Contingency and recovery options for the European Student Moon Orbiter

This paper presents an overview of the analysis performed on the lunar orbit and some of the possible contingencies for the European Student Moon Orbiter (ESMO). Originally scheduled for launch in 2014 –2015 as a piggyback payload, it was the only ESA planned mission to the Moon. By way of a weak stability boundary transfer, ESMO is inserted into an orbit around the Moon. Propellant use is at a premium, so the operational orbit is selected to be highly eccentric. In addition, an optimization is presented to achieve an orbit that is stable for 6 months without requiring orbit maintenance. A parameter study is undertaken to study the sensitivity of the lunar orbit insertion. A database of transfer solutions across 2014 and 2015 is used to study the relation between the robustness of weak capture and the planetary geometry at lunar arrival. A number of example recovery scenarios, where the orbit insertion maneuver partially or completely fails, are also considered.     

Low-energy Earth–Moon transfers involving manifolds through isomorphic mapping

Analysis and design of low-energy transfers to the Moon has been a subject of great interest for decades. Exterior and interior transfers, based on the transit through the regions where the collinear libration points are located, have been studied for a long time and some space missions have already taken advantage of the results of these studies. This paper is concerned with a geometrical approach for low-energy Earth-to-Moon mission analysis, based on isomorphic mapping. The isomorphic mapping of trajectories allows a visual, intuitive representation of periodic orbits and of the related invariant manifolds, which correspond to tubes that emanate from the curve associated with the periodic orbit. Two types of Earth-to-Moon missions are considered. The first mission is composed of the following arcs: (i) transfer trajectory from a circular low Earth orbit to the stable invariant manifold associated with the Lyapunov orbit at L₁ (corresponding to a specified energy level) and (ii) transfer trajectory along the unstable manifold associated with the Lyapunov orbit at L₁, with final injection in a periodic orbit around the Moon. The second mission is composed of the following arcs: (i) transfer trajectory from a circular low Earth orbit to the stable invariant manifold associated with the Lyapunov orbit at L₁ (corresponding to a specified energy level) and (ii) transfer trajectory along the unstable manifold associated with the Lyapunov orbit at L₁, with final injection in a capture (non-periodic) orbit around the Moon. In both cases three velocity impulses are needed to perform the transfer: the first at an unknown initial point along the low Earth orbit, the second at injection on the stable manifold, the third at injection in the final (periodic or capture) orbit. The final goal is in finding the optimization parameters, which are represented by the locations, directions, and magnitudes of the velocity impulses such that the overall delta-v of the transfer is minimized. This work proves how isomorphic mapping (in two distinct forms) can be profitably employed to optimize such transfers, by determining in a geometrical fashion the desired optimization parameters that minimize the delta-v budget required to perform the transfer.     

地-月低能耗转移轨道中途修正问题研究

采用地-月低能耗转移轨道的探测器从地球停泊轨道转移到极月轨道一般需要3~4个月时间,这类转移轨道对入轨精度有较高的要求。本文对地月转移轨道中途修正问题进行了研究。文中结合地-月低能耗转移轨道的特点,给出一种分段式多目标多次中途修正方案。利用显式制导结合牛顿迭代,分别以地球和月球作为中心天体求解兰伯特问题,在假设探测器各种轨道误差的基础上进行了蒙特卡罗仿真。采用该方法一般需要3~5次中途修正能够满足月球探测器环月轨道入轨精度要求,整个转移过程燃料消耗小于传统地月转移轨道。文中给出的仿真结果验证了该方案的可行性。     

Autonomous optical navigation for orbits around Earth–Moon collinear libration points

The analysis of optical navigation in an Earth–Moon libration point orbit is examined. Missions to libration points have been winning momentum during the last decades. Its unique characteristics make it suitable for a number of operational and scientific goals. Literature aimed to study dynamics, guidance and control of unstable orbits around collinear libration points is vast. In particular, several papers deal with the optimisation of the Δv budget associated to the station-keeping of these orbits. One of the results obtained in literature establishes the critical character of the Moon–Earth system in this aspect. The reason for this behaviour is twofold: high Δv cost and short optimal manoeuvre spacing. Optical autonomous navigation can address the issue of allowing a more flexible manoeuvre design. This technology has been selected to overcome similar difficulties in other critical scenarios. This paper analyses in detail this solution. A whole GNC system is defined to meet the requirements imposed by the unstable dynamic environment. Finally, a real simulation of a spacecraft following a halo orbit of the L2 Moon–Earth system is carried out to assess the actual capabilities of the optical navigation in this scenario.     

基于地月信息的奔月探测器自主光学导航

基于地月信息提出了一种奔月转移轨道的自主光学导航算法。该算法首先利用导航相机得到的地球和月球边缘图像与地、月几何形状模型，运用扩展源的空间获取算法导出地心和月心对应的像素，然后利用地心和月心像素、探测器的惯性姿态和该观测历元的地、月星历信息，通过基于UD分解的递推加权最小二乘算法确定了探测器轨道。还引入导航系统的可观度定义来分析了导航系统的可观性，数学仿真结果表明导航的位置误差小于30km，速度误差小于0．3m／s，证明该自主光学导航算法是有效的。     

Manifold dynamics in the Earth–Moon system via isomorphic mapping with application to spacecraft end-of-life strategies

Recently, manifold dynamics has assumed an increasing relevance for analysis and design of low-energy missions, both in the Earth–Moon system and in alternative multibody environments. With regard to lunar missions, exterior and interior transfers, based on the transit through the regions where the collinear libration points L₁ and L₂ are located, have been studied for a long time and some space missions have already taken advantage of the results of these studies. This paper is focused on the definition and use of a special isomorphic mapping for low-energy mission analysis. A convenient set of cylindrical coordinates is employed to describe the spacecraft dynamics (i.e. position and velocity), in the context of the circular restricted three-body problem, used to model the spacecraft motion in the Earth–Moon system. This isomorphic mapping of trajectories allows the identification and intuitive representation of periodic orbits and of the related invariant manifolds, which correspond to tubes that emanate from the curve associated with the periodic orbit. Heteroclinic connections, i.e. the trajectories that belong to both the stable and the unstable manifolds of two distinct periodic orbits, can be easily detected by means of this representation. This paper illustrates the use of isomorphic mapping for finding (a) periodic orbits, (b) heteroclinic connections between trajectories emanating from two Lyapunov orbits, the first at L₁, and the second at L₂, and (c) heteroclinic connections between trajectories emanating from the Lyapunov orbit at L₁ and from a particular unstable lunar orbit. Heteroclinic trajectories are asymptotic trajectories that travels at zero-propellant cost. In practical situations, a modest delta-v budget is required to perform transfers along the manifolds. This circumstance implies the possibility of performing complex missions, by combining different types of trajectory arcs belonging to the manifolds. This work studies also the possible application of manifold dynamics to defining suitable, convenient end-of-life strategies for spacecraft orbiting the Earth. Seven distinct options are identified, and lead to placing the spacecraft into the final disposal orbit, which is either (a) a lunar capture orbit, (b) a lunar impact trajectory, (c) a stable lunar periodic orbit, or (d) an outer orbit, never approaching the Earth or the Moon. Two remarkable properties that relate the velocity variations with the spacecraft energy are employed for the purpose of identifying the optimal locations, magnitudes, and directions of the velocity impulses needed to perform the seven transfer trajectories. The overall performance of each end-of-life strategy is evaluated in terms of time of flight and propellant budget.     

基于电火箭推进的地-月轨道转移自主导航研究

以电推进力作为奔月航天器在进入月球影响球之后的螺旋式减速转移过程的主推进力和姿态控制力,建立限制性三体力学模型.采用星光导航方式,结合UKF非线性滤波方法进行自主导航研究.推力的引入方式能有效抑制由于航天器姿态与导航误差耦合而导致的推力矢量方向误差.通过大量的计算机仿真,详细研究和分析了电推进条件下自主导航的发散问题,有针对性地给出了抑止发散的方法,为工程实现提供了有利的参考依据.     

地月平动点拟周期轨道探测器自主导航方法研究

地月L2点的拟周期轨道可以用于实现与月球背面的持续通信,具有重要的科学研究价值和广阔的应用前景。针对地月L2点探测器所处的弱稳定拟周期轨道,论证了基于日地月信息的自主导航方法的可行性,并进行了深入分析。首先,推导了会合坐标系下带有星历的精确导航动力学方程;其次,针对弱稳定轨道不同于近地强稳定轨道的特性,在基于日地月方位信息导航的基础上,提出了三种敏感器组合方案。使用迭代最小二乘方法给出导航仿真结果,并结合非线性可辨识性理论对这三种情况下历元状态的可辨识性及可辨识度进行分析。最后,仿真结果表明,使用日地月敏感器以及对地多普勒雷达可以满足历元状态的可辨识性、导航的收敛性以及系统经济性的要求。     

利用雷达高度计及星敏感器的多处理器卫星导航

鉴于当前单一处理器导航计算机结构给导航算法带来的约束及并行多处理器技术的日益成熟，提议卫星导航采用两个处理器并行的计算机结构，将卫星自主导航工作中轨道状态估计和状态预报分外在不同的处理器上处理。依据这一分工思路，提出近地海洋卫星利用雷达高度计及星敏感器实现自主导航的方法，并给出一个简单的导航模型及导航算法。通过计算机仿真检验了利用雷达高度计及星敏感器为近地海洋卫星提供导航的可行性，也验证了导航结构的适用性。     

Low cost planetary exploration: surrey lunar minisatellite and interplanetary platform missions

In order to meet the growing global requirement for affordable missions beyond Low Earth Orbit, two types of platform are under design at the Surrey Space Centre. The first platform is a derivative of Surrey's UoSAT-12 minisatellite, launched in April 1999 and operating successfully in-orbit. The minisatellite has been modified to accommodate a propulsion system capable of delivering up to 1700 m/s delta-V, enabling it to support a wide range of very low cost missions to LaGrange points, Near-Earth Objects, and the Moon. A mission to the Moon - dubbed “MoonShine” - is proposed as the first demonstration of the modified minisatellite beyond LEO. The second platform - Surrey's Interplanetary Platform - has been designed to support missions with delta-V requirements up to 3200 m/s, making it ideal for low cost missions to Mars and Venus, as well as Near Earth Objects (NEOs) and other interplanetary trajectories. Analysis has proved mission feasibility, identifying key challenges in both missions for developing cost-effective techniques for: spacecraft propulsion; navigation; autonomous operations; and a reliable safe mode strategy. To reduce mission risk, inherently failure resistant lunar and interplanetary trajectories are under study. In order to significantly reduce cost and increase reliability, both platforms can communicate with low-cost ground stations and exploit Surrey's experience in autonomous operations. The lunar minisatellite can provide up to 70 kg payload margin in lunar orbit for a total mission cost US$16–25 M. The interplanetary platform can deliver 20 kg of scientific payload to Mars or Venus orbit for a mission cost US$25–50 M. Together, the platforms will enable regular flight of payloads to the Moon and interplanetary space at unprecedented low cost. This paper outlines key systems engineering issues for the proposed Lunar Minisatellite and interplanetary Platform Missions, and describes the accommodation and performance offered to planetary payloads.     

Optimal ballistically captured Earth–Moon transfers

The optimality of a low-energy Earth–Moon transfer terminating in ballistic capture is examined for the first time using primer vector theory. An optimal control problem is formed with the following free variables: the location, time, and magnitude of the transfer insertion burn, and the transfer time. A constraint is placed on the initial state of the spacecraft to bind it to a given initial orbit around a first body, and on the final state of the spacecraft to limit its Keplerian energy with respect to a second body. Optimal transfers in the system are shown to meet certain conditions placed on the primer vector and its time derivative. A two point boundary value problem containing these necessary conditions is created for use in targeting optimal transfers. The two point boundary value problem is then applied to the ballistic lunar capture problem, and an optimal trajectory is shown. Additionally, the problem is then modified to fix the time of transfer, allowing for optimal multi-impulse transfers. The tradeoff between transfer time and fuel cost is shown for Earth–Moon ballistic lunar capture transfers.     

地-月系平动点及Halo轨道的应用研究

地-月系统的平动点L1点及L2点的Halo轨道在探月工程中有重要的应用价值，可分别用于地月连续通信覆盖和月球背面的探测。由于在地-月系统中太阳的引力不可忽略，特别是在长时间作用以后，其动力学行为与摄动力较小的日-地系统有明显的不同。本文分析了如何利用太阳引力进入地-月系统的L1点及L2点的Halo轨道、以及由Halo轨道进入近月轨道的问题，两者综合起来构成了一条完整的地月低能转移轨道。研究结果对探月轨道设计有一定的参考价值。     

Sсheme of rendezvous mission to lunar orbital station by spacecraft launched from Earth

In recent years, great experience has been accumulated in manned flight astronautics for rendezvous in near-Earth orbit. During flights of Apollo spacecraft with crews that landed on the surface of the Moon, the problem of docking a landing module launched from the Moon’s surface with the Apollo spacecraft’s command module in a circumlunar orbit was successfully solved. A return to the Moon declared by leading space agencies requires a scheme for rendezvous of a spacecraft launched from an earth-based cosmodromee with a lunar orbital station. This paper considers some ballistic schemes making it possible to solve this problem with minimum fuel expenditures.     

Applications of multi-body dynamical environments: The ARTEMIS transfer trajectory design

The application of forces in multi-body dynamical environments to permit the transfer of spacecraft from Earth orbit to Sun–Earth weak stability regions and then return to the Earth–Moon libration (L₁ and L₂) orbits has been successfully accomplished for the first time. This demonstrated that transfer is a positive step in the realization of a design process that can be used to transfer spacecraft with minimal Delta-V expenditures. Initialized using gravity assists to overcome fuel constraints; the ARTEMIS trajectory design has successfully placed two spacecrafts into Earth–Moon libration orbits by means of these applications.     

从月球逃逸探测小行星的发射机会搜索

从月球逃逸探测小行星的发射机会搜索因需考虑日、地、月引力的影响而使问题变得复杂。针对该多体系统的发射机会搜索问题,提出了一种分层渐近的搜索方法。该方法首先通过分析地月系质心与小行星的几何关系,搜索从地月系质心到小行星的发射机会,进而以地月运动为研究对象,推导出了从月球轨道切向逃逸机会的判别条件,并基于此判别条件及等高线图法对逃逸机会进行了搜索。同时,为提高所得发射机会在多体模型下的轨道修正收敛性,给出了基于月心逃逸轨道参数为终端约束的日-地与日-地-月动力学模型的轨道渐近修正方法。最后,以近地小行星(3908)Nyx和(190491)2000 FJ20为例,搜索其从月球逃逸的发射机会,仿真计算表明了该方法的有效性。     

嫦娥五号探测器多圈调相地月转移应急轨道设计与分析

针对嫦娥五号任务上升段末期火箭二级发动机可能出现的提前关机故障造成入轨半长轴偏差较大和中途修正速度增量超限问题,提出了多圈调相地月转移轨道应急控制策略.首先,分析了不同入轨半长轴偏差、中途修正时刻与中途修正速度增量消耗之间的关系;其次,针对半长轴偏差较大问题,基于微分改正算法与B平面参数,设计了解析窗口搜索与多圈调相地...     

载人月球极地探测地月转移轨道设计

针对载人月球极地探测任务,采用一种自由返回轨道与三脉冲机动轨道相结合的地月转移轨道方案。关于自由返回轨道部分的设计,建立了基于近月点伪参数的两段拼接模型,采用一种考虑地球扁率修正的改进多圆锥截线法进行求解,仿真结果显示改进的多圆锥截线法具有更高的求解精度,可为精确设计提供更好的初值;关于三脉冲机动轨道部分的设计,基于混合轨道模型,采用特殊点变轨和Lambert算法相结合的方法进行计算,仿真结果显示该方法能够有效地降低速度增量的消耗。最后,通过大量的仿真计算,对轨道的速度增量特性进行了分析。研究结论可为未来载人月球极地探测地月转移轨道方案的设计提供重要参考。     

基于模型预测的轨道自主快速大机动控制

为改善太阳同步轨道(SSO)卫星轨道大机动经典控制方法的性能,提出了一种基于卫星动力学模型预测的轨道自主机动控制算法,用大推力轨控发动机开环控制加小推力器闭环修正进行控制。给出了制导策略和算法流程。理论分析和仿真结果表明,该控制算法适于卫星轨道自主快速机动控制,其轨控精度较高,收敛时间可满足快速性要求。     

基于高轨导航接收机的自动化地面测试系统

高轨卫星导航接收机是实现高轨航天器自主定轨的核心设备。为在地面测试阶段对高轨卫星导航接收机进行充分高效的验证，亟需设计基于高轨卫星导航接收机的地面测试系统。设计了一种基于高轨卫星导航接收机的自动化地面测试系统，主要创新点如下：第一，本系统可对高轨卫星导航接收机实际在轨状态下接收到的导航星座信号进行仿真；第二，具有模拟包含北斗三号等多导航卫星星座信号的功能；第三，本系统充分考虑自动化、通用化与一体化设计。提出的基于高轨卫星导航接收机的自动化地面测试系统能够在地面测试阶段对高轨卫星导航接收机进行充分验证，并充分考虑测试实施，从自动化、通用化、一体化方面提升测试效率，减少人为操作失误导致的质量问题，解决人工判读带来的误判漏判问题。     

导航星座整网自主定轨的动力学短弧段伪逆平差法

针对传统静态自由网平差进行自主定轨存在的秩亏问题,提出一种卫星动力学短弧段定轨和自由网伪逆平差理论相结合的自主定轨算法。该算法以导航星座星间链路(ISL)双向测距为基础,利用伪逆平差法,解决整网位置解算起算数据不足带来的秩亏问题;同时,利用轨道动力学建立不同历元之间状态转移关系,解决单历元平差无法对速度分量进行有效估计的问题。仿真结果表明,自主运行90天,平均用户测距精度（URE）小于1 m（2σ）,优于导航星座自主运行指标要求,验证了本文算法的有效性。