Application of Road Information in Ground Moving Target Tracking

A new algorithm is developed to achieve accurate state estimation in ground moving target tracking by means of using road information. It is an adaptive variable structure interacting multiple model estimator with dynamic models modification （DMM VS-IMM for short）. Firstly, road information is employed to modify the target dynamic models used by filter, including modification of state transition matrix and process noise. Secondly, road information is applied to update the model set of a VS-IMM estimator. Predicted state estimation and road information are used to locate the target in the road network on which the model set is updated and finally IMM filtering is implemented. As compared with traditional methods, the accuracy of state estimation is improved for target moving not only on a single road, but also through an intersection. Monte Carlo simulation demonstrates the efficiency and robustness of the proposed algorithm with moderate computational loads.     

Precision large scale air traffic surveillance using IMM/assignmentestimators

We present the development and implementation of a multisensor-multitarget tracking algorithm for large scale air traffic surveillance based on interacting multiple model (IMM) state estimation combined with a 2-dimensional assignment for data association. The algorithm can be used to track a large number of targets from measurements obtained with a large number of radars. The use of the algorithm is illustrated on measurements obtained from 5 FAA radars, which are asynchronous, heterogeneous, and geographically distributed over a large area. Both secondary radar data (beacon returns from cooperative targets) as well as primary radar data (skin returns from noncooperative targets) are used. The target IDs from the beacon returns are not used in the data association. The surveillance region includes about 800 targets that exhibit different types of motion. The performance of an IMM estimator with linear motion models is compared with that of the Kalman filter (KF). A number of performance measures that can be used on real data without knowledge of the ground truth are presented for this purpose. It is shown that the IMM estimator performs better than the KF. The advantage of fusing multisensor data is quantified. It is also shown that the computational requirements in the multisensor case are lower than in single sensor case, Finally, an IMM estimator with a nonlinear motion model (coordinated turn) is shown to further improve the performance during the maneuvering periods over the IMM with linear models     

Track segment association, fine-step IMM and initialization with Doppler for improved track performance

In this work we present a new track segment association technique to improve track continuity in large-scale target tracking problems where track breakages are common. A representative airborne early warning (AEW) system scenario, which is a challenging environment due to highly maneuvering targets, close target formations, large measurement errors, long sampling intervals, and low detection probabilities, provides the motivation for the new technique. Previously, a tracker using the interacting multiple model (IMM) estimator combined with an assignment algorithm was shown to be more reliable than a conventional Kalman filter based approach in tracking similar targets but it still yielded track breakages due to the difficult environment. In order to combine the broken track segments and improve track continuity, a new track segment association algorithm using a discrete optimization approach is presented. Simulation results show that track segment association yields significant improvements in mean track life as well as in position, speed, and course rms errors. Also presented is a modified one-point initialization technique with range rate measurements, which are typically ignored by other initialization techniques, and a fine-step IMM estimator, which improves performance in the presence of long revisit intervals. Another aspect that is investigated is the benefit of "deep" (multiframe or N-dimensional, with N > 2) association, which is shown to yield significant benefit in reducing the number of false tracks.     

New assignment-based data association for tracking move-stop-move targets

We present a new assignment-based algorithm for data association in tracking ground targets employing evasive move-stop-move maneuvers using ground moving target indicator (GMTI) reports obtained from an airborne sensor. To avoid detection by the GMTI sensor, the targets deliberately stop for some time before moving again. The sensor does not detect a target when the latter's radial velocity (along the line-of-sight from the sensor) falls below a certain minimum detectable velocity (MDV). Even in the absence of move-stop-move maneuvers, the detection has a less-than-unity probability (P/sub D/<1) due to obscuration and thresholding. Then, it is of interest, when a target is not detected, to develop a systematic technique that can distinguish between lack of detection due to P/sub D/<1 and lack of detection due to a stop (or a near stop). Previously, this problem was solved using a variable structure interacting multiple model (VS-IMM) estimator with a stopped target model (VS-IMM-ST) without explicitly addressing data association. We develop a novel "two-dummy" assignment approach for move-stop-move targets that considers both the problem of data association as well as filtering. Typically, in assignment-based data association a "dummy" measurement is used to denote the nondetection event. The use of the standard single-dummy assignment, which does not handle move-stop-move motion explicitly, can result in broken tracks. The new algorithm proposed here handles the evasive move-stop-move motion by introducing a second dummy measurement to represent nondetection due to the MDV. We also present a likelihood-ratio-based track deletion scheme for move-stop-move targets. Using this two-dummy data association algorithm, the track corresponding to a move-stop-move target is kept "alive' during missed detections both due to MDV and due to P/sub D/<1. In addition, one can obtain reductions in both rms estimation errors as well as the total number of track breakages.     

IMM estimator with out-of-sequence measurements

In multisensor tracking systems that operate in a centralized information processing architecture, measurements from the same target obtained by different sensors can arrive at the processing center out of sequence. In order to avoid either a delay in the output or the need for reordering and reprocessing an entire sequence of measurements, such measurements have to be processed as out-of-sequence measurements (OOSMs). Recent work developed procedures for incorporating OOSMs into a Kalman filter (KF). Since the state of the art tracker for real (maneuvering) targets is the interacting multiple model (IMM) estimator, the algorithm for incorporating OOSMs into an IMM estimator is presented here. Both data association and estimation are considered. Simulation results are presented for two realistic problems using measurements from two airborne GMTI sensors. It is shown that the proposed algorithm for incorporating OOSMs into an IMM estimator yields practically the same performance as the reordering and in-sequence reprocessing of the measurements. Also, it is shown how the range rate from a GMTI sensor can be used as a linear velocity measurement in the tracking filter.     

Bearings-only tracking of maneuvering targets using abatch-recursive estimator

We present a new batch-recursive estimator for tracking maneuvering targets from bearings-only measurements in clutter (i.e., for low signal-to-noise ratio (SNR) targets), Standard recursive estimators like the extended Kalman Iter (EKF) suffer from poor convergence and erratic behavior due to the lack of initial target range information, On the other hand, batch estimators cannot handle target maneuvers. In order to rectify these shortcomings, we combine the batch maximum likelihood-probabilistic data association (ML-PDA) estimator with the recursive interacting multiple model (IMM) estimator with probabilistic data association (PDA) to result in better track initialization as well as track maintenance results in the presence of clutter. It is also demonstrated how the batch-recursive estimator can be used for adaptive decisions for ownship maneuvers based on the target state estimation to enhance the target observability. The tracking algorithm is shown to be effective for targets with 8 dB SNR     

Road-map assisted ground moving target tracking

Tracking ground targets with airborne GMTI (ground moving target indicator) sensor measurements proves to be a challenging task due to high target density, high clutter, and low visibility. The exploitation of nonstandard background information such as road maps and terrain information is therefore highly desirable for the enhancement of track quality and track continuity. The present paper presents a Bayesian approach to incorporate such information consistently. It is particularly suited to deal with winding roads and networks of roads. The target dynamics is modeled in quasi one-dimensional road coordinates and mapped onto ground coordinates using linear road segments taking road map errors into account. The case of several intersecting roads with different characteristics, such as mean curvature, slope, or visibility, is treated within an interacting multiple model (IMM) scheme. Targets can be masked both by the clutter notch of the sensor and by terrain obstacles. Both effects are modeled using a sensor-target state dependent detection probability. The iterative filter equations are formulated within a framework of Gaussian sum approximations on the one hand and a particle filter approach on the other hand. Simulation results for single targets taken from a realistic ground scenario show strongly reduced target location errors compared with the case of neglecting road-map information. By modeling the clutter notch of the GMTI sensor, early detection of stopping targets is demonstrated     

Use of map information for tracking targets on airport surface

A generic and novel approach for integrating airport map information with sensor measurements in the track estimation process is proposed and evaluated. The surface restrictions imposed by the network of roads, taxiways, and runways, represented by a simplified geometric model, are included in both the target observation and the dynamic models, to derive the target state estimates. The performance of the methods proposed is illustrated in representative airport surface scenarios, taking as a reference for comparison other tracking alternatives such as VS-IMM (variable structure interacting multiple model estimator) ground target tracking, or standard ones that do not make use of ground information.     

Reduced state estimators for consistent tracking of maneuvering targets

Linear Kalman filters, using fewer states than required to completely specify target maneuvers, are commonly used to track maneuvering targets. Such reduced state Kalman filters have also been used as component filters of interacting multiple model (IMM) estimators. These reduced state Kalman filters rely on white plant noise to compensate for not knowing the maneuver - they are not necessarily optimal reduced state estimators nor are they necessarily consistent. To be consistent, the state estimation and innovation covariances must include the actual errors during a maneuver. Blair and Bar-Shalom have shown an example where a linear Kalman filter used as an inconsistent reduced state estimator paradoxically yields worse errors with multisensor tracking than with single sensor tracking. We provide examples showing multiple facets of Kalman filter and IMM inconsistency when tracking maneuvering targets with single and multiple sensors. An optimal reduced state estimator derived in previous work resolves the consistency issues of linear Kalman filters and IMM estimators.     

Interacting multiple model methods in target tracking: a survey

The Interacting Multiple Model (IMM) estimator is a suboptimal hybrid filter that has been shown to be one of the most cost-effective hybrid state estimation schemes. The main feature of this algorithm is its ability to estimate the state of a dynamic system with several behavior modes which can “switch” from one to another. In particular, the IMM estimator can be a self-adjusting variable-bandwidth filter, which makes it natural for tracking maneuvering targets. The importance of this approach is that it is the best compromise available currently-between complexity and performance: its computational requirements are nearly linear in the size of the problem (number of models) while its performance is almost the same as that of an algorithm with quadratic complexity. The objective of this work is to survey and put in perspective the existing IMM methods for target tracking problems. Special attention is given to the assumptions underlying each algorithm and its applicability to various situations     

Multiple ground target tracking

For current GMTI trackers, one of the most common contextual information used is road network information. In this paper, we present our approach using the road network information in tracking ground targets and in solving some ambiguities that can arise at road intersections or following a target manoeuvre leaving the road. For this we examine the performances of an adapted algorithm for tracking manoeuvring ground targets on road and off road in a cluttered environment using the map information.     

Multiple-Model Probability Hypothesis Density Filter for Tracking Maneuvering Targets

Tracking multiple targets with uncertain target dynamics is a difficult problem, especially with nonlinear state and/or measurement equations. With multiple targets, representing the full posterior distribution over target states is not practical. The problem becomes even more complicated when the number of targets varies, in which case the dimensionality of the state space itself becomes a discrete random variable. The probability hypothesis density (PHD) filter, which propagates only the first-order statistical moment (the PHD) of the full target posterior, has been shown to be a computationally efficient solution to multitarget tracking problems with a varying number of targets. The integral of PHD in any region of the state space gives the expected number of targets in that region. With maneuvering targets, detecting and tracking the changes in the target motion model also become important. The target dynamic model uncertainty can be resolved by assuming multiple models for possible motion modes and then combining the mode-dependent estimates in a manner similar to the one used in the interacting multiple model (IMM) estimator. This paper propose a multiple-model implementation of the PHD filter, which approximates the PHD by a set of weighted random samples propagated over time using sequential Monte Carlo (SMC) methods. The resulting filter can handle nonlinear, non-Gaussian dynamics with uncertain model parameters in multisensor-multitarget tracking scenarios. Simulation results are presented to show the effectiveness of the proposed filter over single-model PHD filters.     

Interacting acceleration compensation algorithm for trackingmaneuvering targets

The two-stage Kalman estimator has been studied for state estimation in the presence of random bias and applied to the tracking of maneuvering targets by treating the target acceleration as a bias vector. Since the target acceleration is considered a bias, the first stage contains a constant velocity motion model and estimates the target position and velocity, while the second stage estimates the target acceleration when a maneuver is detected, the acceleration estimate is used to correct the estimates of the first stage. The interacting acceleration compensation (IAC) algorithm is proposed to overcome the requirement of explicit maneuver detection of the two-stage estimator. The IAC algorithm is viewed as a two-stage estimator having two acceleration models: the zero acceleration of the constant velocity model and a constant acceleration model. The interacting multiple model (IMM) algorithm is used to compute the acceleration estimates that compensate the estimate of the constant velocity filter. Simulation results indicate the tracking performance of the IAC algorithm approaches that of a comparative IMM algorithm while requiring approximately 50% of the computations     

Tracking of multiple maneuvering targets using multiscan JPDA and IMM filtering

The paper considers the problem of tracking multiple maneuvering targets in the presence of clutter using switching multiple target motion models. A novel suboptimal filtering algorithm is developed by applying the basic interacting multiple model (IMM) approach and the joint probabilistic data association (JPDA) technique. Unlike the standard single-scan JPDA approach, the authors exploit a multiscan joint probabilistic data association (mscan-JPDA) approach to solve the data association problem. The algorithm is illustrated via a simulation example involving tracking of four maneuvering targets and a multiscan data window of length two     

Application of the Kalman-Levy Filter for Tracking Maneuvering Targets

Among target tracking algorithms using Kalman filtering-like approaches, the standard assumptions are Gaussian process and measurement noise models. Based on these assumptions, the Kalman filter is widely used in single or multiple filter versions (e.g., in an interacting multiple model (IMM) estimator). The oversimplification resulting from the above assumptions can cause degradation in tracking performance. In this paper we explore the application of Kalman-Levy filter to handle maneuvering targets. This filter assumes a heavy-tailed noise distribution known as the Levy distribution. Due to the heavy-tailed nature of the assumed distribution, the Kalman-Levy filter is more effective in the presence of large errors that can occur, for example, due to the onset of acceleration or deceleration. However, for the same reason, the performance of the Kalman-Levy filter in the nonmaneuvering portion of track is worse than that of a Kalman filter. For this reason, an IMM with one Kalman and one Kalman-Levy module is developed here. Also, the superiority of the IMM with Kalman-Levy module over only Kalman-filter-based IMM for realistic maneuvers is shown by simulation results.     

Integrated active fault-tolerant control using IMM approach

An integrated fault detection, diagnosis, and reconfigurable control scheme based on interacting multiple model (IMM) approach is proposed. Fault detection and diagnosis (FDD) is carried out using an IMM estimator. An eigenstructure assignment (EA) technique is used for reconfigurable feedback control law design. To achieve steady-state tracking, reconfigurable feedforward controllers are also synthesized using input weighting approach. The developed scheme can deal with not only actuator and sensor faults, but also failures in, system components. To achieve fast and reliable fault detection, diagnosis, and controller reconfiguration, new fault diagnosis and controller reconfiguration mechanisms have been developed by a suitable combination of the information provided by the mode probabilities from the IMM algorithm and an index related to the closed-loop system performance. The proposed approach is evaluated using an aircraft example, and excellent results have been obtained     

IMMPDAF for radar management and tracking benchmark with ECM

A framework is presented for controlling a phased array radar for tracking highly maneuvering targets in the presence of false alarms (FAs) and electronic countermeasures (ECMs). Algorithms are presented for track formation and maintenance; adaptive selection of target revisit interval, waveform and detection threshold; and neutralizing techniques for ECM, namely, against a standoff jammer (SOJ) and range gate pull off (RGPO). The interacting multiple model (IMM) estimator in combination with the probabilistic data association (PDA) technique is used for tracking. A constant false alarm rate (CFAR) approach is used to adaptively select the detection threshold and radar waveform, countering the effect of jammer-induced false measurements. The revisit interval is selected adaptively, based on the predicted angular innovation standard deviations. This tracker/radar-resource-allocator provides a complete solution to the benchmark problem for target tracking and radar control. Simulation results show an average sampling interval of about 2.5 s while maintaining a track loss less than the maximum allowed 4%     

ALGORITHMS FOR TRACKING MANEUVERING TARGET WITH PHASED ARRAY RADAR

Ｓｉｎｃｅｐｈａｓｅｄａｒａｙｒａｄａｒｃａｎａｌｏｃａｔｅｔｈｅｒａｄａｒｒｅｓｏｕｒｃｅｓｆｌｅｘｉｂｌｙ，ｉｔｈａｓｔｈｅｐｏｔｅｎｔｉａｌｔｏｆｕｒｔｈｅｒｉｍｐｒｏｖｅｔｈｅｐｅｒｆｏｒｍａｎｃｅｏｆｔｒａｃｋｉｎｇｍａｎｅｕｖｅｒｉｎｇｔ...     

Airborne GMTI radar position bias estimation using static-rotatortargets of opportunity

In target tracking systems: using GMTI (ground moving target indicator) radars on airborne platforms, the locations of these platforms are available from GPS-based estimates. However, these estimated locations are subject to errors that are, typically, stationary autocorrelated random processes, i.e., slowly varying biases. In situations where there are no known-location targets to estimate these biases, the next best recourse is to use targets of opportunity at fixed but unknown locations. Such targets can be, e.g., static rotators (ground-based radars with rotating antenna), which yield detections in moving target indicator (MTI) radars. It is shown that these biases can be estimated in such a scenario, i.e., they meet the complete observability condition. Following this, the achievable accuracy for a generic scenario is evaluated. It is shown that accurate georegistration can be obtained even with a small number of measurements     

Radar Measurement Noise Variance Estimation with Several Targets of Opportunity

A number of methods exist to track a target's uncertain motion through space using inherently inaccurate sensor measurements. A powerful method of adaptive estimation is the interacting multiple model (IMM) estimator. In order to carry out state estimation from the noisy measurements of a sensor, however, the filter should have knowledge of the statistical characteristics of the noise associated with that sensor. The statistical characteristics (accuracies) of real sensors, however, are not always available, in particular for legacy sensors. A method is presented of determining the measurement noise variances of a sensor, assumed to be constant, by using multiple IMM estimators while tracking targets whose motion is not known---targets of opportunity. Combining techniques outlined in [2] and [6], the likelihood functions are obtained for a number of IMM estimators, each with different assumptions on the measurement noise variances. Then a search is carried out over a varying grid of IMMs to bracket the variances of the sensor measurement noises. The end result consists of estimates of the measurement noise variances of the sensor in question.