非线性系统中多传感器目标跟踪融合算法研究

主要阐述了在非线性系统中多传感器目标跟踪的融合算法，提出了基于变换测量卡尔曼滤波器（CMKF）的分布式融合算法，从该理论出发，导出了分布式变换测量卡尔曼滤波算法（DCMKFA）几乎能够重视集中式融合估计，仿真结果证明了这一结论，因此，DCMKFA对于非线性系统中的目标跟踪是一个有效的分布式融合算法。     

基于GPS/DR/DM组合导航定位系统的研究

设计了一种基于GPS辅助以DR和DM的组合导航定位的联邦滤波器,采用GPS、DR和DM组合导航定位的设计方案的基础上,提出一种先分散式再局部集中联邦滤波器并采用一种简化的自适应联邦滤波器算法对各定位数据进行融合优化,并进行了仿真.仿真结果表明本文设计的联邦卡尔曼滤波器自适应算法对多传感器系统进行数据处理,能够提供一种最佳估计途径,在容错、数据容量及降低系统费用等方面,都比集中卡尔曼滤波器更为优越,使误差进一步减小.该设计与一般的分散卡尔曼滤波器比较,在信息综合方面更加快捷.     

基于改进粒子滤波的多传感器融合空间目标跟踪

为了跟踪空间目标,构建了基于局部粒子滤波器的多传感器融合方法估计空间目标状态。粒子滤波重要采样过程中,设计了基于融合估计的重要密度函数减少粒子贫化问题,并设计基于 McDE(Memetic compact Differ. ential Evolution)重采样策略,通过对粒子的变异与选择等进化操作来解决粒子退化问题。理论推导与仿真结果皆证明方法的有效性。     

一种分布式异步航迹融合算法

在多被动传感器目标跟踪中,融合中心处理的信息一般是同步的,然而实际情况并非如此。另外,一些被动传感器只能得到目标的方位信息,无法单独形成有效航迹,这就需要将各传感器数据同步到相同时刻,然后应用同步融合算法。针对被动传感器探测系统,采用传感器到传感器融合和系统到传感器融合的分布式融合结构,并对各局部传感器引入全局反馈,对相关信息采用协方差交叉算法进行处理,完成被动传感器异步数据的融合,仿真结果表明,该算法具有较好的融合效果。     

混合线性/非线性模型的准高斯Rao-Blackwellized粒子滤波法

 针对混合线性/非线性模型,提出一种新的递推估计滤波算法,称为准高斯Rao-Blackwellized粒子滤波器（Q-GRBPF）。算法采用Rao-Blackwellized思想,将线性状态与非线性状态进行分离,对非线性状态运用准高斯粒子滤波（Q-GPF）算法进行估计,并将其后验分布近似为单个高斯分布,再利用非线性状态的估计值对线性状态进行卡尔曼滤波（KF）估计。将Q-GRBPF应用于目标跟踪的仿真结果表明,与Rao-Blackwellized粒子滤波器（RBPF）相比,Q-GRBPF在保证估计精度的前提下有效降低了计算复杂度,计算时间约为RBPF的58%;与Q-GPF相比,x坐标与y坐标的估计精度分别提升了45％和30％,而计算时间也节省了约30％。     

基于健康蜕化的航空发动机传感器故障诊断(英文)

改进在线故障诊断算法使其能适应发动机健康蜕化是目前故障诊断所面临的困难,如果诊断算法没有自适应能力,在发动机健康蜕化后将失去其诊断功能。为了解决此问题,提出在线故障诊断算法,采用跟踪滤波器估计发动机的健康状况,机载模型根据跟踪滤波器的估计结果进行更新。更新后的机载模型能够与真实的发动机相匹配。这使得当发动机健康蜕化后在线故障诊断仍能保持其有效性。最后采用一组卡尔曼滤波器来对航空发动机传感器故障进行诊断与隔离。通过设计好的一组卡尔曼滤波器,能够诊断并隔离出故障。本文使用非线性发动机模型来验证此方法,仿真结果表明本文提出的在线诊断方法在发动机健康蜕化后仍能保持其有效性。     

一种对多传感器异步数据的融合处理方法

在传感器异步采样时刻情况下 ,对机动目标的跟踪滤波算法进行了探讨 ,基于细分时间片的方法 ,提出了一种将多传感器数据组合成类似于单传感器数据的异步数据处理方法 ,运用于目标点迹航迹的合成。通过对多传感器数据的利用 ,增大对目标观测的数据流数据率 ,来提高跟踪精度。仿真实验显示 ,各通道的均方根误差均相对减小 ,表明了算法的可行性。     

基于CDKF的快速协方差交叉融合跟踪算法研究

随着目标抗干扰能力的增强,单一寻的制导方式很难完成对目标的稳定跟踪和精确打击,需采用多种探测器作为传感器,提供多种观测数据以实现对目标的稳定跟踪和精确打击。建立了适当的目标运动模型和观测模型,利用中心差分卡尔曼滤波（CDKF）变换处理模型的非线性问题,避免了求解复杂的雅克比矩阵。对于分布式多传感器融合,传统的方法多采用协方差交叉（CI）融合方法,但是这类方法需要寻优求解。而快速协方差交叉（FCI）则不需要进行寻优过程,且计算量小。在此基础上,提出了用于多传感器目标跟踪的CDKF-FCI融合算法。最后,对算法进行了仿真分析,并进一步验证了提出算法的有效性。     

一种新的航空发动机自适应模型设计与仿真

提出了一种基于机载非线性发动机模型,且具有输入端积分补偿的卡尔曼滤波器估计器的发动机自适应模型设计方法。其主旨是经过相似变换,在非线性相对弱化的另一坐标区域内设计常规卡尔曼滤波估计器,利用所得卡尔曼估计器对各估计回路的初步解耦,进一步在各观测回路中引入输入误差积分激励,对滤波器的输入进行实时积分修正,充分实现各估计参数回路的静态解耦。同时,将该卡尔曼滤波器与机载非线性实时模型综合,从而使发动机自适应模型具有大范围无静差参数跟踪能力。最后,对所提出建立的自适应模型的参数估计能力和鲁棒性进行了数字仿真验证。     

Rao-Blackwellized粒子概率假设密度滤波算法

针对多目标跟踪（MTT）,提出一种新的基于随机集的滤波算法,称为Rao-Blackwellized粒子概率假设密度滤波算法（RBP-PHDF）。算法运用Rao-Blackwellized思想,通过挖掘分析“混合线性/非线性模型”的结构,采用序列蒙特卡罗（SMC）方法预测与估计概率假设密度（PHD）迭代式中各个目标的非线性状态,并利用非线性状态粒子中包含的信息,使用卡尔曼滤波器（KF）对线性状态进行预测与估计。以更好地估计PHD进而提高各目标状态估计精度。分析与MTT仿真的结果表明,在相同的仿真条件下,与现有序列蒙特卡罗概率假设密度滤波算法（SMC-PHDF）相比,RBP-PHDF在降低粒子维数、减少计算量的同时,有效提升了估计精度。     

基于变分贝叶斯的星载雷达非线性滤波

星载雷达由于其探测范围广、距离远、全天候等优点,在预警防御系统中占有十分重要的地位。然而,由于观测平台的高速运动以及摄动干扰、传感器观测非线性等问题,使得星载雷达目标高精度跟踪带来严峻挑战。针对星载雷达非线性状态估计问题,采用一种基于变分贝叶斯的非线性滤波方法,该方法通过将非线性状态估计问题转化为优化问题,通过迭代优化获得了闭环解析解。此外,针对坐标变换中俯仰角量测缺失问题,提出了一种基于先验目标高度的俯仰角估计方法。通过数值仿真,验证了所提方法较传统非线性滤波方法,如扩展卡尔曼滤波、不敏卡尔曼滤波、转换量测卡尔曼滤波,具有更好的估计精度。     

Design of a practical tracking algorithm with radar measurements

The extended Kalman filter (EKF) has been widely used as a nonlinear filtering method for radar tracking problems. However, it has been found that if cross-range measurement errors of the target position are large, the performance of the conventional EKF degrades considerably due to nonnegligible nonlinear effects. A new filtering algorithm for improving the tracking performance with radar measurements is developed based on the fact that correct evaluation of the measurement error covariance is possible in the Cartesian coordinate system. The proposed algorithm may be viewed as a modification of the EKF in which the variance of the range measurement errors is evaluated in an adaptive manner. The filter structure facilitates the incorporation of the sequential measurement processing scheme, and this makes the resulting algorithm favorable to both estimation accuracy and computational efficiency. Computer simulation results show that the proposed method offers superior performance in comparison to previous methods. Moreover, our developed algorithm provides some useful insight into the radar tracking problem     

自由段弹道目标跟踪算法在工程中的应用

在对弹道目标跟踪预警的工程实践中,雷达系统对目标运动的信息处理速度尤为重要,因而,文章选取自适应跟踪模型与卡尔曼滤波相结合的方法解决自由段弹道目标的跟踪问题,并与扩展卡尔曼跟踪算法做了对比分析。仿真显示,2种滤波方式分别与自适应跟踪模型相结合后,卡尔曼滤波和扩展卡尔曼滤波跟踪性能相差不大,但其算法简单、运算时间短,可以较好满足自由段弹道目标跟踪的工程需求。     

Update with out-of-sequence measurements in tracking: exact solution

In target tracking systems measurements are typically collected in "scans" or "frames" and then they are transmitted to a processing center. In multisensor tracking systems that operate in a centralized manner, there are usually different time delays in transmitting the scans or frames from the various sensors to the center. This can lead to situations where measurements from the same target arrive out of sequence. Such "out-of-sequence" measurement (OOSM) arrivals can occur even in the absence of scan/frame communication time delays. The resulting "negative-time measurement update" problem, which is quite common in real multisensor systems, was solved previously only approximately in the literature. The exact state update equation for such a problem is presented. The optimal and two suboptimal algorithms are compared on a number of realistic examples, including a GMTI (ground moving target indicator) radar case.     

IMM estimator with out-of-sequence measurements

In multisensor tracking systems that operate in a centralized information processing architecture, measurements from the same target obtained by different sensors can arrive at the processing center out of sequence. In order to avoid either a delay in the output or the need for reordering and reprocessing an entire sequence of measurements, such measurements have to be processed as out-of-sequence measurements (OOSMs). Recent work developed procedures for incorporating OOSMs into a Kalman filter (KF). Since the state of the art tracker for real (maneuvering) targets is the interacting multiple model (IMM) estimator, the algorithm for incorporating OOSMs into an IMM estimator is presented here. Both data association and estimation are considered. Simulation results are presented for two realistic problems using measurements from two airborne GMTI sensors. It is shown that the proposed algorithm for incorporating OOSMs into an IMM estimator yields practically the same performance as the reordering and in-sequence reprocessing of the measurements. Also, it is shown how the range rate from a GMTI sensor can be used as a linear velocity measurement in the tracking filter.     

通信和测量受限条件下异构多UAV分布式协同目标跟踪方法

研究了通信和测量受限的异构多无人机(UAV)网络化分布式协同目标观测与跟踪问题.该分布式UAV系统采用长机一僚机异构型网络结构,以实现在电子静默和战术隐身条件下扩大探测和打击纵深.提出改进的一致性信息滤波(ICF)算法,实现通信和测量范围内各UAV节点的分布式信息融合.由于一致性算法的收敛性与网络拓扑结构的连通性密切相...     

Removal of Out-of-Sequence Measurements from Tracks

In multisensor tracking systems that operate in a centralized or distributed information processing architecture, measurements from the same target obtained by different sensors can arrive at the processing center out of sequence due to system latencies. In order to avoid either a delay in the output or the need for reordering and reprocessing entire sequences of measurements, such latent measurements have to be processed by the tracking filter as out-of-sequence measurements (OOSM). Recent work developed a "one-step" procedure for incorporating OOSM with multiple-time-step latency into the tracking filter, which, while suboptimal, was shown to yield results very close to those obtained by reordering and reprocessing an entire sequence of measurements. The counterpart of this problem is the need to remove (revocate) measurements that have already been used to update a track state. This can happen in real-world systems when such measurements are reassigned to another track. Similarly to the problem of update with an OOSM, it is desired to carry out the removal of an earlier measurement without recomputing the track estimate (and the data association) using possibly a long sequence of subsequent measurements one at a time. A one-step algorithm is presented for this problem of removing a multistep OOSM.     

应用卡尔曼滤波的机载雷达跟踪系统

本文论述将滤波理论应用于机载雷达中对单个目标进行距离、速度、方位角和高低角跟踪的多环反馈系统。首先根据目标和天线的相对运动建立控制四坐标跟踪环所需的状态矢量微分方程,然后推导相应的非线性滤波算法。最后给出计算机的模拟结果。计算机模拟的结果清晰地说明采用最佳滤波的系统性能比通常的有很大改善,并且这种瞄准轴坐标系的最佳系统对目标的随机机动是不灵敏的。 本文所讨论的方法和得出的结论可以延用到地面雷达、舰载雷达以及其他有源和无源的跟踪系统。     

弹道导弹助推段拦截融合跟踪算法研究

针对空基雷达数据率低的特点,提出一种新的基于雷达/红外成像的机动目标跟踪信息融合算法.建立了弹道导弹目标机动模型和雷达/红外成像导引头观测方程,以动能拦截弹红外成像导引头数据更新时间为基准,以空基雷达采样周期为间隔对距离信息进行实时修正,推导了雷达/红外成像复合制导信息融合跟踪扩展卡尔曼滤波算法.仿真结果表明,该算法融...