Dim target detection using high order correlation method

This work presents a method for clutter rejection and dim target track detection from infrared (IR) satellite data using neural networks. A high-order correlation method which recursively computes the spatio-temporal cross-correlations between data of several consecutive scans is developed. The implementation of this scheme using a connectionist network is presented. Several important properties of the high-order correlation method which indicate that the resultant filtered images capture all the target information are established. The simulation results obtained with this approach show at least 93% clutter rejection. Further improvement in the clutter rejection rate is achieved by modifying the high-order correlation method to incorporate the target motion dynamics. The implementation of this modified high-order correlation using a high-order neural network architecture is demonstrated. The simulation results indicate at least 97% clutter rejection rate for this method. A comparison is also made between the methods developed here and the conventional frequency domain three-dimensional (3-D) filtering scheme, and the simulation results are provided     

Robust space-time adaptive processing for airborne radar in nonhomogeneous clutter environments

Space-time adaptive processing (STAP) holds tremendous potential for the new generation airborne surveillance radar, in which the phased array antennas and pulse Doppler processing mode are adopted. A new STAP approach using the multiple-beam and multiple Doppler channels is presented here for airborne phased array radar. The approach with space-time multiple-beam (STMB) architecture is robust to array errors and has very low system degrees of freedom (DOFs). Hence, it has low sample support requirement and it is very suitable for the practical planar phased array radar under nonhomogeneous clutter environments. Meanwhile, a new nonhomogeneous detector (NHD) based on the correlation dimension (CD) is also proposed here, which is used as an effective method to screen tracing data prior to detection processing. It can further improve the performance of the STAP approach in the severely nonhomogeneous clutter environments. Therefore, a scheme that incorporates the correlation dimension nonhomogeneity detector (CD-NHD) with the STMB is recommended, which we term CD-NHD-STMB. The experimental simulation results indicate that: 1) the STMB processor is robust to array element error and has high performance under nonhomogeneous clutter environments; 2) the CD-NHD is also effective on the nonhomogeneous clutter. As a result, the CD-NHD-STMB scheme is robust to array element error and nonhomogeneous clutter, and therefore available for airborne phased array radar applications.     

Adaptive detection schemes in compound-Gaussian clutter

Radar detection of coherent pulse trains embedded in compound-Gaussian disturbance with partially known statistics is discussed. We first give a thorough derivation of two recently proposed adaptive detection structures. Next, we derive a different detection scheme exploiting the assumption that the clutter is wide-sense stationary. Resorting to the theory of circulant matrices, in fact, we demonstrate that the estimation of the structure of the clutter covariance matrix can be reduced to the estimation of its eigenvalues, which in turn can be (efficiently) done via fast Fourier transform codes. After a thorough performance assessment, mostly carried on via computer simulations, the results show that the newly proposed detector achieves better performance than the two previously introduced adaptive detectors. Moreover, a sensitivity analysis shows that, even though this detector does not strictly guarantee the constant false alarm rate property with respect to the clutter covariance matrix, it is robust, in the sense that its performance is only slightly affected by variations in the clutter temporal correlation     

Multiple target detection using modified high order correlations

This work is concerned with the problem of multiple target track detection in heavy clutter. Using the “modified high order correlation” (HOC) process and a track scoring mechanism a new method is developed to perform data association and track identification in the presence of heavy clutter. Using this new scheme any number of very close, crossing or splitting target tracks can be resolved without increasing the computational complexity of the algorithm. The applicability of the method for continuous detection of target tracks that can originate and terminate at any scan is also demonstrated, In addition, the operating characteristics as a function of the clutter density are also provided. Simulation results on all the cases are presented     

Manoeuvring target tracking in clutter using particle filters

A particle filter (PF) is a recursive numerical technique which uses random sampling to approximate the optimal solution to target tracking problems involving nonlinearities and/or non-Gaussianity. A set of particle filtering methods for tracking and manoeuvering target in clutter from angle-only measurements is presented and evaluated. The aim is to compare PFs to a well-established tracking algorithm, the IMM-PDA-EKF (interacting multiple model, probabilistic data association, extended Kalman filter), and to provide an insight into which aspects of PF design are of most importance under given conditions. Monte Carlo simulations show that the use of a resampling scheme which produces particles with distinct values offers significant improvements under almost all conditions. Interestingly, under all conditions considered here,using this resampling scheme with blind particle proposals is shown to be superior, in the sense of providing improved performance for a fixed computational expense, to measurement-directed particle proposals with the same resampling scheme. This occurs even under conditions favourable to the use of measurement-directed proposals. The IMM-PDA-EKF performs poorly compared with the PFs for large clutter densities but is more effective when the measurements are precise.     

STOCHASTIC NEURAL NETWORK AND ITS APPLICATION TO MULTI－MANEUVERING TARGET TRACKING

ＳＴＯＣＨＡＳＴＩＣＮＥＵＲＡＬＮＥＴＷＯＲＫＡＮＤＩＴＳＡＰＰＬＩＣＡＴＩＯＮＴＯＭＵＬＴＩ－ＭＡＮＥＵＶＥＲＩＮＧＴＡＲＧＥＴＴＲＡＣＫＩＮＧＪｉｎｇＺｈｏｎｇｌｉａｎｇ；ＤａｉＧｕａｎｚｈｏｎｇ；ＴｏｎｇＭｉｎｇａｎ；ＺｈｏｕＨｏｎｇｒｅｎ（Ｄ...     

一种机动多目标雷达视频信号模拟器的设计

给出了一种机动多目标雷达视频信号模拟器的软硬件设计方案,它可实时输出所需的多个动目标雷达视频信号,雷达信号的类型、目标的数量、目标的回波特性、目标的运动特性、杂波的类型及参数等均可方便地进行设置。该模拟器可满足各种雷达信号处理算法(如杂波抑制、恒虚警检测、动目标跟踪、多基地数据融合等)的测试与效果分析,以及对雷达信号处理机等进行性能调试与测试的需要。     

Novel data association schemes for the probability hypothesis density filter

The probability hypothesis density (PHD) filter is a practical alternative to the optimal Bayesian multi-target Alter based on finite set statistics. It propagates the PHD function, a first-order moment of the full multi-target posterior density. The peaks of the PHD function give estimates of target states. However, the PHD filter keeps no record of target identities and hence does not produce track-valued estimates of individual targets. We propose two different schemes according to which PHD filter can provide track-valued estimates of individual targets. Both schemes use the probabilistic data-association functionality albeit in different ways. In the first scheme, the outputs of the PHD filter are partitioned into tracks by performing track-to-estimate association. The second scheme uses the PHD filter as a clutter filter to eliminate some of the clutter from the measurement set before it is subjected to existing data association techniques. In both schemes, the PHD filter effectively reduces the size of the data that would be subject to data association. We consider the use of multiple hypothesis tracking (MHT) for the purpose of data association. The performance of the proposed schemes are discussed and compared with that of MHT.     

基于决策不确定性的多目标跟踪传感器管理

针对高杂波、电子干扰环境,在量测驱动的多目标滤波框架下提出了一种基于决策不确定性的传感器管理方法。首先,根据部分可观测马尔科夫决策过程的理论,给出了基于Rényi信息增量的传感器管理一般方法。其次,综合考虑决策过程的信息完整性、信息质量、信息的内涵等因素,在量测驱动的自适应滤波框架下,基于目标运动态势评估多目标决策不确定性水平,并选取最大决策不确定性目标。最后,以最大决策不确定性目标的信息增量最大化为准则进行传感器分配方案的求解。仿真实验表明所提方法能够有效抑制电子干扰、杂波对多目标跟踪及传感器分配的影响,与基于威胁的传感器管理方法相比,所提方法的平均最优子模式分配（OSPA）距离及平均计算时长均显著降低,且在高杂波、电子干扰情形下具有较高的可靠性。     

基于OTHR与纯角度传感器群数据关联的模式辨识与定位精度提升

 天波超视距雷达(OTHR)目标跟踪面临着"三低"(低检测概率、低数据率和低测量精度)和"多径"(多条传播路径)的挑战,因此传播模式的准确辨识与目标定位精度提升是改善跟踪能力的关键。首先利用纯角度传感器群获得目标地理位置的初步估计,然后采用极大似然估计建立了OTHR的传播模式和杂波模式的辨识规则,进而利用最小方差估计准则实现OTHR和纯角度传感器群的量测融合。仿真结果表明,此算法的模式辨识正确率很高,能明显提升方位角的测量精度,但是不能明显提升径向距的精度。     

Compact AM Signals for Maximum Clutter Rejection

The transmitted signal is assumed to consist of a close succession of rectangular pulses of equal width. A matched filter scheme is employed and a theory is developed for a computer-aided optimization of the envelope of monotone compact signals for maximum rejection of dense clutter of any given distribution in range. Specific results are presented and indeterminate cases are discussed.     

Detection performance in K-distributed and correlatedRayleigh clutters

Performance prediction for a detection system employing noncoherent integration is carried out for a chi-square family of fluctuating targets in K-distributed clutter plus noise. The detection performance for Swerling 11 targets in the K-distributed clutter plus noise is compared with that in exponentially correlated Rayleigh clutter. The results show that the performance prediction based on N pulses integrated in clutter plus noise using the K-distributed clutter model may be approximately equivalent to that using the exponentially correlated Rayleigh-distributed clutter model     

机载MIMO雷达空时自适应杂波对消器

针对机载多输入多输出(MIMO)雷达杂波分布呈现空时耦合特性,提出一种空时自适应杂波对消器.利用机载MIMO雷达的脉冲回波数据,构造杂波对消器的系数矩阵.通过空时自适应杂波对消器的预处理,可以有效地抑制杂波,并通过与常规空时处理算法的级联,最终可以有效提高动目标的检测性能.实现了由传统地基雷达杂波对消器向机载运动平台的推广.仿真结果表明,这种自适应杂波对消器不仅适用于正侧视雷达,对于非正侧视雷达也同样适用.     

Radar Detection in Weibull Clutter

Radar detection in Weibull clutter is examined from a statistical detection viewpoint. Weibull clutter parameters are determined and related to measured values of land and sea clutter. Optimum performance in Weibull clutter is determined, and practical receivers that approach this performance are identified. Receiver performance in Rayleigh, log-normal, and Weibull clutter is evaluated and compared.     

Radar detection in clutter

Clutter is defined as any unwanted radar return. The presence of clutter in a range/Doppler cell complicates the detection of a target return signal in that cell. In order to quantify the effect of clutter on the probability of detection, we must first specify sets of models suitable for representing the clutter and target. The simplest and most common model for clutter is based on the gamma density. We include two additional models, the NCG and NCGG clutter models for low grazing angles. They are motivated by physical arguments, the latter of which can accommodate the well-known phenomenon of speckle. Using one of these models for clutter together with one of several models for targets, we determine, in a range/Doppler cell, expressions for probabilities of detection of a target in the presence of clutter. It is important to control the probability of false alarms. The presence of clutter in a cell necessitates an increase in the detection threshold setting in order to control false alarms, thus lowering the probability of detection. If the clutter level is unknown, then we need to take measurements of the clutter and use it to adjust the threshold. The more clutter samples we take, the better the estimate of the clutter level and the less is the resulting detection loss. Using the expressions for the probability of detection in clutter, we can quantify the detection loss for a pair of commonly used constant false-alarm rate (CFAR) techniques and investigate how the loss varies with different parameter values, especially with regard to the number of clutter samples taken to estimate the clutter level.     

Multiband coherent radar detection against compound-Gaussianclutter

A Multiband GLRT-LQ (Generalized Likelihood Ratio Test-Linear Quadratic), MBGLRT-LQ, detector is derived for the coherent radar target detection against a compound-Gaussian clutter background. This scheme is an extension to the multiband case of the Asymptotically Optimum Detector (AOD), also derived under the name of GLRT-LQ in. The proposed multiband version of the algorithm shows two main advantages with respect to the original single-band algorithm. 1) For the adaptive implementation, it requires a much smaller area of homogeneous clutter echoes to estimate the covariance matrix of the interference; 2) it provides an optimum processing of the radar echoes when the radar operates in frequency agility, as electronic counter-countermeasure (ECCM) strategy. A closed form performance analysis is provided for the MBGLRT-LQ detector, which is used to compare it with the single-band version. An application to live recorded data is also presented to validate the obtained results     

Adaptive polarimetric target detection with coherent radar. I.Detection against Gaussian background

The derivation of a completely adaptive polarimetric coherent scheme to detect a radar target against a Gaussian background is presented. A previously proposed Generalized Likelihood Ratio Test (GLRT) polarimetric detector is extended to the case of a general number of channels; this exploits the polarimetric characteristics of the received radar echoes to improve the detection performance. Together with the fully adaptive scheme, a model-based detector is derived that has a lower estimation loss. A complete theoretical expression is derived for the detection performance of both proposed polarimetric detectors. They are shown to have Constant False Alarm Rate (CFAR) when operating against Gaussian clutter, but to be sensitive to deviations from the Gaussian statistic. The application to recorded radar data demonstrates the performance improvement achievable in practice     

Road-map assisted ground moving target tracking

Tracking ground targets with airborne GMTI (ground moving target indicator) sensor measurements proves to be a challenging task due to high target density, high clutter, and low visibility. The exploitation of nonstandard background information such as road maps and terrain information is therefore highly desirable for the enhancement of track quality and track continuity. The present paper presents a Bayesian approach to incorporate such information consistently. It is particularly suited to deal with winding roads and networks of roads. The target dynamics is modeled in quasi one-dimensional road coordinates and mapped onto ground coordinates using linear road segments taking road map errors into account. The case of several intersecting roads with different characteristics, such as mean curvature, slope, or visibility, is treated within an interacting multiple model (IMM) scheme. Targets can be masked both by the clutter notch of the sensor and by terrain obstacles. Both effects are modeled using a sensor-target state dependent detection probability. The iterative filter equations are formulated within a framework of Gaussian sum approximations on the one hand and a particle filter approach on the other hand. Simulation results for single targets taken from a realistic ground scenario show strongly reduced target location errors compared with the case of neglecting road-map information. By modeling the clutter notch of the GMTI sensor, early detection of stopping targets is demonstrated     

区域杂波估计的多目标跟踪方法

高斯粒子概率假设密度（PHD）滤波往往假定杂波密度参数已知,这种做法对于实际应用是不现实的。此外,杂波的参数值通常依赖于环境条件,可能随时间发生变化。因此,多目标跟踪算法中需要实时准确估计杂波密度的参数。基于此,提出了一种多目标跟踪的区域杂波估计方法。首先根据量测信息在线估计出场景中的杂波数目,然后估计落入目标附近感兴趣区域的杂波数,并估计每个目标感兴趣区域杂波强度。仿真结果表明,在复杂场景下算法的跟踪性能明显优于未进行杂波估计的多目标跟踪算法,提高了跟踪的实时性和跟踪精度。     

HRR Detector for Slow-Moving Targets in Sea Clutter

The radar detection of targets in the presence of sea clutter has historically relied upon the radial velocity of targets with respect to the radar platform either by exploiting the relative target Dopplers (for targets with sufficient radial velocity) or by discerning the paths targets traverse from scan to scan. For targets with little to no radial velocity component, though, it can become quite difficult to differentiate targets from the surrounding sea clutter. This paper addresses the detection of slow-moving targets in sea clutter using a high resolution radar (HRR) such that the target has perceptible extent in range. Under the assumption of completely random sea clutter spikes based on an epsiv-contaminated mixture model with the signal and clutter powers known, optimal detection performance results from using the likelihood ratio test (LRT). However, for realistic sea clutter, the clutter spikes tend to be a localized phenomenon. Based upon observations from real radar data measurements, a heuristic approach exploiting a salient aspect of the idealized LRT is developed which is shown to perform well when applied to real measured sea clutter.