Mapping lunar surface chemistry: New prospects with the Chandrayaan-2 Large Area Soft X-ray Spectrometer (CLASS)

Surface chemistry of airless bodies in the solar system can be derived from remote X-ray spectral measurements from an orbiting spacecraft. X-rays from planetary surfaces are excited primarily by solar X-rays. Several experiments in the past have used this technique of X-ray fluorescence for deriving abundances of the major rock forming elements. The Chandrayaan-2 orbiter carries an X-ray fluorescence experiment named CLASS that is designed based on results from its predecessor C1XS flown on Chandrayaan-1. We discuss the new aspects of lunar science that can be potentially achieved with CLASS.     

U.S. planetary protection program: Implementation highlights

The implementation of planetary protection in the United States space program has reflected the trend in policy from an absolute to a probabilistic prohibition of the contamination of the celestial bodies of the solar system. The early emphasis on spacecraft sterilization (e.g. Ranger) was replaced by the imposition of contamination control procedures on later missions such as Pioneer, Viking, and Voyager. Similarly, analytical and laboratory techniques were developed to demonstrate compliance with probabilistic requirements. Microbial burden reduction methods that are not hazardous for spacecraft reliability supplanted the abstract concept of sterilization. The United States implementation of planetary protection has been completely successful. In an exploration program that has included Mercury, Venus, Mars, the Jovian system, and the Saturnian system, there have been no accidental impacts or detection of false positives (terrestrial microbes). Further, the contamination control and microbial burden procedures have proved beneficial to spacecraft systems and on-board science instruments. We review in this paper the implementation of planetary protection procedures by the Pioneer (10 and 11), Viking and Voyager projects.     

航天器大尺度部件折叠展开原理分析及应用

围绕航天器向大尺度、远距离发展所涉及的大尺度部件在轨展开技术中新工艺、新材料、新结构等，对现有航天器大尺度部件的折展机构进行了统计与分析，系统梳理了在轨航天器折展机构的技术参数、结构与组成等。介绍了折纸艺术、自回弹材料与记忆合金等新工艺、新材料在航天器太阳帆板、天线等大尺度部件上的应用。重点分析并梳理了新型结构的特性及其工作原理，包括：充气展开式、单轴旋转式、径向扩展式、单元重构式、延长伸展式等。最后，结合即将开展的载人登月与月球基地建设、太阳系探测等深空探测任务，对在轨航天器大尺度部件的折展结构与机构的发展趋势进行了展望。     

“新视野号”探测冥王星及柯伊伯带综述

迄今为止飞得最快的航天器、人类发射的第一个冥王星探测器——"新视野号",经过约9年的行星际旅行,于2015年1月15日抵达距地球约47亿千米的冥王星附近,开始探测冥王星、冥卫、以及它们所处的柯伊柏带其他天体。柯伊柏带是1992年才发现的太阳系新大陆,虽然冥王星已被重新定义为矮行星,却从一颗颇具争议的行星成为数千颗冰冻小天体的"领头羊"。本文介绍了"新视野号"的科学目标和有效载荷,分析了"新视野号"采用的探测器长期休眠、木星借力、太空核能等关键技术,探讨了冥王星和柯伊柏带探测的意义。作为太阳系的冷库,柯伊伯带天体保留着太阳系形成时的原始状态,对它的探测,有助于揭示太阳系行星形成时的关键环节。"新视野号"也可能发现新的太阳系行星,其成果将有助于我们更深入地认识太阳系。     

Overview of current capabilities and research and technology developments for planetary protection

The pace of scientific exploration of our solar system provides ever-increasing insights into potentially habitable environments, and associated concerns for their contamination by Earth organisms. Biological and organic-chemical contamination has been extensively considered by the COSPAR Panel on Planetary Protection (PPP) and has resulted in the internationally recognized regulations to which spacefaring nations adhere, and which have been in place for 40 years. The only successful Mars lander missions with system-level “sterilization” were the Viking landers in the 1970s. Since then different cleanliness requirements have been applied to spacecraft based on their destination, mission type, and scientific objectives. The Planetary Protection Subcommittee of the NASA Advisory Council has noted that a strategic Research & Technology Development (R&TD) roadmap would be very beneficial to encourage the timely availability of effective tools and methodologies to implement planetary protection requirements. New research avenues in planetary protection for ambitious future exploration missions can best be served by developing an over-arching program that integrates capability-driven developments with mission-driven implementation efforts. This paper analyzes the current status concerning microbial reduction and cleaning methods, recontamination control and bio-barriers, operational analysis methods, and addresses concepts for human exploration. Crosscutting research and support activities are discussed and a rationale for a Strategic Planetary Protection R&TD Roadmap is outlined. Such a roadmap for planetary protection provides a forum for strategic planning and will help to enable the next phases of solar system exploration.     

太阳帆航天器编队维持和重构的方法研究

针对高面质比航天器可以利用太阳光压进行轨道控制的特点,本文提出一种太阳帆航天器编队构型维持和重构的方法.该方法通过控制主从航天器太阳帆姿态角和反射系数,调整主从航天器之间的光压差,产生抵消编队成员间相对运动受到摄动差或进行轨道机动时所需的连续小推力,从而实现编队构型的维持和重构.仿真结果表明,在主航天器太阳帆的姿态角和反射系数相对固定的条件下,对于太阳同步轨道上的高面质比太阳帆航天器编队,使用滑模控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生推力抵消摄动力影响,达到长期维持太阳帆航天器编队构型的目的;通过开环控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生连续小推力,在较长时间周期内实现编队重构.     

太阳质量损失对行星轨道的影响

本文利用Ｇｙｌｄｅｎ－Ｍｅｓｈｃｈｅｒｓｋｉｉ方程和Ｅｄｄｉｎｇｔｏｎ－Ｊｅａｎｓ定律，讨论太阳质量损失对行星轨道的影响，结果表明由于太阳质量损失会产生轨道半长径α的一阶周期项和二阶混合项；近日点角距ω的一阶周期项、二阶长期项和混合项，行星轨道半长径的长期变化会影响太阳系的稳定性。     

The search for extra-solar planetary systems.

I review the observational evidence for planetary systems around nearby stars and, using our own solar system as a guide, assess the stringent requirements that new searches need to meet in order to unambiguously establish the presence of another planetary system. Basically, these requirements are: 1 milliarcsecond or better positional accuracy for astrometric techniques, 9 orders of magnitude or better star to planet luminosity ratio discrimination at 0.5 to 1" separation in the optical for direct imaging techniques, 10 meters sec-1 or better radial velocity accuracy for reflex motion techniques and +/-1% or better brightness fluctuation accuracy for planet/star occultation measurements. The astrometric accuracy is in reach of HST, direct imaging will require much larger telescopes and/or a 50 times smoother mirror than HST while the reflex motion and occultation techniques best performed on the ground are just becoming viable and promise exciting new discoveries. On the other band, new indirect evidence on the existence of other planetary systems also comes from the observation of large dusty disks around nearby main sequence stars not too dissimilar from our sun. In one particular case, that of Beta Pictoris, a flattened disk seen nearly edge-on has been imaged in the optical and near IR down to almost 70 AU of the star. It probably represents a young planetary system in its clearing out phase as planetesimals collide, erode and are swept out of the inner system by radiation pressure. The hypothesized Kuiper belt around our solar system may be the analogous structure in a later evolutionary stage. Features of this type have been detected in the far IR and sub-millimeter wavelength regions around 50-100 nearby main sequence and pre-main sequence stars. I discuss a battery of new accurate observations planned in the near future of these objects some of which may actually harbour planets or planetesimals that will certainly dramatically improve our knowledge of planetary system formation processes and our peculiar position in this scheme.     

Accurate determination of the successive moments of the sun: a new window open on the sun''s interior

Despite its great importance for solar physics, mainly in the fields of solar fundamental astrometry, helioseismology, planetary motions and relativistic effects, the successive zonal harmonics of the Sun still remain elusive and subject to some controversy. Direct observations from the ground suffer from atmospheric effects and are not of enough accuracy. Up to now, space flights (SOHO) or balloon missions give consistent data but lead to spurious results due to the noise. As far as indirect observations are concerned, the more precise determination of the successive moments (mainly J₂, J₄ and even J₆), will be provided unambiguously by the study of the orbit of a spacecraft flying close to the Sun or around Mercury. This has been scheduled, but not yet achieved. In this paper we will first emphasize why it is important to know the successive zonal harmonics of the Sun with a high accuracy. We will show how their precise knowledge permits to obtain informations on the Sun's interior, mainly the shear's regions (tacholine or leptocline). Then we will give an up-to-date review of both theories (including the heliosismology approach) and data. We will explain some of the difficulties, mainly due to the differential rotation and we will give an insight of what the PICARD's mission will bring in that field. Then we will propose a novel concept for a Sun's mission, which would lead to the most accurate determination of the successive solar moments (that could be part of another project), and thus opening a new window on the Sun's interior.     

Robotic Instrument for Grinding Rocks Into Thin Sections (GRITS)

We have developed a rock grinding and polishing mechanism for in situ planetary exploration based on abrasive disks, called Grinding Rocks Into Thin Sections (GRITS). Performance characteristics and design considerations of GRITS are presented. GRITS was developed as part of a broader effort to develop an in situ automated rock thin section (ISARTS) instrument. The objective of IS-ARTS was to develop an instrument capable of producing petrographic rock thin sections on a planetary science spacecraft. GRITS may also be useful to other planetary science missions with in situ instruments in which rock surface preparation are necessary.     

The magnetic fields of Mercury,Venus and Mars

Just as clearly as Mariner 10 established that Mercury has an intrinsic magnetic field, the Pioneer Venus orbiter has established that Venus has no significant intrinsic field. This is perhaps the opposite of what might be expected. Mercury, a small planet might be expected to cool rapidly and its internal dynamo to cease, while Venus, which is almost as large as the Earth, should not have lost much heat. On the contrary the source of energy of the Mercury dynamo appears to be extant whereas that of Venus appears to be extinct.The existence of a Martian magnetic field is controversial. No unambiguous signature of a Martian magnetic field has been reported. If the field on the nightside of Mars is of planetary rather than solar origin the Russian Mars spacecraft observations indicate the Martian dipole lies near the planetary equator rather than its pole.     

载人航天器的发射窗口及太阳能帆板的最佳受晒

首先根据载人航天器轨道运行段的基本特征,利用球面三角公式推导了：①阳光方向与载人航天器太阳能帆板法向的最佳夹角公式;②圆轨道的受晒因子公式。然后根据理论分析,引入帆板的效率系数。最后借助于计算机代数ｍａｔｈｅｍａｔｉｃａ系统,建立了一种分析帆板最佳受晒的直观、清晰、简便的方法。所得的结论为确定载人航天器的发射窗口提供了依据。     

A new modeling method of solar energetic proton events for ISO specification

Solar energetic protons degrade performance and reliability of spacecraft systems due to single-event effects, total dose effects and displacement damage in electronics components including solar cells. On designing a solar cell panel, a total fluence of solar energetic protons (SEPs) which cause solar cell damage is needed to estimate power loss of the solar cells over mission life. Nowadays a solar panel area of spacecraft is increasing as spacecraft mission life becomes longer (15–18 years). Thus an accurate SEP model is strongly required for the cost-minimum design from the aerospace industry. The SEP model, JPL-91 proposed by Feynman et al., is currently used widely for solar cell designing. However, it is known that the JPL-91 model predicts higher fluences of protons than values actually experienced in space, especially after 7 years on orbit. In addition, the model is based on several assumptions, and also needs Monte-Carlo simulations for calculating fluences. In this study, we propose a new method for modeling SEPs especially focused on solar cell degradation. The newly-proposed method is empirical, which constructs a model based directly upon proton flux measurement data taken by instruments onboard spacecraft. This method has neither assumptions nor dependence on SEP event selection, both of which are needed in JPL-91. The model fluences derived from this method show lower fluences in longer missions compared to JPL-91. This method has been proposed to ISO (International Organization for Standardization) and has been discussed for a new standard SEP model.     

Antiparticle content in the magnetosphere

In the present work we assess the stable and transient antiparticle content of planetary magnetospheres, and subsequently we consider their capture and application to high delta-v space propulsion. We estimate the total antiparticle mass contained within the Earth’s magnetosphere to assess the expediency of such usage. Using Earth’s magnetic field region as an example, we have considered the various source mechanisms that are applicable to a planetary magnetosphere, the confinement duration versus transport processes, and the antiparticle loss mechanisms. We have estimated the content of the trapped population of antiparticles magnetically confined following production in the exosphere due to nuclear interactions between high energy cosmic rays (CR) and constituents of the residual planetary upper atmosphere.The galactic antiprotons that directly penetrate into the Earth’s magnetosphere are themselves secondary by its nature, i.e. produced in nuclear reactions of the cosmic rays passing through the interstellar matter. These antiproton fluxes are modified, dependent on energy, when penetrating into the heliosphere and subsequently into planetary magnetospheres. During its lifetime in the Galaxy, CR pass through the small grammage of the interstellar matter where they produce secondary antiprotons. In contrast to this, antiprotons generated by the same CR in magnetosphere are locally produced at a path length of several tens g/cm² of matter in the ambient planetary upper atmosphere. Due to the latter process, the resulting magnetically confined fluxes significantly exceed the fluxes of the galactic antiprotons in the Earth’s vicinity by up to two orders of magnitude at some energies.The radiation belt antiparticles can possibly be extracted with an electromagnetic-based “scoop” device. The antiparticles could be concentrated by and then stored within the superimposed magnetic field structure of such a device. In future developments, it is anticipated that the energy of the captured antiparticles (both rest energy and kinetic energy) can be adapted for use as a fuel for propelling spacecraft to high velocities for remote solar system missions.     

Development of a thin section device for space exploration: Rock cutting mechanism

We have developed a rock cutting mechanism for in situ planetary exploration based on abrasive diamond impregnated wire. Performance characteristics of the rock cutter, including cutting rate on several rock types, cutting surface lifetime, and cut rock surface finish are presented. The rock cutter was developed as part of a broader effort to develop an in situ automated rock thin section (IS-ARTS) instrument. The objective of IS-ARTS was to develop an instrument capable of producing petrographic rock thin sections on a planetary science spacecraft. The rock cutting mechanism may also be useful to other planetary science missions with in situ instruments in which sub-sampling and rock surface preparation are necessary.     

Modern aspects of planetary protection and requirements to sterilization of space hardware.

The viewpoint of working group of Russian experts on the problem of planetary protection for future manned and unmanned Mars mission is presented. Recent data of Martian environment and on survival of terrestrial microorganisms in extreme conditions were used for detailed analysis and overview of planetary protection measures in regard to all possible flight situations including accidental landing. The special emphasis on "Mars-94" mission was done. This analysis resulted in revised formulation of spacecraft sterilization requirements and possible measures for their best implementation. New general combined approach to spacecraft sterilization was proposed. It includes penetrating radiation and heat treatment of spacecraft parts and components which is to be carried out before the final assembly of spacecraft and gaseous radiation sterilization of the whole spacecraft during the flight to Mars (or from Mars for return missions).     

Implementing planetary protection requirements for sample return missions.

NASA is committed to exploring space while avoiding the biological contamination of other solar system bodies and protecting the Earth against potential harm from materials returned from space. NASA's planetary protection program evaluates missions (with external advice from the US National Research Council and others) and imposes particular constraints on individual missions to achieve these objectives. In 1997 the National Research Council's Space Studies Board published the report, Mars Sample Return: Issues and Recommendations, which reported advice to NASA on Mars sample return missions, complementing their 1992 report, The Biological Contamination of Mars Issues and Recommendations. Meanwhile, NASA has requested a new Space Studies Board study to address sample returns from bodies other than Mars. This study recognizes the variety of worlds that have been opened up to NASA and its partners by small, relatively inexpensive, missions of the Discovery class, as well as the reshaping of our ideas about life in the solar system that have been occasioned by the Galileo spacecraft's discovery that an ocean under the ice on Jupiter's moon Europa might, indeed, exist. This paper will report on NASA's planned implementation of planetary protection provisions based on these recent National Research Council recommendations, and will suggest measures for incorporation in the planetary protection policy of COSPAR.     

Development of a thin section device for space exploration: Overview and system performance estimates

In this paper we present a conceptual design of a spaceborne instrument for the in situ production of rock thin sections on planetary surfaces. The in situ Automated Rock Thin Section Instrument (IS-ARTS) conceptual design demonstrates that the in situ production of thin sections on a planetary body is a plausible new instrument capability for future planetary exploration. Thin section analysis would reduce much ambiguity in the geological history of a sampled site that is present with instruments currently flown. The technical challenge of producing a thin section device compatible with the spacecraft environment is formidable and has been thought too technically difficult to be practical. Terrestrial thin section preparation requires a skilled petrographist, several preparation instruments that individually exceed typical spacecraft mass and power limits, and consumable materials that are not easily compatible with spaceflight. In two companion papers we present research and development work used to constrain the capabilities of IS-ARTS in the technical space compatible with the spacecraft environment. For the design configuration shown we conclude that a device can be constructed that is capable of 50 sample preparations over a 2 year lifespan with mass, power, and volume constraints compatible with current landed Mars mission configurations. The technical requirements of IS-ARTS (mass, power and number of samples produced) depend strongly on the sample mechanical properties, sample processing rate, the sample size and number of samples to be produced.     

Automated design architectures for co-orbiting spacecraft swarms for planetary moon mapping

This work describes the design and optimization of spacecraft swarm missions to meet spatial and temporal visual mapping requirements of missions to planetary moons, using resonant co-orbits. The algorithms described here are a part of Integrated Design Engineering and Automation of Swarms (IDEAS), a spacecraft swarm mission design software that automates the design trajectories, swarm, and spacecraft behaviors in the mission. In the current work, we focus on the swarm design and optimization features of IDEAS, while showing the interaction between the different design modules. In the design segment, we consider the coverage requirements of two general planetary moon mapping missions: global surface mapping and region of interest observation. The configuration of the swarm co-orbits for the two missions is described, where the participating spacecraft have resonant encounters with the moon on their orbital apoapsis. We relate the swarm design to trajectory design through the orbit insertion maneuver performed on the interplanetary trajectory using aero-braking. We then present algorithms to model visual coverage, and collision avoidance in the swarm. To demonstrate the interaction between different design modules, we relate the trajectory and swarm to spacecraft design through fuel mass, and mission cost estimations using preliminary models. In the optimization segment, we formulate the trajectory and swarm design optimizations for the two missions as Mixed Integer Nonlinear Programming (MINLP) problems. In the current work, we use Genetic Algorithm as the primary optimization solver. However, we also use the Particle Swarm Optimizer to compare the optimizer performance. Finally, the algorithms described here are demonstrated through numerical case studies, where the two visual mapping missions are designed to explore the Martian moon Deimos.     

太阳电池空间标定技术初探

随着各种新型空间太阳电池的发展和应用,在地面使用太阳模拟器对AMO标准太阳电池进行标定的方法在理论和实践上都遇到了严重的困难,最能反映其实际使用状态的空间标定成为解决问题的理想方案。国外太阳电池空间标定技术已十分成熟,主要航天国家如美国、欧洲、日本、巴西等都进行了各自的空间标定实验。北京东方计量测试研究所进行了太阳电池空间标定原理样机的研制工作。样机由太阳电池板、数据采集与处理模块、太阳敏感器和温度传感器组成,可同时对32路国产砷化镓多结太阳电池进行短路电流的测量,电流测试的标准不确定度小于0.5%(最佳点)。此项研究将形成标准太阳电池空间标定的完整方案,促进我国新型空间太阳电池的研究和应用。