稳定性;建立了微细电解铣削加工的数学模型;基于电化学刻蚀原理,在线制得直径小至10 μm的圆柱电极;分组实验并验证了加工模型中各参数如：电极直径、加工电压、电解液浓度、铣削层厚度等对微细电解铣削加工精度的影响。通过优化加工参数,成功加工出了深三角结构和四棱台微型腔,形状精度高,加工稳定性好。     

Feedrate scheduling method for constant peak cutting force in five-axis flank milling process

It is extremely important to select appropriate feedrates for the stable machining of parts with ruled surface in modern aviation industrial applications. However, the current studies take too much time to achieve this goal. Therefore, this paper presents an efficient feedrate optimization method for constant peak cutting force in five-axis flank milling process. The solution method of the instantaneous undeformed chip thickness (IUCT) is proposed using least squares theory with the cutter entry angle and feedrate as variables. Based on this method, an explicit analytical expression of the peak cutting force for each cutting point is established. Furthermore, a feedrate scheduling method is developed to quickly solve the appropriate feedrate under constant peak cutting force. To verify the proposed IUCT model, the fitting IUCT is compared with the accuracy data at different feedrates. Additionally, some experiments of five-axis flank milling are conducted to demonstrate the effectiveness of the peak force model and the feedrate scheduling method. And the surface roughness before and after feedrate scheduling is detected. The results show that the proposed feedrate scheduling method can quickly adjust the feedrate and ensure constant peak force during machining. At the same time, the surface quality is kept at a high level.     

Prediction of cutting forces in flank milling of parts with non-developable ruled surfaces

Predicting the cutting forces required for five-axis flank milling is a challenging task due to the difficulties involved in determining the Undeformed Chip Thickness(UCT) and CutterWorkpiece Engagement(CWE). To solve these problems, this paper presents a new mechanistic cutting force model based on the geometrical analysis of a flank milling process. In the model,the part feature and corresponding cutting location data are taken as input information. The UCT considering cutter runout is calculated according to the instantaneous feed rate of the element cutting edges. A solid-discrete-based method is used to precisely and efficiently identify the CWE between the end mill and the surface being machined. Then, after calibrating the specific force coef-ficients, the mechanistic milling force can be obtained. During the validation process, two practical operations, three-axis flank milling of a vertical surface and five-axis flank milling of a nondevelopable ruled surface, are conducted. Comparisons between predicted and measured cutting forces demonstrate the reliability of the proposed cutting force model.     

Vibration suppression of thin-walled workpiece machining considering external damping properties based on magnetorheological fluids flexible fixture

Milling of the thin-walled workpiece in the aerospace industry is a critical process due to the high flexibility of the workpiece. In this paper, a flexible fixture based on the magnetorheological(MR) fluids is designed to investigate the regenerative chatter suppression during the machining.Based on the analysis of typical structural components in the aerospace industry, a general complex thin-walled workpiece with fixture and damping constraint can be equivalent as a rectangular cantilever beam. On the basis of the equivalent models, natural frequency and mode shape function of the thin-walled workpiece is obtained according to the Euler–Bernoulli beam assumptions. Then,the displacement response function of the bending vibration of the beam is represented by the product of all the mode shape function and the generalized coordinate. Furthermore, a dynamic equation of the workpiece-fixture system considering the external damping factor is proposed using the Lagrangian method in terms of all the mode shape function and the generalized coordinate, and the response of system under the dynamic cutting force is calculated to evaluate the stability of the milling process under damping control. Finally, the feasibility and effectiveness of the proposed approach are validated by the impact hammer experiments and several machining tests.     

Analytical model of cutting force in axial ultrasonic vibration-assisted milling in-situ TiB2/7050Al PRMMCs

Ultrasonic vibration-assisted milling has been widely applied in machining the difficult-to-cut materials owing to the remarkable improvements in reducing the cutting force. However, analytical models to reveal the mechanism and predict the cutting force of ultrasonic vibration-assisted milling metal matrix composites are still needed to be developed. In this paper, an analytical model of cutting force was established for ultrasonic vibration-assisted milling in-situ TiB₂/7050Al metal matrix composites. During modeling, change of motion of the cutting tool, contact of tool-chip-workpiece and acceleration of the chip caused by ultrasonic vibration was considered based on equivalent oblique cutting model. Meanwhile, material properties, tool geometry, cutting parameters and vibration parameters were taken into consideration. Furthermore, the developed analytical force model was validated with and without ultrasonic vibration milling experiments on in-situ TiB₂/7050Al metal matrix composites. The predicted cutting forces show to be consistent well with the measured cutting forces. Besides, the relative error of instantaneous maximum forces between the predicted and measured data is from 0.4% to 15.1%. The analytical model is significant for cutting force prediction not only in ultrasonic-vibration assisted milling but also in conventional milling in-situ TiB₂/7050Al metal matrix composites, which was proved with general applicability.     

整体叶盘盘铣加工切削力及刀具磨损实验研究

本文对整体叶盘开槽粗加工时从切削速度、进给量、径向切深等切削参数对切削力的影响进行研究。选用正交实验的方法进行盘铣切削实验,得到切削参数对切削力的影响变化规律,并对刀具在切削过程中的磨损进行分析,进一步验证优化的切削参数,为整体叶盘的盘铣加工参数的合理制定与加工工艺的优化提供参考。     

薄壁叶片叶型多工序加工检验模型建立方法

为了提高叶片的加工质量、降低叶片成品的废品率和加工成本，以航空发动机薄壁叶片数控铣削、抛光、振动光饰、喷丸强化的典型加工工艺为研究对象，提出了一种面向多工序的加工变形误差补偿方法及加工检验模型的建立方法。分析各工序的加工变形规律，将多工序变形误差作为一个整体，利用反变形误差补偿方法建立数控精铣工序的加工模型。图纸要求的理论模型只作为最终检验模型，而工序检验模型根据后续加工误差累加对最终检验模型修改得到。通过实例验证，该方法有效地降低了叶片工序检验结论的误判率，保证了工序检验合格及最终检验合格的要求。