用于飞行器隐身的闭式等离子体厚度选择分析

为分析闭式等离子体用于飞行器隐身的可行性,引入了可观隐身效果的概念及对应的闭式等离子体厚度。采用WKB方法,详细研究了X波段下的闭式等离子体吸波效果,得到了对应频段下产生可观隐身效果需要的等离子体厚度;研究了不同电子密度分布的吸波特性,数值算例说明,对不同电子密度分布的等离子体,吸波效果与厚度均成线性关系,同时,采用理论推导验证了该现象的正确性。结果表明,对于给定的电磁波,采用一定厚度的闭式等离子体可以达到可观隐身效果。     

用于飞行器的强电离放电非平衡等离子体隐身方法研究

着重研究了等离子体临界电子密度、电子等离子体频率等参数对电磁波的折射、吸收、反射的影响。在此基础上,采用了强电场电离放电方法,在放电间隙内产生高密度、高能量的电子,它足以电离氮、氧等气体,在飞行器表面形成具有一定梯度的高密度等离子体层,能够吸收、折射电磁波,衰减雷达散射面积达千余倍。该等离子体器件是一个很薄的组合件,仅有百余克重,可贴附在电磁波强散射部位和进气道壁上。此方法具有吸收频带宽、吸收率高等特点,有望成为机载微型等离子体产生器件。     

温度、密度对目标等离子体隐身效果影响的FDTD分析

采用等温近似,给出覆盖目标的不均匀的、各项同性的、热的、碰撞的、等离子体的电磁反射的三维FDTD算法的公式。在一维条件下,计算了不同密度分布、不同温度的等离子体对电磁波的反射系数。给出了温度、密度对电磁波在等离子体中的碰撞吸收的影响。结果显示,增大等离子体的温度和密度将有利于等离子体对电磁波的吸收,增大吸收的带宽,减小等离子体覆盖目标对电磁波的反射。     

天线窗材料热透波特性风洞测试方法

高超声速飞行器天线窗材料在等离子体包覆条件下的热响应和热透波特性测试,是分析天线窗材料特性、研究电磁波在等离子体和天线窗中传输特性的基础。针对等离子体和天线窗中电磁波传输特性,采用矢量网络分析仪和标准增益天线组成的电磁波传输测试系统,获得了一定频率的电磁波经过等离子体和高温天线窗之后的衰减;针对高温天线窗自身热响应特性和电磁波在其中的传输特性,研究了天线窗材料在一定热流作用下的温度分布和烧蚀特性,测试了烧蚀后处于高温状态且无等离子体覆盖的天线窗对电磁波的影响,分析了天线窗高温透波特性与常温透波特性的差异。所建立的方法,为在地面等离子体风洞中开展天线窗热透波特性研究、分析天线窗和等离子体耦合作用对电磁波传输特性的影响建立了基础。     

新型等离子体电扫描八木天线的关键技术研究

提出了一种新型等离子体电扫描八木天线,研究了基于等离子体的电扫描八木天线的关键技术。通过对等离子体半波振子的仿真,研究了等离子体半波振子天线的辐射性能、隐身性能和等离子体对电磁波的反射和吸收作用。通过实验测试了等离子体中电子密度,制作了一款等离子体电扫描八木天线原理样机．并进行了测试。     

飞行器目标频率响应散射特性

为研究飞行器目标散射频率响应特性和隐身、反隐身原理,对两种飞行器平板缩比模型进行了系列测试和计算研究,推导和验证了简单目标（金属球）的频率响应特性在飞行器目标上的适用性,并推广到如飞行器复杂散射体的分析。提出了划分瑞利区、谐振区、高频区的新方法,指出飞行器具有隐身能力极限的概念;研究了目标多频散射的极化特性,发现频率降低时,水平极化下全向雷达散射截面（RCS)均值逐渐增大,垂直极化时减小。得到了两种飞行器目标处于瑞利区、谐振区时依靠外形隐身所能达到的RCS极限值。结果分析表明,在瑞利区和谐振区,目前的外形隐身措施存在不能超越的极限,在这两个区域的雷达隐身需结合外形和材料隐身技术。     

隐身飞行器电磁散射特性分析

为对隐身飞行器的探测手段进行研究和指导隐身飞行器的研制,研究其电磁散射特性。采用外形逆向建模、理论预估和散射测量、强散射源减缩相结合的手段,对隐身飞行器的隐身性能进行预估。该方法具有精度高、速度快的优点,适合在隐身飞行器研制方案设计阶段使用。     

隐身飞行器电磁散射特性分析

为对隐身飞行器的探测手段进行研究,指导隐身飞行器的研制,研究其电磁散射特性,文中采用外形逆向建模、理论预估和散射测量、强散射源减缩相结合的手段,对隐身飞行器的隐身性能进行预估。该方法具有精度高、速度快的优点,适合在隐身飞行器研制方案设计阶段使用。     

高超声速半球绕流流场电磁散射特性分析

分析再入流场对飞行器再入通信及空间散射特性的影响,研究电磁波与再入等离子体作用机理.采用分段线性电流密度递归卷积时域有限差分方法计算导电金属半球高超声速绕流流场电磁散射特性,分析半球等离子体包覆绕流流场雷达散射截面(RCS)随入射电磁波频率、双站角、飞行马赫数和高度变化特性.计算表明,前向是全方位散射中RCS取得最大值的方向.马赫数Ma≤10时,马赫数及高度变化对半球高超声速绕流流场L,S波段后向RCS和双站RCS影响很小;在L,S波段,绕流流场及半球本体的后向和前向RCS差距较小.马赫数Ma=14,16时,过密等离子体鞘套的形成增大了本体投影面积,在L,S波段,绕流流场前向RCS比本体前向RCS大;绕流流场存在对半球本体双站散射特性影响很大.      

用改进MMN的MLFMA分析外形隐身的多频减缩特性(英文)

为精确高效计算多极子模式数(MMN),提出了3个控制因子,详细研究了控制因子对多层快速多极子算法(MLFMA)的积分采样点数和计算精度的影响;基于控制因子,提出一种改进措施,可在保证精度的前提下,显著提高计算效率、有效降低内存。对3种飞行器,采用改进的MLFMA,分析了多频散射特性,发现飞行器外形在不同频率区域均可影响雷达散射截面(RCS)。研究了外形隐身布局和考虑隐身的常规布局的RCS多频减缩规律,结果表明,外形隐身在谐振区和高频区具有较大的RCS减缩效果,在瑞利区仍具有较弱影响;与吸波相比,外形隐身可产生较广的多频RCS减缩。以上结果可用于飞行器在多频段或全频段的隐身设计。     

典型布局飞机电磁散射特性数值计算研究

电磁隐身对飞行器战场生存力具有重要影响,作战任务不同,对应的飞行器布局形式也不同,而飞行器布局形式会影响其电磁散射特性。建立四种典型布局形式和电磁模型,基于物理光学法,数值模拟不同布局飞行器的RCS曲线,并分析RCS分布特点;对常规和特殊布局模型,研究其电磁散射的频率响应特性。结果表明:飞机布局决定RCS分布形式,在前向角域内,布局A-1、A-2、B、C、D的电磁隐身性能呈震荡提高趋势,RCS均值从7.770 0dBsm震荡降低至-30.067 3dBsm,布局B的RCS均值为-10.434 7dBsm;而不同布局的后向和周向角域电磁隐身性能依次提高,后向RCS均值由常规布局的22.702 5dBsm缩减为-25.093 8dBsm,周向由7.039 1dBsm缩减为-15.137 3dBsm;在高频区域,频率增加对RCS曲线分布特点影响较小,但曲线震荡性更加明显,RCS算术均值降低。     

飞行器RCS近场测试技术研究进展与工程应用

雷达散射截面(RCS)测试是隐身技术和目标特性研究的基础。无论是研究物体的电磁散射特性还是研制具有突防能力的隐身武器系统,RCS测试都具有非常重要的意义。通过RCS测试可以验证电磁散射计算的理论和方法,更重要的是,对部分飞行器目标进行电磁散射理论计算非常困难,而通过测试可以直观地获得目标的电磁散射特性数据,从而避开复杂的电磁仿真计算。与外场、紧缩场RCS测试方法相比,近年来得到广泛应用与发展的RCS近场测试方法在飞行器目标的散射特性测试方面具有效率高、成本低的优势。介绍了飞行器RCS测试评估方法,综述了国内外RCS近场测试技术研究的最新进展与工程应用实例,分析展望了飞行器RCS近场测试技术面临的机遇与挑战。     

缝隙目标电磁散射特性试验

 通过对目标结构进行合理设计,可以在一定角域内显著减小雷达散射截面(RCS)。对飞行器表面常见锯齿缝隙的散射特性进行了研究。在微波暗室内对锯齿缝隙分别沿俯仰角变化、方位角变化的减缩效果进行测试。俯仰角变化时,锯齿缝隙有较好的减缩作用,以114°锯齿缝隙在试验中减缩效果最好。方位角变化时,对114°锯齿缝隙进行了多频段测试,并与相应直缝隙进行了对比研究,结果表明,通过选取合适的方位角角域,锯齿缝隙的减缩作用会随入射波频率的升高和仰角的增大而显著增强。结论可为高性能隐身飞行器外形隐身设计提供参考。     

等离子体隐身结构机翼的RCS分析

等离子体隐身是利用等离子体回避雷达探测系统的一种技术.本文介绍了飞机等离子体隐身的原理,提出了一种在飞机机翼封闭前缘内产生离子体的隐身结构设计方案,进而采用CST NWS高频电磁分析软件,对等离子体隐身结构机翼与金属机翼的RCS进行了分析、对比.研究表明,在前缘设置等离子体隐身结构可以改善机翼的总体雷达散射特性.     

Multi-frequency RCS Reduction Characteristics of Shape Stealth with MLFMA with Improved MMN

Three new control factors are presented for calculating the multipole mode number (MMN) efficiently and precisely. The effects of these control factors on the number of integral samples and the precision of multilevel fast multipole algorithm (MLFMA) are investigated. A new approach based on control factors which is proven to be able to improve the computational efficiency and reduce the needed memory significantly as well as ensuring the proper precision. For three aircraft models, the improved MLFMA is employed to analyze their multi-frequency scattering characteristics. It is found that aircraft shape can influence radar cross section (RCS) in different frequency zones. Both the multi-frequency RCS reduction characteristics of shape stealth aircraft and the conventional aircraft with stealth design taken into account are investigated, and the results show that shape stealth exhibits significant RCS reduction in the resonance and high-frequency zones, and with a weaker influence in the Rayleigh zone. Compared with radar absorbing material (RAM), shape stealth yields a wider multi-frequency RCS reduction. The above-mentioned results can be applied to stealth design for multiple frequencies or even for all frequencies.     

Influence of aircraft surface distribution on electromagnetic scattering characteristics

In this paper, two typical stealth aircraft concepts (wing fuselage blended and flying-wing) were designed. Then three gradually changed surface distribution models with the same plan-form for each concept were created. Based on the multilevel fast multipole algorithm (MLFMA), the vertical polarization transmitting/vertical polarization receiving (VV) and horizontal polariza-tion transmitting/horizontal polarization receiving (HH) radar cross section (RCS) characteristics were simulated with five frequencies between 0.1 and 1.0 GHz. The influences and mechanisms of aircraft surface distribution on electromagnetic scattering characteristics were investigated. The results show that for the wing fuselage blended concept, the VV RCS of this frequency range is higher than the HH RCS in most cases, while it is just the opposite for the flying-wing concept. As for the two aircraft concepts, the RCS levels of HH and VV both decrease with the frequency increasing, but the HH RCS has a faster downward trend. The surface distribution has little influ-ence on HH RCS characteristics. On the contrary, it has a significant impact on VV RCS charac-teristics, and the amplitude of the VV RCS increases with the surface thickness.     

A New Method for Analyzing Integrated Stealth Ability of Penetration Aircraft

Taking into account the limitations of existing stealth performance analysis methods, a method termed as the integrated stealth performance analysis method is proposed for evaluating the stealth ability of the penetration aircraft. Based on various target radar cross section (RCS) scattering characters, this article integrates the relevant parameters needed for building up target circumferential RCS scattering model and proposes the RCS scattering controlling parameters to control the changing trends of the relevant model RCS scattering characters. According to the radar dynamic detecting characters during the whole penetration course, a dynamic stealth performance evaluating model is proposed accompanied by a series of stealth ability estimation rules. This new analysis method can enhance the integrality and dependability of the stealth analysis conclusions and summarize the relationship between the target RCS scattering characters and their effects on stealth performance. The rules indicated by this relationship can be used as the reference for designing new type of stealth aircraft and setting up specific penetration tactics.     

Influence of stealth aircraft dynamic RCS peak on radar detection probability

For modern stealth aircraft, it is important to analyze the influence of Radar Cross Section (RCS) peak exposure on penetration for guiding stealth design and penetration trajectory planning, which needs to reflect the RCS statistical uncertainty and the RCS difference with the change of incident angle. Based on the RCS characteristics of typical stealth aircraft, this paper established a simplified RCS dynamic fluctuation statistical model with the parameters log mean and log standard deviation. According to the detection probability algorithm in radar signal processing field, this paper built the algorithm of radar detection probability based on the RCS dynamic fluctuation statistical model. The analysis of examples concluded that the key to successful penetration is to shorten the RCS peak exposure time, which can be reduced by decreasing the RCS peak width or increasing velocity. Based on the conclusion, this paper proposed the method of turning maneuvering to reduce RCS peak exposure time dramatically.     

隐身技术对飞机作战效能影响研究

采用较完善的飞机，火控和武器系统模型以及详实的数据，应用分布式仿真原理的可视化仿真平台，进行了隐身飞机对实规第三代战斗机作战效能的仿真研究以及常规第三代战斗机采用隐身技术降低RCS指标后对作战效能的影响研究，仿真结果表明，未来的隐身飞机较常规第三代战斗机在 超视距作战中具有相当大的优势，第三代战斗机采用隐身技术降低RCS指标后可以提高其超视距作战能力。     

座舱及进气道对某飞翼布局电磁散射影响

座舱和进气道对飞行器隐身性能有重要作用。为分析座舱及进气道的散射影响特性,建立了四种包含不同部件的电磁模型,结合物理光学法和雷达截面积(RCS)均值相对增值概念,研究了RCS曲线分布影响、俯仰角响应特性、频率响应特性。结果表明:考虑隐身设计的座舱和进气道不改变散射分布特性,RCS曲线分布特性相似;俯仰角增加,座舱影响较小,进气道、混合座舱和进气道前向、后向、周向角域相对增值震荡性递增,频率增加,座舱对电磁散射影响不大,进气道、混合座舱和进气道的前向、后向角域的相对增值震荡减小。座舱对电磁散射影响较小,前向相对增值位于-2.4～1 dB之间,进气道对电磁散射影响较大,前向相对增值为2～12 dB。