Experimental Investigation of the Steady-State Rectified Alternator Model

Equations are derived to describe the steady-state behavior of a salient-pole alternator connected to a full-wave diode bridge. This model is then compared to one developed earlier for rectified superconducting machines. Experimental measurements are included for a 400-Hz aircraft-type alternator, and these are compared with the calculated results. Due to the similarity between the conventional and superconducting models, it is suggested that these results may be indicative of the accuracy for both types.     

Magnetic energy storage devices for small scale applications

The author considers basic principles of magnetic energy storage, structure requirements and limitations, configurations of inductors, attributes of high-T_c superconducting materials including thermal instabilities, a relative comparison with the state-of-the-art high energy density power sources, and refrigeration requirements. A review of superconducting magnetic energy storage (SMES) technology reveals that the advent of high-temperature ceramic superconducting materials and advances in high strength materials and refrigeration technology are likely to facilitate fabrication of smaller SMES units. The design parameters of a micro superconducting magnetic energy unit for Air Force application are presented and discussed     

超导重力仪器:机遇与挑战

超导重力仪器是利用超导电性构建的精密相对重力测量仪器,其工作于4.2K液氦温度,具有仪器固有噪声低、稳定性好的特点。阐述了超导重力仪和超导重力梯度仪两种仪器的工作原理与技术特征,简要介绍了作者所在课题组超导重力仪器研制的进展情况。分析了我国资源勘查用航空超导重力梯度仪研制所面临的机遇与挑战,提出了应对技术挑战的策略方法。     

Steady State Analysis of the Rectified Superconducting Alternator

Equations are derived to predict the electrical behavior of a three-phase superconducting alternator connected to a full-wave bridge rectifier. This is accomplished by expanding a previous analysis for conventional rectified alternators and adding computational impovements. The significance of the work is that it provides a means of calculating certain critical variables such as the ac current in the superconducting field winding and the ac voltage harmonics at the rectified output. A numerical example based on a machine designed for airborne applications is included.     

Battery configurations for multi-megawatt pulse power

The capability of lead-acid batteries for supplying very high power for a short time is explored. The application of such a battery for accelerating a hypersonic plane is used to illustrate the requirements. A technique for analyzing batteries and controlling voltage for pulse loads is described. Evaluation of lead-acid batteries in production and voltage regulation by switching batteries in and out are covered. Alternatives to batteries, including superconducting magnetic energy storage, are discussed     

Modeling the Superconducting Alternator with Thyristor Bridge

Steady state equations are derived for the superconducting alternator with a thyristor bridge (dc) output. This is accomplished by modification of a previous analysis for a machine with a diode bridge. The approach used avoids the need to numerically solve the differential equations for the system, and it is quite efficient in terms of computation time. Numerical simulations for both the diode and thyristor bridge circuits are included for comparison.     

Use of the Tapped Delay Line Adaptive Array to Increase the Number of Degrees of Freedom for Interference Suppression

A conjecture is made that a tapped delay line adaptive array of K elements can be used to suppress more than K - 1 noncoincidentcenter frequency interferers when the interferers operate within afraction of the signal bandwidth. This is possible because of theavailability in the increased number of degrees of freedom. Asimulation study is made verifying this conjecture for the case of atwo-element array and two interferers. Three and five tap sectionsare used in the simulation. The study indicates that the performanceimproves with increasing number of taps.     

Accurately predicting hypersonic transitional flow on cone via a symmetry approach

A new algebraic transition model is proposed based on a Structural Ensemble Dynamics (SED) theory of wall turbulence, for accurately predicting the hypersonic flow heat transfer on cone. The model defines the eddy viscosity in terms of a two-dimensional multi-regime distribution of a Stress Length (SL) function, and hence is named as SED-SL. This paper presents clear evidence of precise predictions of transition onset location and peak heat flux of a wide range of hypersonic Transitional Boundary Layers (TrBL) around straight cone at zero incidence, to an unprecedented accuracy as validated by over 70 measurements for varying five crucial influential factors (Mach number, temperature ratio, cone half angle, nose Reynolds number and noise level). The results demonstrate the universality of the postulated multi-regime similarity structure, in characterizing not only the spatial non-uniform distribution of the eddy viscosity in hypersonic TrBL on cone, but also the dependence of the transition onset location on the five influential factors. The latter yields a novel correlation formula for transition center Reynolds number which takes similar functional form as the SL function within the symmetry approach. It is concluded that the SED-SL model simulates TrBL around cone with uniformly high accuracy, and then points out to an optimistic alternative way to construct hypersonic transition model.     

An application of embedology to spatio-temporal pattern recognition

The theory of embedded time series is shown applicable for determining a reasonable lower bound on the length of test sequence required for accurate classification of moving objects. Sequentially recorded feature vectors of a moving object form a training trajectory in feature space. Each of the sequences of feature vector components is a time series, and under certain conditions, each of these time series has approximately the same fractal dimension. The embedding theorem may be applied to this fractal dimension to establish a sufficient number of observations to determine the feature space trajectory of the object. It is argued that this number is a reasonable lower bound on test sequence length for use in object classification. Experiments with data corresponding to five military vehicles (observed following a projected Lorenz trajectory on a viewing sphere) show that this bound is indeed adequate     

二级入轨载机小涵道比涡扇发动机探讨

对五种涡轮发动机的概念研究表明 :小涵道比涡扇发动机与冲压发动机组合,适于用作二级入轨载机的动力装置。      

簸箕形排孔气膜冷却实验研究

 对五孔单排簸箕形孔气膜冷却进行了实验研究。测出了孔排下游的局部换热系数及冷却效率，并研究了喷气雷诺数及吹风比的影响，实验参数范围是：喷气雷诺数Re=10000～25000,吹风比M=0.3～2.0,测量分26个工况进行。     

Adiabatic demagnetisation refrigerators for future sub-millimetre space missions

Space worthy refrigeration capable of providing a 100 mK and below heat load sink for bolometric detectors will be required for the next generation of sub-millimetre space missions. Adiabatic demagnetisation refrigeration (ADR), being a gravity independent laboratory method for obtaining such temperatures, is a favourable technique for utilisation in space.We show that by considering a 3 salt pill refrigerator rather than the classic single salt pill design the space prohibitive laboratory ADR properties of high magnetic field (6 Tesla) and a<2 K environment (provided by a bath of liquid⁴He) can be alleviated, while maintaining a sufficient low temperature hold time and short recycle time. The additional salt pills, composed of Gadolinium Gallium Garnet (GGG) provide intermediate cooling stages, enabling operation from a 4 K environment provided by a single 4 K mechanical cooler, thereby providing consumable free operation. Such ADRs could operate with fields as low as 1 Tesla allowing the use of high temperature, mechanically cooled superconducting magnets and so effectively remove the risk of quenching.We discuss the possibility of increasing the hold time from 3 hours, for the model presented, to between 40 and 80 hours, plus reducing the number of salt pills to two, through the use of a more efficient Garnet.We believe the technical advances necessitated by the envisaged ADRs are minimal and conclude that such ADRs offer a long orbital life time, consumable free, high efficiency means of milli-Kelvin cooling, requiring relatively little laboratory development.     

Wideband array antenna concept

This presents a unique wideband array concept that includes a wideband array aperture incorporating radiating elements of different sizes and inter-element spacings. The array is a fully-filled aperture consisting of a core region surrounded by several layers of radiating elements which increase in size. By proper selection of the core region and the number of layers, one can form a beam with specified beamwidth over a five to one frequency range. The proposed concept considerably reduces the cost and complexity by decreasing the effective number of radiating elements and the corresponding receive or transmit modules. Numerical simulation results, ignoring the mutual coupling effects, are presented for array patterns at several frequencies to prove the concept. A possible beamforming concept is also included. Additional work is planned to prove the viability of the concept by taking the mutual coupling into account.     

ITER超导线缆铠甲套管超声相控阵检测方法

为实现ITER超导线缆铠甲套管的超声相控阵检测,对铠甲套管的外形结构及缺陷特点的深入了解并参考文献方法,设计制作不同角度U形槽的人工试样;进行多晶片组不同角度入射声场设计,建立理论模型;借助M2M 256×256相控阵设备和Multi2000软件平台进行Multi-Salvo设置,开发基于VC~++6.0平台的客户端软件,实现A扫描的实时显示和数据存储,特殊形状试件的B扫描图像拟合并实时显示等功能。实验结果表明,通过旋转90°检测一次的方式实现铠甲套管的100%相控阵检测。     

前台阶流场的传热实验研究

本文尝试用瞬态实验方法, 在卢德威格风洞实验台上, 对小台阶高度 (H=4.0mm)的前台阶二维流场进行传热实验研究, 测定了当雷诺数为 11800至32200时的流场内热流通量和努谢尔特数的变化规律以及努谢尔特数随雷诺数变化的准则关系式。实验结果是令人满意的。      

复合固体推进剂加压插管浇注的列线图解

根据药浆在圆形管道的牛顿体流动方程和应用加压插管浇注实际情况,选取工艺和设计参数,通过大量计算,做出包括五个变量的列线图.用实例说明列线图的使用方法和用途.实践证明,该方法简捷准确,其精度完全可以满足工程上的要求.     

1 种副孔正交型超声速5 孔探针的设计与应用

针对超声速喷管出口流场Ma和方向角的测量,设计了直径为4 mm的副孔正交型超声速5孔探针。圆锥形测压头半角为20°,测压孔直径为0.4 mm,探针直段长140 mm。分别在亚声速风洞(196个校准点)和超声速风洞(294个校准点)中对5孔探针进行了校准,结果表明:5孔探针在不同Ma下的方向特性曲线具有几何相似性,有较高的角度灵敏度;总压特性系数和静压特性系数均具有良好的对称性。并通过数值计算研究了5孔探针的扰流特性。结合自动位移机构,完成了超声速喷管出口5个截面共315个坐标点的标定,获得了流场的Ma和方向角分布特性。     

基于第二动力技术的TBCC综合能源展望

飞行器电能、液压能和气压能的功率需求由第二动力系统单独做功或提取发动机主轴功率供应。TBCC发动机模态转换后,第二动力系统无法从发动机主轴提取功率。因此,需要解决空天飞行器第二动力系统长时间大功率能量输出的问题。分析航空蓄电池、起动发电机、APU、GTS、ATS和RAT的技术特点、发展现状以及第二动力的发展趋势,结合高超声速飞行器的发展趋势,提出ATS/RAT组合和多电超导发动机/大比能的储能装置技术组合是实现空天高超声速飞行器综合能源的技术路线。     

掺Mg对Bi Pb Sr Ca Cu O体系中110K超导相生成的影响

用固相反应法合成了名义组分为Bi_xPb_ySr₂Ca_1.7Mg_0.3Cu_zO_w的块状超导体。根据直流电阻和交流磁化率测量的结果,给出了在7个不同温度下烧结的6个组分化合物的超导临界温度。在833℃到843.3℃范围内,110K相对80K相的体积比随着烧结温度的提高而增加。分析了断口形貌。对110K相的生成有影响的Pb和Bi在样品中的剩余量受烧结温度和时间的控制。Bi Pb Sr Ca Mg CuO体系之所以能在较低烧结温度下形成超导相是由于掺Mg造成了部分熔点的降低。     

基于超导的重力梯度敏感线圈电磁特性分析

为了利用超导块体的完全抗磁性与敏感线圈的电感变化测量重力梯度,需要对敏感线圈的电磁特性进行分析.利用盘状超导敏感线圈产生磁场,首先分析单匝线圈在场点产生的磁感应强度,再通过叠加得到场点的总磁感应强度.选取设计参数对线圈外小间距范围内的磁感应强度进行计算可知,径向分量沿线圈径向保持稳定值,而轴向分量变化较大.质量块对总磁...