共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
拦截高超声速目标的异类导弹协同制导律 总被引:9,自引:3,他引:9
对于多导弹协同拦截高超声速目标的问题,设计了一种具有领弹-从弹拓扑结构的异类导弹协同制导律:配备有高性能导引头的领弹采用改进比例导引法拦截目标;未配备导引头的从弹利用通信手段,采用二阶一致性跟踪算法,对领弹进行跟踪。两类导弹同时命中目标,形成"多对一"的拦截态势。异构型的制导策略可以降低对导引设备的需求,具备较理想的作战效费比。领弹与从弹的弹道均源于改进比例导引法,具有较理想的弹道特性。给出了协同制导律在固定拓扑与切换拓扑下成立的充分条件。算例仿真验证了所提出的制导律能够实现对高超声速目标的协同拦截,具有良好的可行性。 相似文献
3.
4.
基于纯比例导引的拦截碰撞角约束制导策略 总被引:1,自引:0,他引:1
拦截碰撞角约束制导是当前导弹制导研究的关键问题之一。首先基于理想比例导引(IPN)律拦截非机动目标的解析解,推导了纯比例导引律(PPN)拦截固定目标的解析解,得到了弹目相对距离、制导指令加速度和导弹前置角的显示表达式,并进一步得到了拦截碰撞角与弹目相对运动状态和比例导引系数之间的解析表达式。其次,基于该解析表达式,提出了基于PPN的拦截碰撞角约束制导策略(PPNIACG),并探讨了在铅垂面内进行落角约束打击和水平面内进行拦截碰撞角约束打击的2种实现方式。最后,以弹道成型制导律(TSG)和最优碰撞角约束制导律(OIACG)为参考,通过数值仿真算例,对PPNIAC的拦截性能进行了对比分析,验证了所提出制导策略的有效性和正确性。 相似文献
5.
针对临近空间高超声速飞行器的高速性、机动性等特性,为提高制导算法针对不同初始状态、不同机动性目标的准确性、鲁棒性及智能性,提出一种基于信赖域策略优化(TRPO)算法的深度强化学习制导算法。基于TRPO算法的制导算法由2个策略(动作)网络、1个评价网络共同组成,将临近空间目标与拦截弹相对运动系统状态以端对端的方式直接映射为制导指令。在算法训练过程中合理选取连续动作空间、状态空间、并通过权衡能量消耗、相对距离等因素构建奖励函数加快其收敛速度,最终依据训练的智能体模型针对不同任务场景进行拦截测试。仿真结果表明:与传统比例导引律(PN)及改进比例导引律(IPN)相比,本文算法针对学习场景及未知场景均具有更小的脱靶量、更稳定的拦截效果、鲁棒性,并能够在多种配置计算机上广泛应用。 相似文献
6.
分析了目前高超声速飞行器的发展现状和发展趋势,指出高超武器已经给现有的防空反导武器系统带来极大威胁和挑战。针对高超声速飞行器的拦截问题,分析梳理了相关的技术难点。为保证拦截成功,采用多枚拦截器编队拦截高超声速目标是目前高效可行的技术途径,而多临近空间拦截器自主协同制导控制技术则是关键技术。针对多临近空间拦截器编队攻击自主协同制导控制技术,分别从建模、决策规划、感知、制导、控制以及评估6个方面提出需要解决的关键技术问题。最后对多临近空间拦截器编队拦截自主协同制导控制技术进行了总结与展望。 相似文献
7.
8.
基于一般弹目平面运动模型,以视线角、视线角速率为状态变量将弹目运动关系转换为二阶控制系统状态空间表达,把制导律设计转化为系统控制律的设计问题.在此控制模型的基础之上,利用Lyapunov稳定性定理,以视线角速率平方项作为能量函数设计了一种新型的扩展比例导引律,与其他扩展比例导引律相比,该导引律不需要增加任何制导观测信息,可以有效抑制噪声影响,并将基于Lyapunov稳定性的末制导律设计方法推广到有终端角约束的制导律设计中.仿真结果比较表明,该制导律可以提高制导精度、有效减小制导信息中的噪声影响. 相似文献
9.
10.
垂直攻击型武器末制导系统设计与分析 总被引:1,自引:0,他引:1
介绍了垂直攻击型武器末制导段的特点,分析了其制导控制系统的特殊要求。针对常规控制方案的不足,提出侧力板控制方案,推导出一种考虑速度变化的变系数比例导引律,并结合某型号飞行器进行了仿真。结果证明,侧力板控制与变系数导引律明显优于常规控制和常系数比例导引律,完全可以满足垂直攻击型武器在末制导段的要求,该项研究为型号设计提供了具有实际参考价值的结论。 相似文献
11.
有翼高超声速再入飞行器气动设计难点问题 总被引:2,自引:1,他引:2
有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。 相似文献
12.
LUO Cheng LIU Hua YANG Jia-ling LIU Kai-xin 《中国航空学报》2007,20(3):230-235
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks. 相似文献
13.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
14.
15.
波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面:电子化(e-Enabled)运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境(GCE)。 相似文献
16.
临近空间飞行器测控与信息传输系统频段选择 总被引:7,自引:0,他引:7
临近空间飞行器是高性能信息化武器平台,测控(TT&;C)与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联(ITU)国际标准、高速数传、接收信噪比(SNR)、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。 相似文献
17.
基于弯曲激波压缩系统的高超声速进气道反设计研究进展 总被引:3,自引:0,他引:3
总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。 相似文献
18.
Integrated Entry Guidance for Reusable Launch Vehicle 总被引:2,自引:2,他引:0
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
19.
Wu Xianyu Li Xiaoshan Ding Meng Liu Weidong Wang Zhenguo 《中国航空学报》2007,20(6):488-494
In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances. 相似文献
20.
(高)超声速流动试验技术及研究进展 总被引:1,自引:1,他引:1
近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。 相似文献