共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
3.
北京空间机电研究所近日完成了一种新型宇航级平板式毛细泵环路热管的研发,并相继通过了耐热、力学、低温真空等环境试验测试,实现了工程化应用.
环路热管是目前最为先进的热控技术之一,其依靠毛细力驱动工质单向循环流动,毛细泵是环路热管最核心部件,提供驱动环路热管内工质循环的毛细力.其中柱状毛细泵为最早、最传统的构型,技术已经较... 相似文献
4.
5.
6.
7.
文章针对月球探测器设备月昼高效传热和月夜阻断传热需求,设计了一种以八氟环丁烷为工质的开关式高冰点槽道热管,对其常温下传热性能及启动特性开展了地面实验研究。结果表明:热管工作温度35~55℃范围内的最大传热量大于40 W;工作在35~55℃温度范围、传热量为25 W时,蒸发段测点与冷凝段测点温差小于5℃;在相同传热量情况下,工作温度越高,传热温差越小;管体与水平面夹角分别为10°、30°两种情况下,热管均能在90 s内正常启动。该热管已在"嫦娥四号"探测器中得到成功应用。探测器地面热平衡试验和在轨数据表明,高冰点热管在月昼高温工况传热效果良好,月夜低温工况热管工质冻结、可以实现设备保温,确保了探测器相关设备在轨的高性能工作。 相似文献
8.
9.
10.
环路热管在低温真空环境下的控温性能试验研究 总被引:1,自引:0,他引:1
针对某航天遥感器CCD器件在轨全寿命周期±2℃的控温要求,文章设计了一种采用陶瓷毛细芯的控温型环路热管。相比常用的金属毛细芯,陶瓷毛细芯具有更广的工质/壳体相容性、更高的开孔孔隙率、更低的导热系数和更小的孔径。上述优点使陶瓷毛细芯环路热管具有更高的运行效率和可靠性。文章通过低温真空试验验证了这种环路热管模拟空间环境下的启动和控温性能。该环路热管在储液器21.4℃、冷凝器–50.7℃的低温大温差条件下成功启动,在恒定驱动功率80W/70W/60W和交变功率30W/60W加载下,蒸发器九个冷板控温精度分别可以达到±0.4℃和±0.5℃。控温型陶瓷毛细芯环路热管可以满足分布式间歇工作多热源系统的精确控温,具有非常广阔的在轨应用前景。文章结论可为控温型环路热管在轨应用提供参考。 相似文献
11.
介绍了一种新的刚体转动的四元数模型。这些模型可以提高再定向控制的对边界条件的适应能力,在此基础上还介绍了这些模型的一些实际应用。 相似文献
12.
A. A. Davydov 《Cosmic Research》2011,49(4):335-344
A communication satellite (small spacecraft) injected into a geosynchronous orbit is considered. Flywheel engines are used
to control the rotational spacecraft motion. The spacecraft after the emergency situation has passed into a state of uncontrolled
rotation. In this case, no direct telemetric information about parameters of its rotational motion was accessible. As a result,
the problem arose to determine the rotational satellite motion according to the available indirect information: current taken
from the solar panels. Telemetric measurements of solar panel current obtained on the time interval of a few hours were simultaneously
processed by the least squares method integrating the equations of rotational satellite motion. We present the results of
processing 10 intervals of the measurement data allowing one to determine the real rotational spacecraft motion and to estimate
the total angular momentum of flywheel engines. 相似文献
13.
The problem of optimal control over many-revolution spacecraft orbit transfers between circular coplanar orbits of satellites is considered. The spacecraft flight is controlled by a thrust vector of a jet engine with restricted thrust (JERT). The mass expenditure is minimized at a limited time of flight. The optimal control problem is solved based on the maximum principle. The boundary value problem of the maximum principle is solved numerically using the shooting method. A modified computation scheme of the shooting method is suggested (multi-point shooting), as well as a method (correlated with the scheme) of choosing the initial approximation with the use of a solution to the optimization problem in the impulse formulation. The scheme and method allow one to construct many-revolution spacecraft orbit transfers. 相似文献
14.
热变形对天线指向机构的指向精度具有重要影响,但利用传统的设计方法很难实现对指向精度的准确计算,尤其是热变形对指向精度影响的研究工作更是少见。为此建立了机构的三维实体热-结构耦合有限元分析模型,根据有限元分析结果并结合机构的运动链关系,构建了各关键运动副运动误差的计算方法;在此基础上实现了机构指向误差的计算,研究了运动副名义、最大以及最小配合间隙条件下,温度载荷对各关键运动副运动误差和指向精度的影响。研究结果表明,温度载荷对关键运动副的运动误差以及机构的指向精度具有重要影响,随着温度载荷偏离常温数值的增加,指向误差不断增大,名义配合间隙条件下的指向误差最大。 相似文献
15.
16.
为满足航天器微振动环境模拟的需要,开展了多自由度微振动时域波形复现控制方法研究。首先,介绍了基于时域波形复现的多自由度微振动环境模拟控制理论方法。其次,针对六自由度微振动激励系统,应用MATLAB软件建立了基于实测传递函数矩阵的多输入多输出微振动激励仿真系统,针对微振动时域波形复现闭环控制过程进行了算法编程,并给出了仿真的闭环控制流程图。最后,通过算例对多自由度微振动时域波形复现进行了数值仿真,以给定的白噪声为输入,模拟对实际存在的系统非线性、测量误差等影响因素的控制效果。仿真结果验证了多自由度微振动时域波形复现控制方法的可行性及有效性,所得结论可以为研究多自由度微振动时域波形复现控制系统提供参考。 相似文献
17.
18.
10月14日,国际空间大学董事会主席拉姆·哈迪姆访问中国航天科技集团公司,就集团公司承办国际空间大学2007年暑期进修项目的筹备情况与集团公司人力资源部部长陈学钏、副部长白燕强交换了意见。陈学钏部长向哈迪姆通报了集团公司筹备这次活动的工作进展情况。据陈部长介绍,中国 相似文献
19.
The problem of determining an estimation of current spacecraft motion parameters on the stage of its descent is solved on the basis of readings of an optoelectronic navigation system and additional information from the self-contained inertial navigation system at the most general assumptions on the nature of motion of the object and the statistical properties of the noise of the measuring devices. 相似文献