Spin axis orientation of Ajisai determined from Graz 2 kHz SLR data

The Graz 2 kHz Satellite Laser Ranging (SLR) measurements allow determination of the spin axis orientation of the geodetic satellite Ajisai. The high repetition rate of the laser makes it possible to determine the epoch time when the laser is pointing directly between two corner cube reflector (CCR) rings of the satellite. Identification of many such events during a few (up to 3) consecutive passes allows to state the satellite orientation in the celestial coordinate system. Six years of 2 kHz SLR data (October 2003–October 2009) delivered 331 orientation values which clearly show precession of the axis along a cone centered at 14^h56^m2.8^s in right ascension and 88.512° in declination (J2000.0 celestial reference frame) and with an half-aperture angle θ of 1.405°. The spin axis precesses with a period of 117 days, which is equal to the period of the right ascension of the ascending node of Ajisai’s orbit. We present a model of the axis precession which allows prediction of the satellite orientation – necessary for the envisaged laser time transfer via Ajisai mirrors.     

Spin parameters of Low Earth Orbiting satellites Larets and Stella determined from Satellite Laser Ranging data

Satellite Laser Ranging (SLR) measurements contain information about the spin parameters of the fully passive, geodetic satellites. In this paper we spectrally analyze the SLR data of 5 geodetic satellites placed on the Low Earth Orbits: GFZ-1, WESTPAC, Larets, Starlette, Stella, and successfully retrieve the frequency signal from Larets and Stella only. The obtained signals indicate an exponential increase of the spin period of Larets: T = 0.860499·exp(0.0197066·D) [s], and Stella: T = 13.5582·exp(0.00431232·D) [s], where D is in days since launch. The initial spin periods calculated from the first month of the SLR observations are: Larets: T_initial = 0.8239 s, Stella: T_initial = 13.2048 s. Analysis of the apparent effects indicates the counter-clockwise spin direction of the satellites. The twice more heavy Stella lost its rotational energy more than four times slower than Larets. Fitting the spin model to the observed spin trends allows determination of the spin axis orientation evolution for Larets and Stella before their rotational period becomes equal to the orbital period.     

Spin parameters of nanosatellite BLITS determined from Graz 2 kHz SLR data

The nanosatellite BLITS (Ball Lens In The Space) is the first object designed as a passive, spherical retroreflector of the Luneburg type, dedicated for Satellite Laser Ranging (SLR). The 2 kHz SLR station Graz measures spin parameters of this satellite, providing information about the rotational dynamics of the body. The measurements obtained during the period from September 26, 2009 to November 24, 2010 show a significant change of the spin configuration. The spin axis was dynamically precessing since the launch and currently is sinus-like behaving between coordinates RA 120°…150°, Dec 30°…60° (J2000 inertial reference frame). The angle between the symmetry axis and the spin axis of BLITS is not constant, but is decreasing since the launch, while its spin period is rather stable with a mean value of 5.613 s (clockwise rotation). The satellite was dynamically changing its attitude during the first three months after deployment; after this time the spin parameters are relatively stable.     

Comparing IRI and a regional model with ionosonde measurements in Pakistan

We have used the technique of expansion in Empirical Orthogonal Functions (EOFs) to develop regional models of the critical frequencies of E and F₂ layers (f_oE, f_oF₂), peak height (h_mF₂), and semi-thickness of F₂ layer (Y_mF₂) over Pakistan. In the present study levels of solar activity specified by Smoothed Sunspot Number (R) from 10 to 200 are taken into account. The magnetic dip angle for the model ranges from 30° to 60°. We have compared the regional model and the International Reference Ionosphere (IRI) with measurements of three ionosondes in Pakistan. The model parameters f_oE and f_oF₂ are found overall comparable to the observed hourly median values during daytime at Karachi (geographic latitude = 24.95°N, longitude = 67.13°E, magnetic inclination = 37°), Multan (30.18°N, 71.48°E, 45°) and Islamabad (33.75°N, 73.13°E, 51.5°) during the years 1988, 1996 and 2000. For h_mF₂ the computed values by regional and IRI model for the year 1995 are found close to each other. However, for Y_mF₂the results are better during daytime as compared to nighttime.     

Contribution of satellite laser ranging to combined gravity field models

In the framework of satellite-only gravity field modeling, satellite laser ranging (SLR) data is typically exploited to recover long-wavelength features. This contribution provides a detailed discussion of the SLR component of GOCO02S, the latest release of combined models within the GOCO series. Over a period of five years (January 2006 to December 2010), observations to LAGEOS-1, LAGEOS-2, Ajisai, Stella, and Starlette were analyzed. We conducted a series of closed-loop simulations and found that estimating monthly sets of spherical harmonic coefficients beyond degree five leads to exceedingly ill-posed normal equation systems. Therefore, we adopted degree five as the spectral resolution for real data analysis. We compared our monthly coefficient estimates of degree two with SLR and Gravity Recovery and Climate Experiment (GRACE) time series provided by the Center for Space Research (CSR) at Austin, Texas. Significant deviations in C₂₀ were noted between SLR and GRACE; the agreement is better for the non-zonal coefficients. Fitting sinusoids together with a linear trend to our C₂₀ time series yielded a rate of (−1.75 ± 0.6) × 10⁻¹¹/yr; this drift is equivalent to a geoid change from pole to equator of 0.35 ± 0.12 mm/yr or an apparent Greenland mass loss of 178.5 ± 61.2 km³/yr. The mean of all monthly solutions, averaged over the five-year period, served as input for the satellite-only model GOCO02S. The contribution of SLR to the combined gravity field model is highest for C₂₀, and hence is essential for the determination of the Earth’s oblateness.     

Cowpeas and pinto beans: Performance and yields of candidate space crops in the laboratory biosphere closed ecological system

An experiment utilizing cowpeas (Vigna unguiculata L.), pinto beans (Phaseolus vulgaris L.) and Apogee ultra-dwarf wheat (Triticum sativa L.) was conducted in the soil-based closed ecological facility, Laboratory Biosphere, from February to May 2005. The lighting regime was 13 h light/11 h dark at a light intensity of 960 μmol m⁻² s⁻¹, 45 mol m⁻² day⁻¹ supplied by high-pressure sodium lamps. The pinto beans and cowpeas were grown at two different planting densities. Pinto bean production was 341.5 g dry seed m⁻² (5.42 g m⁻² day⁻¹) and 579.5 dry seed m⁻² (9.20 g m⁻² day⁻¹) at planted densities of 32.5 plants m⁻² and 37.5 plants m⁻², respectively. Cowpea yielded 187.9 g dry seed m⁻² (2.21 g m⁻² day⁻¹) and 348.8 dry seed m⁻² (4.10 g m⁻² day⁻¹) at planted densities of 20.8 plants m⁻² and 27.7 plants m⁻², respectively. The crop was grown at elevated atmospheric carbon dioxide levels, with levels ranging from 300–3000 ppm daily during the majority of the crop cycle. During early stages (first 10 days) of the crop, CO₂ was allowed to rise to 7860 ppm while soil respiration dominated, and then was brought down by plant photosynthesis. CO₂ was injected 27 times during days 29–71 to replenish CO₂ used by the crop during photosynthesis. Temperature regime was 24–28 °C day/deg 20–24 °C night. Pinto bean matured and was harvested 20 days earlier than is typical for this variety, while the cowpea, which had trouble establishing, took 25 days more for harvest than typical for this variety. Productivity and atmospheric dynamic results of these studies contribute toward the design of an envisioned ground-based test bed prototype Mars base.     

22 Years of AJISAI spin period determination from standard SLR and kHz SLR data

Satellite Laser Ranging (SLR) is a powerful and efficient technique to measure spin parameters of satellites equipped with corner cube reflectors. We obtained spin period determination of the satellite AJISAI from SLR data only: 17246 pass-by-pass estimates from standard 1–15 Hz SLR data (14/Aug/1986–30/Dec/2008) and 1444 pass-by-pass estimates (9/Oct/2003–30/Dec/2008) from data of the first 2 kHz SLR system from Graz, Austria. A continuous history of the slowing down of AJISAI spin is derived from frequency analysis, and corrected for the apparent effects. The apparent corrections, elaborated here, allowed very accurate determination of AJISAI initial spin period: 1.4855 ± 0.0007 [s]. The paper identifies also non-gravitational effects as a source of the periodical changes in the rate of slowing down of the satellite.     

Estimation of the Love and Shida numbers: h2, l2 using SLR data for the low satellites

In this paper we present results for the global elastic parameters: Love number h₂ and Shida number l₂ derived from the analysis of Satellite Laser Ranging (SLR) data. SLR data for the two low satellites STELLA (H = 800 km) and STARLETTE (H = 810 km) observed during 2.5 years from January 3, 2005 until July 1, 2007 with 18 globally distributed ground stations were analyzed. The analysis was done separately for the two satellites. We do a sequential analysis and study the stability and convergence of the estimates as a function of length of the data set used.     

Spin parameters of High Earth Orbiting satellites Etalon-1 and Etalon-2 determined from kHz Satellite Laser Ranging data

The high repetition rate Satellite Laser Ranging (SLR) system developed in Graz, Austria, measures ranges to the High Earth Orbiting satellites Etalon-1 and Etalon-2 with the millimeter accuracy. The 2 kHz repetition rate of the laser and the relatively high return rates allow to use the SLR data to calculate the spin parameters of the Etalon satellites. The analysis of the 10 years (October 2003–September 2013) of the SLR data gives trends of the spin axes orientation (J2000 Inertial Reference Frame):     

Tolerance of chufa (Cyperus esculentus L.) plants,representing the higher plant compartment in bioregenerative life support systems,to super-optimal air temperatures

Plants intended to be included in the photosynthesizing compartment of the bioregenerative life support system (BLSS) need to be studied in terms of both their production parameters under optimal conditions and their tolerance to stress factors that might be caused by emergency situations. The purpose of this study was to investigate tolerance of chufa (Cyperus esculentus L.) plants to the super-optimal air temperature of 45 ± 1 °C as dependent upon PAR (photosynthetically active radiation) intensity and the duration of the exposure to the stress factor. Chufa plants were grown hydroponically, on expanded clay, under artificial light. The nutrient solution was Knop’s mineral medium. Until the plants were 30 days old, they had been grown at 690 μmol m⁻² s⁻¹ PAR and air temperature 25 °C. Thirty-day-old plants were exposed to the temperature 45 °C for 6 h, 20 h, and 44 h at PAR intensities 690 μmol m⁻² s⁻¹ and 1150 μmol m⁻² s⁻¹. The exposure to the damaging air temperature for 44 h at 690 μmol m⁻² s⁻¹ PAR caused irreversible damage to PSA, resulting in leaf mortality. In chufa plants exposed to heat shock treatment at 690 μmol m⁻² s⁻¹ PAR for 6 h and 20 h, respiration exceeded photosynthesis, and CO₂ release in the light was recorded. Functional activity of photosynthetic apparatus, estimated from parameters of pulse-modulated chlorophyll fluorescence in Photosystem 2 (PS 2), decreased 40% to 50%. After the exposure to the stress factor was finished, functional activity of PSA recovered its initial values, and apparent photosynthesis (P_apparent) rate after a 20-h exposure to the stress factor was 2.6 times lower than before the elevation of the temperature. During the first hours of plant exposure to the temperature 45 °C at 1150 μmol m⁻² s⁻¹ PAR, respiration rate was higher than photosynthesis rate, but after 3–4 h of the exposure, photosynthetic processes exceeded oxidative ones and CO₂ absorption in the light was recorded. At the end of the 6-h exposure, P_apparent rate was close to that recorded prior to the exposure, and no significant changes were observed in the functional activity of PSA. At the end of the 20-h exposure, P_apparent rate was close to its initial value, but certain parameters of the functional activity of PSA decreased 25% vs. their initial values. During the repair period, the parameters of external gas exchange recovered their initial values, and parameters of pulse-modulated chlorophyll fluorescence were 20–30% higher than their initial values. Thus, exposure of chufa plants to the damaging temperature of the air for 20 h did not cause any irreversible damage to the photosynthetic apparatus of plants at either 690 μmol m⁻² s⁻¹ or 1150 μmol m⁻² s⁻¹ PAR, and higher PAR intensity during the heat shock treatment enhanced heat tolerance of the plants.     

Spectral filter for signal identification in the kHz SLR measurements of the fast spinning satellite Ajisai

The high repetition rate satellite laser ranging (SLR) measurements to the fast spinning satellites contain a frequency signal caused by the rotational motion of the corner cube reflector (CCR) array. The spectral filter, developed here, is based on the Lomb algorithm, and is tested with the simulated and the observed high repetition rate SLR data of the geodetic satellite Ajisai (spin period ∼2 s). The filter allows for the noise elimination from the SLR data, and for identification of the returns from the single CCRs of the array – even for the low return rates. Applying the spectral filter to the simulated SLR data increases the S/N ratio by a factor 40–45% for all return rates. Filtering out the noise from the observed data strengthens the frequency signal by factor of ∼25 for the low return rates, which significantly helps to determine the spin phase of the satellite. The spectral filter is applied to the Graz SLR data and the spin rates of Ajisai are determined by two different methods: the frequency analysis and the phase determination of the spinning retroreflector array.The analysis of more than 8 years of the Graz SLR measurements indicates an exponential spin rate trend: f = 0.67034 exp(−0.0148542 Y) [Hz], RMS = 0.085 mHz, where Y is the year since launch. The highly accurate spin rate information demonstrates periodic changes related to the precession of the orbital plane of Ajisai, as it determines the amount of energy received by the satellite from the Sun. The rate of deceleration of Ajisai is not constant: the half life period of the satellite’s spin oscillates around 46.7 years with an amplitude of about 5 years.     

Laser measurements to space debris from Graz SLR station

In order to test laser ranging possibilities to space debris objects, the Satellite Laser Ranging (SLR) Station Graz installed a frequency doubled Nd:YAG pulse laser with a 1 kHz repetition rate, a pulse width of 10 ns, and a pulse energy of 25 mJ at 532 nm (on loan from German Aerospace Center Stuttgart – DLR). We developed and built low-noise single-photon detection units to enable laser ranging to targets with inaccurate orbit predictions, and adapted our standard SLR software to include a few hundred space debris targets. With this configuration, we successfully tracked – within 13 early-evening sessions of each about 1.5 h – 85 passes of 43 different space debris targets, in distances between 600 km and up to more than 2500 km, with radar cross sections from >15 m² down to <0.3 m², and measured their distances with an average precision of about 0.7 m RMS.     

Quantifying the relationship between the measurement precision and specifications of a UV/visible sensor on a geostationary satellite

To investigate the feasibility of new satellite observations, including air quality (AQ) observations from geostationary (GEO) orbit, it is essential to link the measurement precision (ε) with sensor specifications in advance. The present study attempts to formulate the linkage between ε and specifications of a UV/visible sensor (signal-to-noise ratio (SNR), full width at half maximum (FWHM) of the slit function, and sampling ratio (SR)) on a GEO satellite. A sophisticated radiative transfer model (JACOSPAR) is used to calculate synthetic radiance spectra that would be measured by a UV/visible sensor observing the atmosphere over Tokyo (35.7°N, 139.7°E) from GEO orbit at 120°E longitude. The spectra, modified according to given sensor specifications, are analyzed by the differential optical absorption spectroscopy technique to estimate the ε for slant column densities of O₃ and NO₂. We find clear relationships: for example, the ε of the O₃ slant column density (molecules cm⁻²) and SNR at 330 nm are linked by the equation log(ε) = −1.06 · log(SNR) + 20.71 in the UV region, and the ε of the NO₂ slant column density and SNR at 450 nm are linked by log(ε) = −0.98 · log(SNR) + 18.00, at a FWHM = 0.6 nm (for the Gaussian slit function) and SR = 4. The relationships are mostly independent of other specifications (e.g., horizontal and temporal resolutions), as they affect ε primarily through SNR, providing constraints in determining the optimal SNR (and alternatively FWHM and SR) for similar UV/visible sensors dedicated for AQ studies.     

A simple model to predict solar radiation under clear sky conditions

Solar radiation is one of the major factors that dominate the thermal behaviors of aerostats in the daytime and the primary energy source of high altitude long endurance aerostats. Therefore, it is necessary to propose an accurate model to predict the solar irradiances. A comprehensive review of the well-known solar radiation models is conducted to help develop the new model. Based on the analysis of the existing models and the available radiation data, the extensive computer tests of the regression and optimization are conducted, from which the new solar radiation model for direct and diffuse irradiances under clear sky conditions is proposed. The new model has excellent prediction accuracy. The coefficient of determination for direct radiation is 0.992, with the root mean square error (RMSE) of 16.9 W/m² and the mean absolute error (MAE) of 2.2%. The coefficient of determination for diffuse radiation is 0.86, with RMSE = 8.7 W/m² and MAE = 9.9%. Comparisons with the well-known existing models show that the new model is much more accurate than the best existing ones.     

Compact frequency standard using atoms trapped on a chip

We present a compact atomic frequency standard based on the interrogation of magnetically trapped ⁸⁷Rb atoms. Two photons, in the microwave and radiofrequency domain excite the atomic transition. At a magnetic field of 3.23 G this transition from ∣F = 1, m_F = −1〉 to ∣F = 2, m_F = 1〉 is 1st order insensitive to magnetic field variations. Long Ramsey interrogation times can thus be achieved, leading to a projected stability in the low 10⁻¹³ at 1 s. This makes this device a viable alternative to LITE and HORACE as a good candidate for replacing or complementing the rubidium frequency standards and passive hydrogen masers already on board of the GPS, GLONASS, and GALILEO satellites. Here we present preliminary results. We use an atom chip to cool and trap the atoms. A coplanar waveguide is integrated to the chip to carry the Ramsey interrogation signal, making the physics package potentially as small as (5 cm)³. We describe the experimental apparatus and show preliminary Ramsey fringes of 1.25 Hz linewidth. We also show a preliminary frequency stability σ_y = 1.5 × 10⁻¹²τ^−1/2 for 10 < τ < 10³ s. This represents one order of magnitude improvement with respect to previous experiments.     

Gas exchange rates of potato stands for bioregenerative life support

Plants can provide a means for removing carbon dioxide (CO₂) while generating oxygen (O₂) and clean water for life support systems in space. To study this, 20 m² stands of potato (Solanum tuberosum L.) plants were grown in a large (113 m³ vol.), atmospherically closed chamber. Photosynthetic uptake of CO₂ by the stands was detected about 10 DAP (days after planting), after which photosynthetic rates rose rapidly as stand ground cover and total light interception increased. Photosynthetic rates peaked ca. 50 DAP near 45 μmol CO₂ m⁻² s⁻¹ under 865 μmol m⁻² s⁻¹ PPF (average photosynthetic photon flux), and near 35 μmol CO₂ m⁻² s⁻¹ under 655 μmol m⁻² s⁻¹ PPF. Short term changes in PPF caused a linear response in stand photosynthetic rates up to 1100 μmol m⁻² s⁻¹ PPF, with a light compensation point of 185 μmol m⁻² s⁻¹ PPF. Comparisons of stand photosynthetic rates at different CO₂ concentrations showed a classic C₃ response, with saturation occurring near 1200 μmol mol⁻¹ CO₂ and compensation near 100 μmol mol⁻¹ CO₂. In one study, the photoperiod was changed from 12 h light/12 h dark to continuous light at 58 DAP. This caused a decrease in net photosynthetic rates within 48 h and eventual damage (scorching) of upper canopy leaves, suggesting the abrupt change stressed the plants and/or caused feedback effects on photosynthesis. Dark period (night) respiration rates increased during early growth as standing biomass increased and peaked near 9 μmol CO₂ m⁻² s⁻¹ ca. 50 DAP, after which rates declined gradually with age. Stand transpiration showed a rapid rise with canopy ground cover and peaked ca. 50 DAP near 8.9 L m⁻² d⁻¹ under 860 μmol m⁻² s⁻¹ PPF and near 6.3 L m⁻² d⁻¹ under 650 μmol m⁻² s⁻¹ PPF. Based on the best photosynthetic rates from these studies, approximately 25 m² of potato plants under continuous cultivation would be required to support the CO₂ removal and O₂ requirements for one person.     

Effect of vertical plasma transport on ionospheric F2-region parameters at equatorial latitude

The variability of the F2-layer even during magnetically quiet times are fairly complex owing to the effects of plasma transport. The vertical E × B drift velocities (estimated from simplified electron density continuity equation) were used to investigate the seasonal effects of the vertical ion drifts on the bottomside daytime ionospheric parameters over an equatorial latitude in West Africa, Ibadan, Nigeria (Geographic: 7.4°N, 3.9°E, dip angle: 6°S) using 1 year of ionsonde data during International Geophysical Year (IGY) of 1958, that correspond to a period of high solar activity for quiet conditions. The variation patterns between the changes of the vertical ion drifts and the ionospheric F2-layer parameters, especially; f_oF₂ and h_mF₂ are seen remarkable. On the other hand, we observed strong anti-correlation between vertical drift velocities and h′F in all the seasons. We found no clear trend between N_mF₂ and h_mF₂ variations. The yearly average value of upward daytime drift at 300 km altitude was a little less than the generally reported magnitude of 20 ms⁻¹ for equatorial F-region in published literature, and the largest upward velocity was roughly 32 ms⁻¹. Our results indicate that vertical plasma drifts; ionospheric F2-layer peak height, and the critical frequency of F2-layer appear to be somewhat interconnected.     

ETALON spin period determination from kHz SLR data

Using kHz Satellite LASER Ranging (SLR) data of the SLR station Graz only, we determined the spin periods of the two ETALON satellites – launched into high orbits of about 20,000 km – and their spin period increase during 3 years. The determined spin period values and spin period increase rates at 2004-01-01 are: T_ET1 = 63 s + 0.484 s/year, and T_ET2 = 65.5 s + 0.401 s/year.     

Effects of mineral nutrition conditions on heat tolerance of chufa (Сyperus esculentus L.) plant communities to super optimal air temperatures in the BTLSS

The use of mineralized human wastes as a basis for nutrient solutions will increase the degree of material closure of bio-technical human life support systems. As stress tolerance of plants is determined, among other factors, by the conditions under which they have been grown before exposure to a stressor, the purpose of the study is to investigate the level of tolerance of chufa (Cyperus esculentus L.) plant communities grown in solutions based on mineralized human wastes to a damaging air temperature, 45 °C. Experiments were performed with 30-day-old chufa plant communities grown hydroponically, on expanded clay aggregate, under artificial light, at 690 μmol m⁻² s⁻¹ PAR and at a temperature of 25 °C. Plants were grown in Knop’s solution and solutions based on human wastes mineralized according to Yu.A. Kudenko’s method, which contained nitrogen either as ammonium and urea or as nitrates. The heat shock treatment lasted 20 h at 690 and 1150 μmol m⁻² s⁻¹ PAR. Chufa heat tolerance was evaluated based on parameters of CO₂ gas exchange, the state of its photosynthetic apparatus (PSA), and intensity of peroxidation of leaf lipids. Chufa plants grown in the solutions based on mineralized human wastes that contained ammonium and urea had lower heat tolerance than plants grown in standard mineral solutions. Heat tolerance of the plants grown in the solutions based on mineralized human wastes that mainly contained nitrate nitrogen was insignificantly different from the heat tolerance of the plants grown in standard mineral solutions. A PAR intensity increase from 690 μmol m⁻² s⁻¹ to 1150 μmol m⁻² s⁻¹ enhanced heat tolerance of chufa plant communities, irrespective of the conditions of mineral nutrition under which they had been grown.     

Solar cycle effect on temporal and spatial variation of topside ion density measured by SROSS C2 and ROCSAT 1 over the Indian longitude sector

We investigated the diurnal, seasonal and latitudinal variations of ion density Ni over the Indian low and equatorial topside ionosphere within 17.5°S to 17.5°N magnetic latitudes by combining the data from SROSS C2 and ROCSAT 1 for the 9 year period from 1995 to 2003 during solar cycle 23. The diurnal maximum density is found in the local noon or in the afternoon hours and the minimum occurs in the pre sunrise hours. The density is higher during the equinoxes as compared to that in the June and December solstice. The local time spread of the daytime maximum ion density increases with increase in solar activity. A north south asymmetry with higher ion density over northern hemisphere in the June solstice and over southern hemisphere in December solstice has been observed in moderate and high solar activity years. The crest to crest distance increases with increase in solar flux. Ion density bears a nonlinear relationship with F_10.7 cm solar flux and EUV flux in general. The density increases linearly with solar flux up to ∼150 sfu (1 sfu = 10⁻²²Wm⁻²Hz⁻¹) and EUV flux up to ∼50 units (10⁹ photons cm⁻² s⁻¹). But beyond this the density saturates. Inverse saturation and linear relationship have been observed in some season or latitude also. Inter-comparison of the three solar activity indices F_10.7 cm flux, EUV flux and F_10.7P (= (F_10.7 + F_10.7A)/2, where F_10.7A is the 81 day running average value of F_10.7) shows that the ion density correlates better with F_10.7P and F_10.7 cm fluxes. The annual average daytime total ion density from 1995 to 2003 follows a hysteresis loop as the solar cycle reverses. The ion density at 500 km over the Indian longitude sector as obtained by the international reference ionosphere is in general lower than the measured densities during moderate and high solar activity years. In low solar activity years the model densities are equal or higher than measured densities. The IRI EIA peaks are symmetric (±10°) in equinox while densities are higher at 10°N in June solstice and at 10°S in the December solstice. The model density follows F_10.7 linearly up to about F_10.7 > ∼150 sfu and then saturates.