共查询到20条相似文献,搜索用时 696 毫秒
1.
“资源三号”卫星遥感技术 总被引:1,自引:0,他引:1
"资源三号"(ZY-3)卫星是中国自行研制的民用高分辨率光学传输型立体测绘卫星,于2012年1月9日在太原卫星发射中心使用CZ-4B运载火箭发射升空。卫星可提供3.5m分辨率立体影像,2.1m全色/5.8m多光谱平面影像,可用于1∶50 000立体测图及更大比例尺基础地理信息产品的生产和更新。文章重点介绍了ZY-3卫星定位精度高和内方位元素稳定性强等任务特点以及内方位元素高稳定性的立体测绘相机、高速率双圆极化复用数据传输技术、角秒级定姿精度等技术创新点,简要介绍了在轨评价及应用情况,为后续测绘卫星提供参考。 相似文献
2.
卫星测绘是基于各类测绘卫星获取地理信息和提供地理信息服务的重要手段,卫星测绘能力和应用水平是国家对地观测能力的直接反映。文章在分析国内外卫星测绘发展现状、总结"资源三号"卫星测绘技术攻关及应用情况的基础上,立足于实际应用需求,瞄准发展短板和空白,展望了中国测绘卫星后续发展思路与技术难点。 相似文献
3.
4.
5.
“资源三号”卫星在轨几何定标及精度评估 总被引:6,自引:0,他引:6
"资源三号"卫星是中国第一颗民用三线阵立体测图卫星,实现了中国民用高分辨率测绘卫星领域零的突破,对中国测绘事业的发展具有革命性意义,是中国卫星测绘发展史上一座新的里程碑。在轨几何定标是测绘卫星应用的一个重要环节,文章利用武汉大学在河南嵩山地区建设的几何定标场等基础设施实现了"资源三号"卫星的在轨几何定标,并对定标结果进行了试验验证。试验结果表明:基于高精度几何定标场几何定标后,"资源三号"卫星可以获得很好的无地面控制精度以及少量控制下的平面和高程精度,完全可以满足1︰50 000测图精度要求。 相似文献
6.
“资源三号”高分辨率立体测绘卫星三线阵相机设计与验证 总被引:2,自引:0,他引:2
2012年1月9日,中国第一颗民用高分辨率立体测绘卫星——"资源三号"卫星在太原卫星发射中心成功发射,星上装载的三线阵相机可以获取2.1m地面像元分辨率(正视相机)和3.5m地面像元分辨率(前/后视相机)全色影像。文章介绍了三线阵相机的组成及工作原理、关键技术及实现情况、在轨运行和测试情况,给出了在轨测试的初步结果。在轨运行情况表明:相机设计合理,成像品质优异,各项指标满足1∶50 000制图应用的要求,实现了内方位元素的高精度稳定,对卫星定位精度达到国际先进水平发挥了关键作用。 相似文献
7.
分析了中国光学卫星影像的严密成像几何模型,并采用有理函数模型(RFM)拟合严密成像几何模型,分别对"资源二号"两景影像(平原与山区)和"遥感二号"一景影像进行了几何纠正试验。试验中,参考相应地区1∶10 000数字正射影像(DOM)选取一定数量的控制点用于精化有理函数模型参数,结合相应地区1∶10 000数字高程模型(DEM)对影像进行正射纠正,纠正精度反映了RFM拟合严密成像几何模型的正确性,但同时也反应了中国光学卫星与法国、美国光学卫星在内检校工作上的差距。 相似文献
8.
9.
10.
11.
介绍了一种新的刚体转动的四元数模型。这些模型可以提高再定向控制的对边界条件的适应能力,在此基础上还介绍了这些模型的一些实际应用。 相似文献
12.
为满足航天器微振动环境模拟的需要,开展了多自由度微振动时域波形复现控制方法研究。首先,介绍了基于时域波形复现的多自由度微振动环境模拟控制理论方法。其次,针对六自由度微振动激励系统,应用MATLAB软件建立了基于实测传递函数矩阵的多输入多输出微振动激励仿真系统,针对微振动时域波形复现闭环控制过程进行了算法编程,并给出了仿真的闭环控制流程图。最后,通过算例对多自由度微振动时域波形复现进行了数值仿真,以给定的白噪声为输入,模拟对实际存在的系统非线性、测量误差等影响因素的控制效果。仿真结果验证了多自由度微振动时域波形复现控制方法的可行性及有效性,所得结论可以为研究多自由度微振动时域波形复现控制系统提供参考。 相似文献
13.
A. A. Davydov 《Cosmic Research》2011,49(4):335-344
A communication satellite (small spacecraft) injected into a geosynchronous orbit is considered. Flywheel engines are used
to control the rotational spacecraft motion. The spacecraft after the emergency situation has passed into a state of uncontrolled
rotation. In this case, no direct telemetric information about parameters of its rotational motion was accessible. As a result,
the problem arose to determine the rotational satellite motion according to the available indirect information: current taken
from the solar panels. Telemetric measurements of solar panel current obtained on the time interval of a few hours were simultaneously
processed by the least squares method integrating the equations of rotational satellite motion. We present the results of
processing 10 intervals of the measurement data allowing one to determine the real rotational spacecraft motion and to estimate
the total angular momentum of flywheel engines. 相似文献
14.
The problem of determining an estimation of current spacecraft motion parameters on the stage of its descent is solved on the basis of readings of an optoelectronic navigation system and additional information from the self-contained inertial navigation system at the most general assumptions on the nature of motion of the object and the statistical properties of the noise of the measuring devices. 相似文献
15.
The problem of optimal control over many-revolution spacecraft orbit transfers between circular coplanar orbits of satellites is considered. The spacecraft flight is controlled by a thrust vector of a jet engine with restricted thrust (JERT). The mass expenditure is minimized at a limited time of flight. The optimal control problem is solved based on the maximum principle. The boundary value problem of the maximum principle is solved numerically using the shooting method. A modified computation scheme of the shooting method is suggested (multi-point shooting), as well as a method (correlated with the scheme) of choosing the initial approximation with the use of a solution to the optimization problem in the impulse formulation. The scheme and method allow one to construct many-revolution spacecraft orbit transfers. 相似文献
16.
热变形对天线指向机构的指向精度具有重要影响,但利用传统的设计方法很难实现对指向精度的准确计算,尤其是热变形对指向精度影响的研究工作更是少见。为此建立了机构的三维实体热-结构耦合有限元分析模型,根据有限元分析结果并结合机构的运动链关系,构建了各关键运动副运动误差的计算方法;在此基础上实现了机构指向误差的计算,研究了运动副名义、最大以及最小配合间隙条件下,温度载荷对各关键运动副运动误差和指向精度的影响。研究结果表明,温度载荷对关键运动副的运动误差以及机构的指向精度具有重要影响,随着温度载荷偏离常温数值的增加,指向误差不断增大,名义配合间隙条件下的指向误差最大。 相似文献
17.
18.
19.