共查询到20条相似文献,搜索用时 515 毫秒
1.
软件定义航天器系统架构设计 总被引:3,自引:0,他引:3
《航天器工程》2021,30(5)
软件定义技术的高速发展有望引发航天产业新一轮的技术革新。文章分析了未来航天器发展的总体趋势和软件定义航天器的发展现状;针对未来航天器灵活、自主和快速的发展需求,提出了一种软件定义航天器系统架构,其具有设计分层化、接口规范化、硬件通用化、功能软件化和资源虚拟化等技术特征。相比以往的航天器系统架构,它将软件定义扩展至整个航天器,并充分考虑了航天器的固有特征。文章分析了该架构对未来航天器发展需求的满足情况,梳理了开放架构与规范、器载操作系统、器载超算平台和安全机制4项关键技术,并提出进一步细化系统架构、形成标准规范的发展建议。 相似文献
2.
3.
4.
5.
镁合金在航天器上的应用分析与实践 总被引:1,自引:1,他引:0
镁合金具有比强度、比刚度高,阻尼性好,电磁屏蔽能力、抗辐照能力强等优点,是特别适合航天器选用的轻质金属材料。文章针对航天器结构轻量化的发展需求,结合镁合金在航天器中的不同应用情况,分析了镁合金存在的耐腐蚀性、焊接和加工成型等工艺问题,给出了具体工艺方法和措施建议。 相似文献
6.
7.
8.
我国空间环境试验的现状与发展建议 总被引:1,自引:1,他引:0
文章简要回顾了我国空间环境试验的发展历史与现状,并根据我国空间技术发展的需求,从大型复杂航天器环境试验、长寿命航天器环境适应性评估验证与防护、空间环境及其效应在轨飞行实验、月球与深空环境模拟与试验等方面对我国空间环境试验技术发展提出了一些建议。 相似文献
9.
航天器整体壁板结构制造技术 总被引:1,自引:0,他引:1
整体壁板结构具有明显的特点与优点,是航天器结构的发展趋势,是载人航天器的主要结构形式。通过国内外大量文献的分析,结合一些实践经验,重点从整体壁板的材料、结构形式,以及整体壁板结构的加工、成形、焊接等制造工艺进行了论述。并结合我国空间飞行器发展需求,给出航天器整体壁板结构制造工艺技术的发展思路和建议。 相似文献
10.
《航天器工程》2016,(6):69-74
随着独立航天器向可重构、多功能方向的快速发展,以及组合式、组网式多航天器信息交互需求的增加,单一传统遥控体制已无法满足要求。为此,文章采用多种遥控体制组合的思想,设计了3种适应上述发展需求的遥控组合方案,即分包遥控-脉冲编码调制(PCM)遥控组合、PCM遥控-高级在轨系统(AOS)组合和分包遥控-PCM遥控-AOS混合组合,并从传输数据量、传输数据类型、占用信道情况、与现有遥控接收设备兼容性等方面分析了其各自特点及应用场合。文章提出的3种方案可有效解决遥控功能需求问题,并已在我国某大型组合式航天器中成功应用,可为后续航天器遥控体制设计提供参考。 相似文献
11.
介绍了一种新的刚体转动的四元数模型。这些模型可以提高再定向控制的对边界条件的适应能力,在此基础上还介绍了这些模型的一些实际应用。 相似文献
12.
A. A. Davydov 《Cosmic Research》2011,49(4):335-344
A communication satellite (small spacecraft) injected into a geosynchronous orbit is considered. Flywheel engines are used
to control the rotational spacecraft motion. The spacecraft after the emergency situation has passed into a state of uncontrolled
rotation. In this case, no direct telemetric information about parameters of its rotational motion was accessible. As a result,
the problem arose to determine the rotational satellite motion according to the available indirect information: current taken
from the solar panels. Telemetric measurements of solar panel current obtained on the time interval of a few hours were simultaneously
processed by the least squares method integrating the equations of rotational satellite motion. We present the results of
processing 10 intervals of the measurement data allowing one to determine the real rotational spacecraft motion and to estimate
the total angular momentum of flywheel engines. 相似文献
13.
为满足航天器微振动环境模拟的需要,开展了多自由度微振动时域波形复现控制方法研究。首先,介绍了基于时域波形复现的多自由度微振动环境模拟控制理论方法。其次,针对六自由度微振动激励系统,应用MATLAB软件建立了基于实测传递函数矩阵的多输入多输出微振动激励仿真系统,针对微振动时域波形复现闭环控制过程进行了算法编程,并给出了仿真的闭环控制流程图。最后,通过算例对多自由度微振动时域波形复现进行了数值仿真,以给定的白噪声为输入,模拟对实际存在的系统非线性、测量误差等影响因素的控制效果。仿真结果验证了多自由度微振动时域波形复现控制方法的可行性及有效性,所得结论可以为研究多自由度微振动时域波形复现控制系统提供参考。 相似文献
14.
The problem of determining an estimation of current spacecraft motion parameters on the stage of its descent is solved on the basis of readings of an optoelectronic navigation system and additional information from the self-contained inertial navigation system at the most general assumptions on the nature of motion of the object and the statistical properties of the noise of the measuring devices. 相似文献
15.
The problem of optimal control over many-revolution spacecraft orbit transfers between circular coplanar orbits of satellites is considered. The spacecraft flight is controlled by a thrust vector of a jet engine with restricted thrust (JERT). The mass expenditure is minimized at a limited time of flight. The optimal control problem is solved based on the maximum principle. The boundary value problem of the maximum principle is solved numerically using the shooting method. A modified computation scheme of the shooting method is suggested (multi-point shooting), as well as a method (correlated with the scheme) of choosing the initial approximation with the use of a solution to the optimization problem in the impulse formulation. The scheme and method allow one to construct many-revolution spacecraft orbit transfers. 相似文献
16.
热变形对天线指向机构的指向精度具有重要影响,但利用传统的设计方法很难实现对指向精度的准确计算,尤其是热变形对指向精度影响的研究工作更是少见。为此建立了机构的三维实体热-结构耦合有限元分析模型,根据有限元分析结果并结合机构的运动链关系,构建了各关键运动副运动误差的计算方法;在此基础上实现了机构指向误差的计算,研究了运动副名义、最大以及最小配合间隙条件下,温度载荷对各关键运动副运动误差和指向精度的影响。研究结果表明,温度载荷对关键运动副的运动误差以及机构的指向精度具有重要影响,随着温度载荷偏离常温数值的增加,指向误差不断增大,名义配合间隙条件下的指向误差最大。 相似文献
17.
18.
19.