共查询到20条相似文献,搜索用时 15 毫秒
1.
2.
含旋转铰间隙平面运动机构可靠性灵敏度分析 总被引:1,自引:1,他引:0
基于时变运动机构可靠性灵敏度分析方法,考虑机构杆件旋转铰间隙对运动精度的影响,发展出一种计算含旋转铰间隙平面运动机构全局灵敏度指标的分析方法。该方法首先基于该种运动机构的误差函数构建其包络函数,进而解析推导其可靠性计算公式,在此基础上结合时变运动机构全局灵敏度分析方法,求得含旋转铰间隙平面运动机构各全局灵敏度指标的计算公式。最后,将本文所提方法应用到两个具体机构算例,所得结果数据与蒙特卡罗法计算结果相比吻合度高,具有较高的精确度;同时,计算成本也大大降低。 相似文献
3.
4.
Direct and indirect dark matter detection relies on the scattering of the dark matter candidate on nucleons or nuclei. Here, attention is focused on dark matter candidates (neutralinos) predicted in the minimal supersymmetric standard model and its constrained version with universal input soft supersymmetry-breaking masses. Current expectations for elastic scattering cross sections for neutralinos on protons are discussed with particular attention to satisfying all current accelerator constraints as well as insuring a sufficient cosmological relic density to account for the dark matter in the universe. 相似文献
5.
杨百平 《民用飞机设计与研究》2018,(3)
防误操作设计作为飞机发动机操纵系统设计的一个重要组成部分,主要是防止用于反推力和低于飞行状态的桨距调定的每一操纵器件被误动而导致不安全事件的发生。通过对比分析国内外飞机防误操作的设计特点,以及新舟飞机防误操作设计上存在的不足及使用过程中暴露出来的问题,结合新舟飞机外场运营飞行数据,提出了采用轮速与空地信号同时控制飞行慢车电磁限动的控制方式,以及采用具有明显可见动作的飞行慢车机械限动方式,提高了系统的工作可靠性。 相似文献
6.
7.
对CMA盲均衡技术在海上靶场遥测信号接收中的应用进行了仿真研究,同时在CMA盲均衡算法的基础上提出了一种能量匹配约束条件,对在能量匹配约束条件下的CMA算法进行了理论分析和算法推导。根据峰度准则,输入输出信号能量相等是盲均衡实现的充要条件的前提,依据这一前提,对CMA算法代价函数进行修正,有效提高了算法的收敛速度和均衡性能。 相似文献
8.
以质量和制造体系建设为纲,以成本控制为目,本着无畏开拓、致力于洪都航空产品转包生产国际化的思想,通过核心与外围系统集成的方法,阐述了在洪都航空产品转包与国际制造业接轨中存在的问题并提出建设性解决方案。 相似文献
9.
R. Novick 《Space Science Reviews》1975,18(3):389-408
The scientific motivation for X-ray polarimetry is discussed with particular emphasis on the information that might be obtained on the binary X-ray pulsars in addition to a number of other classes of objects including solar flares. Detailed discussions are given for Thomson-scattering and Bragg-crystal polarimeters with numerical estimates for the sensitivity of various existing and proposed instruments.Presented at the International Conference on X-Rays in Space held at the University of Calgary, Calgary, Canada, 14–21 August 1974 相似文献
10.
压气机直、弯静叶Clocking效应实验研究 总被引:1,自引:1,他引:1
实验研究静叶Clocking效应对采用直、弯静叶的某低速双级轴流压气机气动性能影响.结果表明,随Clocking位置不同,上游静叶尾迹被输运到下游叶列流道中不同周向位置并与该列叶栅不同区域流体掺混是导致压气机性能变化的主要原因,且采用弯曲静叶的压气机性能随Clocking位置不同而变化的幅度要小一些.静叶Clocking位置固定时,采用弯静叶时压气机效率比直静叶时明显提高,且随流量减小而趋势显著,设计工况和近喘振点处分别约提高0.7%、3.5%.针对本文研究的压气机,综合静叶造型和Clocking效应影响,采用弯曲静叶的压气机设计点处效率最高可提高1.22%,最低提高为0.07%. 相似文献
11.
对重叠网格技术中新出现的Cut-Paste方法进行了研究和改进,结合网格洞边界标识的缝合与重组织技术,首次将其应用在DRAGON网格生成中,提出了二维DRAGON网格的自动生成方法,最后编制出通用程序,给出了多体网格的复杂示例.实际计算表明,本文方法具有自动化程度高、可靠性好、DRAGON网格质量高等特点. 相似文献
12.
13.
14.
15.
在查阅、对比和分析国内大量飞机型号研制工作I、II级网络图的基础上,对我国航空主机厂飞机型号研制工作网络图的沿革轨迹进行了归纳和分析。根据国家有关飞机型号研制工作网络图的标准,结合现代项目管理形势发展需求,对飞机型号研制工作网络图提出了进一步完善和规范的建议。 相似文献
16.
2A12-T4铝合金长期大气腐蚀损伤规律 总被引:1,自引:1,他引:1
在海南省万宁地区开展了2A12-T4铝合金暴露7年、12年和20年的大气腐蚀试验,根据腐蚀特征将腐蚀区域划分为单侧腐蚀区和双侧腐蚀区,以结构最小剩余厚度值作为腐蚀特征量,进行了不同年限试验件中不同腐蚀区域最小剩余厚度的测量和统计分析,确定了满足99.9%可靠度与95%置信度的最小剩余厚度值以及95%置信度下的最小剩余厚度置信区间,并开展了腐蚀损伤形貌的金相分析。研究结果表明:2A12-T4铝合金大气腐蚀特征量服从正态分布;在大气腐蚀7~20年间2A12-T4铝合金板件的最小剩余厚度值是线性减小的;2A12-T4铝合金大气腐蚀7年后处于点蚀、晶间腐蚀、剥蚀的过渡期,12年后发生全面剥蚀,20年后剥蚀已相当严重且伴随着点蚀;双侧腐蚀区与单侧腐蚀区相比腐蚀深度更大且剥蚀层剥落严重。 相似文献
17.
针对诸如壳体-喷嘴一体化的固体火箭发动机过渡段、环壳燃料箱等复杂型面的缠绕,应用曲面理论和力学分析方法,研究了纤维缠绕的成型压力与曲面几何的关系,进而确定了一般曲面、负荷斯曲面、环壳以及过渡段缠绕过程的纤维架空条件与判据,为复杂型面的缠绕成形奠定基础。 相似文献
18.
19.
《中国航空学报》2021,34(7):50-61
This paper focuses on aeroelastic prediction and analysis for a transonic fan rotor with only its “hot” (running) blade shape available, which is often the case in practical engineering such as in the design stage. Based on an in-house and well-validated CFD solver and a hybrid structural finite element modeling/modal approach, three main aspects are considered with special emphasis on dealing with the “hot” blade shape. First, static aeroelastic analysis is presented for shape transformation between “cold” (manufacturing) and “hot” blades, and influence of the dynamic variation of “hot” shape on evaluated aerodynamic performance is investigated. Second, implementation of the energy method for flutter prediction is given and both a regularly used fixed “hot” shape and a variable “hot” shape are considered. Through comparison, influence of the dynamic variation of “hot” shape on evaluated aeroelastic stability is also investigated. Third, another common way to predict flutter, time-domain method, is used for the same concerned case, from which the predicted flutter characteristics are compared with those from the energy method. A well-publicized axial-flow transonic fan rotor, Rotor 67, is selected as a typical example, and the corresponding numerical results and discussions are presented in detail. 相似文献
20.
本文用Jameson的三维欧拉方程有限体积法、四步Runge-Kutta时间推进格式,计算机身和大后掠细长机翼的三维可压缩绕流。对钝头机身,用C-O型网格;尖头机身与大后掠细长机翼用H-O型网格。本文介绍钝头旋成体、带座舱前机身和三角翼绕流的计算结果,显示流场等值M线分布,计算压强系数分布与实验比较,以及三角翼大迎角分离涡等。由于用了隐式残值光顺等加速收敛措施,有效地减少推进步数,节省机时。 相似文献