机械故障对航班飞行的影响

旅客临上飞机或上了飞机后飞机出现故障不得不下飞机等待,有时候飞机起飞后才被告知飞机出现故障不得小返航或就近降落,碰到这些情况,旅客除了要忍受航班延误带来的不便,心里还会犯嘀咕,对安全担心,这些都是可以理解的。旅客关心的是故障修复到底要多长时间,再次上飞机更关心的是飞机故障彻底排除了吗?这里简要介绍飞机的日常维护和故障后维修的一般程序。     

大修飞机故障分析与设计改进

大修飞机出现的故障多种多样,有些故障是普遍存在的问题,而且这些故障是在正常使用过程中出现的,这类故障通常是由于设计不合理造成的。通过对大修飞机出现的故障的原因进行严密的分析,从而发现设计、制造环节中的不合理之处,并进行改进,是不断提高飞机性能及质量的重要手段之一。通过案例,介绍了如何从大修飞机出现的故障对飞机设计进行改进。     

飞机电线老化问题及其对策

飞机电线因老化产生的故障在一架普通的飞机中出现几百处之多,其中有些故障可能是致命的。本文介绍了飞机电线老化产生的故障,以及排除故障的各种方法。     

飞机供电系统的故障预测研究

引入了飞机供电系统故障预测的概念和功能,设计了飞机供电系统故障预测的整体框架,研究了飞机供电系统故障预测的推理机,并提出了适当的验证方法,为该项技术的工程应用提供了理论支持。     

提高飞机舱盖玻璃的抗故障能力是满足视情维修目的的根本

介绍了国产各型飞机舱盖玻璃所用的材料并进行了性能比较;介绍了飞机舱盖玻璃的主要故障模式并分别给予了故障原因分析;提出了提高飞机舱盖玻璃的抗故障能力的方法。     

浅析SR20飞机电源系统及其故障

对SR20飞机电源系统进行了简单介绍,以飞机运行中出现的电源系统故障信息为例,对设备故障现象和排故措施进行分析,总结了SR20飞机电源系统的薄弱环节和容易出现故障的功能件,寻求迅速找到故障原因的方法和更好的维护方式,以降低设备出现故障的频率。     

飞机电缆典型故障分析

以飞机电缆发生的典型故障为例,详细分析了飞机电缆产生故障的主要原因,并给出了相应的解决措施,为飞机电缆的修理及排故工作提供指导。     

多操纵面飞翼构型飞机舵面故障在线诊断方法

舵面故障会影响飞机的操纵性,为实现飞机的控制重构需在线诊断出舵面的故障信息.针对多操纵面飞翼构型飞机,提出了一种在线诊断其舵面故障的方法.飞翼构型飞机舵面故障在线诊断需辨识的操纵导数个数较多,直接使用最小二乘法难以精确辨识得到各操纵导数.基于限定记忆最小二乘法,采用分组辨识法对飞机的操纵导数进行辨识,减少了每次辨识操纵...     

某型飞机冲压口喷油故障分析

冲压口喷油不仅延误飞机出动时间,还可能失火烧毁飞机.针对飞机压力加油出现的冲压口喷油故障,经过原因分析、故障定位和排故过程,提出了预防措施和改进建议,对排故中遇到的问题进行了讨论,可为类似故障的排除提供参考.     

基础教练机起落架收放动作筒异常开锁故障分析

起落架是支撑整架飞机的装置,如果地面异常收起,飞机将受到损伤,对飞机及飞行员的安全十分重要.本文将基础教练机的一起起落架收放动作筒异常开锁作为一个典型案例进行了深入分析,说明了故障发生时机及故障特征,提出了预防该类故障的措施.     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

ν-gap度量及其在飞行控制律评估中的应用

 传统控制律评估方法主要用于单输入单输出（SISO）系统，且对模型参数摄动考虑不够全面,针对这些不足，研究了ν-gap度量方法。在介绍系统广义稳定裕度相关概念的基础上，给出了ν-gap度量的定义、特点和性质以及近似摄动模型的计算，提出ν-gap度量评估控制律的步骤。实例结果表明，该方法不仅克服了上述传统评估方法的缺陷，而且还有根据所求的各摄动影响情况忽略影响小的元素，以减少计算量及可以找到最坏情况下的参数摄动组合等优点。     

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Integrated Entry Guidance for Reusable Launch Vehicle

A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method.     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。