Working and walking on small asteroids with circumferential ropes

The low gravity of a small asteroid would present a challenge for an astronaut attempting to work on its surface. Extravehicular activities (EVAs) of the sophistication of the Apollo Moon missions are not likely to be possible if astronauts attempt to walk freely on the asteroid, hover above its surface, or anchor locally into the regolith. Manipulating large rocks, drilling, and excavating at multiple locations is a high priority science objective, but would be difficult without a hold-down mechanism. If the asteroid has even a small rotation rate, maneuvering precisely over its surface could be cumbersome. A plausible means of conducting complex EVAs is to tie ropes entirely around the asteroid, under which the astronaut is pushed downward onto the asteroid surface by the tension in the rope. The downward force provides an artificial gravity that permits the astronaut to drill, excavate, hammer, and carefully document materials on the surface without the worry of being thrown from the asteroid. An astronaut could also use the ropes as handholds or guides to maneuver freely over the surface.     

序列凸优化的小天体附着轨迹优化

针对小天体附着多约束轨迹优化问题,提出一种基于序列凸优化的轨迹优化方法。首先采用内球谐引力场模型对目标小天体附近的不规则引力场进行精确建模,内球谐引力场模型是对经典球谐系数法的改进,形式简单,计算量小,并且克服了经典球谐系数模型在形状不规则的小天体附近不收敛的问题。对于小天体附着多约束轨迹优化问题,通过约束松弛、线性化、离散化过程,转化为一个可以迭代求解的二阶锥规划问题（SOCP）,进而采用内点法进行解算。数学仿真结果显示,优化结果符合各项约束条件,以零速度到达了目标着陆点,且符合燃耗最优的优化目标。利用序列凸优化算法进行小天体附着燃耗最优轨迹设计,推导简便,计算速度快,精度高,具有应用价值。     

Assessment on the feasibility of future shepherding of asteroid resources

Most plausible futures for space exploration and exploitation require a large mass in Earth orbit. Delivering this mass requires overcoming the Earth's natural gravity well, which imposes a distinct obstacle to any future space venture. An alternative solution is to search for more accessible resources elsewhere. In particular, this paper examines the possibility of future utilisation of near Earth asteroid resources. The accessibility of asteroid material can be estimated by analysing the volume of Keplerian orbital element space from which Earth can be reached under a certain energy threshold and then by mapping this analysis onto an existing statistical near Earth objects (NEO) model. Earth is reached through orbital transfers defined by a series of impulsive manoeuvres and computed using the patched-conic approximation. The NEO model allows an estimation of the probability of finding an object that could be transferred with a given Δv budget. For the first time, a resource map provides a realistic assessment of the mass of material resources in near Earth space as a function of energy investment. The results show that there is a considerable mass of resources that can be accessed and exploited at relatively low levels of energy. More importantly, asteroid resources can be accessed with an entire spectrum of levels of energy, unlike other more massive bodies such as the Earth or Moon, which require a minimum energy threshold implicit in their gravity well. With this resource map, the total change of velocity required to capture an asteroid, or transfer its resources to Earth, can be estimated as a function of object size. Thus, realistic examples of asteroid resource utilisation can be provided.     

Small carry-on impactor of Hayabusa2 mission

A Japanese spacecraft, Hayabusa2, the successor of Hayabusa, which came back from the Asteroid Itokawa with sample materials after its 7-year-interplanetary journeys, is a current mission of Japan Aerospace Exploration Agency (JAXA) and scheduled to be launched in 2014. Although its design basically follows Hayabusa, some new components are planned to be equipped in Hayabusa2 mission. A Small Carry-on Impactor (SCI), a small explosive device, is one of the challenges that were not seen with Hayabusa. An important scientific objective of Hayabusa2 is to investigate chemical and physical properties of the internal materials and structures. SCI creates an artificial crater on the surface of the asteroid and the mother spacecraft observes the crater and tries to get sample materials. High kinetic energy is required to creating a meaningful crater. The SCI would become complicated and heavy if the traditional acceleration devices like thrusters and rocket motors are used to hit the asteroid because the acceleration distance is quite large and guidance system is necessary. In order to make the system simpler, a technology of special type of shaped charge is used for the acceleration of the impact head. By using this technology, it becomes possible to accelerate the impact head very quickly and to hit the asteroid without guidance system. However, the impact operation should be complicated because SCI uses powerful explosive and it scatters high speed debris at the detonation. This paper presents the overview of our new small carry-on impact system and the impact operation of Hayabusa2 mission.     

Geologic field work on Mars: Distance and time issues during surface exploration

Based on field experience at Analogue stations MDRS and FMARS and additional theoretical computations, motorized field work traverses were planned for various surface feature types on Mars, with emphasis on their horizontal dimension, maximal slope angle and cumulative vertical surface undulation or roughness. The aim was to explore the possibilities and characteristics of field work for different terrain types. Those terrain types are reviewed in the present study that have already been analyzed based on remote sensing data, and that are described in the scientific literature.Dunes, gullies, slope streaks, cross sections of valley networks and of lava channels might be analyzed during only one extra vehicular activity (EVA, e.g., pedestrian and vehicular field work) with the objective of a first in-situ exploration along an optimized traverse, in order to provide the most valuable scientific information on their general characteristics and origin. Smaller tectonic faults, lava flows, lobate debris aprons and outcrops of polar layered deposits can be analyzed only by several EVAs together. Analysis of large landslides, calderas and interior layered deposits produce even more difficulties on Mars, and require specialized technology. In cases where several EVAs are necessary for detailed analysis along the best traverse, mobile pressurized vehicles (with pressurized cabin for astronauts without spacesuits) or other methods would be necessary.Many of the geologic structures that have been analyzed only with remotely sensed data could not be surveyed during one field campaign, and in some cases because of high slope angle and large cumulative topographic undulation, their in-situ exploration could not be accomplished with the technological capabilities available, and in-situ analysis requires more advanced technology than long distance rovers can provide now. Hence, the prior location of important sites and the usage of robotic help will be of high importance.     

A mission template for exploration and damage mitigation of potential hazard of Near Earth Asteroids

The Apophis Exploratory and Mitigation Platform (AEMP) concept was developed as a prototype mission to explore and potentially deflect the Near Earth Asteroid (NEA) 99942 Apophis. Deflection of the asteroid from the potential 2036 impact will be achieved using a gravity tractor technique, while a permanent deflection, eliminating future threats, will be imparted using a novel albedo manipulation technique. This mission will serve as an archetypal template for future missions to small NEAs and could be adapted to mitigate the threat of collision with other potential Earth-crossing objects.     

Individual differences in susceptibility to motion sickness among six Skylab astronauts

One of the Skylab experiments dealt with motion sickness, comparing susceptibility in the workshop aloft with susceptibility preflight and postflight. Tests were conducted on and after mission-day 8 (MD 8) by which time the astronauts were adapted to working conditions. Stressful accelerations were generated by requiring the astronauts, with eyes covered, to execute standardized head movements (front, back, left, and right) while in a chair that could be rotated at angular velocities up to 30 rpm. The selected endpoint was either 150 discrete head movements or a very mild level of motion sickness. In all rotation experiments aloft, the five astronauts tested (astronaut 1 did not participate) were virtually symptom free, thus demonstrating lower susceptibility aloft than in preflight and postflight tests on the ground when symptoms were always elicited. Inasmuch as the eyes were covered and the canalicular stimuli were the same aloft as on the ground, it would appear that lifting the stimulus to the otolith organs due to gravity was an important factor in reducing susceptibility to motion sickness even though the transient stimuli generated under the test conditions were substantial and abnormal in pattern. Some of the astronauts experienced motion sickness under operational conditions aloft or after splashdown, but attention is centered chiefly on symptoms manifested in zero gravity. None of the Skylab-II crew (astronauts 1 to 3) was motion sick aloft. Astronaut 6 of the Skylab-III crew (astronauts 4 to 6) experienced motion sickness within an hour after transition into orbit; this constitutes the earliest such diagnosis on record under orbital flight conditions. The eliciting stimuli were associated with head and body movements, and astronaut 6 obtained relief by avoiding such movements and by one dose of the drug combination 1-scopolamine 0.35 mg + d-amphetamine 5.0 mg. All three astronauts of Skylab-III experienced motion sickness in the workshop where astronaut 6 was most susceptible and astronaut 4, least susceptible. The higher susceptibility of SL-III crewmen in the workshop, as compared with SL-II crewmen, may be attributable to the fact that they were based in the command module less than one-third as long as SL-II crewmen. The unnatural movements, often resembling acrobatics, permitted in the open spaces of the workshop revealed the great potentialities in weightlessness for generating complex interactions of abnormal or unusual vestibular and visual stimuli. Symptoms were controlled by body restraint and by drugs, but high susceptibility to motion sickness persisted for 3 days and probably much longer; restoration was complete on MD 7. From the foregoing statements it is clear that on and after MD 8 the susceptibility of SL-II and SL-III crewmen to motion sickness under experimental conditions was indistinguishable. The role played by the acquisition of adaptation effects prior to MD 8 is less clear and is a subject to be discussed.     

航天员低重力步行训练被动外骨骼机器人模拟

针对月球或火星登陆航天员在地面进行低重力步行模拟训练的需要,提出一种采用被动重力平衡技术的外骨骼机器人系统。该系统由一台跑步机和一套可穿戴的被动机械外骨骼组成,通过将人体各主要部件的重力按比例分布转嫁到外骨骼上来达到低重力模拟效果,因此其不但可以平衡任意比例（0%-100%）的人体重力,而且可以使受训者感受到各主要关节失去相同比例重力载荷的效果,从而达到逼真模拟低重力步行。由于系统完全被动,无需施加主动关节控制力矩,同时也不用进行关节运动的离线或在线精确规划,从而避免了复杂的关节控制器及其稳定性设计和分析。动力学仿真结果表明,该外骨骼机器人系统能够逼真地模拟出不同重力条件下的步行效果。     

不规则形状小行星引力环境建模及 球谐系数求取方法

在实施小行星探测任务之前,需要对不规则形状小行星的引力场有一个清楚的认识,以便于进行环绕或着陆小行星的轨道设计。文章提出了一种小行星引力场建模及球谐系数的求取方法。首先,由多面体模型方法重构出小行星外部的引力环境并以此作为虚拟观测量。在此基础上,根据球谐系数与引力势能间的关系,通过求解超定线性方程组得到小行星引力场的各阶次球谐系数。与传统的将小行星近似成三轴椭球体进而计算球谐系数的方法相比,该方法可大幅度提高引力场建模的精度。通过与由NEAR探测器轨道数据解算的Eros433小行星的球谐系数比较表明,其最大误差不超过6%。计算表明,该方法可以为小行星探测任务发射前的轨道设计提供更为精确的数据。     

State propagation in an uncertain asteroid gravity field

Various spacecraft have been and will be sent to asteroids to characterize them. Generally, an asteroid's gravity field is very irregular and not accurately known when compared to the gravity field of a major planet, Earth in particular. It has been well studied that the irregularity significantly affects the trajectory of an orbiting spacecraft, and causes it to impact or to escape from the asteroid. Complementary to that, this paper focuses on the influence of the limited knowledge of this gravity field on the evolution of the spacecraft's orbit. It develops a general method by which this influence can be quantified. This method comprises specific Monte Carlo simulations with a discrete set of low-altitude orbits, taking into account the uncertainties in the gravity-field parameters. For illustration purposes, it is applied to two different asteroids. Already after three revolutions, the gravity-field uncertainties propagate to significant position uncertainties; this specifically holds for prograde orbits, and around the smaller asteroid. Applying this robust and accurate method helps mission designers and planners to assess the risk posed by gravity uncertainties, and take appropriate measures such as choosing the most favorable orbital geometries and/or lowering the orbit more slowly.     

载人小行星探测的任务特点与实施途径探讨

介绍了载人小行星探测的发展现状,对目前美国基于"猎户座"飞船的载人小行星探测的概要方案进行了描述,包括探测器系统组成、运载火箭和飞行方案等内容。从速度增量、目标星引力等方面,分析了载人小行星探测的任务特点,并与载人火星探测、载人月球探测以及无人小行星探测的任务特点进行了比较。给出了载人小行星探测的实施途径建议,包括目标星选择、载人飞船系统设计等。讨论了其所涉及的推进、星际飞行安全保障、小行星表面行走等关键技术。研究结果可为我国开展载人深空探测提供参考。     

Polyhedron tracking and gravity tractor asteroid deflection

In the wake of the Chelyabinsk airburst, the defense against hazardous asteroids is becoming a topic of high interest. This work improves the gravity tractor asteroid deflection approach by tracking realistic small body shapes with tilted ion engines. An algorithm for polyhedron tracking was evaluated in a fictitious impact scenario. The simulations suggest a capability increase up to 38.2% with such improved tilting strategies. The long- and short-term effects within polyhedron tracking are illustrated. In particular, the orbital reorientation effect is influential when realistic asteroid shapes and rotations are accounted for. Also analyzed is the subject of altitude profiles, a way to tailor the gravity tractor performance, and to achieve a steering ability within the B-plane. A novel analytical solution for the classic gravity tractor is derived. It removes the simulation need for classic tractor designs to obtain comparable two body model Δv$\mathrm{\Delta }v$ figures. This paper corroborates that the asteroid shape can be exploited for maximum performance. Even a single engine tilt adjustment at the beginning of deflection operations yields more deflection than a fixed preset tilt.     

EVA safety design guidelines

An Extravehicular Mobility Unit is a closed and isolated environment that protects the astronaut from exposure to space environment. Eighty-four percent of the possible hardware failures occurring during Extravehicular Activity (EVA) would result in an abort of the EVA. Fifty-two percent of these failure modes would result in a loss of a critical life support function and directly compromise crew safety. Crew safety is not, however, limited to controlling hardware failures. Safety can be compromised by improper in-flight servicing or induced by interfacing equipment during EVA related activity. This paper addresses these potential hazard sources and approaches used to enhance equipment reliability and astronaut safety.     

Equilibrium attitude and stability of a spacecraft on a stationary orbit around an asteroid

The stationary orbits around an asteroid, if exist, can be used for communication and navigation purposes just as around the Earth. The equilibrium attitude and stability of a rigid spacecraft on a stationary orbit around a uniformly-rotating asteroid are studied. The linearized equations of attitude motion are obtained under the small motion assumption. Then, the equilibrium attitude is determined in both cases of a general and a symmetrical spacecraft. Due to the higher-order inertia integrals of the spacecraft, the equilibrium attitude is slightly away from zero Euler angles. Then necessary conditions of stability of this conservative system are analyzed based on the linearized equations of motion. The effects of different parameters, including the harmonic coefficients C₂₀ and C₂₂ of the asteroid and higher-order inertia integrals of the spacecraft, on the stability are assessed and compared. Due to the significantly non-spherical shape and rapid rotation of the asteroid, the effects of the harmonic coefficients C₂₀ and C₂₂ are very significant, while effects of the third- and fourth-order inertia integrals of the spacecraft can be neglected. Considering a spacecraft on a stationary orbit around an example asteroid, we show that the classical stability domain predicted by the Beletskii–DeBra–Delp method on a circular orbit in a central gravity field is modified due to the non-spherical mass distribution of the asteroid. Our results are confirmed by a numerical simulation.     

Cassini Saturn-escape trajectories to Jupiter,Uranus, and Neptune

Potential encore-mission scenarios have been considered for the Cassini mission. In this paper we discuss one of the end-of-life scenarios in which the Cassini spacecraft could perform a Saturn escape via gravity assists from Titan. It is shown that such satellite-aided escape requires a small deterministic maneuver (e.g., Δv<50 m/s), but provides enough energy for the Cassini spacecraft to reach a range of targets in our Solar System, as close to the Sun as the asteroid belt or as far as the Kuiper belt. The escape sequence could be initiated from an arbitrary point during the on-going Cassini mission. Example tours are presented in which the final Titan flyby places the spacecraft into ballistic trajectories that reach Jupiter, Uranus, and Neptune. After years of heliocentric flight, the spacecraft could impact on the target gas giant or perform a flyby to escape from the Solar System (if not to another destination). The concept can be generalized to a new kind of missions, including nested-grand tours, which may involve satellite-aided captures and escapes at more than one planet.     

PANIC – A surface science package for the in situ characterization of a near-Earth asteroid

This paper presents the results of a mission concept study for an autonomous micro-scale surface lander also referred to as PANIC – the Pico Autonomous Near-Earth Asteroid In Situ Characterizer. The lander is based on the shape of a regular tetrahedron with an edge length of 35 cm, has a total mass of approximately 12 kg and utilizes hopping as a locomotion mechanism in microgravity. PANIC houses four scientific instruments in its proposed baseline configuration which enable the in situ characterization of an asteroid. It is carried by an interplanetary probe to its target and released to the surface after rendezvous. Detailed estimates of all critical subsystem parameters were derived to demonstrate the feasibility of this concept. The study illustrates that a small, simple landing element is a viable alternative to complex traditional lander concepts, adding a significant science return to any near-Earth asteroid (NEA) mission while meeting tight mass budget constraints.     

利用载人航天器进行热控涂层舱外搭载试验研究

为了解空间环境对热控涂层性能的影响,文章设计了舱外热控涂层搭载试验方案,包括试验件配置、在轨试验和回收方法。试验件在轨试验期间安放在载人航天器密封舱前舱门外,暴露于空间环境中;在实现对接、建立组合体后,航天员不需太空行走即可实施对搭载试验件的回收及再次安装等操作。该方案若成功应用并回收试验件至地面,我国将首次获得热控涂层空间飞行试验数据。     

一种提升近地小行星防御中拦截效率的方法

利用核爆直接炸毁小行星或改变小行星的轨道以避免其与地球相撞,是近地小行星防御最主要的手段之一。文章基于美国爱荷华州立大学的超高速小行星拦截器(HAIV)概念,提出一种将原撞击引导器改为长杆撞击器的方案,采用自主研发的欧拉型冲击动力学仿真软件NTS模拟长杆撞击器对小行星连续开坑的过程,并在仿真中加入能量源以模拟核爆装置在不同深度爆炸对小行星产生的偏转与破坏效应。研究结果表明,采用长杆撞击器并合理控制撞击速度,能够引导核爆装置进入更深的地下爆炸,从而更加高效地耦合核爆能量,提升偏转小行星或直接摧毁小行星的能力。     

超导核磁共振技术在航天员生命保障中的应用前景探究

长期空间飞行会对航天员的身心健康造成一定的不利影响,开展航天员生命保障的研究是非常必要的。核磁共振技术是疾病检查诊断的重要手段,同样在航天员生命保障医疗中将发挥重要的作用。文章结合国内外相关研究进展以及航天员选拔、训练和航天员医监医保的相关知识,探究了超导核磁共振技术在航天员生命保障中的应用前景。     

气动-引力辅助转移轨道研究及在星际探测中的应用

借力飞行是减小星际探测任务发射能量和总的速度增量的有效途径,然而,借力飞行前后,探测器速度矢量转角的变化往往受到借力星体体积、质量等因素的影响,而不能达到理想的要求。若在借力飞行中引入气动辅助变轨,即气动-引力辅助转移(AGA),则这一问题可以得到有效解决。现通过对AGA转移轨道的分析,给出了AGA转移轨道设计的拼接条件,此拼接条件是对AGA转移轨道进行设计和分析的重要准则。同时还以探测Ivar小行星为例,提出了一种将绘制等高线图和圆锥曲线拼接相结合的设计AGA转移轨道的方法,并给出了设计探测Ivar小行星转移轨道的参数。数值计算表明:AGA转移方法不但可以降低远程星际探测任务的发射能量和总的速度增量,而且可以找到更多的探测机会。