中等PRF机载PD雷达频域恒虚警处理性能计算

 一、引言 在中等脉冲重复频率（PRF）工作时,MTI-FFT-CFAR是PD或MTD雷达信号处理器的一种典型结构。Lawrence和Moore对MTD雷达在地杂波和气象杂波背景中的检测性能的计算中,假设了邻近距离单元中的杂波样本是独立同分布的（iid）。而在MTI-FFT-频域单元平均CFAR处理器中,频域单元的杂波样本明显偏离iid假设。门     

On the Optimization of MTI Clutter Rejection

In this paper is formulated the problem of optimization of the improvement factor of a nonrecursive MTI by minimization of a quadratic form. The minimum normalized clutter output (a reciprocal of the average improvement factor) is the minimum eigenvalue of this quadratic form, and the corresponding eigenvector is the optimal weight to be used in this filter. By use of classic matrix theory, some properties of this MTI improvement factor are shown, namely, that it is bounded and is a monotonic function of the clutter spectrum variance. Also discussed is the limit of an MTI system having a large number of cancellers. Finally, the problem of a staggered-PRF MTI filter is examined, for which it is shown that its improvement factor is bounded by two equivalent constant-PRF MTI systems. One of these systems has a PRF equal to the lowest PRF of the staggered-PRF system, while the other has a PRF equal to the highest PRF of the staggered system.     

Properties of Staggered PRF Radar Spectral Components

Expressions for moving target indicator (MTI) improvement factor limitation due to pulse repetition frequency (PRF) staggering and loss of target detectability for various values of Doppler frequency in the passband are presented. It is also shown that the product of variance of stagger periods and clutter variance is an important parameter determining the performance of a staggered PRF MTI radar.     

The Effect of Staggered PRF's on MTI Signal Detection

Long-range surveillance radars use MTI techniques to detect moving targets in a clutter background. The transmitter PRF is usually staggered to eliminate the blind speeds due to aliasing of the target and clutter spectra. A spectral analysis of the target and clutter signals is performed for the case of nonuniform sampling, and it is shown that the clutter spectral density continues to fold over at the basic PRF, but the signal spectrum becomes dispersed in frequency, which means that an MTI rader will never be completely blind to moving targets.     

Clutter suppression using recursive and nonrecursive MTI filters

The author calculates the effectiveness of clutter suppression of a moving-target-indicator (MTI) filter in tandem with a fast-Fourier-transform (FFT) Doppler filter bank, taking into account the transient response of the MTI filter. Both recursive and nonrecursive filters are considered. The analysis is extended to the high-pulse-repetition-frequency (PRF) case with clutter fold over. The results can be used to select key design parameters, including the MTI filter, the window size, and the initial transient segment to be discarded. Numerical examples are included     

Some Results on Pulse-Burst Radar Design

Pulse-burst radar attempts to capitalize on the advantages of both low and high PRF radar while minimizing their disadvantages. Optimization procedures are applied to the choice of transmitter signal and receiver weighting. The results are compared to the use of Tschebyscheff transmitter weighting with an optimized receiver. The effects of various design and operational parameters are indicated. The performance of pulse-burst radar is qualitatively compared to that of conventional low and high PRF Doppler radar. It is concluded that pulse-burst radar offers the possibility of achieving a solution to the MTI problem under operational conditions where conventional Doppler radars fail.     

MTI Optimization in a Multiple-Clutter Environment

A means of optimizing a moving target indicator (MTI) filter for rejecting several types of clutter, which are generated by different mechanisms such as by rain or the ground, is formulated. lt is found that the optimal performance of such a filter depends on the spectral density functions, average radar cross sections, and the relative mean Doppler frequencies of each type of clutter. lt is shown that the optimal improvement factor of such a filter is bounded by the weighted average (weighted in accordance with the radar cross sections of the clutter types) of the improvement factor for the individual clutter type. lt is also shown that the improvement factor of such a filter is a function of the relative mean Doppler frequency f0 between the clutter types. As f0 increases, the performance of the MTI system degrades. The worst improvement factor occurs when f0 is equal to half of the radar pulse-repetition frequency (PRF).     

Quantization Noise in Digital Moving Target Indication Systems

This paper deals precisely with the effect of quantum or step size in an analog-to-digital converter on the quantization noise in the output of MTI (moving target indication) radar processors. The correlation between quantization errors on successive pulses is considered in the analysis and is shown to have a small quieting effect on the output quantization noise.     

Bandpass Signal Sampling and Coherent Detection

Coherent detectors in radar and communications receivers are generally implemented in the form of two parallel baseband channels which form in-phase (I) and quadrature (Q) components of a received RF/IF signal. Phase errors of several degrees due to imperfect matching of these separate channels limit the performance achievable from signal processors such as moving target indicators (MTI), coherent integrators, Doppler filters, antenna array processors, and coherent sidelobe cancellers. Thus methods in which a single analog to digital (A/D) converter samples and digitizes the IF signal directly, eliminating the need for IF to baseband conversion, have been of recent interest and are the subject of this paper. To obtain accurate coherent detection from IF samples taken near the Nyquist rate requires interpolation based upon a number of stored samples. An algorithm derived from sampling theory is defined and used to demonstrate accurate reconstruction of the original IF signal from digitized samples. In-phase and quadrature components of the signal are shown to be available from processed samples with demonstrated phase errors less than 0.2°.     

A localized adaptive MTD processor

The problem of achieving the optimum moving target indicator (MTI) detection performance in strong clutter of unknown spectrum when the set of data available to the estimation of clutter statistics is small due to a severely nonhomogeneous environment is studied. A new adaptive implementation, called the Doppler domain localized generalized likelihood ratio processor (DDL-GLR), is proposed, and its detection performance is studied in detail. It is shown that the DDL-GLR is a data-efficient implementation of the high-order optimum detector and has several advantages of practical importance over the adaptive processors     

On Increasing Usable MTI Filter Bandwidth by Removing Linear-Phase Constraint

It has been shown in the literature that the linear-phase constraint of finite-duration impulse-response (FIR) digital filters can, under certain circumstances, be effectively traded either for a better filter amplitude response or a reduction in the number of filter coeficients. It is shown that such a tradeoff can be exploited for moving target indicator (MTI) radar signal processors to increase the usable bandwidth for target detection. Although it is demonstrated that the increase is significant for narrowband (ground) clutter, it is negligible for wideband (weather) clutter.     

Comparison between monostatic and bistatic antenna configurationsfor STAP

The unique characteristics of bistatic radar operation on the performance of airborne/spaceborne moving target indicator (MTI) radars that use space-time adaptive processing (STAP) are discussed. It has been shown that monostatic STAP radar has the following properties. 1) For a horizontal flight path and a planar Earth the curves of constant clutter Doppler (isodops) are hyperbolas. 2) For a sidelooking antenna geometry the clutter Doppler is range independent. 3) Clutter trajectories in the cosφ-F plane (F=normalized Doppler) are in general ellipses (or straight lines for a sidelooking array). We demonstrate that these well-known properties are distorted by the displacement between transmitter and receiver in a bistatic configuration. It is shown that even for the sidelooking array geometry the clutter Doppler is range-dependent which requires adaptation of the STAP processor for each individual range gate. Conclusions for the design of STAP processors are drawn     

Improvement Factor of the Phase-Sensitive Noncoherent MTI

The phase-sensitive noncoherent MTI detects targets by relative motion between the target and an extended clutter background. In this type of MTI, the phase of the target is compared with the phase of the clutter in an adjacent range bin. Theoretical analysis of the system's performance is presented. The improvement factors for single- and double-delay periodic filters are derived and computational results are included.     

弹载合成孔径雷达自适应重频分析与设计

弹载合成孔径雷达(Synthetic Aperture Radar,SAR)的目标距离、视线角由于高速逼近目标而快速变化,这导致传统的固定脉冲重复频率(Pulse Repetition Frequency,PRF)(简称重频)波形难以兼顾弹载SAR雷达在成像各方面的约束条件,故需要根据当前弹体运动和弹目关系变化情况实时计算重频。详细分析了影响重频选择的各项因素,包括避免距离模糊、方位模糊、高度杂波、发射遮挡影响及SAR成像分辨率、系统相参性要求等影响因素,并设计了自适应重频计算的工作流程。某SAR雷达系统实验表明,该设计能够在实际飞行弹道条件下根据实际弹目关系自适应调整脉冲重复频率,从而更好地实现SAR雷达系统的工作性能,有效解决了固定重频波形不能适应弹载SAR工作条件的难题。     

MTI Loss with Coherent Integration of Weighted Pulses

A moving target indicator (MTI) preceding a coherent integrator causes a degradation in the signal-to-noise ratio (SNR). This negative effect can be reduced by weighting of the MTI output pulses before the integration process. Two examples are given which show the improvement in SNR and detection probability as a result of this weighting.     

Performance Degradation of MTI Circuits Due to Amplitude Limiting

The loss in output signal-to-noise ratio (SNR) due to amplitude limiting is obtained for a radar circuit consisting of a bandpass limiter, coherent demodulator, matched filter, and moving-target-indicator (MTI) filter. The circuit is used in scanning MTI radars. The tandem connection of the limiter and coherent demodulator is a model for the saturation of the intermediate-frequency (IF) demodulator of an MTI radar. Results on special functions are used to obtain simple formulas for the loss in output SNR relative to a linear IF demodulator when the input SNR is less than -15 dB and the number of hits per 3-dB beamwidth exceeds 15.     

MTI Weightings

A comparison is made between optimum weighting, which maximizes Pd for a given ?, and several MTI weightings. It is shown that a special case of the optimal weighting is approximately equal to the MTI weighting which maximizes the MTI improvement factor.     

A Comparison of Noncoherent and Coherent MTI Improvement Factors

An analysis based on statistical considerations and Monte Carlo simulations indicates that a noncoherent moving target indicator (MTI) using a linear envelope detector differs from one using a square law envelope detector. The square law envelope detector is usually described in the literature because of ease of analysis, and it is commonly stated or implied that the results are the same for the two cases because of the similar spectral characteristics of the detectors. A comparison is made between the two noncoherent MTIs and the coherent MTI in terms of clutter attenuation and MTI improvement factors.     

Medium PRF set selection using evolutionary algorithms

This paper presents a new and novel method of selecting multiple pulse repetition frequency (PRF) sets for use in medium PRF pulsed-Doppler radars. Evolutionary algorithms are used to minimise the blind areas in the range/Doppler space. The evolutionary algorithm allows optimal solutions to be generated quickly, far faster than with exhaustive searches, and is fully automatic, unlike existing techniques. The evolved solutions compare very favorably against the results of both an exhaustive search and existing published PRF set selection methods. This evolutionary approach to generation of PRF sets is a major advance in medium PRF radar design.