共查询到18条相似文献,搜索用时 636 毫秒
1.
2.
《载人航天》2015,(3)
长期载人航天中必须突破的关键技术是水和氧气的循环再生。微重力下,水和氧气的循环再生首要解决的问题是气液两相流的分离。空间动态水气分离器利用离心力原理实现气液分离,但由于地面无法长时间模拟微重力环境,因而无法评价动态水气分离器在失重条件下的工作性能。2010年3月利用法国NOVESPACE Airbus A300 ZERO-G失重飞机,对空间动态水气分离器的水气分离效果进行了研究。结果观察到抛物线飞行过程中,分离液体中的含气率变化总体效果与地面重力条件下一致;而分离气体中观察到可视液滴,与地面重力条件下无可视液滴的结果不同。说明空间动态水气分离器的工作性能受重力影响,地面评价方法还需进一步完善。2012年10月再次利用法国的失重飞机,对改进后的动态水气分离器进行了搭载试验,结果显示分离性能已满足要求,验证了改进方法的正确性。 相似文献
3.
4.
航空发动机飞行载荷谱的预测 总被引:2,自引:0,他引:2
提出了基于飞机的设计飞行任务剖面、飞行力学及发动机原理的发动机飞行载荷的预测方法,即首先将飞机的设计飞行任务剖面通过飞行力学的基本原理转化为发动机的推力(或油门)剖面,然后通过发动机性能计算获得发动机的其它工作状态参数,从而获得发动机的飞行载荷谱。 相似文献
5.
大型固定翼灭火飞机是应对森林火灾最有效的工具之一。首先针对中国缺少大型灭火飞机投水灭火飞行仿真系统的现状,基于水陆两栖灭火飞机投水灭火任务流程,对投汲水灭火仿真任务子系统、灭火飞机投汲水灭火仿真场景构建、投水数据处理与灭火效能评估方法进行了研究,设计和构建了一种水陆两栖飞机灭火飞行仿真系统,实现了大型灭火飞机投水灭火任务全流程飞行仿真。其次通过使用K-S检验方法对仿真飞行投水数据与真实飞行试验投水数据进行统计学检验,证实了本仿真系统具有较高的仿真真实度。最后还研究了在灭火飞行仿真中投水速度和投水高度对投水覆盖面积、投水均匀度和投水有效利用率3个灭火效能参数的影响,为灭火飞机指挥员进行投水方案的制订提供了支撑。本文成果对于提高灭火飞机飞行员培训效率,节省培训费用,节约灭火飞机飞行试验费用,缩短飞行试验的时间,加快中国森林航空消防力量建设具有参考意义。 相似文献
6.
民机飞行管理系统建模与仿真实现 总被引:2,自引:0,他引:2
飞行管理系统的建模与仿真在民机飞行模拟器的研制中具有重要意义。研究了飞行管理计算机系统(FMCS)的建模。FMCS的功能通过飞行管理计算机(FMC)和控制显示组件(CDU)实现。基于Visual C 编译环境开发了CDU操作界面,可进行数据输入与飞机状态监控。建立了FMC的导航数据库和性能数据库,规划了飞机水平飞行轨迹,完成了侧向飞行控制。最后基于飞行手册给出的飞行剖面数据设计了次优垂直轨迹。仿真结果表明,水平轨迹规划算法切实有效。 相似文献
7.
8.
吴双 《民用飞机设计与研究》2018,(3)
飞机液压系统的一个重要设计指标是能够满足全飞行剖面场景下的负载流量需求。介绍了一种用于飞机液压系统负载流量需求分析的数字仿真分析方法,通过开发数学模型构建了液压能源子系统和液压用户的负载子系统模型,进而仿真分析典型飞行剖面下液压系统的负载流量需求,模拟了飞机液压系统的动态工作过程,能够反映飞机液压系统与液压用户负载之间的耦合动态特性。仿真结果表明,这套模型满足液压系统分析需求,可用于液压系统的设计支持工作。 相似文献
9.
给出了航路飞行自动飞行仿真的总体框架,介绍了采用分段线性函数描述控制指令的机动指令生成器算法,对机动指令跟踪器的控制律结构进行了设计,并对其参数进行了整定与调整。采用飞机六自由度模型对航路飞行过程进行了自动飞行仿真。仿真结果表明,飞机能够较好地完成航路飞行仿真任务。 相似文献
10.
11.
一个新型的民用飞机要投入航线使用,必须经过适航合格取证试飞,获得型号合格证、生产许可证和适航证,具备三证才允许走向市场。民用飞机适航取证试飞项目有许多,其中负加速度试飞是民用飞机燃油系统适航取证试验的重要验证项目。民用飞机负加速度试飞在国内尚属首次,具有对机组操纵技术要求高、风险难度大的特点。结合某型民机燃油系统合格审定试飞,研究了民用飞机负加速度的试飞技术,提出了用抛物线试飞方法来完成负加速度试飞任务。主要介绍了负加速度试飞中可能出现问题、试飞前应准备的工作、试飞方法等,并对试验结果进行了分析。 相似文献
12.
Flight trajectory optimization of sun-tracking solar aircraft under the constraint of mission region
《中国航空学报》2021,34(11):140-153
The optimal yawing angle of sun-tracking solar aircraft is tightly related to the solar azimuth angle, which results in a large arc flight path to dynamically track the sun position. However, the limited detection range of payload usually requires solar aircraft to loiter over areas of interest for persistent surveillance missions. The large arc sun-tracking flight may cause the target area on the ground to be outside the maximum coverage area of payload. The present study therefore develops an optimal flight control approach for planning the flight path of sun-tracking solar aircraft within a mission region. The proposed method enables sun-tracking solar aircraft to maintain the optimal yawing angle most of the time during daylight flight, except when the aircraft reverses its direction by turning flight. For a circular region with a mission radius of 50 km, the optimal flight trajectory and controls of an example Λ-shaped sun-tracking solar aircraft are investigated theoretically. Results demonstrate the effectiveness of the proposed approach to optimize the flight path of the sun-tracking aircraft under the given circular region while maximizing the battery input power. Furthermore, the effects of varying the mission radius on energy performance are explored numerically. It has been proved that both net energy and energy balance remain nearly constant as the radius constraint varies, which enables the solar aircraft to achieve perpetual flight at almost the same latitude as the large arc flight. The method and results presented in this paper can provide reference for the persistent operation of sun-tracking solar aircraft within specific mission areas. 相似文献
13.
教练机发动机使用任务循环推导 总被引:2,自引:0,他引:2
在大量的外场统计和空测的基础上, 对某教练机发动机的外场使用载荷进行了分析研究, 推导出了其使用任务循环, 并与MIL-STD-1783进行了对比分析, 为国产同类新型教练机发动机的设计任务循环的预测奠定了基础。 相似文献
14.
教练机发动机设计载荷谱推导方法 总被引:1,自引:3,他引:1
系统地研究了教练机航空发动机设计载荷谱的推导方法,主要包括:(1)基准机的选取与现役发动机载荷谱的空测、统计;(2)新机发动机飞行剖面的预测;(3)新机发动机设计任务循环的编制等三大步骤。提出的方法具有一定的通用性,可以推广到其它类型的发动机设计载荷谱研究。 相似文献
15.
张大伟 《民用飞机设计与研究》2022,(2):111-114
中国商飞试飞中心,上海 201323) : 民机首飞空速校准问题直接影响首飞安全,得到了相关从业者的普遍重视,然而系统性的研究多局限于各公司内部。通过对首飞空速校准的意义进行总结,对拖锥法、伴飞法和GPS四边法等常见的首飞空速校准的方法进行系统性介绍,并基于实际工作经验给出了针对空速校准,在首飞准备、首飞任务设计、首飞安全保障以及首飞机组训练等方面的建议。此外,针对国内民机首飞的实际特点,提出了一种改进的GPS空速校准方法,给出了改进的GPS空速校准法的具体试飞方法、数据处理方法,对该方法的误差来源进行了分析,并将该方法与其他传统方法进行了对比。结果表明,该方法不需要专门的试飞动作和测试改装,可以节省宝贵的首飞时间,同时大大降低实施的难度,可供其它民机型号首飞工作参考。 相似文献
16.
Owing to the lack of a direct link with the operations in short-range air combat,conventional aircraft flying qualities criteria are inappropriate to guide the design of a task-tailored flight control law.By applying the mission-oriented flying qualities evaluation approach,various aircraft with different control law parameters are evaluated on a ground-based simulator.This paper compares the evaluation results with several conventional flying qualities criteria,and discusses the appropriate parameter combination to reflect the flying qualities requirements of short-range air combat,The comparison and analysis show that a short-range air combat mission requires a higher minimum short period mode natural frequency and a smaller maximum roll mode time constant,and allows a lower minimum pitch attitude bandwidth and a higher maximum short period mode damp ratio than those of conventional flying qualities criteria.Furthermore,a combination of the pitch attitude bandwidth,the pitch attitude magnitude at the bandwidth frequency,and the pitch attitude transfer function gain can define the flying qualities requirements of short-range air com bat.The new metric can successfully predict the flying quality levels of aircraft in a short-range air combat mission. 相似文献
17.