The Performance of an LMS Adaptive Array with Frequency Hopped Signals

The performance of an LMS adaptive array with a frequency hopped, spread spectrum desired signal and a CW interference signal is examined. It is shown that frequency hopping has several effects on an adaptive array. It causes the array to modulate both the amplitude and the phase of the received signal. Also, it causes the array output SINR (signal-to-interference-plus-noise ratio) to vary with time and thus increases the bit error probability for the received signal. Typical curves of the desired signal modulation and the time-varying SINR at the array output are presented. It is shown how the array performance depends on hopping frequency, frequency jump size, interference frequency, signal arrival angles, and signal powers.     

The Effect of a Pulsed Interference Signal on an Adaptive Array

The performance of a least mean square (LMS) adaptive array in the presence of a pulsed interference signal is examined. It is shown that a pulsed interference signal has two effects. First, it causes the array to modulate the desired signal envelope (but not its phase). Second, it causes the array output signal-to-interferenceplus-noise ratio (SINR) to vary with time. The desired signal modulation is evaluated as a function of signal arrival angles, powers and interference pulse-repetition frequency (PRF) and pulsewidth. It is shown that the signal modulation is small except when the interference arrives close to the desired signal. To evaluate the effect of the time-varying SINR, it is assumed that the array is used in a differential phase-shift keyed (DPSK) communication system. It is shown that the SINR variation causes a noticeable but not disastrous increase in the bit error probability.     

Adaptive Array Behavior with Sinusoidal Envelope Modulated Interference

The behavior of a LMS (least mean square) adaptive array with modulated interference is described. An interference signal with sinusoidal, double-sideband, suppressed-carrier modulation is assumed. It is shown that such interference causes the array to modulate the desired signal envelope but not its phase. The amount of the desired signal modulation is determined as a function of signal arrival angles and powers and the modulation frequency of the interference. Such interference also causes the array output signal-to-interference-plus-noise ratio (SINR) to vary with time. However, it is shown that when the desired signal is a digital communication signal, the averaged bit error probability is essentially the same as for continuous wave (CW) interference.     

Adaptive Array Behavior with Periodic Phase Modulated Interference

We consider a least mean square (LMS) adaptive array [1] receiving a phase modulated interference signal. The phase modulation is assumed to be periodic and to have finite bandwidth. Under these assumptions, we determine the time-varying array weights, the modulation on the array output desired signal, and the time-varying output interference-to-noise ratio (INR) and SINR (signal-to-interference-plus-noise ratio). We present numerical results describing the behavior of a 2-element adaptive array that receives an interference signal with sinusoidal phase modulation. We show how each signal parameter (arrival angle, power, modulation index, and modulation frequency) affects the performance of the array.     

An Lms Adaptive Array Using a Pilot Signal

A least mean square (LMS) adaptive array requires a reference signal. When the desired signal contains a pilot signal, it may be used as the reference signal. In this paper the steady-state performance of an LMS adaptive array in which the pilot signal is used as the reference signal is examined. It is shown that the LMS adaptive array occasionally suppresses the desired signal. The loop gain, which is an important parameter, is also considered.     

The Effects of Gaussian Interference on Communication Systemswith Adaptive Arrays

The performance of a bandlimited binary phase-shift-keyed (BPSK) communication system is examined when the received BPSK signal is corrupted by both thermal noise and a directional Gaussian noise interfering signal. The system uses an LMS adaptive array to suppress this interference. The effects of signal power levels, arrival angles, bandwidths, and the array bandwidth are examined. The performance of a system that uses tapped delay lines for the array weights is also examined. It is shown that the performance of a system with tapped delay lines is not affected by the interference bandwidth for a single interferer.     

An LMS Adaptive Array for Multipath Fading Reduction

Multipath fading often poses a serious hindrance in radiocommunication. The application of a least-mean-square (LMS)adaptive array to the problem of multipath fading reduction is discussed. However, it is known that multipath components are in general correlated with one another. We examine the effect of the correlation on the performance of the LMS adaptive array. When the correlation coefficient does not equal or approximate 1, the LMS adaptive array suppresses the multipath signals significantly by nulling. On the other hand, when the correlation coefficient nearly equals 1, the LMS adaptive array prevents the output signalpower from decreasing. Therefore, the LMS adaptive array mayreduce the multipath fading effectively for any correlation coefficient value. A reference signal in the LMS adaptive array is also discussed. It is shown that synchronization in the referencesignal generation must be extremely accurate. Moreover, aprocessor configuration is proposed which may generate thereference signal with the required accuracy.     

The Effect of Random Steering Vector Errors in the Applebaum Adaptive Array

The effect of random errors in the steering vector of an Applebaum adaptive array is examined. Each component of the steering vector is assumed to have a random error component uncorrelated between elements. The array output signal-to-interferenceplus-noise ratio (SINR) is computed as a function of the error variance. It is shown that the array output SINR becomes more sensitive to steering vector errors as more elements are added to the array and as the received desired signal power becomes larger. The variance of the steering vector error that may be tolerated depends on the required desired signal dynamic range. The larger the dynamic range that must be accommodated, the smaller the error variance must be.     

基于Kalman滤波的GPS/INS接收机自适应干扰抑制方法

 考虑到惯导信息辅助GPS(GPS/INS)接收机对干扰抑制实时性的要求,提出一种基于Kalman滤波的GPS/INS接收机自适应干扰抑制方法。自适应广义旁瓣相消(GSC)多采用低复杂度最小均方(LMS)算法更新权矢量,收敛速率较低,严重时会导致接收机定位中断。首先利用Householder变换构建GSC下支路的阻塞矩阵,用于阻塞任意二维阵型阵列接收的期望信号;再用Kalman滤波自适应更新下支路权矢量,从而有效提高阵列输出信干噪比(SINR)。理论分析和仿真结果说明本文方法可有效抑制干扰对接收机的影响,且具有实时性高的特点。     

Reference Loop Phase Shift in an N-Element Adaptive Array

Adaptive arrays based on the LMS algorithm require the generation of a reference signal which is usually derived from the array output. A particular problem associated with this technique is that of a phase shift in the reference signal loop. The effects of this phase shift on the performance of an N-element adaptive array are discussed. It is shown that a reference loop phase shift causes the array weights to cycle, thereby frequency translating the signals at the output. The weight-cycling frequency is related to various system parameters of an N-element array. In particular, it is observed that the cycling frequency increases as the number of antennas (N) increases.     

Median cascaded canceller for robust adaptive array processing

A median cascaded canceller (MCC) is introduced as a robust multichannel adaptive array processor. Compared with sample matrix inversion (SMI) methods, it is shown to significantly reduce the deleterious effects of impulsive noise spikes (outliers) on convergence performance of metrics; such as (normalized) output residue power and signal to interference-plus-noise ratio (SINR). For the case of no outliers, the MCC convergence performance remains commensurate with SMI methods for several practical interference scenarios. It is shown that the MCC offers natural protection against desired signal (target) cancellation when weight training data contains strong target components. In addition, results are shown for a high-fidelity, simulated, barrage jamming and nonhomogenous clutter environment. Here the MCC is used in a space-time adaptive processing (STAP) configuration for airborne radar interference mitigation. Results indicate the MCC produces a marked SINR performance improvement over SMI methods.     

圆台阵列杂波模型及空时二维自适应处理

针对圆台共形阵列,建立了空时二维自适应处理(STAP)的杂波模型,给出了圆台阵列杂波抑制最优权值的计算方法。在此基础之上,为了实现可应用到实际环境中的自适应处理方法,进一步讨论了将局部联合域(JDL)降维算法推广至圆台阵列中的问题。得出了圆台阵列JDL算法降维变换矩阵的表达形式,研究了参考波束的数目选取、波束指向等因素对降维损失的影响。理论分析以及仿真结果表明,通过合理选择通道数、波束方位向指向间隔等参数,该算法能够减少自适应波束形成的计算量,而且可以用较少的训练样本获得较好的处理性能。     

Improved Feedback Loop for Adaptive Arrays

This paper is concerned with the problem of time constants in adaptive arrays. The paper presents a improved form of an adaptive array feedback loop, which has the property that its time constants are fixed. This property is an advantage over the well-known least mean square (LMS) loop, for which time constants depend on received signal power. Fixed time constants are of interest because they simplify dynamic range problems for adaptive arrays in communication and radar systems.     

4×4单元面阵自适应天线系统的设计与实现

面阵系统所采用阵元数多,数据量大,对信号处理机的实时处理能力要求非常高。系统采用基于参考信号的LMS算法,收敛速度较快、运算量低．且易于硬件实现。系统平台采用目前流行的DSP＆FPGA架构,具有高速运算和处理能力,解决了面阵系统对实时处理机的苛刻要求。测试结果表明,系统能自适应地控制天线阵列方向图在用户信号方向产生高增益波束,在干扰信号方向产生较深零陷,并实现零误码率通信。     

Adaptive Array Behavior with Periodic Envelope Modulated Interference

A method is presented for determining the effects of envelope modulated interference on a least mean square (LMS) adaptive array. The interference is assumed to have periodic envelope modulation with a bandwidth that is small compared with the carrier frequency. For such interference, the method allows one to calculate the periodic steady-state behavior of the array weights and the resulting array performance. As an example, we compute the effects of an ordinary amplitude modulated (AM) interference signal on the array. It is shown that such interference causes the array to modulate the desired signal envelope but not its phase. With a differential phase-shift-keyed (DPSK) desired signal, AM interference is found to have about the same effect on bit error probability as CW interference.     

Results from a Four-Element Adaptive Antenna Experiment

Experimental results from a four-element, linear, half-wavelength spacing, adaptive-array antenna under the control of the least mean square (LMS) algorithm are presented. The array is found to be capable of nulling a 70-MHz signal to -35 dB below a desired signal over a 5-MHz bandwidth. The antenna processing gain is constant over a desired signal-to-jammer signal power ratio range from -20 dB to 5 dB. A sharp reduction in processing gain is observed for angular separations between jammer and desired signal of less than 10°. Antenna patterns taken with weights set in 300 iterations of the LMS algorithm show that the one strong, one weak jammer combination has a longer weight convergence time and reduced processing gain compared with a two strong jammers combination. Contours of constant desired signal-to-jammer signal power ratio, after adaptive antenna processing, reveal a complex shape for communication between air and ground due to the finite angular resolution of the adaptive antenna.     

小波域的自适应波束形成算法

在分析传统自适应波束形成的基础上,首次提出了一种小波域的自适应波束形成算法。与通常的自适应波束形成算法相比,该算法利用小波变换对小波空间进行了分解,信号经小波变换自相关性会下降,收敛速度提高,同时在此分解过程中,根据信号与白噪声在不同尺度上的小波变换模极大值表现完全不同的特性进行信号的消噪。理论分析和仿真结果表明了该算法收敛速度较快,且计算量增加较少,易于实时实现,而且具有较好性能。同时仿真实验表明该算法收敛速度与小波基和尺度的选择有关,尺度越大收敛速度越快;对于同一小波基系列,小波基的正则性越好收敛速度越快。     

An Adaptive Array Signal Processing Algorithm for Communications

An algorithm is described for initial synchronization in a communication system with a digital adaptive array. This algorithm can also be used for message extraction. A set of consecutive complex video samples of the array output is processed to obtain optimum adaptive array weights, based on a least mean square (LMS) error criterion. This computation is performed for each of the possible alternative signals which may be present during an observation interval. The correct synchronization time or message symbol is selected as the one which yields the minimum LMS error. Assuming orthogonality of the alternative codes, a probability distribution for the output of this processor has been derived.     

有源对消隐身系统设计研究

针对有源对消隐身要求的系统延时短、反应速度快、信号参数测量和对消波幅相控制精度高的特点,设计了一个基于相控阵技术、数字射频存储器(DRFM)和现场可编程门阵列(FPGA)的有源对消系统。为了解决目标雷达散射截面计算量太大、不能有流水线延迟和难以实现实时计算等问题,采用离线计算的方法,预先建立目标的全向雷达散射截面(RCS)数据库、杂波数据库和噪声数据库,由FPGA根据测得的雷达信号参数在数据库中查找到相应的目标回波数据,实时调整对消波的幅度和相位,使对方的雷达接收机始终处于合成方向图的零点。最后通过仿真计算验证了该设计方案的有效性。     

Prediction of Adaptive Array Performance

A direct relationship between the conventional properties of an array and the array performance in an adaptive mode is given. Expressions are provided to obtain the output signal-to-interference-plus-noise ratio (SINR) of an adaptive array in terms of its conventinal pattern and the locations of the desired signal and jammers. These expressions permit one to evaluate the performance of an adaptive array without an exhaustive search for all possible scenarios and parametric values to ascertain that the required performance levels be met. In fact, one can predict the jammer locations for which the array will provide its best and worst performance by observing the conventional pattern. Several examples are provided to demonstrate the relationship between the conventional pattern and the adaptive array performance. The examples include both linear and planar arrays.