GIPS-1AM高精度惯性稳定平台式海空重力仪的设计与试验

针对国内对于高精度海空重力仪的迫切需求,自主研制了GIPS-1AM高精度惯性稳定平台式海空重力仪样机。突破了高精度重力敏感器设计、高精密温度控制、总体设计和自标定等关键技术问题,完成了样机的设计、调试和试验测试。试验测试结果表明,样机温控精度优于0.01℃,静态长时间工作稳定性、不同楼层重力测试精度均优于1mGal(1σ)。可满足大地测量学、地球物理学、地球动力学、海洋科学、资源勘探、空间科学以及现代军事等基础前沿领域的重力测量需求。     

惯导平台式重力测量技术实现及应用

详细阐述了解析方位双轴惯导平台式重力测量的工作原理,并通过基于方位余弦积的惯导力学编排解决了极区工作问题。在常规平台式重力测量数据处理方法的基础上,针对高动态环境提出了基于Kalman滤波的运动扰动修正方法。在此基础上研制了ZL11-1A型国产惯导平台式海洋重力仪。通过与国外主流重力仪产品海上同船作业比对,结果表明,该型重力仪在高海况下测量精度依然优于1mGal,满足重力测量作业要求。     

航空／海洋重力仪用加速度计现状与优化方法

采用石英挠性加速度计作为重力敏感器的航空/海洋重力仪是典型的重力信息采集仪器,要求石英挠性加速度计具有一次通电稳定性高、高分辨率、低噪声的特点。为了满足航空/海洋重力仪需求,首先,分析了石英挠性加速度计一次通电稳定性机理,确定了关键影响因素,并给出了优化方向;其次,建立了加速度计分辨率模型,给出了测试方法和后续优化方向;最后,通过试验确定了噪声水平,根据关键影响因素给出了优化方向。通过上述研究的开展,为石英挠性加速度计在重力测量领域中的应用奠定了基础。     

一种采用“捷联+平台”方案的新型航空重力仪

针对资源勘探等高精度应用对航空重力仪测量精度和分辨率的更高要求,在前期研究基础之上,研发了新一代采用"捷联+平台"方案的新型航空重力仪。设计了采用石英挠性加速度计和光纤陀螺的捷联式重力仪,采用了新型温度控制方案,提高了重力仪的环境适应能力。设计了稳定平台,将捷联式重力仪保持在垂直方向,隔离载机的角运动干扰,减小了重力传感器的动态误差。飞行试验表明,该方案是有效的,将航空重力仪的精度和分辨率提升到优于1mGal/3km。     

捷联式重力仪在海洋测量中的应用与数据处理

针对海洋重力测量对重力测量系统的要求,给出了一种捷联式海洋重力仪SAG-2M,论述了系统组成、工作原理、特点和数据处理流程。利用近期获得的某海域重力测量数据,评估了捷联式重力仪精度。测量结果表明,重复测线的重力异常曲线吻合度较高,交叉点不符值精度约为1.2mGal,满足海洋重力测量的指标要求。     

海空重力仪的技术现状及新应用

海洋/航空重力测量是基于移动平台的动态相对重力测量,是指用有人测量船或飞机搭载重力仪或加速度计,来测定海面或近地空中重力加速度的重力测量方法。介绍了重力仪的应用领域,针对移动海洋/航空重力仪、海空重力仪车载试验,综合阐述了其国外、国内发展现状,指出了无人重力测量技术和深远海动态重力测量技术亟待解决的问题,分析了我国在海空重力测量领域中的发展方向。     

平台式重力仪航空重力测量数据后处理技术研究

针对航空重力测量对数据后处理的要求,结合平台式重力仪系统的组成与工作原理,在重力异常信号的频域特征基础上,设计出一套有严格频域规范的航空重力数据后处理流程,并对某海域实测数据进行了处理。结果表明,重力异常值内符合精度为12条东西测线达到0.43mGal/140s和0.84mGal/100s,4条南北测线达到0.39mGal/140s和0.79mGal/100s;以同测线GT-2A单次测量结果为标准值统计标准差,12条东西测线为0.72mGal/140s和0.98mGal/100s,4条南北测线为1.41mGal/140s和1.53mGal/100s。结果表明,设计的航空重力测量数据后处理方法可以实现重力异常信号的高精度提取。     

平台式航空/海洋重力仪精密温度控制研究

以平台式航空/海洋重力仪为基础,为降低温度变化对其惯性器件尤其是重力敏感器的影响,保证重力测量的精度,设计了一种三级五路结构的高精度温度控制系统。以包含核心惯性器件的第三级温控为例,重点分析了温控对象的建模、非线性PI控制器的设计等问题,并进行了仿真分析和高低温环境下的试验验证,结果表明,在-10℃^+45℃温度范围内3个温控通道的温度变化量和温度稳定性均小于0.01℃,达到了重力仪的温度控制精度要求,为重力仪实现高精度重力测量提供了有利的温度条件。     

激光捷联惯导车载重力测量试验

惯性导航系统中加速度计测量的比力是载体运动加速度与重力加速度的矢量和,当载体运动加速度能够被有效分离时,满足一定精度水平的惯性导航系统就可以成为动态重力仪。捷联式惯性导航系统体积小、重量轻、系统组成简单,可以在记录下惯性器件原始输出信息之后,通过离线处理过程进行数据处理和精度挖掘。本文通过对某高精度激光捷联惯导进行相应的软硬件更改,获得了兼具导航及重力测量功能的一体式动态重力仪。地面车载试验是验证动态重力仪的测量精度的有效手段之一,本文将一组高速公路重复测线的数据进行了处理和分析,结果表明在平均车速72km/hr的条件下,半波长分辨率2km,自由空间重力异常内符合精度优于1mGal。     

基于正反Kalman滤波的动基座重力仪数据处理方法

重力数据处理是动基座重力仪的核心技术,采用了一种基于正反Kalman滤波的数据处理方法提取重力异常值.以动基座重力仪(Sea and Air Gravity,SAG)为研究对象,根据系统参数推导了Kalman滤波方程,并运用正反Kalman滤波方法处理了SAG某飞行架次的数据.将提取的重力异常值与同机搭载飞行的俄罗斯高精度重力仪GT-1A的结果进行比对,试验结果表明,两者滤波结果差值的均方根误差要小于1 mGal.     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

Preparation of Highly Dispersed Antimony-doped Tin Oxide Nano-powder via Ion-exchange Hydrolysis of SnCl4 and SbCl3 and Azeotropic Drying

Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration.     

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

超声速燃烧数值模拟中的湍流与化学反应相互作用模型

高精度数值模拟有助于理解超声速湍流燃烧中湍流与化学反应的相互作用,可为发动机燃烧室等工程应用设计提供可靠的预测模型。除直接数值模拟外,目前在湍流燃烧应用中使用的大涡模拟和雷诺平均Navier-Stokes模拟均需要借助模型模化发生在湍流小尺度上的流动与化学反应过程对湍流大尺度运动的影响。现有的湍流与化学反应相互作用模型大致可分为:火焰面类模型和概率密度函数类模型,2类模型在不同的应用中各自具有优势和局限性。此外,现有模型大都基于低马赫数燃烧,而超声速燃烧中通常会伴随快速混合、局部熄火和再着火以及激波等复杂过程,这为发展其中的湍流与化学反应相互作用模型提出了更多的挑战。     

适于低轨卫星IP网络的单核共享树组播算法(英文)

为了解决低轨卫星IP网络中现有典型源组播算法的信道资源浪费问题,本文提出了一套单核共享树组播算法,即核心群合并共享树(CCST)和加权核心群合并共享树(w-CCST)算法。CCST 算法包括动态近似中心(DAC)选核方法和核心群合并组播路径构建方法。DAC方法专为周期、规律运动的低轨卫星网络提出,不需要复杂的星上计算。在核心群合并方法中,以核节点作为初始核心群,通过核心群和剩余组成员的最短路径方法逐步扩展直至整棵组播树构建完成,从而使得组播树的树代价最小,大大提高了网络的带宽利用率和组播传输效率。w-CCST 算法中所提出的加权因子可以调整树代价和端到端传播时延之间的折衷程度,因此,可以通过调整加权因子来适度增大树代价、降低端到端传播时延以支持某些端到端时延要求苛刻的实时组播业务。最后,与低轨卫星 IP 网络中典型算法进行了性能比较,仿真结果说明,CCST 算法的平均树代价比其它算法显著降低,w-CCST 算法的平均端到端传播时延小于 CCST 算法。     

Jet Vectoring Control Using a Novel Synthetic Jet Actuator

A primary air jet vectoring control system with a novel synthetic jet actuator (SJA) is presented and simulated numerically. The results show that, in comparison with an existing traditional synthetic jet actuator, which is able to perform the duty of either “push” or “pull”, one novel synthetic jet actuator can fulfill both “push” and “pull” functions to vector the primary jet by shifting a slide block inside it. Therefore, because the new actuator possesses greater efficiency, it has potentiality to replace the existing one in various appli- cations, such as thrust vectoring and the reduction of thermal signature. Moreover, as the novel actuator can fulfill those functions that the existing one can not, it may well be expected to popularize it into more flow control systems.     

Nonlinear Adaptive Slewing Motion Control of Spacecraft Truss Driven by Synchronous V-gimbaled CMG Precession

The slewing motion control of a truss arm driven by a V-gimbaled control-moment-gyro (CMG) is a nonlinear control problem. The V-gimbaled CMG consists of a pair of gyros that must precess synchronously. The moment of inertia of the system, the angular momentum of the gyros and the external disturbances are not exactly known. With the help of feedback linearization and recursive Lyapunov design method, an adaptive nonlinear controller is designed to deal with the unknown items. Performance of the proposed controller is verified by simulation.     

An SOR Implicit Time-accurate Scheme in Calculating Unsteady Flows

A new time-accurate marching scheme for unsteady flow calculations is proposed in the present work. This method is the combination of classical Successive Over-Relaxation (SOR) iteration method and Jacobian matrix diagonally dominant splitting method of LUSGS. One advantage of this algorithm is the second-order accuracy because of no factorization error. Another advantage is the low computational cost because the Jacobian matrices and fluxes are only calculated once in each physical time step. And, the SOR algorithm has better convergence property than Gauss-Seidel. To investigate its accuracy and convergency, several unsteady flow computa- tional tests are carried out by using the proposed SOR algorithm. Roe’s FDS scheme is used to discritize the inviscid flux terms. Un- steady computational results of SOR are compared with the experiment results and those of Gauss-Seidel. Results reveal that the numerical results agree well with the experimental data and the second-order accuracy can be obtained as the Gauss-Seidel for unsteady flow computations. The impact of SOR factor is investigated for unsteady computations by using different SOR factors in this algorithm to simulate each computational test. Different numbers of inner iterations are needed to converge to the same criterion for different SOR factors and optimal choice of SOR factor can improve the computational efficiency greatly.