考虑间隙内流的二元机翼跨声速气动力分析

基于Navior-Stokes (N-S)方程和Spalart-Allmaras湍流模型,建立了含间隙二元机翼的跨声速绕流场计算模型和间隙内流计算模型.通过FLUENT数值仿真,分析了二元机翼的激波压力分布和马赫数分布,并与风洞试验 结果进行了对比验证.数值结果表明,连通波后高压区和波前低压区的间隙内流会提高机翼绕流场中激波前后的速度梯度和压力梯度.局部间隙内流会对机翼结构带来“向外吸”和“向前顶”的气动载荷作用.     

陶瓷隔热瓦轻量化制备

针对航天器减重的需求,开展了陶瓷隔热瓦轻量化制备研究。一方面不改变隔热瓦的组分和基本工艺参数,仅改变致密化程度得到较低密度(0.25～0.30 g/cm~3)的隔热瓦,研究其微观结构、热导率、力学性能和高温隔热效果随密度的变化规律;另一方面,改变隔热瓦的烧结温度或引入短纤维,分析参数改变对隔热瓦热导率和力学性能的影响。结果表明:密度减小会降低隔热瓦的室温热导率,同时力学性能及高温隔热效果也会下降;提高烧结温度是提高低密度隔热瓦力学性能的有效途径,不同长、短纤维比例对热导率和力学性能无明显影响。     

Survivable communication concept via multiple low Earth-orbitingsatellites

An overview of a reliable cross-link communication system using multiple low-Earth-orbit satellites is presented, covering the overall network concept, data packet routing, communication techniques including antenna subsystems, communication parameter tradeoffs, signal processing, and the overall radio design concept definition. The critical issue addressed is the maximum cross-link distance coverage obtained under stressed conditions by utilizing an optimal coding technique for a given prime power of the satellite     

高辐射涂层对刚性隔热瓦性能的影响

文摘由二硅化钼和玻璃料等组成制备了一种刚性隔热瓦表面使用的高辐射涂层,研究了高辐射涂层对刚性隔热瓦结构、力学性能、防水特性、辐射特性、辐射加热试验、风洞试验和深空碎片高速撞击试验的影响规律。结果表明:刚性隔热瓦表面高辐射涂层为致密梯度结构,表面平整,辐射系数大于0.85,防水效果好;高辐射涂层提高了材料的弯曲强度和肖氏硬度;厚度方向的拉伸强度因为涂层和基体的不匹配降低了近50%;石英灯辐射加热试验中,致密的高辐射涂层提高了表面黑度,吸收更多热量使表面温度升高,背面温度上升快。风洞试验中,高辐射涂层将气动加热辐射掉一部分,降低了表面温度从而使材料具有更低的背面温度;含高辐射涂层的刚性隔热瓦能经受典型空间碎片冲击,未产生致命性的破坏。     

无线传感器网络路由协议研究与分析

集成了传感器、嵌入式技术、分布式信息处理技术和无线通信技术而形成的无线传感器网络(wireless sensor network,简称WSN)是一种全新的信息获取和处理技术。但由于无线传感器网络的特点,使其路由协议即不同于传统的网络,又有别于ad hoc网络。对几种典型无线传感器网络路由协议进行了详细分析与比较,并针对LEACH算法存在的问题提出了一种改进方案。     

飞机维修路径研究热点与前沿——基于CiteSpace的可视化分析

近年来,随着民航运输业的飞速发展,飞机维修路径规划研究越来越受到重视。为了探究飞机维修路径规划问题的研究现状、研究热点以及前沿趋势,以中国知网（CNKI）和Web of Science 核心数据库2000 年1 月—2022 年12 月收录的国内外飞机维修路径规划研究的相关文献作为分析数据,将CiteSpace V 软件作为辅助研究工具,分析飞机维修路径规划研究领域的研究学者和研究机构以及合作关系,结合知识图谱与文献内容总结该领域的研究热点与研究前沿。考虑国内的飞机维修路径规划研究情况,针对我国在该领域的研究趋势以及重点研究内容提出研究建议,为今后飞机维修路径规划研究提供参考。     

Reinforcement learning based dynamic distributed routing scheme for mega LEO satellite networks

Recently, mega Low Earth Orbit (LEO) Satellite Network (LSN) systems have gained more and more attention due to low latency, broadband communications and global coverage for ground users. One of the primary challenges for LSN systems with inter-satellite links is the routing strategy calculation and maintenance, due to LSN constellation scale and dynamic network topology feature. In order to seek an efficient routing strategy, a Q-learning-based dynamic distributed Routing scheme for LSNs (QRLSN) is proposed in this paper. To achieve low end-to-end delay and low network traffic overhead load in LSNs, QRLSN adopts a multi-objective optimization method to find the optimal next hop for forwarding data packets. Experimental results demonstrate that the proposed scheme can effectively discover the initial routing strategy and provide long-term Quality of Service (QoS) optimization during the routing maintenance process. In addition, comparison results demonstrate that QRLSN is superior to the virtual-topology-based shortest path routing algorithm.     

混合SDN的多目标路由优化算法

为充分利用SDN(Software Defined Network,软件定义网络)节点的优势来优化网络性能,混合SDN的流量工程成为当前的研究热点,而路由优化是实现流量工程目标的重要策略之一.但是,当前混合SDN的流量工程中未考虑网络整体的负载均衡以及SDN节点的处理能力.针对上述问题,提出了一种多目标路由优化算法——MCS(Minimum Cost Sum,最小化代价和),综合考虑整个网络的传输延迟与链路利用率,同时保证SDN节点的处理能力满足实际约束,最终实现全网综合性能的最优化.实验结果表明,当网络整体负载较轻,MCS与现有的SOTE(SDN/OSPF Traffic Engineering,软件定义网络/开放最短路径优先流量工程)算法性能相近;而当网络负载加重时,MCS相比于SOTE,可将网络负载降低约9％,因此,MCS算法具有更高的优化能力.     

涂层制备过程中刚性隔热瓦的变形控制

针对刚性隔热瓦涂层制备过程中高温烧结热处理所导致的变形问题,在对其变形机制分析的基础上,探索了变形控制方法。研究结果表明,刚性隔热瓦在涂层制备过程中的变形来源于涂层玻璃相降温过程中收缩所导致的对于基体材料的压应力。与常规方法相比,仅将涂覆涂层面置于高温环境中烧结热处理,或者采用厚度较大的基体材料成型涂层后再进行二次加工减薄至最终所需厚度,均可明显降低变形量,变形量随基体材料厚度的增加而减小。当这两种方法并用时可进一步降低变形量。     

VXI or PXI test system improvement using DSP

The results of a study into the use of distributed digital signal processing (DSP) at the instrument level in a VXI and PXI based test system and the effects on test time. One of the limiting factors in testing mixed signal or analog devices using standard bus based instruments is the transfer speed from the instrument to the controlling computer of large amounts of waveform data. This is important as these types of tests use non-deterministic, quantized signals that must be mathematically processed to extract test information. This processing can either be done at the instrument or at the central controller. If the processing is done at the instrument then only the results are transferred to the controller. If the controller does the processing then the raw data must be transferred to and from the instrument. Using two instruments, one in VXI and one in PXI, this paper measures the effects of typical tests contesting the measurements as done in the central processor as opposed to a distributed DSP processor in each instrument For each acquisition instrument, tests were implemented by capturing the data and moving it to the controlling computer where it was processed to extract test results, or by using the instruments on-board DSP so only the final test results were set to the controlling computer. The study results show that a significant improvement in test time can be made by selecting "smart" instruments for the test system when using PXI or VXI based instruments.     

Routing in networks of intersatellite links

How to characterize and implement point-to-point (i.e., unicast) routing algorithms is discussed. The characteristics of routing algorithms are first described as well as the specificities of routing in constellations of nongeostationary (NGO) satellites equipped with intersatellite links (ISLs). Then, some of the candidate algorithms displaying the characteristics identified before are simulated and evaluated for different constellations. From the simulation results, it appears that (1) from a routing perspective, constellations are not similar to terrestrial networks, and (2) the constellation geometry has a significant impact on the routing performance.     

Research of multi-path routing based on network coding in space information networks

A multi-path routing algorithm based on network coding is proposed for combating long propagation delay and high bit error rate of space information networks. On the basis of traditional multi-path routing, the algorithm uses a random linear network coding strategy to code data pack- ets. Code number is determined by the next hop link status and the number of current received packets sent by the upstream node together. The algorithm improves retransmission and cache mechanisms through using redundancy caused by network coding. Meanwhile, the algorithm also adopts the flow distribution strategy based on time delay to balance network load. Simulation results show that the proposed routing algorithm can effectively improve packet delivery rate, reduce packet delay, and enhance network performance.     

管路系统计算机辅助设计方法研究

为进行计算机辅助管路系统敷设,本文归纳出9条管路CAD规则,探讨了3种管路敷设方法。为满足管路设计规则,根据管路系统的复杂性和计算机辅助敷设的特点,本文提出了先敷设粗管再分区敷设最后解决跨区域管路的WRS法。它按照先重后轻、先短后长、先难后易的敷管原则,体现了局部最优从而达到全局最佳的原理。文中着重介绍了该方法的思路,并结合在电子模型样机上的敷管实例及过程,分析了该方法的特点。      

Aperture Sampling Techniques for Precision Direction Finding

The resolution and tracking of radar targets which are close to. gether is a classical problem which is receiving increased attention. Improving the angular resolution by sampling the received wave front along the aperture and then applying modern "high resolution" spectrum estimation techniques (e. g., maximum likelihood and maximum entropy processing) to the spatial sample data is discussed. Experimental results are presented for the application ion of these techniques to field data from a L- band line array.     

Role of processing geometry in SAR raw data focusing

Synthetic aperture radar (SAR) systems require that a focusing operation be performed on the received backscattered echoes (raw data) to generate high-resolution microwave images. Either due to platform attitude instabilities, or to Earth rotation effects, the SAR raw data may be acquired in "squinted" geometries, i.e., with the radar beam directed with an offset angle (squint angle) from the broadside direction. This research investigates the impact of the focusing operation carried out on squinted raw data acquisitions performed by SAR sensors operating in the stripmap mode. To this end the 2D frequency SAR processing approach is generalized with respect to conical, i.e., nonorthogonal, reference systems. This allows analysis of the geometric, spectral, and phase aberrations introduced in the images by the chosen processing geometry with respect to the acquisition, and identification of the focusing procedure that minimizes these aberrations. The whole theory is validated by experimental results carried out on simulated data. Moreover, the extension of this analysis to the interferometric case where these aberrations may have a significant role is also investigated     

IP网络设备典型故障分析及其对策

针对IP网络设备在使用过程中产生的广播风暴、传输数据丢包、MP-group(Multilink-group,复用链路组)接口链路层运行PPP(Point to Point Protocol,点对点协议)异常等问题,结合华为S9300交换机设备、NE40E路由器设备的工作原理,对策略路由机理、STP(Spanning Tree Protocol生成树协议)、广播数据帧复制过程进行了研究和分析。并通过分析问题产生的机理,发现了目前网络数据配置存在的不足,提出了在核心层交换机上配置流过滤策略等应对措施和快速处理故障的方法,对系统进行了完善与改进,并优化了相关领域的应用,为维护人员在任务中迅速、合理地实施应急处置提供了参考。     

Overview of multiple satellite communication networks

Recently interest in packet communications has stimulated an interest in constellations of low altitude satellites. Such a configuration would have less propagation delay and be cheaper to launch than satellites at higher or geosynchronous altitude. However, many more satellites are necessary at low altitude to achieve reasonable coverage of the earth and insure availability of the resource. Further, the geometry of such a constellation would be dynamic with communication links of short duration as the satellites speed past each other or a ground site. The most difficult design issue in these systems is a stable method of routing messages that will sustain a reasonable level of traffic. This paper explores the problems of routing and switching messages through a constellation of low altitude satellites and examines some of the related demands on technology. The dynamic nature of crosslinks, uplinks, and downlinks requires a very agile antenna system, and the volume of information for routing of traffic is overwhelming. Use of some type of facetted phased array antenna is advocated to solve the former problem, but the latter problem is more subtle. Since the volume of ephemeris and constellation data as well as the rate of update is unmanageable, schemes relying on some form of broadcast or random access may be considered. It is concluded that none of the known or examined approaches to routing and switching is completely satisfactory     

The FAST Satellite Fields Instrument

We describe the electric field sensors and electric and magnetic field signal processing on the FAST (Fast Auroral SnapshoT) satellite. The FAST satellite was designed to make high time resolution observations of particles and electromagnetic fields in the auroral zone to study small-scale plasma interactions in the auroral acceleration region. The DC and AC electric fields are measured with three-axis dipole antennas with 56 m, 8 m, and 5 m baselines. A three-axis flux-gate magnetometer measures the DC magnetic field and a three-axis search coil measures the AC magnetic field. A central signal processing system receives all signals from the electric and magnetic field sensors. Spectral coverage is from DC to 4 MHz. There are several types of processed data. Survey data are continuous over the auroral zone and have full-orbit coverage for fluxgate magnetometer data. Burst data include a few minutes of a selected region of the auroral zone at the highest time resolution. A subset of the burst data, high speed burst memory data, are waveform data at 2×10⁶ sample s^–1. Electric field and magnetic field data are primarily waveforms and power spectral density as a function of frequency and time. There are also various types of focused data processing, including cross-spectral analysis, fine-frequency plasma wave tracking, high-frequency polarity measurement, and wave-particle correlations.     

一种全自动的检测方法用于SAR-ATI的GMTI

针对星载SAR-ATI处理的中间结果,提出了一种称为"两步-类高斯拟合"完全自适应的检测方法。该方法可以完全自动地实现杂波和噪声中的运动目标检测,避免了传统方法作联合高斯数据的假定,无须推导SAR-ATI干涉图的理论概率密度函数。此外,该方法还可以大大降低系统的虚警概率并用仿真研究了最小可检测速度。