Tracking filters and models for seeker applications

Two-state tracking filters are considered for seeker applications. Estimation of the line-of-sight (LOS) rate is the main purpose and equations of motion for the LOS are discussed and simplified for design. An observer approach is applied, the filter transfer functions are given and the gain is designed by pole placement. Also a measurement time delay is taken into account. The filter properties are investigated for deterministic LOS rotations, which is a case of practical interest, corresponding to target maneuvers. The influence of measurement noise is also considered     

Road-map assisted ground moving target tracking

Tracking ground targets with airborne GMTI (ground moving target indicator) sensor measurements proves to be a challenging task due to high target density, high clutter, and low visibility. The exploitation of nonstandard background information such as road maps and terrain information is therefore highly desirable for the enhancement of track quality and track continuity. The present paper presents a Bayesian approach to incorporate such information consistently. It is particularly suited to deal with winding roads and networks of roads. The target dynamics is modeled in quasi one-dimensional road coordinates and mapped onto ground coordinates using linear road segments taking road map errors into account. The case of several intersecting roads with different characteristics, such as mean curvature, slope, or visibility, is treated within an interacting multiple model (IMM) scheme. Targets can be masked both by the clutter notch of the sensor and by terrain obstacles. Both effects are modeled using a sensor-target state dependent detection probability. The iterative filter equations are formulated within a framework of Gaussian sum approximations on the one hand and a particle filter approach on the other hand. Simulation results for single targets taken from a realistic ground scenario show strongly reduced target location errors compared with the case of neglecting road-map information. By modeling the clutter notch of the GMTI sensor, early detection of stopping targets is demonstrated     

A minimax approach to the design of Doppler filters

The detection of a target in correlated clutter, thermal noise, and extraneous interference is considered. The amplitude, phase and Doppler frequency of the signal are not known a priori. A general criterion is presented which measures the performance of a suboptimal test relative to an optimal test. The criterion is encompassed into a design procedure used to design Doppler filters. The procedure allows many design considerations to be taken into account, and results in a design which attempts to minimize the number of filters required. For low dimensionality the procedure results in single filter designs; for higher dimensionality multiple filters are designed. The performances of these systems are compared with the results obtained by Emerson (1978) and Andrews (1974). It is found that the procedure yields good filter designs under general conditions and may reduce the number of filters required compared with classical designs     

A Poisson multi-Bernoulli mixture filter with spawning based on Kullback–Leibler divergence minimization

In the classical form, the Poisson Multi-Bernoulli Mixture (PMBM) filter uses a PMBM density to describe target birth, surviving, and death, which does not model the appearance of spawned targets. Although such a model can handle target birth, surviving, and death well, its performance may degrade when target spawning arises. The reason for this is that the original PMBM filter treats the spawned targets as birth targets, ignoring the surviving targets’ information. In this paper, we propose a Kullback–Leibler Divergence (KLD) minimization based derivation for the PMBM prediction step, including target spawning, in which the spawned targets are modeled using a Poisson Point Process (PPP). Furthermore, to improve the computational efficiency, three approximations are used to implement the proposed algorithm, such as the Variational Multi-Bernoulli (VMB) filter, the Measurement-Oriented marginal MeMBer/Poisson (MOMB/P) filter, and the Track-Oriented marginal MeMBer/Poisson (TOMB/P) filter. Finally, simulation results demonstrate the validity of the proposed filter by using the spawning model in these three approximations.     

密集杂波背景下的水下多目标跟踪方法

水下多目标跟踪是水声信号处理领域研究的热点和难点问题。高斯混合概率假设密度(Gaussian mixture probability hypothesis density, GM-PHD)滤波器以其高效的计算效率为解决水下多目标跟踪问题提供了保证。然而,GM-PHD滤波器在跟踪目标时需要先验已知新生目标的强度,否则其性能会出现严重退化。针对该问题,提出一种滑动窗两步初始化高斯混合概率假设密度(sliding window two step initialization GM-PHD, SWTSI-GMPHD)滤波器。将提出的滑动窗两步初始化方法嵌入GM-PHD滤波器,利用滑动窗两步初始化方法估计新生目标强度,减少杂波干扰导致跟踪结果中出现的虚假目标。仿真实验表明,在杂波密集环境下,相较于其他跟踪方法,提出方法将跟踪精度提高69.84%,52.62%和41.05%。     

星载红外探测阵列对导弹跟踪定位的研究

通过分析研究建立了前视红外探测阵列 (FL IR)对导弹进行精确跟踪、定位的数学模型 ,其中包括导弹的运动模型、大气干扰模型和探测阵列的观测模型。根据探测阵列的原始观测数据 ,利用扩展卡尔曼滤波器 (EKF)精确跟踪导弹目标。由于导弹与探测器的距离较远 ,故可视为点目标。导弹在探测阵列上投影的位置由两部分组成 :导弹真实运动位置和由于大气干扰造成的偏移。滤波器分别估计了这两种位移在探测阵列上的变化。最后用蒙特卡罗方法分析了滤波器的性能。     

Optical guidance for autonomous landing of spacecraft

An autonomous rendezvous guidance scheme for spacecraft to descend to small celestial bodies by using optical information is presented. First, a new guidance, navigation, and control (GNC) method based on fixation-point (FP) inheritance is proposed. A spacecraft can safely descend toward the target point on the celestial body by tracking and autonomously renewing the FPs on the surface. Next, we deal with the method of extracting the FPs. A spatial band-pass filter (BPF) is applied to pictures taken to enhance features having comparable size with the tracking window. Local variance of the filtered image is used as a criterion of the extraction. Then, the relative information between the spacecraft and the celestial body (position, velocity, attitude, etc.) is calculated from the image coordinates and the range measurements of the FPs from the spacecraft. To suppress observation noise and improve navigation accuracy, an application of the extended Kalman filter is also presented. Finally, simulations are conducted to verify the guidance precision and the fuel consumption of the proposed guidance scheme     

PHD filters of higher order in target number

The multitarget recursive Bayes nonlinear filter is the theoretically optimal approach to multisensor-multitarget detection, tracking, and identification. For applications in which this filter is appropriate, it is likely to be tractable for only a small number of targets. In earlier papers we derived closed-form equations for an approximation of this filter based on propagation of a first-order multitarget moment called the probability hypothesis density (PHD). In a recent paper, Erdinc, Willett, and Bar-Shalom argued for the need for a PHD-type filter which remains first-order in the states of individual targets, but which is higher-order in target number. In this paper we show that this is indeed possible. We derive a closed-form cardinalized PHD (CPHD) filter, which propagates not only the PHD but also the entire probability distribution on target number.     

一种基于三维到达角的无偏伪线性卡尔曼滤波

为了解决大场景下基于三维到达角的目标跟踪问题，提出了一种具有无偏性的伪线性卡尔曼滤波。首先，基于三维到达角信息对目标运动模型与量测模型进行建模；之后，对量测模型进行了伪线性化处理，得到了线性形式的目标量测模型。为了解决伪线性卡尔曼滤波存在的有偏性问题，提出了一种结合EKF（extend Kalman filter）的三维伪线性无偏卡尔曼滤波。仿真实验表明，该模型能够对非机动目标与机动目标有效跟踪，对于百公里级别的目标，当角测量误差从0.1°变化到0.5°，算法在仿真时间结束时均能将绝对位置误差降低至10 km以内，且算法的运行速度与EKF为同一个量级，同时兼顾了抗干扰能力、定位跟踪精度、运行效率的要求，能够为大场景下的目标跟踪提供有效方法。     

Multiple model nonlinear filtering for low signal ground target applications

The design and implementation of a multiple model nonlinear filter (MMNLF) for ground target tracking using ground moving target indicator (GMTI) radar measurements is described. Like the well-known interacting multiple model Kalman filter (IMMKF), the MMNLF is based on the theory of hybrid stochastic systems. However, since it models the probability distribution for the target in a region, rather than just the distribution's first and second moments, a nonlinear filter is able to capture more fine-grained detail of the target motion and requires fewer models than typical IMMKF implementations. This is illustrated here with a two-model MMNLF in which one motion model incorporates terrain constraints while the second is a nearly constant velocity (CV) model. Another feature of the MMNLF is that it enables incorporation of prethresholded measurements. To implement the filter, the target state conditional probability density is discretized on a set of moving grids and recursively updated with sensor measurements via Bayes' formula. The conditional density is time updated between sensor measurements using alternating direction implicit (ADI) finite difference methods, generalized for this hybrid application. In simulation testing against low signal-to-interference-plus-noise ratio (SINR) targets, the MMNLF is able to maintain track in situations where single model filters based on either of the component models or filters that use thresholded data fail. Potential applications of this work include detection and tracking of foliage-obscured moving targets.     

Automatic target classification of slow moving ground targets in clutter

A new approach is proposed which will allow air-to-ground target classification of slow moving vehicles in clutter. A wideband space-time adaptive (STAP) filter architecture, based on subbanding, is developed and coupled with a one dimensional template-based minimum mean squared error (MMSE) classifier. The performance of this STAP/ATC (automatic target classification) algorithm is quantified using an extensive simulation. The level of residual clutter afforded by various filter configurations and the associated incremental improvement in ATC performance is quantified, revealing the potential for realizable hardware and software implementations to achieve acceptable ATC performance.     

Multiple-Model Probability Hypothesis Density Filter for Tracking Maneuvering Targets

Tracking multiple targets with uncertain target dynamics is a difficult problem, especially with nonlinear state and/or measurement equations. With multiple targets, representing the full posterior distribution over target states is not practical. The problem becomes even more complicated when the number of targets varies, in which case the dimensionality of the state space itself becomes a discrete random variable. The probability hypothesis density (PHD) filter, which propagates only the first-order statistical moment (the PHD) of the full target posterior, has been shown to be a computationally efficient solution to multitarget tracking problems with a varying number of targets. The integral of PHD in any region of the state space gives the expected number of targets in that region. With maneuvering targets, detecting and tracking the changes in the target motion model also become important. The target dynamic model uncertainty can be resolved by assuming multiple models for possible motion modes and then combining the mode-dependent estimates in a manner similar to the one used in the interacting multiple model (IMM) estimator. This paper propose a multiple-model implementation of the PHD filter, which approximates the PHD by a set of weighted random samples propagated over time using sequential Monte Carlo (SMC) methods. The resulting filter can handle nonlinear, non-Gaussian dynamics with uncertain model parameters in multisensor-multitarget tracking scenarios. Simulation results are presented to show the effectiveness of the proposed filter over single-model PHD filters.     

Estimation of Aircraft Target Motion Using Orientation Measurements

A new approach to estimating motion of a highly maneuverable aircraft target in an air-to-air tracking scenario is presented. An interactive filter system is developed that provides an improved estimate of target motion states by conditioning kinematic filter estimates on target aspect angle data. Pattern recognition techniques used with an electrooptical tracker are presumed to provide this target aspect information. A target orientation filter processes the aspect angle measurements by statistically weighting measured aspect angles with the current best estimate of target kinematics. The aerodynamic lift equation is used to relate approximate angle of attack to target velocity and acceleration. A novel statistical model for aircraft target normal acceleration is also developed to represent better the unknown target accelerations. Simulation results of realistic three-dimensional scenarios are presented to evaluate the performance of the interactive filter system.     

Probability hypothesis density filter with adaptive parameter estimation for tracking multiple maneuvering targets

The probability hypothesis density (PHD) filter has been recognized as a promising tech-nique for tracking an unknown number of targets. The performance of the PHD filter, however, is sensitive to the available knowledge on model parameters such as the measurement noise variance and those associated with the changes in the maneuvering target trajectories. If these parameters are unknown in advance, the tracking performance may degrade greatly. To address this aspect, this paper proposes to incorporate the adaptive parameter estimation (APE) method in the PHD filter so that the model parameters, which may be static and/or time-varying, can be estimated jointly with target states. The resulting APE-PHD algorithm is implemented using the particle filter (PF), which leads to the PF-APE-PHD filter. Simulations show that the newly proposed algorithm can correctly identify the unknown measurement noise variances, and it is capable of tracking mul-tiple maneuvering targets with abrupt changing parameters in a more robust manner, compared to the multi-model approaches.     

Tracking a ballistic target: comparison of several nonlinear filters

This paper studies the problem of tracking a ballistic object in the reentry phase by processing radar measurements. A suitable (highly nonlinear) model of target motion is developed and the theoretical Cramer-Rao lower bounds (CRLB) of estimation error are derived. The estimation performance (error mean and standard deviation; consistency test) of the following nonlinear filters is compared: the extended Kalman filter (EKF), the. statistical linearization, the particle filtering, and the unscented Kalman filter (UKF). The simulation results favor the EKF; it combines the statistical efficiency with a modest computational load. This conclusion is valid when the target ballistic coefficient is a priori known.     

An Adaptive Two-Dimensional Kalman Tracking Filter

A continuously adaptive two-dimensional Kalman tracking filter for a low data rate track-while-scan (TWS) operation is introduced which enhances the tracking of maneuvering targets. The track residuals in each coordinate, which are a measure of track quality, are sensed, normalized to unity variance, and then filtered in a single-pole filter. The magnitude Z of the output of this single-pole filter, when it exceeds a threshold Z1 is used to vary the maneuver noise spectral density q in the Kalman filter model in a continuous manner. This has the effect of increasing the tracking filter gains and containing the bias developed by the tracker due to the maneuvering target. The probability of maintaining track, with reasonably sized target gates, is thus increased, The operational characteristic of q versus Z assures that the tracker gains do not change unless there is high confidence that a maneuver is in progress.     

捷联激光制导的视线信号提取方法

提出了一种弹目视线角信号的提取方法,该方法采用UKF解耦,针对捷联激光制导炸弹需要攻击移动目标却不能测量弹目相对距离和速度的情况,建立了弹目相对运动模型,解耦过程不需要相对距离信息,能够更方便地应用于工程实践.经仿真验证,此方法可以较好地估计出弹目视线角以及角速率信息,能够满足捷联激光制导炸弹工程应用的需要.     

Track labeling and PHD filter for multitarget tracking

Multiple target tracking requires data association that operates in conjunction with filtering. When multiple targets are closely spaced, the conventional approaches (as, e.g., MHT/assignment) may not give satisfactory results. This is mainly because of the difficulty in deciding what the number of targets is. Recently, the probability hypothesis density (PHD) filter has been proposed and particle filtering techniques have been developed to implement the PHD filter. In the particle PHD filter, the track labeling problem is not considered, i.e., the PHD is obtained only for a frame at a time, and it is very difficult to perform the multipeak extraction, particularly in high clutter environments. A track labeling method combined with the PHD approach, as well as considering the finite resolution, is proposed here for multitarget tracking, i.e., we keep a separate tracker for each target, use the PHD in the resolution cell to get the estimated number and locations of the targets at each time step, and then perform the track labeling ("peak-to-track" association), whose results can provide information for PHD peak extraction at the next time step. Besides, by keeping a separate tracker for each target, our approach provides more information than the standard particle PHD filter. For example, in group target tracking, if we are interested in the motion of a specific target, we can track this target, which is not possible for the standard particle PHD filter, since the standard particle PHD filter does not keep track labels. Using our approach, multitarget tracking can be performed with automatic track initiation, maintenance, spawning, merging, and termination     

Sequential nonlinear tracking using UKF and raw range-rate measurements

The three-dimensional (3D) converted measurements filtering (CMF) with both converted position and raw range-rate measurement is proposed to solve the Doppler radar target tracking, where the error between radar-target range and range rate are correlated. Firstly, not using pseudomeasurement constructed by product of range and range rate to reduce the high nonlinearity, the raw range-rate measurements are utilized by unscented Kalman filter (UKF), where the converted errors of the position and the range rate are decorrelated, then linear part (position measurements) and nonlinear part (range-rate measurement) are sequentially processed by Kalman filter (KF) and UKF. Secondly, based on the assumption of small measurement error, the mean and covariance of converted measurement errors are derived by second-order Taylor series expansion. Finally, the influence of the correlated coefficient rho between the range and range rate, and the range-rate noise deviation sigma_r are taken into account and extreme values of rho and sigma_r are used in Monte Carlo simulations. The results show that the proposed method is, in a sense, effective and practical     

Null phase-shift polarization filtering for high-frequency radar

In order to effectively cancel the interference in polarization filtering, the parameters of the polarization filter should timely adapt to the variation of the polarization of the interference, which may impact the amplitude and phase of the desired signal that passes through the same polarization filter during the coherent integration time (CIT) and render the enhancement of the signal integration a failure. To avoid this, a null phase-shift polarization (NPSP) filter is proposed, which is composed of a linear polarization transformer (LPVT), a conventional single-notch polarization (SNP) filter and an amplitude/phase compensation device (A/PCD). The interference, which has polarization different from those of the desired target signal, can be suppressed completely while the target signal remains without distortion. Some applications of high-frequency (HF) radars for suppressing the radio interference are introduced. Simulation results from the experimentally derived data indicate that the improvement of the signal-to-interference ratio (SIR) can be expected to be more than 28 dB. The proposed NPSP filter is effective in HF radar or other coherent systems.